Experimental Modeling of Cranial Injury and Defect Reconstruction Using Superconstructive Polymers (PEEK).

Experimental model of resection craniotomy with subsequent reconstruction of the defect with a polymer implant enables comprehensive assessment of functional and ultrastructural changes during replacement of the damaged tissue. Reconstruction of a skull defect was accompanied by transient motor disturbance in the acute period and did not cause functional disorders and neurological deficits in a delayed period. Histological examination of osteal and brain tissue revealed no pathological reactions that could be associated with the response to the chemical components of the implant.

Cranioplasty in Oman: Retrospective review of cases from the National Craniofacial Center 2012-2022.

Objectives: Cranioplasty is a complex craniofacial and neurosurgical procedure that aims to reinstate the architecture of the cranial vault and elevate both its aesthetic and neurological function. Several reconstructive materials have been thoroughly explored in the search for the optimal solution for cranioplasty. This study aimed to evaluate different material used for cranial reconstruction in Oman. Methods: This retrospective study included all patients who had had cranioplasty procedures performed at Khoula Hospital, Muscat, Oman, from 2012 to 2022. Demographic information, the characteristics of the cranial defect and any complications that occurred post-operatively were analysed. Results: A total of 47 patients were included in this study. The most common cause of cranial defects was craniectomy following traumatic head injury (70.2%) along with excision of fibrous dysplasia (10.6%). The most frequently utilised material for cranial repair was autologous bone grafts (n = 28), followed by polyetheretherketone (PEEK; n = 14). Interestingly, the replacement of bone grafts from previous craniectomy showed a notably high resorption rate (71.4%), in contrast to split calvarial grafts (0%) and other types of bone grafts (14.3%). Additionally, delayed graft infection was observed in 3.6% of the bone graft group and 7.1% of the PEEK group. Conclusion: Patient-specific alloplastic implants such as PEEK have gained popularity for large and complex cranioplasty, as they provide excellent aesthetic outcomes and leave no donor site morbidity. In contrast, bone grafts remain the gold standard for small to medium-sized cranial defects.

Role of Plastic Surgery in the Treatment of Titanium Mesh Exposure Following Cranioplasty.

BACKGROUND: Titanium mesh cranioplasty is the most common strategy for the repair of skull defects. However, as the frequency of cranioplasty increases, the incidence of titanium mesh exposure following cranioplasty increases as well. This study aimed to investigate the methods and outcomes of plastic surgery in the management of titanium mesh exposure following cranioplasty. METHODS: Patients with titanium mesh exposure following cranioplasty were retrospectively selected from January 2016 to August 2021. Titanium mesh exposure was corrected with reconstructive plastic surgery, including skin grafting, expander insertion, partial removal of the exposed mesh, replacement of the mesh, or flap transplantation. RESULTS: This study included 21 patients with titanium mesh exposure with surgical site infection and a variant of scalp deformity. The age of the patients ranged from 18 to 74 years, with the mean age being 54 years. All patients underwent reconstructive plastic surgery and exhibited complete wound healing. The follow-up period ranged from 17 to 90 months. One patient experienced titanium mesh re-exposure and subsequently underwent an additional procedure for the partial removal of the exposed mesh. No serious complications were observed postoperatively. CONCLUSION: Reconstructive plastic surgery can facilitate wound healing at the titanium mesh exposure site following cranioplasty. However, an individualized treatment strategy is required for each patient, and complications should be managed by adopting standard measures.

Factors Affecting Resorption Following Cranioplasty with an Autologous Bone Graft.

