Revealing the impact of modified modules flexibility on gemcitabine prodrug nanoassemblies for effective cancer therapy.

Prodrug nanoassemblies combine the advantages of prodrug strategies and nanotechnology have been widely utilized for delivering antitumor drugs. These prodrugs typically comprise active drug modules, response modules, and modification modules. Among them, the modification modules play a critical factor in improving the self-assembly ability of the parent drug. However, the impact of the specific structure of the modification modules on prodrug self-assembly remains elusive. In this study, two gemcitabine (GEM) prodrugs are developed using 2-octyl-1-dodecanol (OD) as flexible modification modules and cholesterol (CLS) as rigid modification modules. Interestingly, the differences in the chemical structure of modification modules significantly affect the assembly performance, drug release, cytotoxicity, tumor accumulation, and antitumor efficacy of prodrug nanoassemblies. It is noteworthy that the prodrug nanoassemblies constructed with flexible modifying chains (OD) exhibit improved stability, faster drug release, and enhanced antitumor effects. Our findings elucidate the significant impact of modification modules on the construction of prodrug nanoassemblies.

Functionalized Magnetic Fe3O4 Nanoparticles for Targeted Methotrexate Delivery in Ovarian Cancer Therapy.

Magnetic Fe3O4 nanoparticles (MNPs) functionalized with (3-aminopropylo)trietoksysilan (APTES) or N-carboxymethylchitosan (CMC) were proposed as nanocarriers of methotrexate (MTX) to target ovarian cancer cell lines. The successful functionalization of the obtained nanostructures was confirmed by FT-IR spectroscopy. The nanoparticles were characterized by transmission electron spectroscopy (TEM) and dynamic light scattering (DLS) techniques. Their potential zeta, magnetization, and hyperthermic properties were also explored. MTX was conjugated with the nanocarriers by ionic bonds or by amide bonds. The drug release kinetics were examined at different pH and temperatures. The MTT assay showed no toxicity of the MNPs[APTES] and MNPs[CMC]. Finally, the cytotoxicity of the nanostructures with MTX attached towards the ovarian cancer cells was measured. The sensitivity and resistance to methotrexate was determined in simplistic 2D and spheroid 3D conditions. The cytotoxicity tests of the tested nanostructures showed similar values for inhibiting the proliferation of ovarian cancer cells as methotrexate in its free form. Conjugating MTX with nanoparticles allows the drug to be directed to the target site using an external magnetic field, reducing overall toxicity. Combining this approach with hyperthermia could enhance the therapeutic effect in vivo compared to free MTX, though further research on advanced 3D models is needed.

Production of 5-fluorouracil-loaded PLGA nanoparticles with toroidal microfluidic system and optimization of process variables by design of experiments.

In recent decades, microfluidics has presented new opportunities for the production of nanoparticles (NPs). However, to achieve rapid clinical translation, the production of PLGA NPs in a single microfluidic channel for both the pharmaceutical research and industry without the need for scaling is still limited. The aim of this study was to accomplish the production of reproducible and stable 5-FU loaded Poly(lactic-co-glycolic acid) (PLGA) NPs, using an innovative toroidal microfluidic system, for cancer therapy. The toroidal microfluidic system enabled the production of spherical NPs ranging from 100 to 150 nm by adjusting both the TFR within the range of 5-15 mL/min and FRR between 1:3 and 1:7. A systematic assessment of critical process variables (total flow rate; TFR, flow rate ratio; FRR) for the production of PLGA NPs was conducted using Design of Experiment (DoE). The NPs, which exhibit a uniform size distribution, remained stable even after centrifugation and storage for 3 months at 4 °C. The encapsulation efficiency of drug and the concentration of NPs were not affected by changing process parameters. The effective 5-FU encapsulation into NPs resulted in a controlled in vitro drug release. Due to the controlled release profile of the 5-FU loaded PLGA NPs, the formulation was a promising candidate for mitigating the toxic side effects of free 5-FU and improving cancer treatment. In conclusion, toroidal microfluidic system enables high-volume production of stable PLGA NPs, both with and without 5-FU.

