Extracting the truth through chemical analyses: Early life histories of Victorian-era dental patients in Aotearoa New Zealand.

OBJECTIVES: There are few bioarcheological analyses of life experiences in colonial period Aotearoa New Zealand, despite this being a time of major adaptation and social change. In our study, early life histories are constructed from multi-isotope and enamel peptide analysis of permanent first molars associated with Victorian era dental practices operating between AD 1881 and 1905 in Invercargill. Chemical analyses of the teeth provide insight into the childhood feeding practices, diet, and mobility of the people who had their teeth extracted. MATERIALS AND METHODS: Four permanent left mandibular first molars were analyzed from a cache of teeth discovered at the Leviathan Gift Depot site during excavations in 2019. The methods used were: (1) enamel peptide analysis to assess chromosomal sex; (2) bulk (δ13 Ccarbonate ) and incremental (δ13 Ccollagen and δ15 N) isotope analysis of dentin to assess childhood diet; and (3) strontium (87 Sr/86 Sr) and oxygen (δ18 O) isotope analysis of enamel to assess childhood residency. Two modern permanent first molars from known individuals were analyzed as controls. RESULTS: The archaeological teeth were from three chromosomal males and one female. The protein and whole diets were predominately based on C3 -plants and domestic animal products (meat and milk). A breastfeeding signal was only identified in one historic male. All individuals likely had childhood residences in Aotearoa. DISCUSSION: Unlike most bioarcheological studies that rely on the remains of the dead, the teeth analysed in this study were extracted from living people. We suggest that the dental patients were likely second or third generation colonists to Aotearoa, with fairly similar childhood diets. They were potentially lower-class individuals either living in, or passing through, the growing colonial center of Invercargill.

Physiochemical characteristics: A robust tool to overcome teeth heterogeneity on predicting laser ablation profile.

To avoid excessive tissue removal and collateral damage, the high-power density laser is apt for dental surgery also need to have high precision. For high-precision dental surgery with minimal tissue damage, the present work frames a method to predict laser ablation profile based on surface morphology and chemical composition of dentin. The surface morphology and chemical composition were studied on different dentin samples using scanning electron microscope (SEM) and Energy Dispersive X-ray Analysis (EDAX), respectively. The key laser ablation parameters (ω0 , Deff , and Fth ) were determined by laser irradiation study using 800 nm, Ti:Sapphire femtosecond laser at processing condition of 100 fs, 10 kHz and 10 mm/s. The dentin samples show a strong linear correlation between physiochemical characteristics and laser ablation parameters. The surface morphology exhibits a negative linear correlation with threshold fluence, whereas the converse is true for chemical composition. The laser ablation parameters of a random dentin sample are derived from the knowledge of linearity data. From the obtained laser ablation parameters, the complete theoretical ablation profile is constructed and validated with experimental ablation profile. Even though the surface morphology of dentin shows high linearity, the concentration of Ca and P can be used as the most feasible probe in clinical settings. Furthermore, the laser ablation rate and ablation efficiency are predicted by the method to optimize the laser processing condition for any specific teeth. The versatility of the method overcomes the problem of heterogeneity on various teeth and simplifies the method of finding optimal laser processing condition for immaculate laser surgery.

Osteogenic Potential of Decellularized Tooth Matrix.

We studied the possibility of using decellularized tooth matrix as a scaffold to restore bone tissue. It was found that mesenchymal stem cells underwent spontaneous osteogenic differentiation on the decellularized tooth matrix, which makes it possible to use it as a natural allograft in the treatment of resorption of alveolar bone tissue.

Expression, localization and synthesis of small leucine-rich proteoglycans in developing mouse molar tooth germ.

