RESUMEN
The present study investigated the impact of filtration, creaming and pasteurization on the authentication of the botanical origin of honey using the dilute-and-shoot method in liquid chromatography coupled to mass spectrometry (LC-MS). The analytical method performances were satisfactory (analyte recoveries ranging from 95 % to 103 % and inter-day precision below 12 %). Three types of raw honeys including blueberry, canola and clover were processed under controlled conditions. Filtration, creaming and pasteurization had no impact on honey botanical classification based on the LC-MS fingerprint, and the key molecular fingerprints were retained after processing. However, results revealed that testing the impact of processing is essential when selecting honey authenticity markers because some candidates (e.g. adenosine) are not stable or can be removed during honey processing. The results of the present study also highlighted the suitability of the dilute-and-shoot approach to both develop authentication tools for honey and study the impact of processing methods on specific chemicals in honeys.
Asunto(s)
Filtración , Manipulación de Alimentos , Miel , Pasteurización , Miel/análisis , Miel/clasificación , Pasteurización/métodos , Cromatografía Liquida/métodos , Manipulación de Alimentos/métodos , Espectrometría de Masas/métodos , Contaminación de Alimentos/análisisRESUMEN
With widespread occurrence and increasing concern of emerging contaminants (CECs) in source water, biologically active filters (BAF) have been gaining acceptance in water treatment. Both BAFs and graphene oxide (GO) have been shown to be effective in treating CECs. However, studies to date have not addressed interactions between GO and microbial communities in water treatment processes such as BAFs. Therefore, in the present study, we investigated the effect of GO on the properties and microbial growth rate in a BAF system. Synthesized GO was characterized with a number of tools, including scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Raman spectrometry. GO exhibited the characteristic surface functional groups (i.e., C-OH, C=O, C-O-C, and COOH), crystalline structure, and sheet-like morphology. To address the potential toxicity of GO on the microbial community, reactive oxygen species (ROS) generation was measured using nitro blue tetrazolium (NBT) assay. Results revealed that during the exponential growth phase, ROS generation was not observed in the presence of GO compared to the control batch. In fact, the adenosine triphosphate (ATP) concentrations increased in the presence of GO (25 µg/L - 1000 µg/L) compared to the control without GO. The growth rate in systems with GO exceeded the control by 20 % to 46 %. SEM images showed that GO sheets can form an effective scaffold to promote bacterial adhesion, proliferation, and biofilm formation, demonstrating its biocompatibility. Next-generation sequencing (Illumina MiSeq) was used to characterize the BAF microbial community, and high-throughput sequencing analysis confirmed the greater richness and more diverse microbial communities compared to systems without GO. This study is the first to report the effect of GO on the microbial community of BAF from a water treatment plant, which provides new insights into the potential of utilizing a bio-optimized BAF for advanced and sustainable water treatment or reuse strategies.
Asunto(s)
Grafito , Purificación del Agua , Grafito/química , Purificación del Agua/métodos , Filtración , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
In areas affected by arsenicosis, zerovalent iron (ZVI)/sand filters are extensively used by households to treat groundwater, but ZVI surface passivation and filter clogging limit their arsenic (As) removal performance. Here we present a magnetic confinement-enabled column reactor coupled with periodic ultrasonic depassivation (MCCR-PUD), which efficiently and sustainably removes As by reaction with continuously generated iron (oxyhydr)oxides from ZVI oxidative corrosion. In the MCCR, ZVI microparticles self-assemble into stable millimeter-scale wires in forest-like arrays in a parallel magnetic field (0.42-0.48 T, produced by two parallel permanent magnets), forming a highly porous structure (87 % porosity) with twice the accessible reactive surface area of a ZVI/sand mixture. For a feed concentration of 100 µg/L As(III), the MCCR-PUD, with a short empty bed contact time (1.6 min), treated ca. 7340 empty bed volume (EBV) of water at breakthrough (10 µg/L), 9.4 folds higher than that of a ZVI/sand filter. Due to the large interspace between ZVI wires, the MCCR-PUD effectively prevented column clogging that occurred in the ZVI/sand filter. The high water treatment capacity was attributed to the much enhanced ZVI reactivity in the magnetic field, sustained through rejuvenation by PUD. Furthermore, most of As was structurally incorporated into the produced iron (oxyhydr)oxides (mostly ferrihydrite) in the MCCR-PUD, as revealed by Mössbauer spectroscopy, X-ray absorption spectroscopy, and sequential extraction experiments. This finding evinced a different mechanism from the surface adsorption in the ZVI/sand filter. The structural incorporation of As also resulted in much less As remobilization from the produced corrosion products during aging in water, in total â¼1 % in 28 days. Furthermore, the MCCR-PUD exihibted robust performance when treating complex synthetic groundwater containing natural organic matter and common ions (â¼3700 EBV at breakthrough). Taken together, our study demonstrates the potential of the magnetic confinement-enabled ZVI reactor as a promising decentralized As treatment platform.
