Is there a difference in quality of photographs obtained using smartphones, compared to the photographs obtained via digital single-lens reflex camera?

OBJECTIVE: The purpose of this study was to compare the quality of photographs obtained with 3 different cameras: iPhone, Samsung, and digital single-lens reflex (DSLR), as assessed by oral and maxillofacial surgeons (OMS). METHODS: This was an anonymous online survey study. The study population consisted of OMS in New Jersey, New York, Pennsylvania, and Massachusetts who were members of their state societies. The primary outcome variable was ratings on the quality of extraoral and intraoral photographs obtained with 3 different cameras. The predictor variable was the type of camera used to obtain the photographs: iPhone, Samsung, and DSLR camera. Descriptive statistics were computed. Spearman test was utilized to analyze correlation between the outcome variables. RESULTS: The majority of respondents were from full time private practice (n = 84, 77.06%), followed by full time academia (n = 12, 11.01%). The Spearman test revealed negligible correlation between extraoral and intraoral photographs on the best quality rating (0.15, P = .13). Negligible correlation between extraoral and intraoral photographs were noted on the second best (0.15, P = .11), and least quality rating (0.09, P = .32). CONCLUSION: Study results revealed that there is no difference between the quality of photographs obtained using smartphones, compared with the photographs obtained via a DSLR camera. Future discussions on an ideal application on smartphones would allow for consent and transfer of high-quality photographs via a secure messaging system between health care providers to address ethical concerns of confidentiality. (Oral Surg Oral Med Oral Pathol Oral Radiol YEAR;VOL:page range).

Initial screening for dental abnormalities identified by labial and buccal photographs in dogs and cats.

OBJECTIVE: To evaluate the dental abnormalities by visually assessing the labial and buccal photographs in dogs and cats and analyze their prevalence based on age and breed. ANIMALS: 1,096 client-owned dogs and 775 client-owned cats. METHODS: Data were collected from patients who visited 26 private veterinary clinics from January to December 2022. Each animal was evaluated through dental photographs taken from the labial and buccal sides. Correlations between the prevalence of the identified dental abnormalities and age, craniofacial type, and breed, were analyzed. RESULTS: Calculus, discoloration, epulis, fractured teeth, gingival recession, gingivitis, malocclusion, missing teeth, and persistent deciduous teeth could be identified by analyzing the dental photographs in both dogs and cats. Enamel defects in dogs and tooth resorption in cats could be identified. Brachycephalic dogs had a significantly higher prevalence of malocclusion (OR, 1.93; 95% CI, 1.36 to 2.75) and missing teeth (OR, 3.63; 95% CI, 2.71 to 4.91) compared to nonbrachycephalic dogs. Brachycephalic cats had a significantly higher prevalence of fractured teeth (OR, 1.95; 95% CI, 1.24 to 3.04) and a lower prevalence of gingival recession (OR, 0.30; 95% CI, 0.15 to 0.55) compared to nonbrachycephalic cats. Calculus, persistent deciduous teeth, and possibly gingivitis could be identified in dogs and cats by analyzing labial and buccal photographs. The assessment of some dental abnormalities such as fractured teeth, missing teeth, and tooth resorption can be limited without a complete dental examination under anesthesia. CLINICAL RELEVANCE: Although the assessment of dental conditions may be underestimated, the data on the prevalence of the dental abnormalities evaluated through the photographs could be utilized for screening dental diseases.

Advancements in diagnosing oral potentially malignant disorders: leveraging Vision transformers for multi-class detection.

OBJECTIVES: Diagnosing oral potentially malignant disorders (OPMD) is critical to prevent oral cancer. This study aims to automatically detect and classify the most common pre-malignant oral lesions, such as leukoplakia and oral lichen planus (OLP), and distinguish them from oral squamous cell carcinomas (OSCC) and healthy oral mucosa on clinical photographs using vision transformers. METHODS: 4,161 photographs of healthy mucosa, leukoplakia, OLP, and OSCC were included. Findings were annotated pixel-wise and reviewed by three clinicians. The photographs were divided into 3,337 for training and validation and 824 for testing. The training and validation images were further divided into five folds with stratification. A Mask R-CNN with a Swin Transformer was trained five times with cross-validation, and the held-out test split was used to evaluate the model performance. The precision, F1-score, sensitivity, specificity, and accuracy were calculated. The area under the receiver operating characteristics curve (AUC) and the confusion matrix of the most effective model were presented. RESULTS: The detection of OSCC with the employed model yielded an F1 of 0.852 and AUC of 0.974. The detection of OLP had an F1 of 0.825 and AUC of 0.948. For leukoplakia the F1 was 0.796 and the AUC was 0.938. CONCLUSIONS: OSCC were effectively detected with the employed model, whereas the detection of OLP and leukoplakia was moderately effective. CLINICAL RELEVANCE: Oral cancer is often detected in advanced stages. The demonstrated technology may support the detection and observation of OPMD to lower the disease burden and identify malignant oral cavity lesions earlier.

