Combined Effect of Protease, Hemicellulase and Pectinase on the Quality of Hemp Seed Oil (Cannabis sativa L.) Obtained by Aqueous Enzymatic Extraction as an Eco-friendly Method.

The objective of this research was to evaluate the efficiency of aqueous enzymatic extraction (AEE) to obtain oil from hemp seeds (Cannabis sativa L.) grown in northern Morocco. Optimisation of AEE extraction parameters, including pH, enzyme concentration (hemicellulase, protease and pectinase), temperature and incubation time, to maximize oil yield was achieved using response surface methodology with a central composite design. For comparison, the solvent extraction (Soxhlet) (SE) method was also used. Optimized hydrolysis conditions involved incubation for 4 hours at 60°C with a pH of 6.5, using a multi-enzyme preparation comprising protease, hemicellulase and pectinase at concentrations of 55, 202.5 and 234 U/mg, respectively. Referring to the conventional Soxhlet extraction (SE), Aqueous Enzymatic Extraction (AEE) achieved a 30.65% oil recovery rate under the optimized parameters mentioned above. The use of enzymes produced an oil that was more stable against oxidation than the solvent-extracted oil, with a peroxide value (PV) of 19.54 and 47.87 meq O 2 /kg, respectively. Furthermore, HPLC-DAD analysis of tocopherol content indicated a higher total tocopherol content (547.2 mg/kg) in Aqueous Enzymatic Extraction (AEE) compared to Soxhlet Extraction (SE) (513.51 mg/kg), with γ-tocopherol being the predominant form. No significant differences in fatty acid composition were observed between the two extraction methods with linoleic acid and alpha-linolenic acid being the predominant constituents.

Charge block-driven liquid-liquid phase separation - mechanism and biological roles.

Liquid-liquid phase separation (LLPS) has increasingly been found to play pivotal roles in a number of intracellular events and reactions, and has introduced a new paradigm in cell biology to explain protein-protein and enzyme-ligand interactions beyond conventional molecular and biochemical theories. LLPS is driven by the cumulative effects of weak and promiscuous interactions, including electrostatic, hydrophobic and cation-π interactions, among polypeptides containing intrinsically disordered regions (IDRs) and describes the macroscopic behaviours of IDR-containing proteins in an intracellular milieu. Recent studies have revealed that interactions between 'charge blocks' - clusters of like charges along the polypeptide chain - strongly induce LLPS and play fundamental roles in its spatiotemporal regulation. Introducing a new parameter, termed 'charge blockiness', into physicochemical models of disordered polypeptides has yielded a better understanding of how the intrinsic amino acid sequence of a polypeptide determines the spatiotemporal occurrence of LLPS within a cell. Charge blockiness might also explain why some post-translational modifications segregate within IDRs and how they regulate LLPS. In this Review, we summarise recent progress towards understanding the mechanism and biological roles of charge block-driven LLPS and discuss how this new characteristic parameter of polypeptides offers new possibilities in the fields of structural biology and cell biology.

Application of newly developed and validated LC-MS/MS method for pharmacokinetic study of adagrasib and pembrolizumab simultaneously in rat plasma.

Non-small cell lung cancer (NSCLC) is a significant subtype of lung cancer, and poses a dangerous global threat. One of the current approaches of NSCLC treatment is a combination therapy of adagrasib and pembrolizumab. Accurate monitoring of these drug concentrations in biological fluids is critical for treatment efficacy. Since no method was reported for simultaneous estimation of these drugs, this study focuses on the development of a validated LC-MS/MS bioanalytical method for simultaneous quantification of Adagrasib and Pembrolizumab in rat plasma. The analytes were extracted from the biological matrix through liquid-liquid extraction techniques using acetonitrile as extraction solvent. The analytes were separated on a Waters X-bridge phenyl C18 column, with a mixture of acetonitrile: 0.1 % TFA in water (50: 50 v/v) as mobile phase at an isocratic flow rate of 1.0 mL/min with a runtime of about 5 min. Adagrasib (m/z 605.12 → 201.62), Pembrolizumab (m/z 146.32 → 85.15), and Sotorasib (m/z 561.59 → 218.92) were determined by recording the mass spectra through multiple reaction monitoring in positive mode. The method was validated according to USFDA guidelines. The results demonstrate satisfactory linearity with an r2 value of 0.9998 in the ranges of 40-800 and 10-200 ng/mL, accuracy with mean percentage recovery of 95.22-98.59 % and 96.98-98.57 %, precision indicated with %RSD ranged between 0.39-1.91 % and 0.85-9.03 % for Adagrasib and Pembrolizumab respectively, and other key parameters. The developed method can determine the pharmacokinetic parameters to indicate the efficacy and safety of the drugs, and also can quantify selected drugs simultaneously in biological samples.