Asunto(s)
Arsénico , Hierro , Contaminantes Químicos del Agua , Purificación del Agua , Arsénico/química , Purificación del Agua/métodos , Hierro/química , Contaminantes Químicos del Agua/química , Agua Subterránea/química , FiltraciónRESUMEN
Small extracellular vesicles (sEVs) are proven to hold great promise for diverse therapeutic and diagnostic applications. However, batch preparation of sEVs with high purity and bioactivity is a prerequisite for their clinical translations. Herein, we present an electric field assisted tangential flow filtration system (E-TFF), which integrates size-based filtration with electrophoretic migration-based separation to synergistically achieve the isolation of high-quality sEVs from cell culture medium. Compared with the gold-standard ultracentrifugation (UC) method, E-TFF not only improved the purity of sEVs by 1.4 times but also increased the yield of sEVs by 15.8 times. Additionally, the entire isolation process of E-TFF was completed within 1 h, about one-fourth of the time taken by UC. Furthermore, the biological activity of sEVs isolated by E-TFF was verified by co-incubation of sEVs derived from human umbilical cord mesenchymal stem cells (hUCMSCs) with HT22 mouse hippocampal neuronal cells exposed to amyloid-ß (Aß). The results demonstrated that the sEVs isolated by E-TFF exhibited a significant neuroprotective effect. Overall, the E-TFF platform provides a promising and robust strategy for batch preparation of high-quality sEVs, opening up a broad range of opportunities for cell-free therapy and precision medicine.
Asunto(s)
Vesículas Extracelulares , Filtración , Vesículas Extracelulares/química , Vesículas Extracelulares/metabolismo , Animales , Ratones , Humanos , Filtración/instrumentación , Filtración/métodos , Células Madre Mesenquimatosas/citología , Medios de Cultivo/química , Péptidos beta-Amiloides/metabolismo , Línea CelularRESUMEN
Although the isolation and counting of small extracellular vesicles (sEVs) are essential steps in sEV research, an integrated method with scalability and efficiency has not been developed. Here, we present a scalable and ready-to-use extracellular vesicle (EV) isolation and counting system (EVics) that simultaneously allows isolation and counting in one system. This novel system consists of (i) EVi, a simultaneous tandem tangential flow filtration (TFF)-based EV isolation component by applying two different pore-size TFF filters, and (ii) EVc, an EV counting component using light scattering that captures a large field-of-view (FOV). EVi efficiently isolated 50-200 nm-size sEVs from 15 µL to 2 L samples, outperforming the current state-of-the-art devices in purity and speed. EVc with a large FOV efficiently counted isolated sEVs. EVics enabled early observations of sEV secretion in various cell lines and reduced the cost of evaluating the inhibitory effect of sEV inhibitors by 20-fold. Using EVics, sEVs concentrations and sEV PD-L1 were monitored in a 23-day cancer mouse model, and 160 clinical samples were prepared and successfully applied to diagnosis. These results demonstrate that EVics could become an innovative system for novel findings in basic and applied studies in sEV research.
