Oxidation Study of Oleocanthal and Oleacein Induced by Oxone.

A selective Oxone-induced oxidation of oleocanthal and oleacein, the two main secoiridoids of olive oil, to their bis-oxidized products is described. This protocol is based on a Baeyer-Villiger mechanism and the concentration of Oxone in the final solution. The bis-oxidation of the aldehydic compounds could be extended for the synthesis of various semisynthetic analogs. The obtained acids exhibit strong antioxidant activity, being efficient free radical scavengers.

Portable hydrogel kit based on Michael addition reaction for (E)-2-hexenal gas detection.

Plants exhibit rapid responses to biotic and abiotic stresses by releasing a range of volatile organic compounds (VOCs). Monitoring changes in these VOCs holds the potential for the early detection of plant diseases. This study proposes a method for identifying late blight in potatoes based on the detection of (E)-2-hexenal, one of the major VOC markers released during plant infection by Phytophthora infestans. By combining the Michael addition reaction with cysteine-mediated etching of aggregation-induced emission gold nanoclusters (Au NCs), we have developed a portable hydrogel kit for on-site detection of (E)-2-hexenal. The Michael addition reaction between (E)-2-hexenal and cysteine effectively alleviates the etching of cysteine-mediated Au NCs, leading to a distinct fluorescence color change in the Au NCs, enabling a detection limit of 0.61 ppm. Utilizing the superior loading and diffusion characteristics of the three-dimensional structure of agarose hydrogel, our sensor demonstrated exceptional performance in terms of sensitivity, selectivity, reaction time, and ease of use. Moreover, quantitative measurement of (E)-2-hexenal was made easier by using ImageJ software to transform fluorescent images from the hydrogel kit into digital data. Such method was effectively used for the early detection of potato late blight. This study presents a low-cost, portable fluorescent analytical tool, offering a new avenue for on-site detection of plant diseases.

Fluorescent-based micellar incorporated hydrogel materials for selective determination of long-chain aldehydes.

A highly sensitive micelle-induced sensory has been developed for detection of long-chain aldehydes as potential biomarkers of respiratory cancers. The micelle-like sensor was fabricated through the partial self-assembly of CTAB and S2 surfactants, containing a fluorescent hydrazine-functionalized dye (Naph-NH2). In principle, long-chain aldehydes with amphiphilic character act as the induced-fit surfactants to form well-entrapped micellar particles, as well as react with Naph-NH2 to form hydrazone derivatives resulting in fluorescent enhancement. The limit of detection (LOD) of micellar Naph-NH2/CTAB/S2 platform was calculated to be ∼  64.09-80.98 µM for detection of long-chain aldehydes, which showed fluorescent imaging in lung cancer cells (A549). This micellar sensory probe demonstrated practical applicability for long-chain aldehyde sensing in human blood samples with an accepted percent recovery of ~ 94.02-102.4%. Beyond Naph-NH2/CTAB/S2 sensor, the milcellar hybrid sensor was successfully developed by incorporating a micelle-like platform with supramolecular gel regarding to carboxylate-based gelators (Gel1), which showed a tenfold improvement in sensitivity. Expectedly, the determination of long-chain aldehydes through these sensing platforms holds significant promise for point-of-care cancer diagnosis and therapy.

Electrochemical synthesis of peptide aldehydes via C‒N bond cleavage of cyclic amines.

Peptide aldehydes are crucial biomolecules essential to various biological systems, driving a continuous demand for efficient synthesis methods. Herein, we develop a metal-free, facile, and biocompatible strategy for direct electrochemical synthesis of unnatural peptide aldehydes. This electro-oxidative approach enabled a step- and atom-economical ring-opening via C‒N bond cleavage, allowing for homoproline-specific peptide diversification and expansion of substrate scope to include amides, esters, and cyclic amines of various sizes. The remarkable efficacy of the electro-synthetic protocol set the stage for the efficient modification and assembly of linear and macrocyclic peptides using a concise synthetic sequence with racemization-free conditions. Moreover, the combination of experiments and density functional theory (DFT) calculations indicates that different N-acyl groups play a decisive role in the reaction activity.