A new sustainable filtration membrane extraction method based on nanoconfined liquid phase extraction: Determination of organochlorinated pesticides and pyrethroids in tea samples.

BACKGROUND: Pesticides are used in agricultural production for prevent and control crop diseases and pests, but it is easy to cause excessive pesticides residues in agricultural products, polluting the environment and endangering human health. Due to their unmatched and sustainable capabilities, nanoextraction procedures are becoming every day more important in Analytical Chemistry. In particular, nanoconfined liquid phase extraction has shown extraction capabilities toward polar, medium polar, and/or nonpolar substances, which can be easily modulated depending on the nanoconfined solvent used. Furthermore, this "green" technique showed excellent characteristics in terms of recoveries, extraction time (≤1 min), reliability, and versatility. (97) RESULTS: In this work, the advantages of this technique have been coupled with those of filtration membrane extraction, making use of carbon nanofibers (CnFs) growth on carbon microspheres (CµS). This substrate has been deposited on a filter, which combined with gas chromatographic mass spectrometry (GC-MS) analysis successfully employed for the nanoextraction of 30 pesticides (18 organochlorine and 12 pyrethroids) in tea samples. Under the optimized extraction conditions, the linear range with standard solutions was from 1 to 1000 ng mL-1 (R2 ≥ 0.99), the limit of detections in tea samples were in the range 0.56-17.98 µg kg-1. The accuracy of the developed method was evaluated by measuring the extraction recovery of the spiked tea samples, and recoveries between 74.41 % and 115.46 %. (119) SIGNIFICANCE: Considering the versatility of nanoconfined liquid phase extraction and the functionality of the filtration membrane extraction procedure, this new extraction method can be considered a powerful candidate for automatized high-throughput analyses of real samples. (34).

Optimization of Pressurized Liquid Extraction (PLE) Parameters for Extraction of Bioactive Compounds from Moringa oleifera Leaves and Bioactivity Assessment.

Moringa oleifera leaves are rich sources of bioactive compounds with potential health benefits, including antioxidants and anti-inflammatory agents. Pressurized liquid extraction (PLE) stands out as a promising technique for effectively extracting valuable compounds from natural sources. In this study, we aimed to optimize PLE parameters, such as temperature, extraction duration, and pressure, to maximize bioactive compound (polyphenols, flavonoids, and ascorbic acid) yield from M. oleifera leaves and evaluate their antioxidant and anti-inflammatory activities. According to the outcomes of this research, the maximum achieved total polyphenol content was 24.10 mg gallic acid equivalents (GAE)/g of dry weight (dw), and the total flavonoid content was increased up to 19.89 mg rutin equivalents (RtE)/g dw. Moreover, after HPLC-DAD analysis, neochlorogenic and chlorogenic acids, catechin and epicatechin, rutin, and narirutin were identified and quantified. As far as the optimum ascorbic acid content is concerned, it was found to be 4.77 mg/g dw. The antioxidant activity was evaluated by three different methods: ferric reducing antioxidant power (FRAP), the DPPH method, and the anti-hydrogen peroxide activity (AHPA) method, resulting in 124.29 µmol ascorbic acid equivalent (AAE)/g dw, 131.28 µmol AAE/g dw, and 229.38 µmol AAE/g dw values, respectively. Lastly, the albumin denaturation inhibition was found to be 37.54%. These findings underscore the potential of PLE as an efficient extraction method for preparing extracts from M. oleifera leaves with the maximum content of bioactive compounds.