Delivery of 5-fluorouracil for cancer therapy using aptamer-based nonlinear hybridization chain reaction.

5-Fluorouracil (5-FU) is a conventional nucleotide analogue used for cancer treatment. However, its clinical application faces challenges such as low stability and non-specific toxicity. With the remarkable advancements in DNA nanotechnology, DNA-based self-assembled nanocarriers have emerged as powerful tools for delivering nucleotide drugs. In this study, we have designed a non-linear hybrid chain reaction involving a fuel strand with AS1411 aptamer sequence to construct a dendritic structure capable of carrying 5-FU. This structure specifically targets cancer cells with overexpressed nucleolin on their surface, allowing the 5-FU to exert its anticancer effects and achieve therapeutic outcomes. Furthermore, we have also investigated the mechanistic action of this drug delivery system, aiming to establish a novel therapeutic platform for 5-FU treatment.

Cancer cell membrane-modified Soluplus® micelles for gemcitabine delivery to pancreatic cancer using a prodrug approach.

Pancreatic cancer (PC) is one of the most lethal malignancies worldwide and its incidence is increasing. Chemotherapy is often associated to limited efficacy, poor targeting and systemic toxicity. In this work, the hydrophilic gemcitabine (GEM), widely used in PC treatment alone or in combination, was conjugated with vitamin E succinate (VES) and encapsulated in Soluplus® micelles. This prodrug approach facilitated encapsulation of the anticancer drug into the self-assembled copolymer micelles. Soluplus®/VES-GEM micelles were optimized regarding the ratio of the components and the preparation process. The micelles were small-sized (<80 nm), monodisperse, and highly stable, efficiently retaining the conjugate drug and showing significant antiproliferative activity against BxPC3 cell line. To improve biofunctionalization and targeting properties of prepared Soluplus®/VES-GEM micelles, biomimetic modification with PC cell membrane was further attempted by co-extruding PC cell membrane (BxPC3) nanovesicles with Soluplus®/VES-GEM micelles. Several protocols were attempted to prepare the BxPC3-modified Soluplus®/VES-GEM micelles and the outcomes were analyzed in detail. Overall, the results pave the way to innovative PC-targeted nanotherapies by maximizing GEM encapsulation in hydrophobic compartments with high stability and affinity. The results also highlight the need of higher resolution techniques to characterize cell membrane coating of nanocarriers bearing highly hydrophilic shells.

Encapsulation of Gemcitabine on Porphyrin Aluminum Metal-Organic Framework by Mechano-Chemistry, Delayed Drug Release and Cytotoxicity to Pancreatic Cancer PANC-1 Cells.

Gemcitabine is a widely used antimetabolite drug of pyrimidine structure, which can exist as a free-base molecular form (Gem). The encapsulated forms of medicinal drugs are of interest for delayed and local drug release. We utilized, for the first time, a novel approach of mechano-chemistry by liquid-assisted grinding (LAG) to encapsulate Gem on a "matrix" of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (compound 2). The chemical bonding of Gem to compound 2 was studied by ATR-FTIR spectroscopy and powder XRD. The interaction involves the C=O group of Gem molecules, which indicates the formation of the encapsulation complex in the obtained composite. Further, the delayed release of Gem from the composite was studied to phosphate buffered saline (PBS) at 37 °C using an automated drug dissolution apparatus equipped with an autosampler. The concentration of the released drug was determined by HPLC-UV analysis. The composite shows delayed release of Gem due to the bonded form and constant concentration thereafter, while pure Gem shows quick dissolution in less than 45 min. Delayed release of Gem drug from the composite follows the kinetic pseudo-first-order rate law. Further, for the first time, the mechanism of delayed release of Gem was assessed by the variable stirring speed of drug release media, and kinetic rate constant k was found to decrease when stirring speed is decreased (diffusion control). Finally, the prolonged time scale of toxicity of Gem to pancreatic cancer PANC-1 cells was studied by continuous measurements of proliferation (growth) for 6 days, using the xCELLigence real-time cell analyzer (RTCA), for the composite vs. pure drug, and their differences indicate delayed drug release. Aluminum metal-organic frameworks are new and promising materials for the encapsulation of gemcitabine and related small-molecule antimetabolites for controlled delayed drug release and potential use in drug-eluting implants.