Anti-Biofilm Activity of Oleacein and Oleocanthal from Extra-Virgin Olive Oil toward Pseudomonas aeruginosa.

New antimicrobial molecules effective against Pseudomonas aeruginosa, known as an antibiotic-resistant "high-priority pathogen", are urgently required because of its ability to develop biofilms related to healthcare-acquired infections. In this study, for the first time, the anti-biofilm and anti-virulence activities of a polyphenolic extract of extra-virgin olive oil as well as purified oleocanthal and oleacein, toward P. aeruginosa clinical isolates were investigated. The main result of our study was the anti-virulence activity of the mixture of oleacein and oleocanthal toward multidrug-resistant and intermediately resistant strains of P. aeruginosa isolated from patients with ventilator-associated pneumonia or surgical site infection. Specifically, the mixture of oleacein (2.5 mM)/oleocanthal (2.5 mM) significantly inhibited biofilm formation, alginate and pyocyanin production, and motility in both P. aeruginosa strains (p < 0.05); scanning electron microscopy analysis further evidenced its ability to inhibit bacterial cell adhesion as well as the production of the extracellular matrix. In conclusion, our results suggest the potential application of the oleacein/oleocanthal mixture in the management of healthcare-associated P. aeruginosa infections, particularly in the era of increasing antimicrobial resistance.

Architecture of ß-lactoglobulin coating modulates bioinspired alginate dialdehyde-gelatine/polydopamine scaffolds for subchondral bone regeneration.

In this study, we developed polydopamine (PDA)-functionalized alginate dialdehyde-gelatine (ADA-GEL) scaffolds for subchondral bone regeneration. These polymeric scaffolds were then coated with ß-Lactoglobulin (ß-LG) at concentrations of 1 mg/ml and 2 mg/ml. Morphological analysis indicated a homogeneous coating of the ß-LG layer on the surface of network-like scaffolds. The ß-LG-coated scaffolds exhibited improved swelling capacity as a function of the ß-LG concentration. Compared to ADA-GEL/PDA scaffolds, the ß-LG-coated scaffolds demonstrated delayed degradation and enhanced biomineralization. Here, a lower concentration of ß-LG showed long-lasting stability and superior biomimetic hydroxyapatite mineralization. According to the theoretical findings, the single-state, representing the low concentration of ß-LG, exhibited a homogeneous distribution on the surface of the PDA, while the dimer-state (high concentration) displayed a high likelihood of uncontrolled interactions. ß-LG-coated ADA-GEL/PDA scaffolds with a lower concentration of ß-LG provided a biocompatible substrate that supported adhesion, proliferation, and alkaline phosphatase (ALP) secretion of sheep bone marrow mesenchymal stem cells, as well as increased expression of osteopontin (SPP1) and collagen type 1 (COL1A1) in human osteoblasts. These findings indicate the potential of protein-coated scaffolds for subchondral bone tissue regeneration. STATEMENT OF SIGNIFICANCE: This study addresses a crucial aspect of osteochondral defect repair, emphasizing the pivotal role of subchondral bone regeneration. The development of polydopamine-functionalized alginate dialdehyde-gelatine (ADA-GEL) scaffolds, coated with ß-Lactoglobulin (ß-LG), represents a novel approach to potentially enhance subchondral bone repair. ß-LG, a milk protein rich in essential amino acids and bioactive peptides, is investigated for its potential to promote subchondral bone regeneration. This research explores computationally and experimentally the influence of protein concentration on the ordered or irregular deposition, unravelling the interplay between coating structure, scaffold properties, and in-vitro performance. This work contributes to advancing ordered protein coating strategies for subchondral bone regeneration, providing a biocompatible solution with potential implications for supporting subsequent cartilage repair.

Wireless Gas Sensor Based on the Mesoporous ZnO-SnO2 Heterostructure Enables Ultrasensitive and Rapid Detection of 3-Methylbutyraldehyde.