Parental use and acceptance of an accessible, commercially available intraoral camera for teledentistry in their children.

PURPOSE: The potential of combining teledentistry and engaging parents as underutilised resources to monitor paediatric dental health was emphasised during the COVID-19 pandemic and remains underexplored. This study aims to assess parental acceptance and use of a commercially available intraoral camera (IOC) for effective remote monitoring. METHODS: 47 child-parent dyads, where the parent was the main caregiver and the child was treated under general anaesthesia for early childhood caries, were recruited. Caregivers were trained to image their child's teeth on a commercially available IOC. Subsequently, submitted images were reviewed asynchronously by dentists for image quality, presence of dislodged fillings, abscesses, cavitation, and oral hygiene. Post-surgery monitoring was performed using teledentistry at 1 and 2 months and in-person at 4 months. A modified Telehealth Usability Questionnaire (TUQ) was used to record caregiver acceptance for study procedures. RESULTS: A mean TUQ of 6.09 out of 7 was scored by caregivers. Caregiver-reported issues were limited to problems with technique and child uncooperativeness. The number of clear images during the second teledentistry review was improved compared to the first (p = 0.007). 68% of children liked having images of their teeth taken. CONCLUSION: This study supports the feasibility of using an IOC as a clinically appropriate avenue for teledentistry with a high level of caregiver-child acceptance.

Diagnostic accuracy of tele-dentistry in screening children for dental caries by community health workers in a lower-middle-income country.

BACKGROUND: Tele-dentistry can be useful for dental caries screening of children, especially in lower-middle-income countries (LMICs). AIM: To evaluate the diagnostic accuracy of mobile phone photographs taken by a community health worker (CHW) for caries detection in Iran. DESIGN: Children aged 6-12 years were visually examined by a paediatric dentist. Following dental examinations, intraoral photographs were taken by a trained CHW. Two remote dentists assessed intraoral photographs for dental caries. Diagnostic accuracy of tele-dentistry for caries detection was evaluated. In addition, the questionnaire about oral health and parents' views towards tele-dentistry was prepared. RESULTS: One hundred thirty-one children aged 8.74 ± 1.62 years participated. The caries prevalence was 30% for the whole dentition. Tele-dentistry demonstrated high accuracy, with a sensitivity exceeding 80% and specificity exceeding 90%. The inter-rater reliability for remote dentists' assessments to the gold standard dental examination ranged from substantial to almost perfect (kappa: 75%-93%). Additionally, 80% of parents whose children participated in this study had positive views towards tele-dentistry. CONCLUSION: Tele-dentistry was shown to be an alternative approach to clinical examinations for caries detection among school children. Employing non-dental care professionals in tele-dentistry has been emerged as a reliable and cost-effective approach, especially in LMICs.

Correção de sorriso gengival em paciente com displasia cemento óssea florida / Correction of gingival smile in patient with cemento bone dysplasia florida

Com os avanços tecnológicos na odontologia o planejamento digital se tornou algo mais presente na prática clinica. O objetivo desse trabalho é relatar uma experiência vivida em clínica sobre harmonização do sorriso através de uma gengivoplastia e remodelação óssea em paciente com displasia cemento óssea florida. Paciente 42 anos, autodeclarada do sexo feminino, não relatou nenhuma alteração sistêmica, uso de medicamento ou tabagismo, entretanto relatou ter displasia cemento óssea florida com diagnóstico de periodonto saudável. Compareceu a clínica escola de uma instituição de Ensino Superior para realização de tratamento odontológico queixando-se da aparência de seus dentes. Neste caso, foi utilizado escaneamento digital, tomografia computadorizada para tecidos moles, Digital Smile Design (DSD) e Perioguide (guia cirúrgico) para a realização do procedimento de harmonização do sorriso através da cirurgia periodontal. Em suma, apesar da displasia óssea ser um fator limitante ao sucesso ideal do procedimento, o resultado final alcançado foi satisfatório sob ótica do paciente e profissional não havendo recidiva(AU)