AIM: To evaluate the relationship between the surgical techniques, the waiting time for surgery, postoperative distance between the graft-bone margin and the percentage of bone resorption, we analyzed patients who underwent cranioplasty. Cranioplasty is a necessary surgery to preserve brain tissue and provide an appropriate microenvironment. MATERIAL AND METHODS: In this study, patients who underwent autologous bone grafting after decompressive craniectomy by the Neurosurgery Clinic of University of Health Sciences Ankara Training and Research Hospital between 2018 and 2021 were examined. RESULTS: Thirty-nine patients who underwent autologous cranioplasty following decompressive craniectomy were included in the study. The average expected time for cranioplasty surgery following decompressive craniectomy was 16.97±13.478 weeks (min:2 max:62 weeks). The expected time between decompressive craniectomy and cranioplasty surgeries and resorption rates were compared. The resorption rate was above 30% in 7 of 10 patients with 24 weeks or more between craniectomy and cranioplasty, and less than 30% in 17 of 25 patients in surgeries less than 24 weeks (p=0.04). Following cranioplasty surgery, the distance between the graft-bone margin and the resorption rates were also compared. In this analysis, statistically significant differences were detected between the distance between the graft-bone border and the resorption rates. Resorption rates increased in 15 of 19 patients with a postcranioplasty distance of 1 mm or more (p < 0.00001). CONCLUSION: Early cranioplasty surgery is important in order to reduce complications that may occur after craniectomy. In addition, it is important to keep the defect area small in size during craniectomy surgery and to keep the cutting edge thinner when the bone graft is taken, in order to reduce the development of bone graft resorption.

Use of piezoelectric instrumentation in craniofacial surgery.

PURPOSE OF REVIEW: The use of piezoelectric instrumentation is increasingly recognized as an alternative to traditional bone-cutting techniques across a wide array of surgeries. Here, we provide an overview of the technique, including device principles, benefits, and drawbacks. We also review its use in craniofacial surgery. RECENT FINDINGS: Piezoelectric surgery is a minimally invasive bone-cutting system with lower risk of damage to surrounding soft tissue structures. Indications for its use are rapidly expanding across multiple fields, including craniofacial surgery. To date, piezosurgical techniques have been most widely adopted and studied in the contexts of rhinoplasty, orthognathic surgery, and cranioplasty in craniosynostosis. Piezosurgery can facilitate more precise and consistent osteotomies while decreasing morbidities associated with traditional osteotomy techniques. Primary limitations include cost and concerns regarding increased operative times secondary to operator learning curves and decreased cutting efficiency. SUMMARY: Piezoelectric surgery represents an alternative to traditional bone-cutting modalities to improve precision, consistency, and safety of osteotomies. Further research is needed to better understand the efficacy of the technique as well as potential for additional applications.

Interfaces between Cranial Bone and AISI 304 Steel after Long-Term Implantation: A Case Study of Cranial Screws.

Interfaces between AISI 304 stainless steel screws and cranial bone were investigated after long-term implantation lasting for 42 years. Samples containing the interface regions were analyzed using state-of-the-art analytical techniques including secondary ion mass, Fourier-transform infrared, Raman, and X-ray photoelectron spectroscopies. Local samples for scanning transmission electron microscopy were cut from the interface regions using the focused ion beam technique. A chemical composition across the interface was recorded in length scales covering micrometric and nanometric resolutions and relevant differences were found between peri-implant and the distant cranial bone, indicating generally younger bone tissue in the peri-implant area. Furthermore, the energy dispersive spectroscopy revealed an 80 nm thick steel surface layer enriched by oxygen suggesting that the AISI 304 material undergoes a corrosion attack. The attack is associated with transport of metallic ions, namely, ferrous and ferric iron, into the bone layer adjacent to the implant. The results comply with an anticipated interplay between released iron ions and osteoclast proliferation. The interplay gives rise to an autocatalytic process in which the iron ions stimulate the osteoclast activity while a formation of fresh bone resorption sites boosts the corrosion process through interactions between acidic osteoclast extracellular compartments and the implant surface. The autocatalytic process thus may account for an accelerated turnover of the peri-implant bone.

Alcohol exposure suppresses ribosome biogenesis and causes nucleolar stress in cranial neural crest cells.