Online sequential analysis of volatile and semivolatile organic compounds in water matrices by double robotic sample preparations and dual-channel mono and comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry system.

The monitoring of organic compounds in aquatic matrices poses challenges due to its complexity and time-intensive nature. To address these challenges, we introduce a novel approach utilizing a dual-channel mono (1D) and comprehensive two-dimensional (2D) gas chromatography coupled with time-of-flight mass spectrometry (GC × GC-TOFMS) system, integrated with a robotic pretreatment platform, for online monitoring of both volatile organic compounds (VOCs) and semivolatile organic compounds (SVOCs) in water matrices. Employing the robotic platform, we establish a suite of online liquid-liquid extraction (LLE) pretreatment processes for water samples, marking the first instance of such procedures. Leveraging the automatic headspace (HS) module, dual robotic preparations of HS and LLE are sequentially executed to extract VOCs and SVOCs from water matrices. The GC × GC-TOFMS system is distinguished by its dual-channel analytical column configuration, facilitating sequential analysis of VOCs in GC-TOFMS mode and SVOCs in GC × GC-TOFMS mode. Quantitative detection of 55 target VOCs and 104 SVOCs is achieved in a water sample using the instrument system. Our method demonstrates excellent correlation coefficients ranging from 0.990 to 1.000, method detection limits ranging from 0.08 to 4.78 µg L-1, relative standard deviations below 19.3 %, and recovery rates ranging from 50.0 % to 124.0 %. To validate the online monitoring capabilities of our system, we assess target SVOCs at three different concentration levels over a 3-day period. Most compounds exhibit recovery rates ranging from 70.0 % to 130.0 %. Furthermore, we apply our method to analyze a real water sample, successfully identifying over 100 target and nontarget VOCs/SVOCs, including alcohols, aldehydes, ketones, acids, esters, and phenols. These results highlight the efficacy of the proposed analysis system, capable of conducting two distinct analyses in automatic sequence, thereby enhancing the efficiency and accuracy of organic compound analysis in water matrices.

Isolation of nucleic acids using liquid-liquid phase separation of pH-sensitive elastin-like polypeptides.

Extraction of nucleic acids (NAs) is critical for many methods in molecular biology and bioanalytical chemistry. NA extraction has been extensively studied and optimized for a wide range of applications and its importance to society has significantly increased. The COVID-19 pandemic highlighted the importance of early and efficient NA testing, for which NA extraction is a critical analytical step prior to the detection by methods like polymerase chain reaction. This study explores simple, new approaches to extraction using engineered smart nanomaterials, namely NA-binding, intrinsically disordered proteins (IDPs), that undergo triggered liquid-liquid phase separation (LLPS). Two types of NA-binding IDPs are studied, both based on genetically engineered elastin-like polypeptides (ELPs), model IDPs that exhibit a lower critical solution temperature in water and can be designed to exhibit LLPS at desired temperatures in a variety of biological solutions. We show that ELP fusion proteins with natural NA-binding domains can be used to extract DNA and RNA from physiologically relevant solutions. We further show that LLPS of pH responsive ELPs that incorporate histidine in their sequences can be used for both binding, extraction and release of NAs from biological solutions, and can be used to detect SARS-CoV-2 RNA in samples from COVID-positive patients.

Highly sensitive liquid chromatography-mass spectrometry method for the quantitative analysis of mometasone furoate in human plasma: Method validation and application to clinical pharmacokinetic studies.