Achieving ultrasensitive and rapid detection of 3-methylbutyraldehyde is crucial for monitoring chemical intermediate leakage in pharmaceutical and chemical industries as well as diagnosing ventilator-associated pneumonia by monitoring exhaled gas. However, developing a sensitive and rapid method for detecting 3-methylbutyraldehyde poses challenges. Herein, a wireless chemiresistive gas sensor based on a mesoporous ZnO-SnO2 heterostructure is fabricated to enable the ultrasensitive and rapid detection of 3-methylbutyraldehyde for the first time. The mesoporous ZnO-SnO2 heterostructure exhibits a uniform spherical shape (∼79 nm in diameter), a high specific surface area (54.8 m2 g-1), a small crystal size (∼4 nm), and a large pore size (6.7 nm). The gas sensor demonstrates high response (18.98@20 ppm), short response/recovery times (13/13 s), and a low detection limit (0.48 ppm) toward 3-methylbutyraldehyde. Furthermore, a real-time monitoring system is developed utilizing microelectromechanical systems gas sensors. The modification of amorphous ZnO on the mesoporous SnO2 pore wall can effectively increase the chemisorbed oxygen content and the thickness of the electron depletion layer at the gas-solid interface, which facilitates the interface redox reaction and enhances the sensing performance. This work presents an initial example of semiconductor metal oxide gas sensors for efficient detection of 3-methylbutyraldehyde that holds great potential for ensuring safety during chemical production and disease diagnosis.

Insights into the relative contribution of four precursors to 3-sulfanylhexan-1-ol and 3-sulfanylhexylacetate biogenesis during fermentation.

The desirable wine aroma compounds 3-sulfanylhexan-1-ol (3SH) and 3-sulfanylhexyl acetate (3SHA) are released during fermentation from non-volatile precursors present in the grapes. This work explores the relative contribution of four precursors (E-2-hexenal, 3-S-glutathionylhexan-1-ol, 3-S-glutathionylhexanal, and 3-S-cysteinylhexan-1-ol) to 3SH and 3SHA. Through the use of isotopically labelled analogues of these precursors in defined fermentation media, new insights into the role of each precursor have been identified. E-2-Hexenal was shown to contribute negligible amounts of thiols, while 3-S-glutathionylhexan-1-ol was the main precursor of both 3SH and 3SHA. The glutathionylated precursors were both converted to 3SHA more efficiently than 3-S-cysteinylhexan-1-ol. Interestingly, 3-S-glutathionylhexanal generated 3SHA without detectable concentrations of 3SH, suggesting possible differences in the way this precursor is metabolised compared to 3-S-glutathionylhexan-1-ol and 3-S-cysteinylhexan-1-ol. We also provide the first evidence for chemical conversion of 3-S-glutathionylhexan-1-ol to 3-S-(γ-glutamylcysteinyl)-hexan-1-ol in an oenological system.

MXene/Hydrogel-based bioelectronic nose for the direct evaluation of food spoilage in both liquid and gas-phase environments.

Various bioelectronic noses have been recently developed for mimicking human olfactory systems. However, achieving direct monitoring of gas-phase molecules remains a challenge for the development of bioelectronic noses due to the instability of receptor and the limitations of its surrounding microenvironment. Here, we report a MXene/hydrogel-based bioelectronic nose for the sensitive detection of liquid and gaseous hexanal, a signature odorant from spoiled food. In this study, a conducting MXene/hydrogel structure was formed on a sensor via physical adsorption. Then, canine olfactory receptor 5269-embedded nanodiscs (cfOR5269NDs) which could selectively recognize hexanal molecules were embedded in the three-dimensional (3D) MXene/hydrogel structures using glutaraldehyde as a linker. Our MXene/hydrogel-based bioelectronic nose exhibited a high selectivity and sensitivity for monitoring hexanal in both liquid and gas phases. The bioelectronic noses could sensitively detect liquid and gaseous hexanal down to 10-18 M and 6.9 ppm, and they had wide detection ranges of 10-18 - 10-6 M and 6.9-32.9 ppm, respectively. Moreover, our bioelectronic nose allowed us to monitor hexanal levels in fish and milk. In this respect, our MXene/hydrogel-based bioelectronic nose could be a practical strategy for versatile applications such as food spoilage assessments in both liquid and gaseous systems.

