Prosthetic rehabilitation of patients with maxillary oncology defects using zygomatic implants.

PURPOSE: Prosthetics for patients after oncological resection of the upper jaw is a complex problem associated with the physiological and anatomical separation of the oral cavity and the nasal/paranasal region. This study reports the clinical results of the use of the zygomatic implants for prosthetic rehabilitation in patients with maxillectomy due to upper jaw tumors. MATERIALS AND METHODS: The study included 16 patients who underwent prosthetic rehabilitation using a zygomatic implant after maxillectomy period from 2021 to 2023. After the tumor was removed, immediate surgical obturators were placed. Main prosthetic rehabilitation was performed 6-12 months after tumor removal, but before that, a temporary obturator was made and used. Six-twelve months after tumor resection, 1-4 zygomatic implants were inserted into the zygomatic bone unilaterally or bilaterally. A total of 42 zygomatic implants were installed, 2 of which were unsuccessful and were removed in 1 patient. The implants were placed using the surgical guide, which was planned and prepared digitally. RESULTS: No postsurgical complications were seen, and the patients were discharged from the hospital after 7-10 days. The patients were able to return to a normal diet (hard food) after just 7 days following surgery, with no further complaints regarding function or pain, apart from the residual edema caused by the intervention. CONCLUSIONS: The use of prostheses fixed on zygomatic implants in patients with maxillary defects is an effective method of prosthodontic rehabilitation in complex clinical cases after maxillectomy.

The 'Manchester' method of minimal access fixation of the zygomatic arch in zygomatic complex fractures: a case series.

We have introduced a minimally invasive approach for the fixation of the zygomatic arch during the surgical management of zygomatic complex fractures. Access for this technique is provided by a preauricular approach and eyelid incisions with the addition of transcutaneous stab incisions overlying the arch. These stab incisions allow transcutaneous drilling and screw placement through a size CH 20 (5.0 mm) paediatric nasopharyngeal airway (NPA). We present a case series of seven patients. In all patients the arch component was successfully reduced and fixed, and no intraoperative or postoperative complications were observed. The use of an NPA is novel. It functions as a flexible self-irrigating sleeve and protects the skin from mechanical and thermal damage. The technique uses readily available equipment, is easy to learn, and simplifies surgery to the zygomatic arch.

Learning curve of dynamic navigation-assisted zygomatic implant surgery: An in vitro study.

STATEMENT OF PROBLEM: Dynamic computer-assisted zygomatic implant surgery (dCAZIS) has been reported to provide clinical efficacy with high accuracy and low risk of complications. However, the learning curve before performing dCAZIS effectively is unknown. PURPOSE: The purpose of this in vitro study was to explore the learning curve of dCAZIS in dentists with different levels of experience in implant dentistry and navigation surgery. MATERIAL AND METHODS: Six senior dental students were randomly divided into 3 groups for initial training (FH-CI group: pretraining on freehand conventional implant surgery; FH-ZI group: pretraining on freehand ZI surgery; DN-CI group: pretraining on conventional implant surgery under dynamic navigation). Then, every operator conducted 6 repeated dCAZIS training sessions on edentulous 3-dimensional (3D) printed skull models and was asked to complete a self-report questionnaire after each training session. A total of 36 postoperative cone beam computed tomography (CBCT) scans with 144 ZI osteotomy site preparations were obtained and superimposed over the preoperative design for accuracy measurements. The operation time, 3D deviations, and results of the self-reports were recorded. Comparisons among groups were analyzed with independent-sample Kruskal-Wallis tests (α=.05), and correlations between study outcomes and the number of practices were calculated. RESULTS: Operator experience and increased practice times did not significantly affect the accuracy of dCAZIS (P>.05). However, the operation time varied among groups (P<.001), and significantly shortened with more practice, reaching 11.51 ±1.68 minutes at the fifth attempt in the FH-CI group (P<.001 compared with the first practice), 14.48 ±3.07 minutes at the third attempt in the FH-ZI group (P=.038), and 8.68 ±0.58 minutes at the sixth attempt in the DN-CI group (P<.001). All groups reached their own learning curve plateau stage within 6 practice sessions. As the number of practice sessions increased, the results from the self-report questionnaires gradually improved. CONCLUSIONS: Among dentists with different levels of experience in implant dentistry and navigation surgery, dCAZIS was found to have a learning curve with respect to operation time but not implant accuracy. Experience in ZI surgery had little impact on the learning curve of dCAZIS, but experience in navigation surgery was a key factor.