We report the development and the validation of a sensitive liquid chromatography-mass spectrometry (LC-MS/MS) method for mometasone furoate (MF) analysis in human plasma. Plasma samples were processed through liquid-liquid extraction and analyzed using LC-MS/MS operating in positive mode using multiple reaction monitoring of transitions m/z 520.9 â†’ 355.0 and m/z 525.8 â†’ 355.0 for MF and the internal standard (IS), respectively. Separation was achieved at 1.0 mL/min on a C18 column using a gradient elution of mobile phase of 0.05% ammonia in water (phase A) and acetonitrile (phase B). The assay range was 0.250-100 pg/mL and proved to be accurate and precise MF. Normalized recoveries were consistent and reproducible with a coefficient of variation (CV%) value of 6.0. The CV (%) of the IS normalized matrix factor was not observed in normal, lipemic, and hemolyzed plasmas. Dilutions of 1:10 were accurately quantified. A cycle of three freeze and thaw and stabilities at room temperature and on the autosampler were demonstrated. In addition, MF in the presence of indacaterol and glycopyrronium was proven to be stable at -70°C for at least 157 days. The present method was successfully applied to quantify MF in patients receiving MF, indacaterol, and glycopyrronium as a fixed-dose combination.

Multiresidue analysis of bat guano using GC-MS/MS.

Bats are the second largest mammalian order and are an endangered species group with a strong need for contamination monitoring. To facilitate non-invasive monitoring of the ecological burden in bat populations, a multiresidue method for the simultaneous quantification of 119 analytes including pesticides, persistent organic pollutants (POPs), active pharmaceutical ingredients (APIs), polycyclic aromatic hydrocarbons (PAHs), UV blockers, plasticizers, and other emerging pollutants in bat guano with gas chromatography tandem mass spectrometry (GC-MS/MS) was developed. Sample preparation and clean-up were performed with a modified QuEChERS approach based on DIN EN 15662. The method uses 1.00 g bat guano as sample with acetonitrile and water for liquid-liquid extraction. Phase separation is assisted by citrate-buffered salting out agent. For clean-up of the extract, primary secondary amine (PSA) was combined with graphitized carbon black (GCB). The lower limits of quantification (LLOQ) ranged between 2.5 and 250 µg kg-1. Linearity was shown in a concentration range from the respective LLOQs to 1250 µg kg-1. The median of the mean recovery was 102.4%. Precision was tested at three concentrations. Method and injection precision were adequate with a relative standard deviation (RSD) below 20%. Furthermore, the comparative analysis with LC-MS/MS demonstrated the reliability of the results and provided a valuable extension of the analytical scope. As proof of concept, three guano samples from a German nursery roost of Myotis myotis were analysed. The results show a time-dependent change in contaminant concentration, highlighting the strong need for non-invasive contamination monitoring of whole bat populations.

In-situ acetylation followed by liquid-liquid extraction and gas chromatography - mass spectrometry for the determination of bromophenols in urine.

A novel and simple method combining in-situ acetylation, liquid-liquid extraction and gas chromatography-mass spectrometry (GC-MS) has been developed for the quantification of 10 bromophenols in urine, used as biomarkers of exposure to polybrominated diphenyl ethers. The analytical process involves an enzymatic hydrolysis of the bromophenol glucuronide fraction followed by an aqueous derivatization of the phenol group with acetic anhydride. A subsequent liquid-liquid extraction of the sample with hexane allows the injection of the organic layer, using a programmed temperature vaporizer, into a gas chromatograph coupled to a single quadrupole mass spectrometer. Quantification is performed by the standard addition method. Limits of detection are in the pg mL-1 range. Trueness, assessed in terms of percentages of recovery, varies between 100 % and 118 % in synthetic urine and between 79 % and 117 % in human urine. Precision, assessed at two different levels, 0.25 ng mL-1 and 2.5 ng mL-1, shows values of relative standard deviation below 14 % both in intra- and inter-day studies for both matrices. The method has been applied to the analysis of seven urine samples, measuring concentrations higher than the LOQ in three of them. These levels are in agreement with others found in literature, but they have been obtained by applying a much simpler and faster protocol. In addition, the replacement of silylating reagents by acetic anhydride, to derivatize the phenol moiety, provides a greener alternative to other GC-MS procedures published up to date.