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release.

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Design, optimization, and evaluation of methotrexate loaded and albumin coated polymeric nanoparticles.

Methotrexate is a potent anticancer drug whose strong efflux is facilitated by the brain's efflux transporter. As an efflux transporter blocker, albumin increased the drug's concentration in the brain. Methotrexate-loaded nanoparticles were produced by evaporating the emulsification fluid. Improvements and analyses were made to the following aspects of the generated nanoparticles: size, polydispersity, zeta potential, entrapment efficiency, percentage yield, scanning electron microscopy, in vitro drug release studies, and sterilization. The particle size was determined to be in the nano range, and homogeneity of particle size was suggested by a low polydispersity index result. Particle diameters of 168 nm were observed in the F5 preparation, and zeta potential values of -1.5 mV suggested that the preparation produced adequate repulsive interactions between the nanoparticles. Albumin and dopamine HCl were employed to coat the methotrexate-loaded nanoparticles to guarantee that the brain received an adequate amount of them. The homogeneity of albumin coated nanoparticles was demonstrated by the low% PDI values of 0.129 and 0.122 for albumin coated nanoparticles (MNPs-Alb) and polymerized dopamine HCl and albumin coated nanoparticles (MNPs-PMD-Alb), respectively. After 48 h of incubation, the cell viability measured at the same drug concentration (5 mg) decreased for the F5, albumin coated nanoparticles, polymerized dopamine HCl coated nanoparticles, and polymerized dopamine HCl and albumin coated nanoparticles, respectively. Our primary findings demonstrate that the albumin nanoparticles containing methotrexate are designed to deliver the drug gradually. With minimal cytotoxicity, the intended preparation might give the brain an appropriate dosage of methotrexate.

Chitosan-PLGA mucoadhesive nanoparticles for gemcitabine repurposing for glioblastoma therapy.

Glioblastoma (GBM) is a highly deadly brain tumor that does not respond satisfactorily to conventional treatment. The non-alkylating agent gemcitabine (GEM) has been proposed for treating GBM. It can overcome MGMT protein-mediated resistance, a major limitation of conventional therapy with the alkylating agent temozolomide (TMZ). However, GEM's high systemic toxicity and poor permeability across the blood-brain barrier (BBB) pose significant challenges for its delivery to the brain. Thus, mucoadhesive poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) coated with chitosan (CH), suitable for intranasal GEM delivery, were proposed in this work. A central composite design (CCD) was implemented for NPs optimization, and NPs with appropriate characteristics for intranasal administration were obtained. in vitro studies revealed that the NPs possess excellent mucoadhesive properties and the ability to selectively release GEM in the simulated tumor tissue environment. in vitro studies using two human GBM cell lines (U215 and T98G) revealed the NPs' ability to promote GEM's antiproliferative activity to sensitize cells to the effect of TMZ. The findings of this work demonstrate that the developed CH-GEM-NPs are suitable delivery systems for GEM, both as a single therapy and as a chemosensitizer to the GBM gold standard therapy.

Capecitabine loaded potato starch-chitosan nanoparticles: A novel approach for targeted therapy and improved outcomes in aggressive colon cancer.

Aggressive colon cancer treatment poses significant challenges. This study investigates the potential of innovative carbohydrate-based nanoparticles for targeted Capecitabine (CTB) delivery. CTB nanoparticles were synthesized by conjugating CTB with potato starch and chitosan using ultrasonication, hydrolysis, and ionotropic gelation. Characterization included drug loading, rheology, Surface-Enhanced Raman Spectroscopy (SERS), Fourier-Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), and Thermogravimetric Analysis (TGA). In vitro and in vivo antitumor activity was evaluated using HT-29 cells and N, N-dimethylhydrazine-induced Balb/c mice, respectively. Cellular assays assessed angiogenesis, migration, proliferation, and apoptosis. Nanoparticles exhibited a mean size of 245 nm, positive zeta potential (+30 mV), high loading efficacy (76 %), and sustained drug release (92 % over 100 h). CTB-loaded nanoparticles displayed superior colon histology, reduced tumour scores, and inhibited VEGD and CD31 expression compared to free CTB. Cellular assays confirmed significant antitumor effects, including reduced tube formation, migration, and proliferation, and increased apoptosis. This study demonstrates the promise of CTB-loaded potato starch-chitosan nanoparticles for aggressive colon cancer treatment. These findings highlight the potential of these nanoparticles for further evaluation in diverse cancer models.