Molecular dynamics of structural effects of reactive carbonyl species derivate of lipid peroxidation on bovine serum albumin.

BACKGROUND: Serum albumin is the most abundant protein in the Mammalia blood plasma at where plays a decisive role in the transport wide variety of hydrophobic ligands. BSA undergoes oxidative modifications like the carbonylation by the reactive carbonyl species (RCSs) 4-hydroxy-2-nonenal (HNE), 4 hydroxy-2-hexenal (HHE), malondialdehyde (MDA) and 4-oxo-2-nonenal (ONE), among others. The structural and functional changes induced by protein carbonylation have been associated with the advancement of neurodegenerative, cardiovascular, metabolic and cancer diseases. METHODS: To elucidate structural effects of protein carbonylation with RCSs on BSA, parameters for six new non-standard amino acids were designated and molecular dynamics simulations of its mono­carbonylated-BSA systems were conducted in the AMBER force field. Trajectories were evaluated by RMSD, RMSF, PCA, RoG and SASA analysis. RESULTS: An increase in the conformational instability for all proteins modified with local changes were observed, without significant changes on the BSA global three-dimensional folding. A more relaxed compaction level and major solvent accessible surface area for modified systems was found. Four regions of high molecular fluctuation were identified in all modified systems, being the subdomains IA and IIIB those with the most remarkable local conformational changes. Regarding essential modes of domain movements, it was evidenced that the most representatives were those related to IA subdomain, while IIIB subdomain presented discrete changes. CONCLUSIONS: RCSs induces local structural changes on mono­carbonylated BSA. Also, this study extends our knowledge on how carbonylation by RCSs induce structural effects on proteins.

Investigation of liquid chromatography-mass spectrometry analysis of a peptide aldehyde SJA6017 with identifying its hemiacetal, gem-diol, and enol ether.

The quantitative analysis of SJA6017, a peptide aldehyde inhibitor of calpain (Calpain Inhibitor VI), has encountered challenges in preclinical drug studies. The complex reverse-phase HPLC chromatographic behavior exhibits two peaks, each containing multiple species. An liquid chromatography-mass spectrometry (LC-MS/MS) study proposed an explanation for this phenomenon, caused by the amide aldehyde structure of SJA6017. Four chemical species corresponding to the two HPLC peaks have been identified as SJA6017 and its methyl hemiacetal, methyl enol ether, and gem-diol. In many instances of preclinical studies, methanol is favored as a substitute for DMSO. The hemiacetal is formed when the amide-activated peptide aldehyde reacts with methanol, which can then be further dehydrated in the mass spectrometer ion source under high temperature to form the methyl enol ether. The hemiacetal and gem-diol can also be decomposed to SJA6017 in the ion source. Additionally, the amide-activated peptide aldehyde can easily hydrate to the gem-diol of SJA6017 during sample incubation or sample preparation. The hemiacetal and gem-diol of SJA6017 are stable enough to have different retention times in the liquid chromatography, which explains why SJA6017 appears as two peaks, each containing multiple species. An LC-MS/MS tandem quadrupole mass spectrometer quantitative analysis method is proposed, enabling the analysis of these types of samples. This work serves as both an illustrative example and a cautionary note for mass analysis, sample incubations, and sample preparations involving compounds of peptide aldehyde, including similar aldehyde-containing metabolites, especially when methanol is present. This study provides the information needed to understand peptide aldehyde behavior at various steps of preclinical in vitro studies in the presence of methanol. It has assisted in the development of the SJA6017 bioanalysis method and will also aid in the development of bioanalysis methods for similar peptide aldehydes.