Evaluation of Iron Chlorin e6 disappearance and hydrolysis in soil and garlic using salting-out assisted liquid-liquid extraction coupled with high-performance liquid chromatography and ultraviolet-visible detection.

Iron Chlorin e6 (ICE6), a star plant growth regulator (PGR) with independent intellectual property rights in China, has demonstrated its efficacy through numerous field experiments. We innovatively employed salting-out assisted liquid-liquid extraction (SALLE) with HPLC-UV/Vis to detect ICE6 residues in water, soil, garlic seeds, and sprouts. Using methanol and a C18 column with acetonitrile: 0.1% phosphoric acid mobile phase (55:45, v:v), we achieved a low LOQ of 0.43 to 0.77 µg kg-1. Calibration curves showed strong linearity (R2 > 0.992) within 0.01 to 5.00 mg kg-1. Inter-day and intra-day recoveries (0.05 to 0.50 mg kg-1) demonstrated high sensitivity and accuracy (recoveries: 75.36% to 107.86%; RSD: 1.03% to 8.78%). Additionally, density functional theory (DFT) analysis aligned UV/Vis spectra and indicated ICE6's first-order degradation (2.03 to 4.94 days) under various environmental conditions, mainly driven by abiotic degradation. This study enhances understanding of ICE6's environmental behavior, aids in risk assessment, and guides responsible use in agroecosystems.

Conveniently monitoring aldehyde changes in heated edible oils using miniaturized kapok fiber-supported liquid-phase extraction/in-situ derivatization coupled with liquid chromatography-tandem mass spectrometry.

Heating edible oils generates aldehydes, potentially leading to adverse health effects, making their analysis essential for quality control. This study presents a convenient miniaturized kapok fiber-supported liquid-phase extraction/in-situ derivatization method for the simultaneous extraction and derivatization of aldehydes in oils. The method involves placing 150 mg oil into a 1 mL pipette tip packed with 25 mg kapok fiber, adding 150 µL ACN with 1.5 mg mL-1 DNPH, and post 30-minute static extraction, retrieving the extractant with a pipettor for liquid chromatography-tandem mass spectrometry analysis. By optimizing critical parameters through a Box-Behnken design, the method exhibits good linearity (1-500 ng g-1, R2 ≥ 0.991), low detection limits (0.2-1.0 ng g-1), excellent accuracy (95.3-107.1%) and high precisions (relative standard deviation < 7.9%). This method simplifies sample preparation processes, cuts solvent use, and facilitates automation. It effectively identifies ten aldehyde variations in six heated oils, displaying distinct profiles consistent with prior research.

A salting-out assisted liquid-liquid extraction method for 25 emerging pesticides in follicular fluid.

Emerging pesticides of neonicotinoids (NEOs) and "Universal Pesticides" (UPs) are a growing global concern due to their growing commercial importance and potential risks to human health. The currently available analytical methods for these pesticides in biomonitoring were usually tailored for limited number of analytes, or were time consuming and costly. In this study, an efficient and sensitive method for the analysis of 16 NEOs and nine UPs in human follicular fluid (FF) was developed by using a salting-out assisted liquid-liquid extraction (SALLE) method and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Method performance was evaluated by calibration linearity (r > 0.99), sensitivity at limits of quantification (0.01-0.50 ng/mL), accuracy at relative recoveries (81-117%) and precision at relative standard deviations (≤16%). The developed method was further validated by analyzing 21 human FF samples that were collected from a hospital in Guangzhou, China. Among the 25 study analytes, two NEOs and six UPs had their detection rates over 85% and medians at 0.048-0.808 ng/mL in the FF samples. Considering the well-known toxicity of these pesticides and their metabolites, it is urgent to figure out exposure profiles of study pesticides and potential reproductive risk for women. To the best of our knowledge, this study is the first to develop and apply the SALLE method in the extraction of 16 NEOs and nine UPs simultaneously in human FF.