Prenatal alcohol exposure (PAE) causes cognitive impairment and a distinctive craniofacial dysmorphology, due in part to apoptotic losses of the pluripotent cranial neural crest cells (CNCs) that form facial bones and cartilage. We previously reported that PAE rapidly represses expression of >70 ribosomal proteins (padj = 10-E47). Ribosome dysbiogenesis causes nucleolar stress and activates p53-MDM2-mediated apoptosis. Using primary avian CNCs and the murine CNC line O9-1, we tested whether nucleolar stress and p53-MDM2 signaling mediates this apoptosis. We further tested whether haploinsufficiency in genes that govern ribosome biogenesis, using a blocking morpholino approach, synergizes with alcohol to worsen craniofacial outcomes in a zebrafish model. In both avian and murine CNCs, pharmacologically relevant alcohol exposure (20mM, 2hr) causes the dissolution of nucleolar structures and the loss of rRNA synthesis; this nucleolar stress persisted for 18-24hr. This was followed by reduced proliferation, stabilization of nuclear p53, and apoptosis that was prevented by overexpression of MDM2 or dominant-negative p53. In zebrafish embryos, low-dose alcohol or morpholinos directed against ribosomal proteins Rpl5a, Rpl11, and Rps3a, the Tcof homolog Nolc1, or mdm2 separately caused modest craniofacial malformations, whereas these blocking morpholinos synergized with low-dose alcohol to reduce and even eliminate facial elements. Similar results were obtained using a small molecule inhibitor of RNA Polymerase 1, CX5461, whereas p53-blocking morpholinos normalized craniofacial outcomes under high-dose alcohol. Transcriptome analysis affirmed that alcohol suppressed the expression of >150 genes essential for ribosome biogenesis. We conclude that alcohol causes the apoptosis of CNCs, at least in part, by suppressing ribosome biogenesis and invoking a nucleolar stress that initiates their p53-MDM2 mediated apoptosis. We further note that the facial deficits that typify PAE and some ribosomopathies share features including reduced philtrum, upper lip, and epicanthal distance, suggesting the facial deficits of PAE represent, in part, a ribosomopathy.

Sex classification of 3D skull images using deep neural networks.

Determining the fundamental characteristics that define a face as "feminine" or "masculine" has long fascinated anatomists and plastic surgeons, particularly those involved in aesthetic and gender-affirming surgery. Previous studies in this area have relied on manual measurements, comparative anatomy, and heuristic landmark-based feature extraction. In this study, we collected retrospectively at Cedars Sinai Medical Center (CSMC) a dataset of 98 skull samples, which is the first dataset of this kind of 3D medical imaging. We then evaluated the accuracy of multiple deep learning neural network architectures on sex classification with this dataset. Specifically, we evaluated methods representing three different 3D data modeling approaches: Resnet3D, PointNet++, and MeshNet. Despite the limited number of imaging samples, our testing results show that all three approaches achieve AUC scores above 0.9 after convergence. PointNet++ exhibits the highest accuracy, while MeshNet has the lowest. Our findings suggest that accuracy is not solely dependent on the sparsity of data representation but also on the architecture design, with MeshNet's lower accuracy likely due to the lack of a hierarchical structure for progressive data abstraction. Furthermore, we studied a problem related to sex determination, which is the analysis of the various morphological features that affect sex classification. We proposed and developed a new method based on morphological gradients to visualize features that influence model decision making. The method based on morphological gradients is an alternative to the standard saliency map, and the new method provides better visualization of feature importance. Our study is the first to develop and evaluate deep learning models for analyzing 3D facial skull images to identify imaging feature differences between individuals assigned male or female at birth. These findings may be useful for planning and evaluating craniofacial surgery, particularly gender-affirming procedures, such as facial feminization surgery.

Angiogenesis is uncoupled from osteogenesis during calvarial bone regeneration.