Bioinspired Synthesis of Allysine for Late-Stage Functionalization of Peptides.

Inspired by the enzyme lysyl oxidase, which selectively converts the side chain of lysine into allysine, an aldehyde-containing post-translational modification, we report herein the first chemical method for the synthesis of allysine by selective oxidation of dimethyl lysine. This approach is highly chemoselective for dimethyl lysine on proteins. We highlight the utility of this biomimetic approach for generating aldehydes in a variety of pharmaceutically active linear and cyclic peptides at a late stage for their diversification with various affinity and fluorescent tags. Notably, we utilized this approach for generating small-molecule aldehydes from the corresponding tertiary amines. We further demonstrated the potential of this approach in generating cellular models for studying allysine-associated diseases.

Ultrasonic treatment enhanced the binding capacity of volatile aldehydes and pearl mussel (Hyriopsis cumingii) muscle: Investigation of underlying mechanisms.

This study was aim to investigate the influencing mechanism of ultrasonic treatment on the interaction between volatile aldehydes and myosin. The results showed that when the mass concentration ratio of myosin to heptanal/hexanal was 1:0.3, ultrasonic treatment could enhance the binding capacity of myosin to heptanal/hexanal, especially the binding of myosin to hexanal. The entropy and enthalpy values of their interaction were negative, indicating that the interaction was mainly driven by hydrogen bond and van der Waals force. After ultrasonic treatment, the fluorescence wavelength of myosin-heptanal/hexanal complex was redshifted, the α-helix content was increased, while its roughness values, particle size and the polydispersity index were decreased. These demonstrated that ultrasonic treatment was conducive to myosin binding to heptanal/hexanal, thereby restraining the release of volatile flavor compounds from myosin, which could provide new insights for the regulation of volatile flavor compounds.

Rewiring cis-2-butene-1,4-dial mediated urinary metabolomics fingerprints of short-term exposure to furan.

Furan represents one of the dietary-sourced persistent organic pollutants and thermal processing contaminants. Given its widespread occurrence in food and various toxicological effects, accurately assessing furan exposure is essential for informing public health risks. Furan is metabolized to a reactive primary product, cis-2-butene-1,4-dial (BDA) upon absorption. Some of the resulting BDA-derived metabolites have been proposed as potential exposure biomarkers of furan. However, the lack of quantification for recognized and feasible furan biomarkers has hampered the development of internal exposure risk assessment of furan. In this study, we employed reliable non-targeted metabolomics techniques to uncover urinary furan metabolites and elucidate their chemical structures. We characterized 8 reported and 11 new furan metabolites derived from the binding of BDA with glutathione (GSH), biogenic amines, and/or amino acids in the urine of male rats subjected to varying doses of furan. Notably, a mono-GSH-BDA adduct named cyclic GSH-BDA emerged as a highly prospective specific biomarker of furan exposure, as determined by an ultrahigh-performance liquid chromatography-tandem mass spectrometry method. Cyclic GSH-BDA demonstrated a robust mass spectrometry ion response intensity and exhibited evident time- and dose response. Additionally, we conducted a comprehensive profiling of the kinetics of potential furan biomarkers over time to capture the metabolic dynamics of furan in vivo. Most urinary furan metabolites reached peak concentrations at either the first (3 h) or second (6 h) sampling time point and were largely eliminated within 36 h following furan treatment. The present study provides novel insights into furan metabolism and sheds light on the biomonitoring of furan exposure.

Covalent inhibition of pro-apoptotic BAX.