Asunto(s)
Vesículas Extracelulares , Filtración , Vesículas Extracelulares/metabolismo , Animales , Ratones , Humanos , Filtración/métodos , Filtración/instrumentación , Línea Celular Tumoral , Dispersión de Radiación , LuzRESUMEN
In the sludge dewatering process, a formidable challenge arises due to the robust interactions between extracellular polymeric substances (EPS) and bound water. This study introduces a novel, synergistic conditioning method that combines iron (Fe2+)/peroxymonosulfate (PMS) and polyacrylamide (PAM) to significantly enhance sludge dewatering efficiency. The application of the Fe2+/PMS-PAM conditioning method led to a substantial reduction in specific filtration resistance (SFR) by 82.75% and capillary suction time (CST) by 80.44%, marking a considerable improvement in dewatering performance. Comprehensive analyses revealed that pre-oxidation with Fe2+/PMS in the Fe2+/PMS-PAM process effectively degraded EPS, facilitating the release of bound water. Subsequently, PAM enhanced the flocculation of fine sludge particles resulting from the advanced oxidation processes (AOPs). Furthermore, analysis based on the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory demonstrated shifts in interaction energies, highlighting the breakdown of energy barriers within the sludge and a transition in surface characteristics from hydrophilic (3.79 mJ m-2) to hydrophobic (-61.86 mJ m-2). This shift promoted the spontaneous aggregation of sludge particles. The innovative use of the Flory-Huggins theory provided insights into the sludge filtration mechanism from a chemical potential perspective, linking these changes to SFR. The introduction of Fe2+/PMS-PAM conditioning disrupted the uniformity of the EPS-formed gel layer, significantly reducing the chemical potential difference between the permeate and the water in the gel layer, leading to a lower SFR and enhanced dewatering performance. This thermodynamic approach significantly enhances our understanding of sludge dewatering and conditioning. These findings represent a paradigm shift, offering innovative strategies for sludge treatment and expanding our comprehension of dewatering and conditioning techniques.
Asunto(s)
Resinas Acrílicas , Hierro , Aguas del Alcantarillado , Eliminación de Residuos Líquidos , Aguas del Alcantarillado/química , Hierro/química , Resinas Acrílicas/química , Eliminación de Residuos Líquidos/métodos , Floculación , Peróxidos/química , Oxidación-Reducción , FiltraciónRESUMEN
BACKGROUND: The demand for bioplastics has increased exponentially as they have emerged as alternatives to petrochemical plastics. However, there is a substantial lack of knowledge regarding bioplastic degradation. This study developed a novel pretreatment method to improve the accessibility of a bioplastic substrate for biodegradation. In this study, cellulose acetate, a bioplastic found in the world's most littered waste, e.g. cigarette filters, was selected as a potential substrate. Before anaerobic digestion, three thermal alkaline pretreatments: TA 30 °C, TA 90 °C, and TA 121 °C, were used to evaluate their effects on the chemical alterations of cellulose acetate. RESULT: The ester groups in cellulose acetate were significantly reduced by the TA 30 °C pretreatment, as seen by a decrease in C = O stretching vibrations and shortening of C - O stretches (1,270 â¼ 1,210 cm- 1), indicating effective removal of acetyl groups. This pretreatment significantly enhanced cellulose acetate biodegradability to a maximum of 91%, surpassing the previously reported cellulose acetate degradation. Methane production increased to 695.0 ± 4 mL/g of volatile solid after TA 30 °C pretreatment, indicating enhanced cellulose acetate accessibility to microorganisms, which resulted in superior biogas production compared to the control (306.0 ± 10 mL/g of volatile solid). Diverse microbes in the anaerobic digestion system included hydrolytic (AB240379_g, Acetomicrobium, FN436103_g, etc.), fermentative, and volatile fatty acids degrading bacteria (JF417922_g, AB274492_g, Coprothermobacter, etc.), with Methanobacterium and Methanothermobacter being the sole hydrogenotrophic methanogens in the anaerobic digestion system. Additionally, an attempt to predict the pathway for the effective degradation of cellulose acetate from the microbial community in different pretreatment conditions. CONCLUSIONS: To the best of our knowledge, this is the first study to estimate the maximum cellulose acetate degradation rate, with a simple and cost-effective pretreatment procedure. This approach holds promise for mitigating the environmental impact of cellulose acetate of cigarette filters and presents a sustainable and economically viable waste management strategy.