Bone regeneration requires a well-orchestrated cellular and molecular response including robust vascularization and recruitment of mesenchymal and osteogenic cells. In femoral fractures, angiogenesis and osteogenesis are closely coupled during the complex healing process. Here, we show with advanced longitudinal intravital multiphoton microscopy that early vascular sprouting is not directly coupled to osteoprogenitor invasion during calvarial bone regeneration. Early osteoprogenitors emerging from the periosteum give rise to bone-forming osteoblasts at the injured calvarial bone edge. Microvessels growing inside the lesions are not associated with osteoprogenitors. Subsequently, osteogenic cells collectively invade the vascularized and perfused lesion as a multicellular layer, thereby advancing regenerative ossification. Vascular sprouting and remodeling result in dynamic blood flow alterations to accommodate the growing bone. Single cell profiling of injured calvarial bones demonstrates mesenchymal stromal cell heterogeneity comparable to femoral fractures with increase in cell types promoting bone regeneration. Expression of angiogenesis and hypoxia-related genes are slightly elevated reflecting ossification of a vascularized lesion site. Endothelial Notch and VEGF signaling alter vascular growth in calvarial bone repair without affecting the ossification progress. Our findings may have clinical implications for bone regeneration and bioengineering approaches.

Fluorinated hydroxyapatite conditions a favorable osteo-immune microenvironment via triggering metabolic shift from glycolysis to oxidative phosphorylation.

BACKGROUND: Biological-derived hydroxyapatite is widely used as a bone substitute for addressing bone defects, but its limited osteoconductive properties necessitate further improvement. The osteo-immunomodulatory properties hold crucial promise in maintaining bone homeostasis, and precise modulation of macrophage polarization is essential in this process. Metabolism serves as a guiding force for immunity, and fluoride modification represents a promising strategy for modulating the osteoimmunological environment by regulating immunometabolism. In this context, we synthesized fluorinated porcine hydroxyapatite (FPHA), and has demonstrated its enhanced biological properties and osteogenic capacity. However, it remains unknown whether and how FPHA affects the immune microenvironment of the bone defects. METHODS: FPHA was synthesized and its composition and structural properties were confirmed. Macrophages were cultured with FPHA extract to investigate the effects of FPHA on their polarization and the related osteo-immune microenvironment. Furthermore, total RNA of these macrophages was extracted, and RNA-seq analysis was performed to explore the underlying mechanisms associated with the observed changes in macrophages. The metabolic states were evaluated with a Seahorse analyzer. Additionally, immunohistochemical staining was performed to evaluate the macrophages response after implantation of the novel bone substitutes in critical size calvarial defects in SD rats. RESULTS: The incorporation of fluoride ions in FPHA was validated. FPHA promoted macrophage proliferation and enhanced the expression of M2 markers while suppressing the expression of M1 markers. Additionally, FPHA inhibited the expression of inflammatory factors and upregulated the expression of osteogenic factors, thereby enhancing the osteogenic differentiation capacity of the rBMSCs. RNA-seq analysis suggested that the polarization-regulating function of FPHA may be related to changes in cellular metabolism. Further experiments confirmed that FPHA enhanced mitochondrial function and promoted the metabolic shift of macrophages from glycolysis to oxidative phosphorylation. Moreover, in vivo experiments validated the above results in the calvarial defect model in SD rats. CONCLUSION: In summary, our study reveals that FPHA induces a metabolic shift in macrophages from glycolysis to oxidative phosphorylation. This shift leads to an increased tendency toward M2 polarization in macrophages, consequently creating a favorable osteo-immune microenvironment. These findings provide valuable insights into the impact of incorporating an appropriate concentration of fluoride on immunometabolism and macrophage mitochondrial function, which have important implications for the development of fluoride-modified immunometabolism-based bone regenerative biomaterials and the clinical application of FPHA or other fluoride-containing materials.

Comparison of the Effect of Platelet-rich Plasma (PRP) and Fat Graft on Autologous Bone Grafting in a Randomized-controlled Experimental Skull Model.