Modeling stability post zygomatic fracture reconstruction.

Zygomaticomaxillary complex (ZMC) fracture repair is one of the most common surgical procedures performed in craniomaxillofacial trauma management. Miniplates and screws are used to stabilize the fractured bone using small local incisions, however, these procedures are not infrequently associated with hardware-related post-operative complications. The amount of fixation hardware utilized varies depending on the fracture pattern and surgical judgment, with three-point fixation being the conventionally accepted treatment. However, limited experimental testing and clinical studies have suggested that ZMC stabilization may be achieved with less than three-point fixation. In this study, we utilized a previously developed finite element modeling approach that allows for detailed bone and muscle representation to study the mechanical behavior of the fractured craniomaxillofacial skeleton (CMFS) under one, two, or three-point fixation of the ZMC. Results suggest that using a miniplate along the infraorbital rim in three-point fixation increases the amount of strain and load transfer to this region, rather than offloading the bone. Two-point (zygomaticomaxillary and zygomaticofrontal) fixation yielded strain patterns most similar to the intact CMFS. One-point (zygomaticofrontal) fixation resulted in higher tensile and compressive strains in the zygomaticofrontal region and the zygomatic arch, along with a higher tensile strain on the zygomatic body. These modeling results provide biomechanical evidence for the concept of over-engineering in the stabilization of facial fractures. Furthermore, they support previous suggestions that less than three-point fixation of ZMC fractures may be adequate to achieve uneventful healing.

Guided placement of zygomatic implants in head and neck cancer patients: implant survival and patient outcomes at 1-3 years of follow-up.

Zygomatic implants (ZI) are a valuable option for supporting an obturator prosthesis after maxillary resection. This study was performed to assess the clinical outcomes of a digitally validated guided technique for ZI placement, followed by immediate prosthetic obturation. The primary objective was to evaluate implant survival, while the secondary objective was to assess patient-reported quality of life post-rehabilitation. Twelve patients treated for head and neck cancer received a total of 36 ZI after ablative surgery. The mean duration of ZI follow-up was 30.1 months. The survival rate of ZI placed in non-irradiated patients was 100%, while it was 85% in irradiated patients. Patient-reported outcomes were evaluated using the Liverpool Oral Rehabilitation Questionnaire (LORQv3) and the University of Washington Quality of Life Questionnaire (UW-QOL v4). Most patients reported satisfactory outcomes in the oral function domain of the LORQv3 (mean score 17.7 ± 4.5; possible range 12-48, with lower scores indicating better outcomes). Regarding the UW-QOL v4, the swallowing and chewing domains had the highest scores (mean 97.5 ± 8.7 and 95.8 ± 14.4, respectively; maximum possible score of 100). In conclusion, this treatment approach improves function and quality of life after maxillary ablative surgery. However, irradiated patients showed a noticeable trend of higher implant failure, and this was influenced by tumour position and size impacting the radiation dose to the zygomatic bone.

Rotation of a Part of the Composite Flap for Simultaneous Gonion Reduction and Malar Augmentation During Rhytidectomy in Asians.

BACKGROUND: The desired facial shape that Asians aim to achieve through plastic surgery differs from that of westerners. OBJECTIVES: The author facilitates facial volume deflation by using the rotation of a part of the composite flap to the malar area resulting in volumetric augmentation during rhytidectomy; simultaneously, a volumetric reduction was implemented in the gonion. METHODS: Extended deep plane rhytidectomy with the rotation of a part of the composite flap was performed in 49 patients, whereas extended deep plane rhytidectomy without the rotation of a part of the composite flap was performed in 20 patients. For the results, the satisfaction survey of the surgery was conducted in all patients and by 2 surgeons during a follow-up visit 12 months later. To assess the surgical outcome objectively, the author used the Allergan photometric midface volume deficit scale to measure the midface volume. The midface contour and degree of projection were analyzed using lateral view photographs of the patients. The measurement of segment CM (distance between the lateral canthus and mouth corner) and segment MA (distance from segment CM to the most protruding malar area) was performed. RESULTS: The patients who underwent extended deep plane rhytidectomy with the rotation of a part of the composite flap reported higher overall satisfaction and achieved more favorable results, as evaluated by the 2 aesthetic surgeons (P < 0.05). The scores on the Allergan photometric midface volume deficit scale showed a significant increase before and after the surgery in both groups (P < 0.05), also as evaluated by the 2 aesthetic surgeons. However, the change in scores was found to be higher in the extended deep plane rhytidectomy with the rotation of a part of the composite flap group. The midface contour and degree of projection showed an increase of 20.6% on the right face and 22.7% on the left face, respectively (P < 0.001). CONCLUSION: Using the rotation of a part of the composite flap during rhytidectomy resulted in overall satisfactory outcomes for all patients. Based on these findings, it can be concluded that the use of this surgical method is beneficial and effective.