Asunto(s)
Biodegradación Ambiental , Celulosa , Celulosa/metabolismo , Celulosa/análogos & derivados , Metano/metabolismo , Anaerobiosis , Biocombustibles , Productos de Tabaco , Bacterias/metabolismo , Temperatura , FiltraciónRESUMEN
In this work, we aim to investigate and compare the combustion reactivities of real biofuel soot and fossil-fuel soot in the active and passive regeneration conditions of DPF and GPF through temperature-programmed oxidation (TPO). Higher reactivity of biofuel soot is achieved even under GPF conditions with extremely low oxygen concentration (~ 1%), which provides a great potential for low-temperature regeneration of GPF. Such a result is mainly attributed to the low graphitization and less surface C = C groups of biofuel soot. Unfortunately, the presence of high-content ashes (~ 47%) and P impurity in real biofuel soot hinder its combustion reactivity. TPO evidences that the O2/NOX-lacking conditions in GPF are key factors to impact the combustion of soot, especially fossil-fuel soot. This work provides some useful information for understanding real biofuel and fossil-fuel soot combustion in GPF and DPF regeneration and further improvement in filter regeneration process.
Asunto(s)
Biocombustibles , Combustibles Fósiles , Gasolina , Hollín , Oxígeno , FiltraciónRESUMEN
Volatile organic compounds (VOCs) emitted into the atmosphere negatively affect the environment and human health. Biotrickling filtration, an effective technology for treating VOC-laden waste gases, faces challenges in removing hydrophobic VOCs due to their low water solubility and therefore limited bioavailability to microorganisms. Consequently, the addition of (bio)surfactants has proven to be a promising strategy to enhance the removal of hydrophobic VOCs in biotrickling filters (BTFs). Yet, up to now, no single study has ever performed a mass transfer characterization of a BTF under (bio)surfactants addition. In this study, the effect of (bio)surfactant addition on the gas-liquid mass transfer characteristics of two BTFs was measured by using oxygen (O2) as a model gas. Through an empirical correlation, the mass transfer coefficients (kLa) of two hydrophobic VOCs, toluene and hexane, which are of industrial and environmental significance, were estimated. One BTF was filled with expanded perlite, while the other with a mixture of compost and wood chips (C + WC). Both BTFs were operated under different liquid velocities (UL: 0.95 and 1.53 m h-1). Saponin, a biological surfactant, and Tween 80, a synthetic surfactant, were added to the recirculating liquid at different critical micelle concentrations (CMCs: 0-3 CMC). The higher interfacial and surface area of the perlite BTF compared to the C + WC BTF led to higher kLaO2 values regardless of the operational condition: 308 ± 18-612 ± 19 h-1 versus 42 ± 4-177 ± 24 h-1, respectively. Saponin addition at 0.5 and 1 CMC had positive effects on the perlite BTF, with kLaO2 values two times higher compared to those at 0 CMC. Tween 80 exhibited a neutral or slightly positive effect on the mass transfer of both BTFs under all conditions. Overall, the CMC, along with the physical characteristics of the packing materials and the operational conditions evaluated explained the results obtained. This study provides fundamental data essential to improve the performance and design of BTFs for hydrophobic VOCs abatement.
Asunto(s)
Contaminación del Aire , Filtración , Tensoactivos , Compuestos Orgánicos Volátiles , Tensoactivos/química , Contaminación del Aire/prevención & control , Contaminantes AtmosféricosRESUMEN
Anaerobically-treated palm oil mill effluent (POME) still has unacceptable properties for water recycling and reuse, with an unpleasant appearance due to the brownish color caused by tannins and phenolic compounds. This study proposes an approach for treating anaerobically-treated POME for water recycling by combining organic precipitation, electrocoagulation (EC), and ion-exchange resin, followed by reverse osmosis (RO) membrane filtration in series. The results indicated that the organic precipitation enhanced the efficiency of EC treatment in reducing the concentrations of tannins, color, and chemical oxygen demand (COD) of the anaerobically-treated POME effluent, with reductions of 95.73%, 96.31%, and 93.96% for tannin, color, and COD, respectively. Moreover, organic precipitation affected the effectiveness of Ca2+ and Mg2+ ion removal using ion exchange resin and RO membrane filtration. Without prior organic precipitation, the ion-exchange resin process required a longer contact time, and the RO membrane filtration treatment was hardly effective in removing total dissolved solids (TDS). The combined process gave a water quality that meets the criteria set by the Thailand Ministry of Industry for industrial boiler use (COD 88 mg/L, TDS <0.001 mg/L, water hardness <5 mg-CaCO3/L, and pH 6.9).