The gene expression and protein synthesis of small leucine-rich proteoglycans (SLRPs), including decorin, biglycan, fibromodulin, and lumican, was analyzed in the context of the hypothesis that they are closely related to tooth formation. In situ hybridization, immunohistochemistry, and organ culture with metabolic labeling of [35S] were carried out in mouse first molar tooth germs of different developmental stages using ICR mice at embryonic day (E) 13.5 to postnatal day (P) 7.0. At the bud and cap stage, decorin mRNA was expressed only in the surrounding mesenchyme, but not within the tooth germ. Biglycan mRNA was then expressed in the condensing mesenchyme and the dental papilla of the tooth germ. At the apposition stage (late bell stage), both decorin and biglycan mRNA were expressed in odontoblasts, resulting in a switch of the pattern of expression within the different stages of odontoblast differentiation. Decorin mRNA was expressed earlier in newly differentiating odontoblasts than biglycan. With odontoblast maturation and dentin formation, decorin mRNA expression was diminished and localized to the newly differentiating odontoblasts at the cervical region. Simultaneously, biglycan mRNA took over and extended its expression throughout the new and mature odontoblasts. Both mRNAs were expressed in the dental pulp underlying the respective odontoblasts. At P7.0, both mRNAs were weakly expressed but maintained their spatial expression patterns. Immunostaining showed that biglycan was localized in the dental papillae and pulp. In addition, all four SLRPs showed clear immunostaining in predentin, although the expressions of fibromodulin and lumican mRNAs were not identified in the tooth germs examined. The organ culture data obtained supported the histological findings that biglycan is more predominant than decorin at the apposition stage. These results were used to identify biglycan as the principal molecule among the SLRPs investigated. Our findings indicate that decorin and biglycan show spatial and temporal differential expressions and play their own tissue-specific roles in tooth development.

Direct radiation-induced effects on dental hard tissue.

BACKGROUND: Radiation caries is a complication of radiotherapy characterized by enamel erosion and dentin exposure. The mechanisms of characteristic radiation caries formation are not well-understood. The aim of this study was to evaluate the direct radiation-induced effects on dental hard tissue and investigate their role in the formation of radiation caries. METHODS: Sixty non-carious third molars were divided into three groups (n = 20), which would be exposed to 0 Gy, 30 Gy, and 60 Gy radiation, respectively. After radiation, microhardness and elastic modulus were measured at four depths by means of a Vickers microhardness tester and atomic force microscopy (AFM). The microstructure was observed by scanning electron microscopy (SEM). X-ray diffraction and Raman microspectroscopy were used to determine crystal properties and protein/mineral (2931/960 cm- 1) ratios. RESULTS: A statistically significant decrease in microhardness and elastic modulus values 50 µm from the dentino-enamel junction (DEJ) in enamel was revealed in the 30-Gy and 60-Gy groups. With the increasing dose, destruction of interprismatic substance and fissures at the DEJ-adjacent region were found. A greater reduction of crystallinity was revealed in enamel compared with dentin. Raman spectroscopic analysis showed a slight increase of the protein/mineral ratio for enamel following accumulated radiation, while the protein/mineral ratio for dentin was decreased. CONCLUSIONS: Radiation could directly alter the mechanical properties, micro-morphology, crystal properties, and chemical composition of dental hard tissue. The early destruction of DEJ-adjacent enamel, combined with decreased crystallinity of enamel under radiation exposure, may be related to the formation of characteristic radiation caries.

Laser Photobiomodulation Over Teeth Subjected to Orthodontic Movement.

Background: Orthodontics of the 21st century requires aesthetic, painless, predictable, and quick treatments. This demand for faster results generated orthodontic movement acceleration protocols (OMAPs); among other OMAPs we present low-level laser (LLL) as a candidate. Objective: To evaluate levels of interleukin (IL)-1, IL-10, and type 1 collagen in the periodontal ligament of first molars of rats subjected to orthodontic traction with and without LLL irradiation, compared with untreated controls (CO), and to evaluate whether the dose of LLL used in this work is eligible as an OMAP. Materials and methods: A total of 35 male Wistar rats were distributed into three groups: group 1 NI (nonirradiated) n = 15, group 2 IR (laser irradiated using 5 J, 177 J/cm2, and 100 mW applied in contact to the vestibular mesial, vestibular distal, and palatal faces of gum tissue around molar region for 50 sec each point, for 3 consecutive days, immediately 24 and 48 h after orthodontic device placement.) n = 15, and group 3 CO n = 5; groups 1 and 2 were subjected to orthodontic force and each group was divided into three subgroups that were sacrificed after 3, 5, and 7 days, IL-1/10 and COL-1 levels were analyzed. Results: In the IR group, levels of IL-1/10 and COL-1 showed peak anticipation after LLL irradiation compared with those in the NI and CO groups. Conclusions: These results can also infer that this dose of LLL can be used as an OMAP.