Three-dimensional Measurement of the Zygomatic-maxillary Complex in the Class III Malocclusion Patients with Maxillary Retrusion.

This study investigated the anatomic features of the zygomatic-maxillary complex in patients with maxillary retrusion without clefts. Individuals were grouped, and craniofacial measurements were performed for 21 individuals with skeletal Class III malocclusion with maxillary retrusion (CIII) and 48 individuals from the control group (CG). We evaluated the predetermined hard-tissue and soft-tissue points of the facial profile in each group. Independent sample t -tests were performed to determine the differences between groups (significance set at P <0.05). Multiple points on the midface, including the most posterior point on the contour of the maxillary alveolar process, lowest point of the zygomaticomaxillary suture, furthest point to the zygomatic self-base plane, superior point in the infraorbital foramen, and lowest point of the inferior margin of the orbit to the coronal plane were smaller in CIII than in CG (all P <0.05). The soft tissue thickness in these regions was significantly increased compared with that in the normal group. In summary, for class III malocclusion patients with maxillary retrusion, the deficiency in the midface gradually decreased going upward, with the deficiency at the maxillary alveolar level being the most serious. To some extent, soft tissues compensate for the deficiencies in the facial skeleton, and standard Le Fort I osteotomy advancement was sufficient to achieve a harmonious appearance.

The Spatial Relationship Between Coronoid Process and Zygomatic Complex After Reduction Malarplasty.

BACKGROUND: Reduction malarplasty presents challenges in terms of postoperative complications, particularly limited mouth opening. Excessive inward displacement of the zygomatic complex can impinge on the coronoid process resulting in restricted mouth opening. This study aimed to assess the spatial relationship between the coronoid process and the zygomatic complex after reduction malarplasty. METHODS: A retrospective study was conducted, including consecutive patients underwent reduction malarplasty. Radiological measurements were performed before surgery and during the final follow-up, including the coronoid-condylar index, distance between the coronoid process and zygomatic complex, and thickness and density of the temporal and masseter muscles. Clinical and radiographic data were recorded and analyzed. RESULTS: A total of 159 female patients were included with an average age of 28.1 years and a mean follow-up of 6.7 months. The mean coronoid-condylar index was 1:1.4, ranging from 1:0.6 to 1:2.6. Following surgery, the distances between the coronoid process and the anterior zygoma decreased by approximately 1 mm. Additionally, the postoperative distance between the highest point of the coronoid process and the zygomatic arch decreased by around 4 mm horizontally and changed approximately 1 mm vertically. No significant changes were observed in the thickness and density of the temporal and masseter muscles after surgery. CONCLUSIONS: Reduction malarplasty led to a slight decrease in the distance between the coronoid process and the zygoma. The operation generally resulted in proximity between the highest point of the coronoid process and the zygomatic arch. However, we believe that common reduction malarplasty rarely leads to osseous impingement. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

The accuracy of virtual surgical planning assisted management for L-shaped reduction malarplasty: A retrospective study.