With technological advances in dentistry, digital planning has become something more present in clinical practice. The objective of this work is to report a clinical experience on smile harmonization through gingivoplasty and bone remodeling in a patient with florid cemento-osseous dysplasia. Patient 42 years old, self-reported female, did not report any systemic changes, use of medication or smoking, however she reported having florid cemento-osseous dysplasia with a diagnosis of healthy periodontium. He attended the school clinic of a Higher Education institution for dental treatment, complaining about the appearance of his teeth. In this case, digital scanning, soft tissue computed tomography, Digital Smile Design (DSD) and Perioguide (surgical guide) were used to perform the smile harmonization procedure through periodontal surgery. In short, despite bone dysplasia being a limiting factor for the ideal success of the procedure, the final result achieved was satisfactory from the perspective of the patient and professional, with no recurrence(AU)

Fluxo digital na odontologia através do escaneamento intraoral em próteses fixas: revisão integrativa / Digital flow in dentistry through intraoral scanning in fixed prosthesis: integrative review

As novas tecnologias utilizadas na Odontologia, como a digitalização de imagens, estão levando a mudanças significativas na obtenção de próteses e infraestruturas protéticas, de funcionamento de softwares. A grande área da engenharia desenvolve processos para fabricação de diversos produtos industrializados com auxílio da tecnologia CAD/CAM. O uso desta técnica vem sendo sugerido na clínica odontológica desde a década de setenta, com o objetivo de simplificar, automatizar e garantir níveis de qualidade com adaptações micrométricas das próteses dentárias. O processo pode envolver diferentes ambientes: industrial, laboratorial ou clínico. O objetivo do presente estudo é revisar de forma integrativa a utilização do escaneamento na Odontologia na área de Prótese Dentária, enfatizando os resultados do seu uso e as diferentes formas de escaneamento e comparando, quando possível, este sistema ao método convencional de moldagem. Notou-se que o escaneamento intraoral resulta em próteses fixas com funcionalidade clínica similar ou melhor do que a moldagem convencional, além de estar relacionada a um conforto aumentado por parte do paciente. Além disto, o escaneamento intraoral reduz o tempo de cadeira do paciente, além de estar associado ao fluxo digital laboratorial mais rápido, o que reduz também o tempo total de fabricação destas próteses, sendo ideal para uma melhor administração do tempo de consultório.

Facetas diretas em resina composta utilizando o fluxo digital para planejamento: relato de caso / Direct facets in composite resin using digital flow for planning: case report / Facetas directas en resina compuesta utilizando flujo digital para planificación: reporte de caso

Introdução:O aprimoramento das resinas compostas nos últimosanos em associação com a difusão de informações nas redes sociais tornou as facetas diretas tratamentos populares na dentística restauradora. No entanto, são procedimentos que exigem ampla destreza manual e conhecimento técnico. O fluxo digital através doescaneamento, enceramento digital e prototipagem 3D para construção de guias tem se tornado uma excelente alternativa para aumentar a previsibilidade e aumentar a longevidade destes trabalhos. Objetivo:Descrever o protocolo de confecção de facetas diretas em resina composta, através de um relato de caso, utilizando como auxílio o planejamento digital para confecção de modelo 3D, guia de silicone e paredes palatinas. Descrição do Caso:Paciente do gênero masculino, 43 anos, queixava-se do formato dos seus dentes. Ao exame clínico percebeu-se desgaste dental nos incisivos centrais e linha do sorriso levemente invertida. Após duas sessões de clareamento de consultório com Peróxido de hidrogênio (35%) e mockup direto com resina composta, foi realizada a moldagem e escaneamento do modelo de gesso no laboratório. O enceramento digital foi aprovado, o modelo 3D foi impresso para confecção da guia de silicone. Com auxílio da guia foram executadas facetas diretas nos elementos 13, 12, 11, 21, 22 e 23. Conclusão:O fluxo digital pode ser uma alternativa viável para minimizar as falhas na confecção de facetas diretas em resina composta (AU).

Introduction:The improvement of composite resins in recent years, together with information disseminated on social media, has made direct veneers popular treatments in restorative dentistry. However, these procedures require significant manual dexterity and technical knowledge. Digital work flow using scanning, digital wax-up and 3D prototyping for the construction of guides has become an excellent alternative to increase predictability and the longevity of these procedures. Objective:Describe the manufacturing protocol for direct composite resin veneers, using a case report and digital to construct the 3D model, silicone guide and palatine walls. Case description:Male patient, 43 years old, complained of the shape of his teeth. Clinical examination revealed tooth wear on the central incisors and a slightly inverted smile line. After two whitening sessions with hydroigen peroxide (35%) and direct mockup with composite resin, the plaster model was molded and scanned in the laboratory. Digital wax-up was approved, and the 3D model was printed to manufacture the silicone guide. With the help of the guide, the direct veneers were applied to elements 13, 12, 11, 21, 22 and 23.Conclusions:Digital flow may be a feasible alternative to minimize manufacturing flaws in direct composite resin veneers (AU).