Effect of different modes of erbium:yttrium aluminum garnet laser on shear bond strength to dentin.

OBJECTIVES: The aim of this study was to evaluate the effect of different surface treatments on the shear bond strength (SBS) of resin composites to dentin using total etch dentin bonding adhesives. MATERIALS AND METHODS: Sixty extracted human molars were flattened to obtain dentin surfaces. The samples were divided into three groups (n = 20): Group I: 37% phosphoric acid + optibond FL + resin composite; Group II: Erbium:yttrium aluminum garnet (Er:YAG) laser (medium short pulse [MSP] mode, 120 mJ/10 Hz) + optibond FL + resin composite; Group III: Er:YAG laser (quantum square pulse [QSP] mode, 120 mJ/10 Hz) + optibond FL + resin composite. After the specimens were prepared, the SBS test was performed at a crosshead speed of 0.5 mm/min. The fractured specimens were examined under a stereomicroscope to evaluate the fracture pattern. Statistical analyses were performed with one-way ANOVA and Tukey's honestly significant difference tests. One sample of treated dentin surface from each group was sputter-coated with gold, and scanning electron microscope (SEM) images were captured. RESULTS: Acid etching showed significantly higher SBS than the other groups (P < 0.05). However, the difference between Er:YAG MSP and QSP mode groups was not statistically significant (P > 0.05). SEM images of the acid-etched dentin surface showed opened dentinal tubule with a regular surface, but Er:YAG MSP mode treated surface was irregular. The surface treated with Er:YAG QSP mode represented wide dentinal tubules with a clean and flat surface. CONCLUSION: Using different modes (MSP and QSP) of Er:YAG laser for dentin surface treatment before application of total etch adhesives is still not an sufficient alternative compared to acid etching.

The evaluation of the effect of carbon dioxide laser radiation on dentine tissue.

of this study was to analyze the effects of carbon dioxide (CO2) laser light on the structure and elemental composition of dentine. METHODS: The evaluation was conducted on samples from extracted teeth. The surface of the dentine was exposed to the radiation from a CTL 1401 CO2 laser (Centre of Laser Technology, Poland). The radiation and frequency parameters were as follows: group I with 5 W and 1 Hz, group II with 10 W and 1 Hz, group III with 5 W and 5 Hz, and group IV with 10 W and 5 Hz. The altered dentine structure was macroscopically and microscopically evaluated using a Nova NanoSEM 200 Scanning Electron Microscope (FEI Europe) with integrated microanalysis X-ray system for elemental analysis in points. RESULTS: There were significant differences between groups in the macro- and microstructure of laser defects. CONCLUSIONS: CO2 laser radiation causes irreversible, destructive changes in dentine. The structural dentine lesions developed under the influence of the CO2 laser radiation may hinder proper adhesion of bonding systems with the damaged tissue. Laser defects in the structure should be treated like defects of noncarious origin requiring preparation and filling with composite materials in accordance with the procedures.

Effects of different desensitizers and lasers on dentine tubules: An in-vitro analysis.