Gold standard method for the treatment of critical-sized bone defects is the autogenous bone grafting procedure. A number of new and potentially useful adjuncts currently are being investigated to enhance the success of bone grafting. We propose to evaluate the effect of the most known and easily obtained 2 biological materials, fat graft and platelet-rich plasma (PRP), on bone graft healing. Twenty-seven New Zealand male rabbits were included in this randomized, controlled study. Two-sided 15-mm diameter bone defects were created in the parietal bones and the bones taken were replaced right-to-left and vice versa with 1 control group, 1 fat graft applied group, and the last one PRP applied group. Histologic evaluation and 3-dimensional maxillofacial computerized tomography were performed and bone density was calculated. In radiologic analysis, bone density was significantly different in the PRP group compared with the control and fat graft group in the 12th week ( P <0.05). In histologic scoring analysis, the PRP group had a better score than the control and fat graft group, while the fat graft group was worse than the control group in the 6th week ( P <0.05). The addition of PRP had a positive effect whereas fat graft had a negative effect on bone graft healing compared with the control group.

Evaluation of new bone formation in critical-sized rat calvarial defect using 3D printed polycaprolactone/tragacanth gum-bioactive glass composite scaffolds.

Critical-sized bone defects are a major challenge in reconstructive bone surgery and usually fail to be treated due to limited remaining bone quality and extensive healing time. The combination of 3D-printed scaffolds and bioactive materials is a promising approach for bone tissue regeneration. In this study, 3D-printed alkaline-treated polycaprolactone scaffolds (M-PCL) were fabricated and integrated with tragacanth gum- 45S5 bioactive glass (TG-BG) to treat critical-sized calvarial bone defects in female adult Wistar rats. After a healing period of four and eight weeks, the new bone of blank, M-PCL, and M-PCL/TG-BG groups were harvested and assessed. Micro-computed tomography, histological, biochemical, and biomechanical analyses, gene expression, and bone matrix formation were used to assess bone regeneration. The micro-computed tomography results showed that the M-PCL/TG-BG scaffolds not only induced bone tissue formation within the bone defect but also increased BMD and BV/TV compared to blank and M-PCL groups. According to the histological analysis, there was no evidence of bony union in the calvarial defect regions of blank groups, while in M-PCL/TG-BG groups bony integration and repair were observed. The M-PCL/TG-BG scaffolds promoted the Runx2 and collagen type I expression as compared with blank and M-PCL groups. Besides, the bone regeneration in M-PCL/TG-BG groups correlated with TG-BG incorporation. Moreover, the use of M-PCL/TG-BG scaffolds promoted the biomechanical properties in the bone remodeling process. These data demonstrated that the M-PCL/TG-BG scaffolds serve as a highly promising platform for the development of bone grafts, supporting bone regeneration with bone matrix formation, and osteogenic features. Our results exhibited that the 3D-printed M-PCL/TG-BG scaffolds are a promising strategy for successful bone regeneration.

Bony Surface-Matching Registration of Neuronavigation with Sectioned 3-Dimensional Skull in Prone Position.

BACKGROUND: Neuronavigation has become an essential system for brain tumor resections. It is sometimes difficult to obtain accurate registration of the neuronavigation with the patient in the prone position. Bony surface-matching registration should be more precise than skin surface-matching registration; however, it is difficult to establish bony registration with limited exposed bone. We created a new bony surface-matching method to a sectioned 3-dimensional (3D) virtual skull in a neuronavigation system and registered with a sectioned 3D skull. In this study, the bony surface-matching with sectioned 3D registration is applied to provide precise registration for brain tumor resection in the prone position. METHODS: From May 2023 to April 2024, 17 patients who underwent brain tumor resection in the prone position were enrolled. The navigation system StealthStation S8 (Medtronic, Dublin, Ireland) was used. Bony surface-matching registration with a whole 3D skull in a neuronavigation system was performed. Next, a sectioned 3D skull was made according to the surgical location to compare with the whole 3D skull registration. A phantom model was also used to validate the whole and sectioned 3D skull registration. RESULTS: Whole 3D skull registration was successful for only 2 patients (11.8%). However, sectioned 3D skull registration was successful for 16 patients (94.1%). The examinations with a phantom skull model also showed superiority of sectioned 3D skull registration to whole 3D skull registration. CONCLUSIONS: Sectioned 3D skull registration was superior to whole 3D skull registration. The sectioned 3D skull method could provide accurate registration with limited exposed bone.