Gemcitabine-Phospholipid Complex Loaded Lipid Nanoparticles for Improving Drug Loading, Stability, and Efficacy against Pancreatic Cancer.

This study aims to encapsulate gemcitabine (GEM) using a phospholipid complex (PLC) in lipid nanoparticles (NPs) to achieve several desirable outcomes, including high drug loading, uniform particle size, improved therapeutic efficacy, and reduced toxicities. The successful preparation of GEM-loaded lipid NPs (GEM-NPs) was accomplished using the emulsification-solidification method, following optimization through Box-Behnken design. The size of the GEM-NP was 138.5 ± 6.7 nm, with a low polydispersity index of 0.282 ± 0.078, as measured by a zetasizer and confirmed by transmission electron and atomic force microscopy. GEM-NPs demonstrated sustained release behavior, surpassing the performance of the free GEM and phospholipid complex. Moreover, GEM-NPs exhibited enhanced cytotoxicity, apoptosis, and cell uptake in Panc-2 and Mia PaCa cells compared to the free GEM. The in vivo pharmacokinetics revealed approximately 4-fold higher bioavailability of GEM-NPs in comparison with free GEM. Additionally, the pharmacodynamic evaluation conducted in a DMBA-induced pancreatic cancer model, involving histological examination, serum IL-6 level estimation, and expression of cleaved caspase-3, showed the potential of GEM-NPs in the management of pancreatic cancer. Consequently, the lipid NP-based approach developed in our investigation demonstrates high stability and uniformity and holds promise for enhancing the therapeutic outcomes of GEM.

Metal organic framework-based polymeric hydrogel: A promising drug delivery vehicle for the treatment of breast cancer.

The constraints associated with current cancer therapies have inspired scientists to develop advanced, precise, and safe drug delivery methods. These delivery systems boost treatment effectiveness, minimize harm to healthy cells, and combat cancer recurrence. To design advanced drug delivery vehicle with these character, in the present manuscript, we have designed a self-healing and injectable hybrid hydrogel through synergistically interacting metal organic framework, CuBTC with the poly(vinyl alcohol) (PVA). This hybrid hydrogel acts as a localized drug delivery system and was used to encapsulate and release the anticancer drug 5-Fluorouracil selectively at the targeted site in response to the physiological pH. The hydrogel was formed through transforming the gaussian coil like matrix of PVA-CuBTC into a three-dimensional network of hydrogel upon the addition of crosslinker; borax. The biocompatible character of the hydrogel was confirmed through cell viability test. The biocompatible hybrid hydrogel then was used to encapsulate and studied for the pH responsive release behavior of the anti-cancer drug, 5-FU. The in vitro cytotoxicity of the drug-loaded hydrogel was evaluated against MCF-7 and HeLa cells. The study confirms that the hybrid hydrogel is effective for targeted and sustained release of anticancer drugs at cancer sites.

Enhancing therapeutic efficacy: sustained delivery of 5-fluorouracil (5-FU) via thiolated chitosan nanoparticles targeting CD44 in triple-negative breast cancer.