BACKGROUND: Dentin hypersensitivity is an important clinical problem affecting a large percentage of the population, and various therapies have been suggested for its treatment-among them desensitizing agents and lasers. The aim of this study was to evaluate the in vitro effects of different in-office desensitizing agents and different type lasers, alone or in combination, on human dentinal tubules. MATERIALS AND METHODS: Eighty-four dentinal specimens obtained from freshly extracted impacted third molars were included and subsequently divided into seven groups: Group 1 (Control), Group 2 (Gluma desensitizer), Group 3 (Teethmate desensitizer), Group 4 (Nd:YAG laser), Group 5 (Er:YAG laser), Group 6 (Gluma desensitizer + Er:YAG laser), and Group 7 (Teethmate desensitizer + Er:YAG laser). The dentinal specimens of all groups were evaluated using SEM. A total of 12 images per sample were taken, and the numbers of open, partially occluded, and totally visible (open + partially occluded) dentinal tubules were counted. AFM was used to further substantiate the blocking mechanism. The data were analyzed by one-way ANOVA and Dunnett-C tests. RESULTS: Comparison of the number of occluded dentinal tubules per 100 µm2 revealed that the laser and laser combined-treated groups showed the most occluded dentinal tubules. Gluma desensitizer + Er:YAG laser combination demonstrated significantly more tubule occlusion than all the other groups (p < .05). CONCLUSIONS: The results of this study show that combined treatment methods were effective in the occlusion of dentinal tubules.

Continuity or conquest? A multi-isotope approach to investigating identity in the Early Iron Age of the Southern Levant.

OBJECTIVES: Across the Mediterranean and Near East, the transition from the Late Bronze Age (ca. 1550-1200 BC) to the Early Iron Age (ca. 1200-900 BC) was accompanied by profound cultural change. While this transformation was initially attributed to invasion or conquest, more recent, nuanced interpretations of archaeological and biological data now emphasize the decline of palatial economies, a shift away from centralized political authority, and internal social restructuring amidst rapid climate change in lieu of "collapse." Correspondingly, the hypothesis that Early Iron Age populations in Palestine represent the same ethnic group whose culture nevertheless underwent considerable change by actively adapting to internal and external forces was tested using biogeochemical data from individuals interred within an Early Iron Age tomb at the site of Tell Dothan. MATERIALS AND METHODS: Human dental enamel from molars (n = 43) recovered from Tomb I at Tell Dothan was analyzed for radiogenic strontium isotope ratios and stable oxygen and carbon (VPDB) isotope values. RESULTS: Strontium (mean = 0.70816 ± 0.00005, 1σ) isotope ratios, as well as oxygen (mean = -2.3 ± 0.7‰, 1σ) and carbon (mean = -11.9 ± 0.5‰, 1σ) isotope values, all display little variability. DISCUSSION: The absence of non-locals at Tell Dothan indicates that population replacement does not adequately explain the sociopolitical changes observed in the archaeological record. Further, homogeneity among isotope values is indicative of a community that was not highly mobile, suggesting that decentralization and a corresponding transition to a more mobile lifestyle may not accurately reflect the adaptive strategies of all human groups during this period as a mechanism to cope with social and environmental change.

RANKL and OPG expression: Jiggling force affects root resorption in rats.

OBJECTIVE: To immunohistochemically investigate the longitudinal changes in root resorption by jiggling force in experimental animal models. MATERIALS AND METHODS: Fifty-six 12-week-old male Wistar rats were used. The maxillary first molars were alternately moved in the buccal and lingual direction in 28 rats (experimental group) using an experimental appliance to produce jiggling forces of 10 g. In another 28 rats (control group), the maxillary first molars were moved in only the lingual direction with a force of 10 g. After 1, 3, 7, 10, 14, 17, and 21 days, the maxillae were resected and subjected to immunohistochemical analysis. The resorption area was quantified histomorphometrically and the number of odontoclasts on the root surface was counted. Expression of RANKL and OPG was also examined by immunohistochemical staining. RESULTS: The root resorption area and the number of odontoclasts were significantly greater in the experimental group than in controls. Odontoclasts were detected in the resorption lacunae and PDL in the experimental group, whereas osteoclasts were located only along the alveolar bone in controls. OPG was detected on the alveolar bone in the experimental group and on the root surfaces of the controls. CONCLUSIONS: Jiggling force is a critical factor in severe root resorption, affecting RANKL and OPG expression, which accelerates and inhibits odontoclastic induction, respectively.

Analgesic use - prevalence, biomonitoring and endocrine and reproductive effects.