BCL-2-associated X protein (BAX) is a promising therapeutic target for activating or restraining apoptosis in diseases of pathologic cell survival or cell death, respectively. In response to cellular stress, BAX transforms from a quiescent cytosolic monomer into a toxic oligomer that permeabilizes the mitochondria, releasing key apoptogenic factors. The mitochondrial lipid trans-2-hexadecenal (t-2-hex) sensitizes BAX activation by covalent derivatization of cysteine 126 (C126). In this study, we performed a disulfide tethering screen to discover C126-reactive molecules that modulate BAX activity. We identified covalent BAX inhibitor 1 (CBI1) as a compound that selectively derivatizes BAX at C126 and inhibits BAX activation by triggering ligands or point mutagenesis. Biochemical and structural analyses revealed that CBI1 can inhibit BAX by a dual mechanism of action: conformational constraint and competitive blockade of lipidation. These data inform a pharmacologic strategy for suppressing apoptosis in diseases of unwanted cell death by covalent targeting of BAX C126.

N-Terminal-Specific Dual Modification of Peptides through Copper-Catalyzed [3+2] Cycloaddition.

Site-specific introduction of multiple components into peptides is greatly needed for the preparation of densely functionalized and structurally uniform peptides. In this regard, N-terminal-specific peptide modification is attractive, but it can be difficult due to the presence of highly nucleophilic lysine ϵ-amine. In this work, we developed a method for the N-terminal-specific dual modification of peptides through a three-component [3+2] cycloaddition with aldehydes and maleimides under mild copper catalysis. This approach enables exclusive functionalization at the glycine N-terminus of iminopeptides, regardless of the presence of lysine ϵ-amine, thus affording the cycloadducts in excellent yields. Tolerating a broad range of functional groups and molecules, the present method provides the opportunity to rapidly construct doubly functionalized peptides using readily accessible aldehyde and maleimide modules.

A Simple Screening and Optimization Bioprocess for Long-Chain Peptide Catalysts Applied to Asymmetric Aldol Reaction.

Peptides have demonstrated their efficacy as catalysts in asymmetric aldol reactions. But the constraints inherent in chemical synthesis have imposed limitations on the viability of long-chain peptide catalysts. A noticeable dearth of tools has impeded the swift and effective screening of peptide catalysts using biological methods. To address this, we introduce a straightforward bioprocess for the screening of peptide catalysts for asymmetric aldol reactions. We synthesized several peptides through this method and obtained a 15-amino acid peptide. This peptide exhibited asymmetric aldol catalytic activity, achieving 77% ee in DMSO solvent and 63% ee with over an 80.8% yield in DMSO mixed with a pH 9.0 buffer solution. The successful application of our innovative approach not only represents an advancement but also paves the way for currently unexplored research avenues.

The number and position of unsaturated bonds in aliphatic aldehydes affect the cysteine-glucose Maillard reaction: Formation mechanism and comparison of volatile compounds.

Nonanal, (E)-2-nonenal, (E,E)-2,4-nonadienal, and (E,Z)-2,6-nonadienal were used to reveal the effect of the number and position of unsaturated bond in aliphatic aldehydes on Maillard reaction for the generation of 88 stewed meat-like volatile compounds. The results showed that (E,E)-2,4-nonadienal and (E,Z)-2,6-nonadienal exhibited greater inhibition of the cysteine reaction with glucose than nonanal and (E)-2-nonenal. However, the positions of the unsaturated bonds in aliphatic aldehydes in the Maillard reaction stage were similar. A carbohydrate module labeling approach was used to present the formation pathways of 34 volatile compounds derived from the Maillard reaction with aliphatic aldehyde systems. The number and position of unsaturated bonds in aliphatic aldehydes generate multiple pathways of flavor compound formation. 2-Propylfuran and (E)-2-(2-pentenyl)furan resulted from aliphatic aldehydes. 5-Butyldihydro-2(3H)-furanone and 2-methylthiophene were produced from the Maillard reaction. 2-Furanmethanol, 2-thiophenecarboxaldehyde, and 5-methyl-2-thiophenecarboxaldehyde were derived from the interaction of aliphatic aldehydes and the Maillard reaction. In Particular, the addition of aliphatic aldehydes changed the formation pathway of 2-propylthiophene, thieno[3,2-b]thiophene, and 2,5-thiophenedicarboxaldehyde. Heatmap and PLS-DA analysis could discriminate volatile compound compositions of the five systems and screen the marker compounds differentiating volatile compounds.