This study aims to evaluate the accuracy of L-shaped reduction malarplasty with bone setback or resection on the zygoma and the mortice and tenon joint structure on the zygomatic arch under the guidance of virtual surgical planning (VSP). Adult patients with zygomatic protrusion or hypertrophy were enrolled and divided. L-shaped reduction malarplasty with or without bone resection and with the mortice and tenon joint structure on the zygomatic arch was conducted either by digital procedures comprising VSP and three-dimensional (3D) printing titanium templates (Group I) or by conventional methods (Group II). Positions of representative landmarks and superimposition models were analyzed by 3D cephalometry. Satisfaction rate and incidences of clinical complications were compared as well. Satisfactory reduction of zygomatic protrusion or hypertrophy was recognized among all 78 patients. Improved symmetry and great surgical accuracy were observed according to the cephalometry analyses. The bone segment movement of virtual plans and actual results in Group I were measured and showed no obvious difference for the inward movement (5.42 ± 0.98 mm vs. 5.33± 0.93 mm, P = 0.6906) and the sagittal overlap (4.77 ± 1.32 mm vs. 4.87± 1.21 mm, P = 0.7386) at the zygoma roots, along with the step length at the long-arm of the L-shaped osteotomy line (2.43 ± 1.11 mm vs. 2.39± 0.89 mm, P = 0.8665). The high resemblance between virtual plans and actual results was depicted via superimposition models. Meanwhile, a higher satisfaction rate (28 in 36, 78% vs. 20 in 42, 48%) and a lower incidence rate of complications (11 in 36, 31% vs. 21 in 42, 50%) were found in Group I. Within the limitations of the study it seems that the application of VSP in reduction malarplasty could significantly contribute to better surgical accuracy and reduced difficulties in the operation, which would be beneficial to patients with zygoma hypertrophy or prominence.

Combining Patient-specific Implant With Malar Reduction to Repair Mid-facial Asymmetry Caused by Craniofacial Fractures in Asians.

Mid-facial asymmetry caused by bone defect or deformation resulted from craniofacial fracture was a common secondary complication needed to repair. Patient-specific implant (PSI) designed with the unaffected side as a template is a good choice to repair this kind of facial asymmetry. However, in Asians, the broad and prominent zygomatic bone in unaffected side is not an optimal template, because the oval facial shape was considered as a more attractive appearance in Asian esthetic concept. To repair the mid-facial asymmetry and to improve the facial contour, the authors combined PSI implantation with malar reduction in one-stage surgery. The authors referred the facial proportion index (the optimal ratio of mid and lower face was 1.27) as a basis for preoperative precise design to determine the ideal facial shape of unaffected side, and used mirror image overlay technique with the ideal shape of unaffected side as a template to design the PSI. With this surgical strategy, patients not only can repair facial asymmetry but also can get a more attractive appearance.

Peri-zygomatic complications on zygomatic implants with or without penetrating the external surface of zygoma: A 2-year retrospective study.

OBJECTIVES: The main purpose of this retrospective study was to assess the difference in the incidence of peri-zygomatic complications (PZCs) when zygomatic implants (ZIs) penetrate or do not penetrate the external surface of zygoma. MATERIALS AND METHODS: This study included 32 patients with edentulous maxillae or potentially edentulous maxillae undergo zygomatic implantation. The patients were divided into the penetration group (P-group) and the non-penetration group (N-group) according to whether the apex of implants penetrated the external surface of zygoma in postoperative CBCT. The extension length, the penetration section of the implants, and the skin thickness at the corresponding position were simultaneously measured. Clinical follow-up was conducted regularly until 2 years after surgery. The occurrence of PZCs (including peri-zygomatic infection, skin numbness, non-infectious pain, and foreign body sensation) was recorded. A mixed effect logistic model was used to compare the difference of complication rate between the P-group and the N-group, and odds ratio (OR) was calculated. Then identify the impact of the extension length, penetration section and skin thickness in P-group with the same model. RESULTS: A total of 71 ZIs were implanted in 32 patients, including 37 implants in the P-group and 34 implants in the N-group. During the 2-year follow-up, a total of 13 implants occurred PZCs, with an overall complication rate of 18.3%. Thereinto, the incidence rate was 29.7% in the P-group, and 5.9% in the N-group (OR = 6.77). In P-group, there was a significant difference in complication rate of different extension lengths, while the penetration section and skin thickness had no statistical significance on the complication rate. CONCLUSION: Under the limitation of this study, to minimize the risk of PZCs, ZI should be placed in a manner that avoids the apex penetrating the external surface of the zygoma.

Novel Clinical Anatomical Consideration of the Superficial and Deep Layers of the Deep Temporal Fascia.