Paracetamol and NSAIDs, in particular acetylsalicylic acid (aspirin) and ibuprofen, are among the most used and environmentally released pharmaceutical drugs. The differences in international trends in the sale and consumption of mild analgesics reflect differences in marketing, governmental policies, habits, accessibility, disease patterns and the age distribution of each population. Biomonitoring indicates ubiquitous and high human exposure to paracetamol and to salicylic acid, which is the main metabolite of acetylsalicylic acid. Furthermore, evidence suggests that analgesics can have endocrine disruptive properties capable of altering animal and human reproductive function from fetal life to adulthood in both sexes. Medical and public awareness about these health concerns should be increased, particularly among pregnant women.

Evaluation of the Morphological Characteristics of Laser-Irradiated Dentin.

OBJECTIVE: The aim of this study was to investigate the effect of different energy settings of Er:YAG laser irradiation on dentin surface morphology with respect to the number of opened dentinal tubules. BACKGROUND DATA: An ideally prepared dentin surface with opened dentinal tubules is a prerequisite for adhesive fixation. No study, however, has yet compared the numbers of opened dentinal tubules with regard to statistical differences. METHODS: Conventional preparations using a bur with or without additional acid etching acted as control groups. Dentin specimens were prepared from human third molars and randomly divided into eight groups according to the energy settings of the laser (1, 1.5, 4, 6, 7.5, and 8 W) and two controls (bur and bur plus acid etching). After surface preparation, dentin surfaces were analyzed with a scanning electron microscope, and the number of opened dentinal tubules in a defined area was counted. RESULTS: The control groups showed smooth surfaces with (bur plus acid etching) and without opened dentinal tubules (bur), whereas all laser-irradiated surfaces showed rough surfaces. Using the energy setting of 4 W resulted in significantly more opened dentinal tubules than the conventional preparation technique using the bur with additional acid etching. In contrast, the energy setting of 8 W showed significantly fewer opened dentinal tubules, and also exhibited signs of thermal damage. CONCLUSIONS: The Er:YAG laser with an energy setting of 4 W generates a dentin surface with opened dentinal tubules, a prerequisite for adhesive fixation.

Comparative evaluation of pro-inflammatory cytokine levels in pulpotomized primary molars.

The present in vivo study was performed to investigate the levels of the pro-inflammatory cytokines, interleukin (IL)-1α, IL-6, and IL-8, in primary molars for which pulpotomy was clinically indicated, and to evaluate the success rates of three different pulpotomy agents employed for cariously (CExp) or mechanically exposed (MExp) primary molars. Forty-seven primary molars were classified as MExp or CExp according to the type of pulpal exposure. Pulp tissue was harvested and analyzed using enzyme-linked immunosorbent assay (ELISA). Subsequently, three pulpotomy agents-calcium hydroxide (CH), mineral trioxide aggregate (MTA), and formocresol (FC)-were applied randomly, and the outcome was observed radiographically for 18 months. Levels of IL-6 and IL-8 were significantly higher in CExp pulp than in MExp pulp (P < 0.05). In the CH pulpotomy group, MExp teeth showed a higher success rate than CExp teeth. There was no significant difference in success rate between MExp and CExp teeth in both the FC and MTA groups. The levels of IL-6 and IL-8 have the potential to become indicators of pulp status and can be monitored by researchers to make the prognosis of vital pulp therapies less uncertain. As MTA and FC yielded higher rates of success than CH in CExp teeth, the choice of pulpotomy agent appears to be important in this context.

Effective dentin restorative material based on phosphate-terminated dendrimer as artificial protein.

In clinic, it calls for effective and simple materials to repair etched dentin. Bioinspired by the natural mineralization process guided by noncollagenous proteins (NCPs), in this work, we synthesized the fourth generation phosphate-terminated polyamidoamine dendrimer (G4-PO3H2) by one-step modification. We used FT-IR and 1H NMR to characterize the structure of G4-PO3H2, and MTT assay to prove its biocompatibility. It was applied as the analog of dentin phosphophoryn (DPP: a type of NCPs) to repair dentin, due to its similar dimensional scale, topological architecture and peripheral functionalities to that of DPP. By the characterization of SEM and XRD, the effective regeneration of human dentin induced by G4-PO3H2 is characterized and illustrated both in vitro (artificial saliva) and in vivo (oral cavity of rats). It is noted that the thickness of the regenerated mineral layers are more than 10 µm both in vitro and in vivo. The design strategy of G4-PO3H2 may be valuable for researchers in the fields of material science, stomatology and medicine to prepare various promising restorative nano-materials for biomineralized hard tissues such as bone and teeth.