Evaluation of Linkers' Influence on Peptide-Based Piezoelectric Biosensors' Sensitivity to Aldehydes in the Gas Phase.

Recent findings qualified aldehydes as potential biomarkers for disease diagnosis. One of the possibilities is to use electrochemical biosensors in point-of-care (PoC), but these need further development to overcome some limitations. Currently, the primary goal is to enhance their metrological parameters in terms of sensitivity and selectivity. Previous findings indicate that peptide OBPP4 (KLLFDSLTDLKKKMSEC-NH2) is a promising candidate for further development of aldehyde-sensitive biosensors. To increase the affinity of a receptor layer to long-chain aldehydes, a structure stabilization of the peptide active site via the incorporation of different linkers was studied. Indeed, the incorporation of linkers improved sensitivity to and binding of aldehydes in comparison to that of the original peptide-based biosensor. The tendency to adopt disordered structures was diminished owing to the implementation of suitable linkers. Therefore, to improve the metrological characteristics of peptide-based piezoelectric biosensors, linkers were added at the C-terminus of OBPP4 peptide (KLLFDSLTDLKKKMSE-linker-C-NH2). Those linkers consist of proteinogenic amino acids from group one: glycine, L-proline, L-serine, and non proteinogenic amino acids from group two: ß-alanine, 4-aminobutyric acid, and 6-aminohexanoic acid. Linkers were evaluated with in silico studies, followed by experimental verification. All studied linkers enhanced the detection of aldehydes in the gas phase. The highest difference in frequency (60 Hz, nonanal) was observed between original peptide-based biosensors and ones based on peptides modified with the GSGSGS linker. It allowed evaluation of the limit of detection for nonanal at the level of 2 ppm, which is nine times lower than that of the original peptide. The highest sensitivity values were also obtained for the GSGSGS linker: 0.3312, 0.4281, and 0.4676 Hz/ppm for pentanal, octanal, and nonanal, respectively. An order of magnitude increase in sensitivity was observed for the six linkers used. Generally, the linker's rigidity and the number of amino acid residues are much more essential for biosensors' metrological characteristics than the amino acid sequence itself. It was found that the longer the linkers, the better the effect on docking efficiency.

Neutral and cationic nickel(II) complexes with substituted salicylaldehydes: Characterization, antibacterial activity, and interaction with biomacromolecules.

Four neutral and six cationic nickel(II) complexes of the substituted salicylaldehydes (X-diCl-saloH), namely 3,5-dichloro-salicylaldehyde (3,5-diCl-saloH) and 5-fluoro-salicylaldehyde (5-F-saloH), were synthesized in the absence or presence of the N,N'-donors 1,10-phenanthroline (phen), 2,9-dimethyl-1,10-phenanthroline (neoc), or 2,2'-bipyridylamine (bipyam) as co-ligands and were characterized by various techniques. The obtained complexes bear the general formulas [Ni(X-salo)2(H2O)2], [Ni(3,5-diCl-salo)2(neoc/phen)] and [Ni(X-salo)(N,N'-donor)2](PF6). The crystal structures of three complexes were determined by single-crystal X-ray crystallography revealing a bidentate coordination of the salicylaldehydes. The interaction of the compounds with calf-thymus DNA was studied by diverse techniques which revealed an intercalative interaction for the neutral complexes [Ni(X-salo)2(H2O)2] and [Ni(3,5-diCl-salo)2(neoc/phen)]and the co-existence of electrostatic interactions for the cationic complexes [Ni(X-salo)(N,N'-donor)2](PF6). The compounds bind tightly and reversibly to serum albumins. The antibacterial activity of the compounds was investigated against Staphylococcus aureus ATCC 6538, Bacillus subtilis ATCC 6633, Escherichia coli NCTC 29,212 and Xanthomonas campestris ATCC 1395 and the complexes bearing neoc as co-ligand proved the most potent.