Introducción: La mejora de las resinas compuestas en los últimos años, y la difusión de información en las redes sociales, ha popularizado las facetas directas en los tratamientos en odontología restauradora. Sin embargo, son procedimientos que requieren demasiado destreza manual y conocimientos técnicos. El flujo digital usando escaneo, encerado digital y prototipado 3D para la construcción de guías se ha convertido en una excelente alternativa para aumentar la previsibilidad y la longevidad de estos procedimientos. Objetivo: Describir el protocolo para la realización de carillas directas en resina compuesta, a través de un reporte de caso, utilizando el planeo digital como ayuda para la realización de un modelo 3D, guía de silicona y paredes palatinas. Descripción del caso: Paciente masculino, 43 años, se quejó de la forma de sus dientes. El examen clínico reveló desgaste dental en los incisivos centrales y una línea de sonrisa levemente invertida. Después de dos sesiones de blanqueamiento en consultorio con peróxido de hidrógeno (35%) y maqueta directa con resina compuesta, el modelo de yeso fue moldeado y escaneado en el laboratorio. El encerado digital fue aprovado, el modelo 3D fue impreso para hacer la guía de silicona. Con la ayuda de la guía se realizaron carillas directas en los elementos 13, 12, 11, 21, 22 y 23. Conclusiones: El fluxo digital puede ser una alternativa viable para minimizar fallas en la fabricación de carillas directas en resina compuesta (AU).

Use of Images and Clinical Experience to Calibrate Dental Surgeons for the Diagnosis of Molar Incisor Hypomineralization

ABSTRACT Objective: To evaluate an imaging protocol for use as a diagnostic and calibration tool for dentists before and after practical activity. Material and Methods: Thirty photos of children's teeth with or without changes in dental enamel were selected and evaluated by a group of experienced dentists previously calibrated to establish the diagnosis defined as the gold standard. After instructions, the images were shown to a group of postgraduate dentists for free identification of dental changes. Subsequently, a lecture on molar incisor hypomineralization (MIH) was carried out, and, at 14 days and all calibration was performed using the criteria previously. The retest was performed at 28 days. After experience in clinical activity in the following two weeks, the post-test was performed at 49 days. Data were analyzed using Cohen's kappa coefficient. Results: Theoretical learning on the subject showed low inter-examiner agreement when the diagnosis of defects was made from images obtained from intraoral photographs. After clinical practice, there was greater intra-examiner agreement. After theoretical training, dentists started to identify different types of enamel alteration, although with low agreement between them. Conclusion: Clinical experience in theoretical and imaging training favored the identification of defects. However, it is necessary to improve the protocol to establish a reliable and viable diagnostic method for calibration in MIH.

Reproducibility and comparison between methods for gingival color evaluation: a validation study

Aim This study aims to evaluate and validate the sensibility and the level of agreement between different gingival color measures obtained by a spectrophotometer (SPECTRO) and a photography (PHOTO) method. Methods Among 40 patients, the color was measured 2 mm apical to the gingival margin by CIE L*, a*, b* system using a reflectance spectrophotometer and the photography's plus software. The level of agreement between three different measures (m1, m2, m3) in parameters L*, a*, b*, and ∆E (color variation) was evaluated by random and systematic errors, as well as the limits and coefficient of concordance. A comparison between the methods was performed by the Bland-Altman test and the sensibility level was evaluated accordingly to the ∆E: 3.7 thresholds with p<0.05 as the level of significance for these comparisons. Results The SPECTRO method has not presented the systematic error (p>0.05) and had reproducibly and agreement level in three variable measures L* (r: 0.6), a* (r: 0.3), and b* (r: 0.5) as to the PHOTO method L* (r: 0.6), a* (r: 0.5), and b* (r: 0.5), which presented systematic error in L* values (p<0.05). The means of ∆E between measurements were: 6.5 SPECTRO and 5.9 PHOTO. There was no good level of sensitivity ∆E> 3.7 and agreement between the methods, mainly for the a* values. On the other hand, for the L* and in for the most comparisons of b* values, the level of agreement was higher. Conclusion Both methods could quantify the gingival color from the coordinates L *, a *, and b *, which has shown greater reliability between the measurements acquired by the SPECTRO method.