Asunto(s)
Filtración , Resinas de Intercambio Iónico , Ósmosis , Aceite de Palma , Eliminación de Residuos Líquidos , Aceite de Palma/química , Filtración/métodos , Resinas de Intercambio Iónico/química , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/análisis , Membranas Artificiales , Purificación del Agua/métodos , Electrocoagulación/métodos , Anaerobiosis , Residuos Industriales/análisis , Análisis de la Demanda Biológica de Oxígeno , Taninos/química , Taninos/análisis , Precipitación Química , Aguas Residuales/químicaRESUMEN
Quenching digestions in proteomics prior to analysis is routine in order to eliminate residual protease activity. Residual activity leads to overdigestion, nonspecific star-activity, and back-exchange in isotopic 18O quantitation. Chemical and isobaric labeling (e.g., TMT/iTRAQ) of proteins or peptides for mass spectrometry-based proteomics is generally incompatible with ubiquitous postdigestion acidification. This necessitates buffer exchange and pH adjustments. We demonstrate that quenching is unnecessary with peptides generated from protein filter-traps, as trypsin activity and intact trypsin are negligible in the eluate from these preparations. Labeling can be directly performed on enzymatic digests from these methods, improving recovery, throughput, and ease of automation.
Asunto(s)
Proteómica , Tripsina , Tripsina/metabolismo , Tripsina/química , Proteómica/métodos , Marcaje Isotópico/métodos , Filtración , Fragmentos de Péptidos/análisis , Fragmentos de Péptidos/química , Fragmentos de Péptidos/metabolismo , Espectrometría de Masas/métodos , Humanos , Concentración de Iones de Hidrógeno , Animales , Péptidos/química , Péptidos/análisisRESUMEN
In this study, pomegranate seed waste (PSW) was added into sand filter (SF) to increase removal efficiency of Lead (Pb(II)) and Copper (Cu(II)) from polluted water. The performance of PSW was compared with activated carbon (AC) as a typical adsorbent. Based on the SEM, EDX, FTIR, XRD, BET and proximate analyses, PSW had porous structure with specific surface area of 2.76 m2/g and active compounds which suggested PSW as an appropriate adsorbent for heavy metals (HMs) adsorption. According to the batch experiments, SF without treatment could only remove 46% and 35% of Pb(II) and Cu(II), respectively. These numbers increased to 88% and 75% for Pb(II) and Cu(II) by adding 3 g/kg PSW to the SF, respectively under the optimal conditions of HMs initial concentrations = 100 mg/L, pH = 7 and contact time = 60 min. The adsorption kinetic and isotherm followed the pseudo-first-order and Langmuir models, respectively indicating that mainly physisorption was involved in the HMs adsorption process of PSW. Based on the column experiments (flow rate = 62.5 mL/min), the Pb(II) and Cu(II) removal increased from 14% to 60% and 10%-55%, respectively after 5 pore volumes (40 min) by adding 3 g/kg PSW to the SF. Breakthrough curves matched better with Thomas mode rather than Adam's Bohart proving Langmuir adsorption isotherm. Our finding suggested modification of SF with PSW is a promising approach for efficient removal of HMs from water.
Asunto(s)
Cobre , Filtración , Plomo , Contaminantes Químicos del Agua , Purificación del Agua , Adsorción , Cobre/química , Cobre/aislamiento & purificación , Plomo/química , Plomo/aislamiento & purificación , Cinética , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Filtración/métodos , Purificación del Agua/métodos , Arena/química , Granada (Fruta)/química , Semillas/químicaRESUMEN
With the increasing demand of recycling disposal of industrial wastewater, oil-in-water (O/W) emulsion has been paid much attention in recent years owing to its high oil content. However, due to the presence of surfactant and salt, the emulsion was usually stable with complex physicochemical interfacial properties leading to increased processing difficulty. Herein, a novel flow-through electrode-based demulsification reactor (FEDR) was well designed for the treatment of saline O/W emulsion. In contrast to 53.7% for electrical demulsification only and 80.3% for filtration only, the COD removal efficiency increased to 92.8% under FEDR system. Moreover, the pore size of electrode and the applied voltage were two key factors that governed the FEDR demulsification performance. By observing the morphology of oil droplets deposited layer after different operation conditions and the behavior of oil droplets at the electrode surface under different voltage conditions, the mechanism was proposed that the oil droplets first accumulated on the surface of flow-through electrode by sieving effect, subsequently the gathered oil droplets could further coalesce with the promoting effect of the anode, leading to a high-performing demulsification. This study offers an attractive option of using flow-through electrode to accomplish the oil recovery with simultaneous water purification.