Receptor activator of nuclear factor-kappa ligand, OPG, and IGF-I expression during orthodontically induced inflammatory root resorption in the recombinant human growth hormone-treated rats.

OBJECTIVE: To investigate the effects of growth hormone (GH) on local receptor activator of nuclear factor-kappa ligand (RANKL), OPG, and IGF-I expression during orthodontically induced inflammatory root resorption in rats. MATERIALS AND METHODS: Forty Wistar rats (gender: male; age: 7 weeks) were randomly divided into control and experimental groups. A force of 50 g was applied to move the right upper first molars mesially. The experimental and control groups received daily subcutaneous injections of recombinant human growth hormone (GH; 2 mg/kg) and equivalent volumes of saline, respectively. The rats were sacrificed on days 1, 3, 7, and 14. Micro-computed tomography-reconstructed images of the upper right first molars were used to survey root resorption and tooth movement. Horizontal sections of the maxillae were prepared for hematoxylin and eosin, tartrate-resistant acid phosphatase, and immunohistochemical staining. RESULTS: Resorption lacunae appeared on the compressed side of the distal buccal root of the right first molar on days 7 and 14. Compared with the control groups, GH-treated groups showed more RANKL-positive cells and osteoclasts on day 3 and more OPG- and IGF-I-positive cells and fewer odontoclasts on days 7 and 14. Indexes of root resorption were lower and tooth movement was faster in the GH-treated groups than in the control groups on days 7 and 14. CONCLUSIONS: The inhibitory effect of GH on root resorption by heavy force might be mediated by RANKL/OPG and IGF-I. Short-term GH administration may be a method with which to reduce root resorption and shorten treatment time, especially in patients who are susceptible to root resorption.

Benign odontogenic tumors versus histochemically related tissues: preliminary results from mid-infrared and solid-state nuclear magnetic resonance spectroscopy.

Three types of human odontogenic tumors histologically classified as compound composite odontoma, ossifying fibroma, and Pindborg tumor were characterized using mid-infrared spectroscopy (mid-IR) and solid-state nuclear magnetic resonance (ssNMR). For comparison, human jawbone and dental mineralized tissues such as dentin, enamel, and dental cement were also characterized. The studies focused on the structural properties and chemical composition of pathological tissues versus histochemically related tissues. All analyzed tumors were composed of organic and mineral parts and water. Apatite was found to be the main constituent of the mineral part. Various components (water, structural hydroxyl groups, carbonate ions (CO(3)(2-)), and hydrogen phosphate ions (HPO(4)(2-))) and physicochemical parameters (index of apatite maturity and crystallinity) were examined. The highest organic/mineral ratio was observed in fibrocementoma, a finding that can be explained by the fibrous character of the tumor. The lowest relative HPO(4)(2-) content was found in odontoma. This tumor is characterized by the highest mineral crystallinity index and content of structural hydroxyl groups. The Pindborg tumor mineral portion was found to be poorly crystalline and rich in HPO(4)(2-). The relative CO(3)(2-) content was similar in all samples studied. The results of spectroscopic studies of odontogenic tumors were consistent with the standard histochemical analysis. It was shown that the various techniques of ssNMR and elaborate analysis of the mid-IR spectra, applied together, provide valuable information about calcified benign odontogenic tumors.

Measurements of erbium laser-ablation efficiency in hard dental tissues under different water cooling conditions.