Evaluation of Facial Aging in Different Age and Gender Groups With Computed Tomography-Based Calvarium and Face Measurements.

BACKGROUND: The human face is a complex area formed by the combination of many different components and varies among individuals according to gender, age, and ethnicity. OBJECTIVE: The aim of this study was to evaluate age-related changes in the facial and calvarial bones in a large sample of both genders. METHODS: The retrospective study included nontraumatic brain computed tomography scans of 280 Turkish adults. Participants were divided into 7-decade groups with the age ranging from 20 to 89 years. Measurements of the face and calvaria were recorded, and calvarial volume was calculated. The relationship of these parameters with age and gender was examined. RESULTS: Statistically significant differences were observed in all the facial and calvarial measurements, except the transverse diameter of the head, with increasing age in both genders. Regardless of age, no significant differences were found in facial and calvarial measurements between genders. In addition, there was a significant decrease in the calvarial volume in both genders after the seventh decade of life. CONCLUSION: The structure of the face and calvarium continues to change and differentiate throughout life. Taking these changes into account during surgical and facial rejuvenation procedures can help predict outcomes and avoid the use of incorrect techniques.

Design, clinical applications and post-surgical assessment of bioresorbable 3D-printed craniofacial composite implants.

This study details the design, fabrication, clinical trials' evaluation, and analysis after the clinical application of 3D-printed bone reconstruction implants made of nHAp@PLDLLA [nanohydroxyapatite@poly(L-lactide-co-D,L-lactide)] biomaterial. The 3D-printed formulations have been tested as bone reconstruction Cranioimplants in 3 different medical cases, including frontal lobe, mandibular bone, and cleft palate reconstructions. Replacing one of the implants after 6 months provided a unique opportunity to evaluate the post-surgical implant obtained from a human patient. This allowed us to quantify physicochemical changes and develop a spatial map of osseointegration and material degradation kinetics as a function of specific locations. To the best of our knowledge, hydrolytic degradation and variability in the physicochemical and mechanical properties of the biomimetic, 3D-printed implants have not been quantified in the literature after permanent placement in the human body. Such analysis has revealed the constantly changing properties of the implant, which should be considered to optimize the design of patient-specific bone substitutes. Moreover, it has been proven that the obtained composition can produce biomimetic, bioresorbable and bone-forming alloplastic substitutes tailored to each patient, allowing for shorter surgery times and faster patient recovery than currently available methods.

METTL3 Modulates Ctsk+ Lineage Supporting Cranial Osteogenesis via Hedgehog.

N6-methyladenosine (m6A) modification, a eukaryotic messenger RNA modification catalyzed by methyltransferase-like 3 (METTL3), plays a pivotal role in stem cell fate determination. Calvarial bone development and maintenance are orchestrated by the cranial sutures. Cathepsin K (CTSK)-positive calvarial stem cells (CSCs) contribute to mice calvarial ossification. However, the role of m6A modification in regulating Ctsk+ lineage cells during calvarial development remains elusive. Here, we showed that METTL3 was colocalized with cranial nonosteoclastic Ctsk+ lineage cells, which were also associated with GLI1 expression. During neonatal development, depletion of Mettl3 in the Ctsk+ lineage cells delayed suture formation and decreased mineralization. During adulthood maintenance, loss of Mettl3 in the Ctsk+ lineage cells impaired calvarial bone formation, which was featured by the increased bone porosity, enhanced bone marrow cavity, and decreased number of osteocytes with the less-developed cellular outline. The analysis of methylated RNA immunoprecipitation sequencing and RNA sequencing data indicated that loss of METTL3 reduced Hedgehog (Hh) signaling pathway. Restoration of Hh signaling pathway by crossing Sufufl/+ alleles or by local administration of SAG21 partially rescued the abnormity. Our data indicate that METTL3 modulates Ctsk+ lineage cells supporting calvarial bone formation by regulating the Hh signaling pathway, providing new insights for clinical treatment of skull vault osseous diseases.

Functional ultrasound imaging of human brain activity through an acoustically transparent cranial window.