Our current study reports the successful synthesis of thiolated chitosan-based nanoparticles for targeted drug delivery of 5-Fluorouracil. This process was achieved through the ionic gelation technique, aiming to improve the efficacy of the chemotherapeutic moiety by modifying the surface of the nanoparticles (NPs) with a ligand. We coated these NPs with hyaluronic acid (HA) to actively target the CD44 receptor, which is frequently overexpressed in various solid malignancies, including breast cancer. XRD, FTIR, SEM, and TEM were used for the physicochemical analysis of the NPs. These 5-Fluorouracil (5-FU) loaded NPs were evaluated on MDA-MB-231 (a triple-negative breast cell line) and MCF-10A (normal epithelial breast cells) to determine their in vitro efficacy. The developed 5-FU-loaded NPs exhibited a particle size within a favorable range (< 300 nm). The positive zeta potential of these nanoparticles facilitated their uptake by negatively charged cancer cells. Moreover, they demonstrated robust stability and achieved high encapsulation efficiency. These nanoparticles exhibited significant cytotoxicity compared to the crude drug (p < 0.05) and displayed a promising release pattern consistent with the basic diffusion model. These traits improve the pharmacokinetic profile, efficacy, and ability to precisely target these nanoparticles, offering a potentially successful anticancer treatment for breast cancer. However, additional in vivo assessments of these formulations are obligatory to confirm these findings.

Multifunctional Ionic Hydrogel-Based Transdermal Delivery of 5-Fluorouracil for the Breast Cancer Treatment.

Transdermal drug delivery systems (TDDS) are a promising and innovative approach for breast cancer treatment, offering advantages such as noninvasiveness, potential for localized and prolonged drug delivery while minimizing systemic side effects through avoiding first-pass metabolism. Utilizing the distinctive characteristics of hydrogels, such as their biocompatibility, versatility, and higher drug loading capabilities, in the present work, we prepared ionic hydrogels through synergistic interaction between ionic liquids (ILs), choline alanine ([Cho][Ala]), and choline proline ([Cho][Pro]) with oleic acid (OA). ILs used in the study are biocompatible and enhance the solubility of 5-fluorouracil (5-FU), whereas OA is a known chemical penetration enhancer. The concentration-dependent (OA) change in morphological aggregates, that is, from cylindrical micelles to worm-like micelles to hydrogels was formed with both ILs and was characterized by SANS measurement, whereas the interactions involved were confirmed by FTIR spectroscopy. The hydrogels have excellent mechanical properties, which studied by rheology and their morphology through FE-SEM analysis. The in vitro skin permeation study revealed that both hydrogels penetrated 255 times ([Cho][Ala]) and 250 times ([Cho][Pro]) more as compared to PBS after 48 h. Those ionic hydrogels exhibited the capability to change the lipid and keratin arrangements within the skin layer, thereby enhancing the transdermal permeation of the 5-FU. Both ionic hydrogels exhibit excellent biocompatibility with normal cell lines (L-132 cells) as well as cancerous cell lines (MCF-7 cells), demonstrating over 92% cell viability after 48 h in both cell lines. In vitro, the cytotoxicity of the 5-FU-loaded hydrogels was evaluated on MCF-7 and HeLa cell lines. These results indicate that the investigated biocompatible and nontoxic ionic hydrogels enable the transdermal delivery of hydrophilic drugs, making them a viable option for effectively treating breast cancer.

Oral Delivery of Photopolymerizable Nanogels Loaded with Gemcitabine for Pancreatic Cancer Therapy: Formulation Design, and in vitro and in vivo Evaluations.