Asunto(s)
Electrodos , Filtración , Eliminación de Residuos Líquidos , Purificación del Agua , Purificación del Agua/métodos , Filtración/métodos , Eliminación de Residuos Líquidos/métodos , Aceites/química , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Emulsiones/química , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentaciónRESUMEN
Pyrogens, classified as bacterial endotoxins and non-endotoxin pyrogens (NEPs), induce fever or shock when released into the bloodstream or spinal fluid. Recently, a monocyte-activation test (MAT) involving human cell culture has been developed to detect pyrogens in injectable products. To evaluate the sensitivity of MAT, a reference standard endotoxin was used as a positive control; however, the reactivity differed between the endotoxins and NEPs, necessitating positive controls for NEPs. This study aimed to explore a preparation method for heat-killed Staphylococcus aureus (HKSA) as a positive control for NEPs in MAT. Because S. aureus forms grape-like clusters, nine types of glass filters with pore sizes of 0.5-2.7 µm were evaluated to obtain a uniform bacterial suspension. The suspension was then heat-treated to kill the bacteria, resulting in HKSA samples. Serial dilutions of HKSA were tested by MAT using peripheral blood mononuclear cells. The interleukin-6 concentrations in the culture supernatant were measured by enzyme-linked immuno-sorbent assay to assess pyrogenic activities of HKSA. The pore sizes of the glass filters affected the uniformity of HKSA, and GF/C filter was selected for HKSA preparation. Repeated filtration improved uniformity, and a uniform suspension of HKSA was obtained through double filtration using a GF/C filter. Despite the decrease in HKSA activity as filtration frequency increased, the detection limit remained consistently unchanged. This suggests that repeated filtration can adjust the activity of HKSA to a baseline level and that a uniform suspension of HKSA exhibiting low variation is suitable as a positive control in MAT.
Asunto(s)
Calor , Monocitos , Pirógenos , Staphylococcus aureus , Humanos , Monocitos/inmunología , Interleucina-6/metabolismo , Leucocitos Mononucleares/inmunología , Filtración , SuspensionesRESUMEN
Iron-based adsorbents are commonly used to remove arsenic (As) from water for drinking water purposes. Here, we study the role of biological As(III) oxidation on iron-based adsorbents in filters and its effect on overall As uptake. A lab-scale filter with iron oxide coated sand (IOCS), a commonly used adsorbent, was operated with water containing As(III) and As(V), while water samples were taken periodically over its height. As(III) oxidation initiated after approximately 10 days and increased to a first order rate constant of 0.09 s-1 after 57 days resulting in full oxidation of As(III) in <50 s. Consequently, the filter shifted from an As(III) to an As(V) adsorbing filter. Oxidation was not observed after inhibiting the microbial activity using sodium azide confirming its biogenic nature. This implies that As(III) oxidizing biomass can grow on iron-based adsorbents in water filters without requiring inoculation. As the experimental conditions were similar to full-scale As treatment plants, we believe that biological As(III) oxidation is widely overlooked in these systems. Occurrence of biological oxidation is, however, beneficial for removal, as at pH <8 the adsorption capacity for As(V) can be up to 10-fold higher than for As(III). With these new insights, arsenic treatment using iron-based adsorbents can be further optimized. We suggest a more robust new design with a biological active As(III) oxidizing top layer and an As(V) adsorbing bottom layer.