BACKGROUND: The deep temporal fascia provides anchoring during thread lifting, which is a minimally invasive face-lifting procedure. However, anatomical studies involving the deep temporal fascia in addition to effective and safe thread-lifting procedures are scarce. The authors clarified the anatomy of the superficial layer of the deep temporal fascia and its surrounding structure using ultrasonography, histologic sections, and cadaveric dissection to propose an effective thread-lifting procedure guideline. METHODS: The authors included 20 healthy young participants from the Republic of Korea. Real-time, two-dimensional, B-mode ultrasonography was performed. Longitudinal scanning was performed along three vertical lines: the line passing through the jugale, the anterior margin of the condylar process of the mandible, and the midpoint between the jugale and anterior margin of the condylar process. Histologic samples from three fresh adult cadavers were harvested from 2.5 cm above and below the zygomatic arch. Eighteen fresh adult hemifaces of cadavers from the Republic of Korea (six men and three women, aged 67.3 ± 7.2 years) were used to confirm the morphology of the deep temporal fascia. RESULTS: The superficial layer of the deep temporal fascia crossed the zygomatic arch and was connected to the origin of the zygomaticus major muscle at the line passing through the jugale. The superficial layer continued inferiorly to the parotidomasseteric fascia at the line passing through the midpoint and condylar process of the mandible. CONCLUSION: This study yielded the novel anatomy of the superficial layer of the deep temporal fascia, and this anatomical structure may be used for an ideal thread-lifting procedure.

Anti-sagging Method in Reduction Malarplasty: Application of the Bracing System with the Preservation of the Zygomaticus Major Muscle Bony Attachment.

BACKGROUND: Cheek drooping after reduction malarplasty remains a concern for patients. OBJECTIVES: To evaluate the anti-drooping effectiveness of the bracing system technique with the preservation of the zygomaticus major muscle (ZMj) bony attachment and to determine the role of ZMj in anti-drooping. METHODS: A retrospective analysis was conducted of patients who accepted this method in our department from February 2016 to May 2021. Patients' subjective evaluation and two plastic surgeons' objective assessment of photographs were performed. The pre- and postoperative three-dimensional (3D) ZMj models were reconstructed and compared. ZMj length and tortuosity were also measured from 3D models. RESULTS: Twenty-two patients (44 ZMjs) met the inclusion criteria. Most patients (21/22, 95.45%) were satisfied with the postoperative appearance without ageing after reduction malarplasty, except for one feeling slightly older after the operation. The objective scoring results showed no deepening of the nasolabial fold in the majority (20/22, 90.91%) of patients. Two patients were one-grade worse, from score 1 to 2. Upward movement of the postoperative ZMj bony attachment was clearly observed compared with the preoperative 3D model. The significantly reduced ZMj tortuosity (p < 0.001) and the slightly increased ZMj length (not significant) after surgery supported the straightening of the ZMj which was also seen in the 3D comparison. CONCLUSIONS: The bracing system technique with preservation of the bony attachment of the ZMj is an effective and cost-effective anti-sagging method for reduction malarplasty. The ZMj was lifted and straightened after reduction malarplasty, which helped to prevent sagging. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Successful Reduction of Unilateral Zygoma Fracture Following Bilateral Malar Reduction Surgery.

Malar reduction surgery can increase its susceptibility to fractures in case of trauma. Patients who had malar reduction surgery and sustained a zygoma fracture pose unique challenges for treatment and management. This is a case of a 28-year-old female patient who presented with a unilateral zygoma fracture following bilateral malar reduction and augmentation rhinoplasty 6 years ago. Physical examination revealed a clicking sound when opening the mouth at the right zygomatic buttress and a depressed preauricular area, suggesting arch fracture. Computed tomography imaging demonstrated a loosened screw at the right zygomatic buttress and a depressed arch fracture. She wanted to remove all plates and treat her right fractured zygoma with absorbable materials. Through the bilateral intraoral incisions, the authors removed the plates and screws and reduced the depression with the Langenbeck elevator through the same right intraoral incision without fixation. The reduction was well-maintained without complications based on postoperative plain x-rays 1 month after surgery. She reported that the pain was mostly gone and that she did not hear any abnormal sounds when opening her mouth after the surgery. In this case, if the zygomaticomaxillary buttress is minimally displaced, but the zygomatic arch fracture is significantly depressed, the authors believe that fracture reduction with only an intraoral incision would be enough to achieve an optimal outcome. If the plates and screws used in the previous malar reduction are not well maintained, it may be necessary to remove them.

Volume Redistribution of the Buccal Fat Pad After Reduction Malarplasty.