Background: Gemcitabine (GEM) faces challenges of poor oral bioavailability and extensive first-pass metabolism. Currently, only injectable formulations are available for clinical use. Hence, there is an urgent demand for the development of advanced, efficacious, and user-friendly dosage forms to maintain its status as the primary treatment for pancreatic ductal adenocarcinoma (PDAC). Nanogels (NGs) offer a novel oral drug delivery system, ideal for hydrophilic compounds like GEM. This study aims to develop NGs tailored for GEM delivery, with the goal of enhancing cellular uptake and gastrointestinal permeability for improved administration in PDAC patients. Methods: We developed cross-linked NGs via photopolymerization of methacryloyl for drug delivery of GEM. We reveal characterization, cytotoxicity, and cellular uptake studies in Caco-2 and MIA PaCa-2 cells. In addition, studies of in vitro permeability and pharmacokinetics were carried out to evaluate the bioavailability of the drug. Results: Our results show NGs, formed via photopolymerization of methacryloyl, had a spherical shape with a size of 233.91±7.75 nm. Gemcitabine-loaded NGs (NGs-GEM) with 5% GelMA exhibited efficient drug loading (particle size: 244.07±19.52 nm). In vitro drug release from NGs-GEM was slower at pH 1.2 than pH 6.8. Cellular uptake studies indicated significantly enhanced uptake in both MIA PaCa-2 and Caco-2 cells. While there was no significant difference in GEM's AUC and Cmax between NGs-GEM and free-GEM groups, NGs-GEM showed markedly lower dFdU content (10.07 hr∙µg/mL) compared to oral free-GEM (19.04 hr∙µg/mL) after oral administration (p<0.01), highlighting NGs' efficacy in impeding rapid drug metabolism and enhancing retention. Conclusion: In summary, NGs enhance cellular uptake, inhibit rapid metabolic degradation of GEM, and prolong retention after oral administration. These findings suggest NGs-GEM as a promising candidate for clinical use in oral pancreatic cancer therapy.

Thermosensitive polymer prodrug nanoparticles prepared by an all-aqueous nanoprecipitation process and application to combination therapy.

Despite their great versatility and ease of functionalization, most polymer-based nanocarriers intended for use in drug delivery often face serious limitations that can prevent their clinical translation, such as uncontrolled drug release and off-target toxicity, which mainly originate from the burst release phenomenon. In addition, residual solvents from the formulation process can induce toxicity, alter the physico-chemical and biological properties and can strongly impair further pharmaceutical development. To address these issues, we report polymer prodrug nanoparticles, which are prepared without organic solvents via an all-aqueous formulation process, and provide sustained drug release. This was achieved by the "drug-initiated" synthesis of well-defined copolymer prodrugs exhibiting a lower critical solution temperature (LCST) and based on the anticancer drug gemcitabine (Gem). After screening for different structural parameters, prodrugs based on amphiphilic diblock copolymers were formulated into stable nanoparticles by all-aqueous nanoprecipitation, with rather narrow particle size distribution and average diameters in the 50-80 nm range. They exhibited sustained Gem release in human serum and acetate buffer, rapid cellular uptake and significant cytotoxicity on A549 and Mia PaCa-2 cancer cells. We also demonstrated the versatility of this approach by formulating Gem-based polymer prodrug nanoparticles loaded with doxorubicin (Dox) for combination therapy. The dual-drug nanoparticles exhibited sustained release of Gem in human serum and acidic release of Dox under accelerated pathophysiological conditions. Importantly, they also induced a synergistic effect on triple-negative breast cancer line MDA-MB-231, which is a relevant cell line to this combination.

Novel insights into the role of translesion synthesis polymerase in DNA incorporation and bypass of 5-fluorouracil in colorectal cancer.

5-Fluorouracil (5-FU) is the first-line chemotherapeutic agent in colorectal cancer, and resistance to 5-FU easily emerges. One of the mechanisms of drug action and resistance of 5-FU is through DNA incorporation. Our quantitative reverse-transcription PCR data showed that one of the translesion synthesis (TLS) DNA polymerases, DNA polymerase η (polη), was upregulated within 72 h upon 5-FU administration at 1 and 10 µM, indicating that polη is one of the first responding polymerases, and the only TLS polymerase, upon the 5-FU treatment to incorporate 5-FU into DNA. Our kinetic studies revealed that 5-fluoro-2'-deoxyuridine triphosphate (5FdUTP) was incorporated across dA 41 and 28 times more efficiently than across dG and across inosine, respectively, by polη indicating that the mutagenicity of 5-FU incorporation is higher in the presence of inosine and that DNA lesions could lead to more mutagenic incorporation of 5-FU. Our polη crystal structures complexed with DNA and 5FdUTP revealed that dA:5FdUTP base pair is like dA:dTTP in the active site of polη, while 5FdUTP adopted 4-enol tautomer in the base pairs with dG and HX increasing the insertion efficiency compared to dG:dTTP for the incorrect insertions. These studies confirm that polη engages in the DNA incorporation and bypass of 5-FU.