Asunto(s)
Arsenitos , Filtración , Agua Subterránea , Hierro , Oxidación-Reducción , Contaminantes Químicos del Agua , Purificación del Agua , Arsenitos/química , Agua Subterránea/química , Adsorción , Purificación del Agua/métodos , Hierro/química , Contaminantes Químicos del Agua/química , Dióxido de Silicio/químicaRESUMEN
Rapid sand filters are established and widely applied technologies for groundwater treatment. In these filters, main groundwater contaminants such as iron, manganese, and ammonium are oxidized and removed. Conventionally, intensive aeration is employed to provide oxygen for these redox reactions. While effective, intensive aeration promotes flocculent iron removal, which results in iron oxide flocs that rapidly clog the filter. In this study, we operated two parallel full-scale sand filters at different aeration intensities to resolve the relative contribution of homogeneous, heterogeneous and biological iron removal pathways, and identify their operational controls. Our results show that mild aeration in the LOW filter (5 mg/L O2, pH 6.9) promoted biological iron removal and enabled iron oxidation at twice the rate compared to the intensively aerated HIGH filter (>10 mg/L O2, pH 7.4). Microscopy images showed distinctive twisted stalk-like iron solids, the biosignatures of Gallionella ferruginea, both in the LOW filter sand coatings as well as in its backwash solids. In accordance, 10 times higher DNA copy numbers of G. ferruginea were found in the LOW filter effluent. Clogging by biogenic iron solids was slower than by chemical iron flocs, resulting in lower backwash frequencies and yielding four times more water per run. Ultimately, our results reveal that biological iron oxidation can be actively controlled and favoured over competing physico-chemical routes. The production of more compact and practically valuable iron oxide solids is of outmost interest. We conclude that, although counterintuitive, slowing down iron oxidation in the water before filtration enables rapid iron removal in the biofilter.
Asunto(s)
Filtración , Agua Subterránea , Hierro , Purificación del Agua , Agua Subterránea/química , Hierro/química , Purificación del Agua/métodos , Contaminantes Químicos del Agua , Gallionellaceae , Oxidación-ReducciónRESUMEN
Currently, the most effective way to improve the anti-fouling performance of water treatment separation membrane is to enhance the hydrophilicity of the membrane surface, but it can still cause contamination, leading to the occurrence of flux reduction. The construction of a strong hydration layer to resist wastewater contamination is still a challenging task. In this study, a defect-free hydration layer barrier was achieved by grafting chitosan polysaccharide derivatives (CS-SDAEM) on the membrane, which achieved in effective fouling prevention and low flux decline rate. A layer of tannic acid-coated carbon nanotubes (TA@CNTs) has been uniformly deposited on the commercial PVDF membrane so that the surface was rich in -COOH groups, providing sufficient reaction sites. These reactive groups facilitate the grafting of amphiphilic polymers onto the membrane. This modification strategy achieved in enhancing the antifouling performance. The modified membrane achieved low contamination rate with DR of 16.9 % for wastewater filtration, and the flux recovery rate was above 95 % with PWF of 1100 (L·m-2·h-1). The membrane had excellent anti-fouling performance, which provided a new route for the future development of water treatment membrane.
Asunto(s)
Quitosano , Emulsiones , Membranas Artificiales , Nanotubos de Carbono , Polivinilos , Purificación del Agua , Purificación del Agua/métodos , Quitosano/química , Polivinilos/química , Nanotubos de Carbono/química , Taninos/química , Polisacáridos/química , Agua/química , Aguas Residuales/química , Aceites/química , Interacciones Hidrofóbicas e Hidrofílicas , Filtración/métodos , Polímeros de FluorocarbonoRESUMEN
Introduction: Injecting methamphetamine poses significant health risks, but little is known about how methamphetamine injectors filter their injection preparations and experience related health concerns. Methods: A chain-referral sample of Indigenous people who inject methamphetamine (n = 30) was recruited and semistructured interviews were conducted to collect information on filtration practices and health concerns. Results: Filtration of the injection preparation was described by 53% of injectors. Elevated levels of concern for kidney disease, cancer and heart disease were observed among those who filtered their preparations (ranging from 50 to 56.3%). Concern about liver disease was the most frequent concern among those who filtered their preparations (62.5%) and was elevated in comparison to those who did not use filters (7.1%). Grouped logistic regression revealed a positive association between filtration of the injection preparation and overall health concerns expressed by injectors, after adjusting for gender and age. The marginal posterior distribution of the adjusted odds ratio for filtration of the injection preparation had a posterior median = 35.7, and 95% HPD interval = (5.1, 512.4). Discussion: Results illustrate a positive relationship between filtration of the injection preparation and health concerns among Indigenous people who inject methamphetamine. This likely reflects the use of filtration to reduce harms, and further research is needed to understand the full scope of prevention that may be associated with filtration of methamphetamine injection preparations.