Lab-in-syringe automated protein precipitation and salting-out homogenous liquid-liquid extraction coupled online to UHPLC-MS/MS for the determination of beta-blockers in serum.

A sample preparation method involving tandem implementation of protein precipitation and salting-out homogenous liquid-liquid extraction was developed for the determination of beta-blockers in serum. The entire procedure was automated using a computer-controlled syringe pump following the Lab-In-Syringe approach. It is based on the denaturation of serum proteins with acetonitrile followed by salt-induced phase separation upon which the proteins accumulate as a compact layer at the interphase of the solutions. The extract is then separated and diluted in-syringe before being submitted to online coupled UHPLC-MS/MS. A 1 mL glass syringe containing a small stir bar for solution mixing at up to 3000 rpm, was used to deal with sample volumes as small as 100 µL. A sample throughput of 7 h-1 was achieved by performing the chromatographic run and sample preparation procedure in parallel. Linear working ranges were obtained for all analytes between 5 and 100 ng mL-1, with LOD values ranging from 0.4 to 1.5 ng mL-1. Accuracy values in the range of 88.2-106% and high precision of <11% RSD suggest applicability for routine analysis that can be further improved using deuterated standards.

Development of an Efficient Extraction Methodology to Analyse Potential Inflammatory Biomarkers from Sebum.

INTRODUCTION: Proteins, such as cytokines and chemokines, are present in varying concentrations in a range of biofluids, with an important signalling role in maintaining homeostasis. Commercial tapes have been employed to non-invasively collect these potential biomarkers in sebum from the skin surface to examine their concentrations in conditions including acne, atopic dermatitis, and pressure ulcers. However, the identification of robust biomarker candidates is limited by the low abundance of specific proteins extracted by current methodologies. Therefore, this study was designed to develop an optimized extraction method for potential inflammatory biomarkers in sebum collected with Sebutapes. METHODS: Commercial tapes (Sebutapes) coated with synthetic sebum were used to systematically evaluate the effects of chemical and mechanical stimuli on extraction efficiency. Varying concentrations of high- and low-abundance biomarkers (IL-1α, IL-6, IL-8, INF-γ, TNF-α, and IL-1RA) were used to spike the synthetic sebum samples. Methodological variables included different surfactants, mechanical stimuli, and buffer volume. Extraction efficiency was estimated using immunoassay kits from the extracted buffer. RESULTS: The results revealed that the use of a surfactant, i.e., ß-dodecyl maltoside, in addition to the mechanical stimuli, namely, sonication and centrifugation, resulted in an increased recovery of cytokines, ranging from 80% for high-abundant cytokines, such as IL-1α and IL-1RA, and up to 50% for low-abundance cytokines, including TNF-α, IL-6 and IL-8. Compared to previous methods, the new extraction protocol resulted in between a 1.5-2.0-fold increase in extraction efficiency. CONCLUSION: The study revealed that there was a high degree of variability in the extraction efficiency of different cytokines. However, improved efficiency was achieved across all cytokines with selective surfactants and mechanical stimuli. The optimised protocol will provide means to detect low levels of potential biomarkers from skin surface, enabling the evaluation of local changes in pro- and anti-inflammatory cytokines present in different skin conditions.

High-throughput salting-out assisted liquid-liquid extraction using a 3D printed device and its application in the quantification of ibrutinib and its metabolite PCI-45227 in human serum.