Preparation of PMMA-Based Temperature/pH Responsive Nanoparticles Encapsulating 5-Fluorouracil and Methotrexate In Situ by One-Pot Dispersion Photopolymerization.

In order to achieve long-term and controllable release of anti-tumor drugs at specific sites, temperature/pH responsive nanoparticles encapsulating 5-fluorouracil and methotrexate in situ are prepared through dispersion photopolymerization under green LED irradiation. The physicochemical properties of nanoparticles are characterized by scanning electron microscopy, Fourier transform infrared, dynamic light scattering, thermogravimetric/differential scanning calorimetry, and X-ray diffraction. In vitro drug release at different temperatures and pH values is examined to ascertain the release pattern of two drugs, which can be well described by Korsmeyer-Peppas kinetic model. The cytotoxicity evaluation illustrates that the tumor cells could be more effectively killed by the drug-loaded nanoparticles, and the improved therapeutic effect is attributed to the controllable and sustainable drug release as well as the enhanced cellular uptake. The blood safety and good biocompatibility of nanoparticles are further confirmed by hemolysis assay, indicating the prepared nanoparticles are potential candidates for effective tumor treatment.

LogP of N-acyl-gemcitabine and lectin-corona emerge as key parameters in nanoparticulate intravesical cancer therapy.

After surgical removal of the tumour tissue, bladder cancer is treated by intravesical instillation of cytotoxic drugs such as gemcitabine. Gemcitabine, however, is highly hydrophilic and possesses a short half-life due to fast enzymatic deamination. Additionally, continuous dilution by urine, a hardly permeable urothelial barrier and rapid excretion by urination make therapy difficult. To modify lipophilicity of the drug, N-acyl-gemcitabine derivatives with quite different solubility and logP were synthesized, purified and characterized. The loading of PLGA nanoparticles with the N-acyl-gemcitabine derivatives followed by release in artificial urine, revealed that the drug content increases but the subsequent release decreases with lipophilicity. Additionally, acylation increased cytotoxicity and opened passive diffusion as an additional pathway into cancer cells. To address physiological constraints, the surface of the monodisperse nanoparticles was grafted with bioadhesive wheat germ agglutinin. Cytoadhesion to artificial bladder cancer tissue and even uptake into the cells as indicated by microscopic imaging are expected to prolong the retention time in the bladder cavity as well as to promote uptake into the cells. By using N-caprylic-gemcitabine as most appropriate gemcitabine-derivative for drug loading and making use of the bioadhesive characteristics of wheat germ agglutinin for grafting the corona of PLGA-nanoparticles, an innovative strategy towards smart drug delivery for instillative therapy of bladder cancer is proposed.

CDX2 controls genes involved in the metabolism of 5-fluorouracil and is associated with reduced efficacy of chemotherapy in colorectal cancer.

Most patients affected with colorectal cancers (CRC) are treated with 5-fluorouracil (5-FU)-based chemotherapy but its efficacy is often hampered by resistance mechanisms linked to tumor heterogeneity. A better understanding of the molecular determinants involved in chemoresistance is critical for precision medicine and therapeutic progress. Caudal type homeobox 2 (CDX2) is a master regulator of intestinal identity and acts as tumor suppressor in the colon. Here, using a translational approach, we examined the role of CDX2 in CRC chemoresistance. Unexpectedly, we discovered that the prognosis value of CDX2 for disease-free survival of patients affected with CRC is lost upon chemotherapy and that CDX2 expression enhances resistance of colon cancer cells towards 5-FU. At the molecular level, we found that CDX2 expression correlates with higher levels of genes regulating the bioavailability of 5-FU through efflux (ABCC11) and catabolism (DPYD) in patients affected with CRC and CRC cell lines. We further showed that CDX2 directly regulates the expression of ABCC11 and that the inhibition of ABCC11 improves 5-FU-sensitivity of CDX2-expressing colon cancer cells. Thus, this study illustrates how biological functions are hijacked in CRC cells and reveals the therapeutic interest of CDX2/ABCC11/DPYD to improve systemic chemotherapy in CRC.