Asunto(s)
Metanfetamina , Abuso de Sustancias por Vía Intravenosa , Humanos , Metanfetamina/administración & dosificación , Masculino , Femenino , Adulto , Filtración , Persona de Mediana Edad , Pueblos Indígenas , Adulto Joven , Entrevistas como AsuntoRESUMEN
Objective.A simple, low-cost ripple filter consisting of multiple mesh sheets (mRiFi) was previously developed to reproducibly widen the Bragg peak of heavy-ion beams. To fabricate the mRiFi, the mRiFi parameters such as the wire material, wire diameter, wire spacing, and number of mesh sheets had to be determined. However, it was unclear how these parameters contribute to shifting and widening of the Bragg peak as well as to lateral spreading of the beam passing through the mRiFi. The purposes of this study were to clarify the contributions and to propose a recipe for fabricating a mRiFi with the desired performance values.Approach. We established an analytical calculation method to estimate shifting and widening of the Bragg peak and lateral spreading of heavy-ion beams passing through the mRiFi for given mRiFi parameter values. We also performed Monte Carlo simulations to validate the analytical calculation method. The recipe for fabricating the mRiFi with desired performances was established based on the analytical calculation method. Using the recipe, we fabricated the mRiFi for multi-ion therapy and evaluated its performance through demonstration experiments with helium-, carbon-, oxygen-, and neon-ion beams.Main results.The difference between the results of the Monte Carlo simulation and the analytical calculation was less than 0.4 mm for the peak shift, 0.15 mm for the peak width, and less than 0.11 mm for the lateral beam size which validated the analytical calculation method. The experimentally observed shift and width of the Bragg peak were consistent with the analytical calculations.Significance.We proposed a method to determine mRiFi parameters for fabricating a mRiFi with a desired performance, i.e. adequate widening of the Bragg peak with an acceptable peak shift and lateral beam spread. The proposed method allows anyone to fabricate a simple and low-cost mRiFi satisfying desired specifications.
Asunto(s)
Método de Montecarlo , Radioterapia de Iones Pesados/instrumentación , Filtración/instrumentaciónRESUMEN
Organic materials such as bark and biochar can be effective filter materials to treat stormwater. However, the efficiency of such filters in retaining microplastics (MPs) - an emerging stormwater pollutant - has not been sufficiently studied. This study investigated the removal and transport of a mixture of MPs commonly associated with stormwater. Different MP types (polyamide, polyethylene, polypropylene, and polystyrene) were mixed into the initial 2 cm material of horizontal bark and biochar filters of 25, 50, and 100 cm lengths. The MP types consisted of spherical and fragmented shapes in size ranges of 25-900 µm. The filters were subjected to a water flow of 5 mL/min for one week, and the total effluents were analyzed for MPs by µFTIR imaging. To gain a deeper insight, one 100 cm bark filter replica was split into 10 cm segments, and MPs in each segment were extracted and counted. The results showed that MPs were retained effectively, >97%, in all biochar and bark filters. However, MPs were detected in all effluents regardless of filter length. Effluent concentrations of 5-750 MP/L and 35-355 MP/L were measured in bark and biochar effluents, respectively, with >91% of the MP counts consisting of small-sized (25 µm) polyamide spherical particles. Combining all data, a decrease in average MP concentration was noticed with longer filters, likely attributed to channeling in a 25 and 50-cm filter. The analyses of MPs in the bark media revealed that most MPs were retained in the 0-10 cm segment but that some MPs were transported further, with 19% of polyamide retained in the 80-90 cm segment. Overall, this study shows promising results for bark and biochar filters to retain MPs, while highlighting the importance of systematic packing of filters to reduce MP emissions to the environment from polluted stormwater.