Liquid-liquid extraction methods are widely used for sample treatment in bioanalysis, although their implementation poses a common speed-limiting step in the analytical process when fast separation and detection methods such as UHPLC-MS are used. This study aimed to develop high-throughput salting-out assisted liquid-liquid extraction on a 96-well plate in combination with fast LC-MS analysis of ibrutinib and its active metabolite PCI-45227 (dihydrodiol ibrutinib) in human serum. A specially designed 3D printed extraction device developed in our laboratory allowed for the precise and rapid collection of the organic phase from the 96-well plate using a multichannel pipette, without the risk of aspiration of the bottom aqueous layer. The application of this device significantly accelerated sample preparation and allowed the processing of up to 96 samples in 1 h. The method was successfully validated according to EMA guidelines in the concentration range of 0.1-200 ng/mL for both analytes, providing lower limit of quantification at 100 pg/mL. The intra-day accuracy for IBT was in the range of - 1.67-5.67 %, while the inter-day accuracy was in the range of 0.20-6.90 %. The intra-day precision for IBT was in the range of 3.20-4.37 % and 3.13-4.73 % for the inter-day measurement. PCI-45227 showed intra-day accuracy in the range of - 11.2-3.71 % and the inter-day accuracy in the range of - 5.76-0.92 %. The intra-day precision for PCI was in the range of 3.49-7.64 % and 3.63-8.61 % for the measurement between days. In addition to increasing the speed of sample preparation, this method also offers low consumption of the sample and extraction solvent and can be utilized for other similar small-volume in-well plate extractions where organic solvents of lower density than water are used. The method was successfully applied to the analysis of serum samples (n = 5) of patients with chronic lymphoblastic leukaemia at the trough level (ibrutinib concentration range: 1.63-3.78 ng/mL, PCI-45227 concentration range: 1.84-14.02 ng/mL) and 2 h postdose (ibrutinib concentration range: 7.34-89.0 ng/mL, PCI-45227 concentration range: 5.64-124 ng/mL).

Development of salting-out extraction methodology for the determination of piroxicam from polymeric based nanocarriers and biological samples.

The aim of the present study is to develop the polymeric nanoparticulate drug delivery systems of piroxicam and to evaluate the in-vitro characteristics such as entrapment efficiency, surface morphology, in-vitro drug release performance, etc. For this reason, a novel HPLC methodology was developed for the determination of piroxicam from its bulk form, pharmaceutical preparation, and nanoparticulate delivery systems. Furthermore, the developed formulation was applied to the rats and the biological samples (plasma, liver, heart, spleen, kidney, and lung homogenates) were analyzed by the developed HPLC method following a salting-out assisted liquid-liquid extraction strategy for the first time in the literature. A Kinetex C18 analytical column (150 mm × 4.6 mm i.d., 5 µm) was used as a stationary phase with a 0.8 mL/min flow rate of acetonitrile: phosphate buffer (40:60, v/v), the column oven was adjusted to 40 °C and detection wavelength is set to 360 nm. Developed method were validated as per selectivity, linearity, LOD, LOQ, precision, and accuracy specified in the International Council for Harmonisation guidelines. As a result of the present study, it has been shown that the analysis of piroxicam from the bulk form, pharmaceutical preparation, developed polymeric-based drug delivery system, and biological samples can be successfully performed and no interferences were observed in any matrix. The developed method was also successfully utilized to study the tissue distribution of piroxicam in rats.

Chemometric optimization of salting-out assisted liquid-liquid extraction (SALLE) combined with LC-MS/MS for the analysis of carvedilol enantiomers in human plasma: Application to clinical pharmacokinetics.