Visualization of human brain activity is crucial for understanding normal and aberrant brain function. Currently available neural activity recording methods are highly invasive, have low sensitivity, and cannot be conducted outside of an operating room. Functional ultrasound imaging (fUSI) is an emerging technique that offers sensitive, large-scale, high-resolution neural imaging; however, fUSI cannot be performed through the adult human skull. Here, we used a polymeric skull replacement material to create an acoustic window compatible with fUSI to monitor adult human brain activity in a single individual. Using an in vitro cerebrovascular phantom to mimic brain vasculature and an in vivo rodent cranial defect model, first, we evaluated the fUSI signal intensity and signal-to-noise ratio through polymethyl methacrylate (PMMA) cranial implants of different thicknesses or a titanium mesh implant. We found that rat brain neural activity could be recorded with high sensitivity through a PMMA implant using a dedicated fUSI pulse sequence. We then designed a custom ultrasound-transparent cranial window implant for an adult patient undergoing reconstructive skull surgery after traumatic brain injury. We showed that fUSI could record brain activity in an awake human outside of the operating room. In a video game "connect the dots" task, we demonstrated mapping and decoding of task-modulated cortical activity in this individual. In a guitar-strumming task, we mapped additional task-specific cortical responses. Our proof-of-principle study shows that fUSI can be used as a high-resolution (200 µm) functional imaging modality for measuring adult human brain activity through an acoustically transparent cranial window.

Conceptual Principles in Pediatric Craniomaxillofacial Reconstruction.

Pediatric craniomaxillofacial reconstruction must be approached through the lens of growth and durability. A systematic approach of matching defects to donor tissue drives the selection of autologous reconstructive technique. The menu of available methods for reconstruction can be organized in a manner similar to adults, with special considerations for growth and development. Reconstructive surgeons have the opprtunity to promote and maintain young patients' sense of identity during psychosocial development.

Pediatric Cranial Vault Pathology.

A wide variety of diagnoses can be approached with a common framework for diagnosis, extirpation, and reconstruction of pediatric cranial vault pathologies. Durability of reconstruction is critical for the range of pediatric patients from infancy to adolescence. Rigid reconstruction, preferably with autologous tissue when possible, promotes brain protection and satisfactory aesthetic outcome. Careful planning can allow for immediate definitive reconstruction of defects without need for further surgical intervention.

Mussel-inspired antimicrobial hydrogel with cellulose nanocrystals/tannic acid modified silver nanoparticles for enhanced calvarial bone regeneration.

Bacterial infection is a serious challenge in the treatment of open bone defects, and reliance on antibiotic therapy may contribute to the emergence of drug-resistant bacteria. To solve this problem, this study developed a mineralized hydrogel (PVA-Ag-PHA) with excellent antibacterial properties and osteogenic capabilities. Silver nanoparticles (CNC/TA@AgNPs) were greenly synthesized using natural macromolecular cellulose nanocrystals (CNC) and plant polyphenolic tannins (TA) as stabilizers and reducing agents respectively, and then introduced into polyvinyl alcohol (PVA) and polydopamine-modified hydroxyapatite (PDA@HAP) hydrogel. The experimental results indicate that the PVA-Ag-PHA hydrogel, benefiting from the excellent antibacterial properties of CNC/TA@AgNPs, can not only eliminate Staphylococcus aureus and Escherichia coli, but also maintain a sustained sterile environment. At the same time, the HAP modified by PDA is uniformly dispersed within the hydrogel, thus releasing and maintaining stable concentrations of Ca2+ and PO43- ions in the local environment. The porous structure of the hydrogel with excellent biocompatibility creates a suitable bioactive environment that facilitates cell adhesion and bone regeneration. The experimental results in the rat critical-sized calvarial defect model indicate that the PVA-Ag-PHA hydrogel can effectively accelerate the bone healing process. Thus, this mussel-inspired hydrogel with antibacterial properties provides a feasible solution for the repair of open bone defects, demonstrating the considerable potential for diverse applications in bone repair.