BACKGROUND: During reduction malarplasty, cheek bulging could be found immediately after zygomatic complex is moved inwards, backwards and upwards. As patient is in the supine position during surgery, the effect of gravity is eliminated, so the only reason for the bulge is the redistribution of the soft tissue in the deep facial spaces. The buccal fat pad, with its main body behind the zygomatic arch and buccal extension in the cheek area, is most likely to be responsible for the bulge. METHODS: 3D buccal extension models were reconstructed from preoperative and long-term follow-up CT images and the volume measured. By comparing the pre- and postoperative 3D models, the shape deviation of the buccal extension and facial soft tissue can be identified. RESULTS: Eleven patients (22 buccal extensions) met the inclusion criteria. Compared with the preoperative buccal extension volume, the postoperative volume increased significantly. By comparing the reconstructed models, the buccal extension volume increase with anteroinferior protrusion can be visually detected, and cheek bulging was clearly identified on the lower face. The bulging area coincided with the projection of the buccal extension on the skin surface. CONCLUSIONS: Reduction malarplasty may cause volume redistribution of the buccal fat pad. Therefore, preoperative assessment of the size of the buccal fat pad based on CT images is recommended. The buccal extension volume increase with anteroinferior protrusion is an important cause of postoperative cheek bulging and should be considered during treatment. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Surgical and health related quality of life outcomes following treatment with zygomatic implant perforated (ZIP) flaps.

BACKGROUND: The zygomatic implant perforated (ZIP) flap is a novel approach to the challenge of reconstructing the maxilla. We report on our experience using the ZIP flap technique for patients undergoing infrastructure maxillectomy at Chris O'Brien Lifehouse, Sydney, Australia. METHODS: Thirteen patients who underwent a ZIP flap reconstruction between August 2019 and August 2021 were identified. Demographic, surgical, and histopathological information was collected. Health Related Quality of Life (HRQOL) was assessed using the FACE-Q Head and Neck Cancer module, the M.D. Anderson Dysphagia Inventory, and the Speech Handicap Index. RESULTS: A total of 44 zygomatic implants were placed, of which 42 (95%) survived. The median time from surgery to dental rehabilitation was 35 days. HRQOL data was available for nine patients over 24 months, demonstrating improved speech and swallowing outcomes over the follow up period. CONCLUSIONS: The ZIP flap is a reproducible surgical technique that facilitates rapid dental rehabilitation post infrastructure maxillectomy.

The Value of Intraoperative Computed Tomography in the Treatment of Zygomatic Complex Fractures.

BACKGROUND: Due to the complex anatomical morphology and lack of anatomic markers on the surface of zygomatic complex (ZMC), the treatment results of ZMC fractures are often suboptimal. PURPOSE: The study aimed to evaluate the effectiveness of intraoperative computed tomography (ICT) in the treatment of unilateral ZMC fractures, and further study the feasibility of ICT to replace early postoperative Computed Tomography (CT). STUDY DESIGN, SETTING, AND SAMPLE: The investigators designed a retrospective cohort study. Adult patients who underwent surgery with unilateral ZMC fractures were enrolled. PREDICTOR VARIABLE: According to whether intraoperative CT was used, the subjects were divided into the ICT group and the control group (without ICT). MAIN OUTCOME VARIABLES: Five distances and 3 angles representing bilateral ZMC symmetry were main outcome variables. The differences of outcome variables were compared between the 2 groups and the indices of ICT group were further compared with their postoperative indices. COVARIATES: Demographics (eg age), etiology (eg traffic injury), dysfunction (eg diplopia), and surgical approach (eg vestibular incision) were collected as covariates while we conducted clinical investigation, examination, and implementation. ANALYSES: The data were analyzed using independent-samples t test, paired-samples t test, Mann-Whitney U test, and χ2 test. P value < .05 was considered statistically significant. RESULTS: A total of 60 patients (18 to 59 years) were enrolled in this study. All median values of the measurements in the ICT group were smaller than those in the control group, and the differences of horizontal displacement distance (0.56 vs 1.02 mm), anteroposterior displacement distance (1.69 vs 2.34 mm, 0.90 vs 2.35 mm), horizontal angle of bilateral zygomatic arch (2.31 vs 4.19°), and horizontal angle of bilateral zygomatic process (1.77 vs 2.94°) were significantly different between the 2 groups with P value < .05. Moreover, there was no statistically significant difference in all indices between the intraoperatively and postoperatively injured sides in the ICT group. CONCLUSIONS: ICT can improve the treatment outcomes of ZMC fractures by evaluating the fracture reduction adequacy during surgery. Moreover, ICT can replace early postoperative CT.