Carvedilol is a commonly used antihypertensive whose oral absorption is limited by low solubility and significant first-pass metabolism. This work aimed to apply chemometrics for the optimization of a salting-out assisted liquid-liquid extraction (SALLE) combined with LC-MS/MS to analyze carvedilol enantiomers in plasma samples. Method development and validation were driven for application in pharmacokinetic studies. Parameters that influence the efficiency of SALLE were evaluated using a fractional factorial 24-1 design with 4 factors and a central composite design was used to evaluate the optimal extraction condition. Carvedilol enantiomers and the internal standard lidocaine were separated on an Astec® Chirobiotic® V column and a mixture of methanol:ethanol (90:10, v/v) with 0.02% diethylamine and 0.18% acetic acid as mobile phase. The positive ion mode on electrospray ionization was used to monitor the transitions of m/z 407 > 100 and 235 > 86 for carvedilol enantiomers and lidocaine, respectively. Acetonitrile and ammonium acetate solution were selected for sample preparation by SALLE. Surface graphs and the desirability test were used to define the optimized SALLE conditions which resulted in 93% recovery for both carvedilol enantiomers. The method was linear in the range of 0.5 to 100 ng/mL in plasma, with a lower limit of quantification of 0.5 ng/mL. Within-run and between-run precision (as the relative standard deviation) were all < 9.74% and accuracy (as relative error) did not exceed ± 10.30%. Residual effect and matrix effect were not observed. Carvedilol enantiomers were stable in plasma under the storage, preparation, and analysis conditions. The validated method was successfully applied to analyze carvedilol in plasma samples from patients previously submitted to a Roux-en-Y gastric bypass surgery treated with a single oral dose of 25 mg racemic-carvedilol. Higher plasma concentrations were observed for (R)-(+)-carvedilol when compared to (S)-(-)-carvedilol in two patients post-bariatric surgery.

Phosphorus Removal and Phytonutrients Retention in the Refining of Solvent Extracted Palm-Pressed Mesocarp Fiber Oil.

Phosphoric acid is used in the refining of palm oil for the removal of phosphatides. The high concentration of phosphorus in solvent extracted palm-pressed mesocarp fiber oil hinders palm oil mills to recover this phytonutrients-rich residual oil in pressed fiber which typically contains 0.1 to 0.2% of total oil yield. This study aimed to refine the palm-pressed mesocarp fiber oil and determine the optimum dosage of phosphoric acid for acid-degumming of palm-pressed mesocarp fiber oil while retaining its phytonutrients. The refining process was carried out with combination of wet degumming, acid degumming, neutralisation, bleaching and deodorization. The optimum dose of phosphoric acid was identified as 0.05 wt.% by incorporating the wet degumming process. The refined palm-pressed mesocarp fiber oil showed a reduction in phosphorus content by 97% (from 901 ppm to 20 ppm) and 97% free fatty acid content removal (from 6.36% to 0.17%), while the Deterioration of Bleachability Index increased from 1.76 to 2.48, which showed an increment of 41%. The refined oil retained the key phytonutrients such as carotenoids (1,150 ppm) and vitamin E (1,540 ppm) that can be further developed into high-value products. The oil meets the quality specification of refined, bleached, and deodorized palm oil while preserving the heat-sensitive phytonutrients, which in turn provides a new resource of nutritious oil.

Optimization of the Extraction of Proanthocyanidins from Grape Seeds Using Ultrasonication-Assisted Aqueous Ethanol and Evaluation of Anti-Steatosis Activity In Vitro.

Conventional extraction methods of proanthocyanidins (PAC) are based on toxic organic solvents, which can raise concerns about the use of extracts in supplemented food and nutraceuticals. Thus, a PAC extraction method was developed for grape seeds (GS) and grape seed powder using food-grade ethanol by optimizing the extraction conditions to generate the maximum yield of PAC. Extraction parameters, % ethanol, solvent: solid (s:s) ratio, sonication time, and temperature were optimized by the central composite design of the response surface method. The yields of PAC under different extraction conditions were quantified by the methylcellulose precipitable tannin assay. The final optimum conditions were 47% ethanol, 10:1 s:s ratio (v:w), 53 min sonication time, and 60 °C extraction temperature. High-performance liquid chromatography analysis revealed the presence of catechin, procyanidin B2, oligomeric and polymeric PAC in the grape seed-proanthocyanidin extracts (GS-PAC). GS-PAC significantly reduced reactive oxygen species and lipid accumulation in the palmitic-acid-induced mouse hepatocytes (AML12) model of steatosis. About 50% of the PAC of the GS was found to be retained in the by-product of wine fermentation. Therefore, the developed ethanol-based extraction method is suitable to produce PAC-rich functional ingredients from grape by-products to be used in supplemented food and nutraceuticals.