Laser triangulation measurements of Er:YAG and Er,Cr:YSGG laser-ablated volumes in hard dental tissues are made, in order to verify the possible existence of a "hydrokinetic" effect that has been proposed as an alternative to the "subsurface water expansion" mechanism for hard-tissue laser ablation. No evidence of the hydrokinetic effect could be observed under a broad range of tested laser parameters and water cooling conditions. On the contrary, the application of water spray during laser exposure of hard dental material is observed to diminish the laser-ablation efficiency (AE) in comparison with laser exposure under the absence of water spray. Our findings are in agreement with the generally accepted principle of action for erbium laser ablation, which is based on fast subsurface expansion of laser-heated water trapped within the interstitial structure of hard dental tissues. Our measurements also show that the well-known phenomenon of ablation stalling, during a series of consecutive laser pulses, can primarily be attributed to the blocking of laser light by the loosely bound and recondensed desiccated minerals that collect on the tooth surface during and following laser ablation. In addition to the prevention of tooth bulk temperature buildup, a positive function of the water spray that is typically used with erbium dental lasers is to rehydrate these minerals, and thus sustaining the subsurface expansion ablation process. A negative side effect of using a continuous water spray is that the AE gets reduced due to the laser light being partially absorbed in the water-spray particles above the tooth and in the collected water pool on the tooth surface. Finally, no evidence of the influence of the water absorption shift on the hypothesized increase in the AE of the Er,Cr:YSGG wavelength is observed.

Effect of orthodontic force on inflammatory periodontal tissue remodeling and expression of IL-6 and IL-8 in rats.

OBJECTIVE: To investigate effect of orthodontic force on inflammatory periodontal tissue remodeling and expression of IL-6 and IL-8 in rats. METHODS: Eighty SD rats were randomly divided into 4 groups, blank control group (group A) with 5 rats, treatment normal group (group B) with 25 rats, inflammation control group (group (group C) with 25 rats, inflammation treatment group (group D) with 25 rats. Immunohistochemistry and histomorphometric analysis was performed to measure the expression of IL-6, IL-8 and the first molar to the recent movement in the distance. RESULTS: The expression of IL-8 reached a maximum on day 5 and declined thereafter in group B; the expression of IL-6 reached a maximum on day 5 in group B. The expression of IL-6 and IL-8 was gradually weakened with time in group C. The expression of IL-6 and IL-8 were high, and reached a maximum on day 5 and declined thereafter in group D. AD of positive cells in group D were higher than group B at each time point (P<0.05). The time which 0.49 N orthodontic force was loaded was longer, orthodontic tooth movement distance was greater. Movement distance in group D were longer than group B (P<0.05). CONCLUSIONS: Orthodontic force as well as inflammatory stimulus can evoke the expression of IL-6 and IL-8. Under the combined effects of inflammation and orthodontic force, the expression of IL-6, IL-8 will increase.

The morphology and mineralization of dental hard tissue in the offspring of passive smoking rats.

OBJECTIVE: To study the effects of maternal passive smoking on the morphology and mineralization of dental hard tissue in offspring rats. DESIGN: We have established a maternal passive smoking model. Offspring rats were sacrificed on the 20th day of gestation (E20) or the 3rd (D3) or 10th day (D10) after birth. We observed hard tissue morphology using Haematoxylin-Eosin (H&E) staining sections, used micro computer tomography (Micro-CT) to measure hard tissue thickness and volume on the mandibular first molars of the offspring rats, and used Micro-CT and energy dispersive X-ray spectroscopy with scanning electron microscopy (SEM/EDS) to determine the hard tissue mineral density and the ratio of calcium atom number/calcium atom+phosphorus atom number (Ca(2+)/P(3-)+Ca(2+)). RESULTS: Overall, the development of dental hard tissue was delayed in the offspring of passive smoking rats. The thickness and volume of hard tissue were lower in the offspring of the maternal passive smoking group than in the offspring of the control group. Mineral density of the hard tissue and the ratio of (Ca(2+)/P(3-)+Ca(2+)) were also reduced in the offspring of the maternal passive smoking group. CONCLUSION: Maternal passive smoking inhibits the morphological development and mineralization level of hard tissue on the mandibular first molars of offspring rats.