Influencia de la edad, sexo y ocupación sobre la percepción estética del perfil facial / Influence of age, sex and occupation on the aesthetic perception of the facial profile

Objective: To study the infuence of age, sex, and occupation in determining the aesthetic perception of the facial profle in the Chilean population through the analysis of silhouettes. Methods: From a profle photograph, a digital silhouette was designed, which was modifed with 2mm movements from the original position of the chin, simulating mandibular protrusion and retrusion. The use of silhouettes allows for eliminating various distractions, prejudices, and predispositions when making an aesthetic judgment. All participants accepted informed consent. Results: 112 participants with a mean age of 33.99 ± 8.28 years were surveyed. When analyzing the most aesthetic option was a straight profle, followed by a slight retrusion of -2mm and a protrusion of +2mm. The least esthetic option was a severe protrusion of +12mm. Both results were repeated in all the groups analyzed. Conclusions: The results present similarities with the literature, however, the low concordance in this study may be due to possible indirect infuences due to the contrast of the images that made up each set and the limited size of the studied sample. The present study was the frst of these characteristics in a Chilean population.

Objetivo: estudiar la infuencia de la edad, sexo y ocupación en la determinación de la percepción estética del perfl facial en la población chilena mediante el análisis de siluetas. Métodos: a partir de una fotografía de perfl se diseñó una silueta digital la cual se modifcó con movimientos de 2mm desde la posición original del mentón simulando una protrusión y retrusión mandibular. El uso de siluetas permite eliminar diversas distracciones, prejuicios y predisposiciones al momento de emitir un juicio estético. Todos los participantes aceptaron el consentimiento informado. Resultados: se encuestaron 112 participantes con una edad media de 33.99 ± 8.28 años. Al analizar la opción más estética fue un perfl recto, seguido de una leve retrusión de -2mm y una protrusión de +2mm. La opción menos estética fue una protrusión severa de +12mm. Ambos resultados se repitieron en todos los grupos analizados. Conclusiones: los resultados presentan similitudes con la literatura, sin embargo, la baja concordancia en este estudio puede deberse a posibles infuencias indirectas por contraste de las imágenes que compusieron cada set y el limitado tamaño de la muestra estudiada. El presente estudio fue el primero de estas características en la población chilena.

Dental Whitening: Self-Referred Needs versus Professional Indication

Abstract Objective: To analyze the self-reported need of patients compared to professional indications for tooth whitening. Material and Methods: Initially, 58 undergraduate students responded to a form that highlighted the question: "Do you think you need to have your teeth whitened?" Among those who answered positively to the previous question, ten individuals were photographed with their smiles. In addition, they were asked to point out, on the Vita 3D-Master scale, which color they believed their teeth had, a value that was compared to the actual color obtained by a spectrophotometer. Finally, the photographs were presented to dentists, who were asked about the indication or not of the whitening treatment. Results: Most interviewees (63.8%) self-reported the need for whitening, as well as there was a greater incidence of a positive indication among professionals (53.9%). Pearson's Chi-square test revealed a relationship between patient gender and the training course on the desire to have teeth whitened. Among the professionals, the specialty, as well as time since graduation, interfered in the indication for whitening. Conclusion: Professionals and patients share the aesthetic ideal directly related to light teeth; most patients self-perceive the color of their teeth darker than it actually is; the opinion about the color of the teeth has an extremely subjective character and varies greatly from one professional to another (AU).

Smile Arc Esthetics in Middle-Aged Man from the Layperson's Perspective Via Eye-Tracking

Abstract Objective: To evaluate the perceptions of smile esthetics associated with variations in the vertical plane of the maxillary incisors in the smile arc using eye-tracking software. Material and Methods: An image of a 59-year-old Caucasian male model was adapted and edited to make three changes in the vertical plane, simulating a convex, straight, and reverse smile arc. Four areas of interest were inserted at the right and left eyes, nose, and mouth. Forty laypeople raters between 18 and 45 years of age participated of the study. Eye-tribe hardware and Ogama software were used to perform eye-tracking. Attractiveness and age-perception questions were also incorporated into the study. ANOVA test and Pearson's correlation coefficient, at p < 0.05. Results: The most observed AOI in images with convex, straight, and reverse smiles, as assessed using heatmaps and point maps, was the mouth, followed by the right eye. A significant difference for the eye (p=0.02) was found when comparing convex and reverse smiles, whereas a significant difference for the mouth was observed between the straight and reverse smiles (p=0.03). Conclusion: Convex and straight smile arcs were associated with equal levels of attractiveness; the reverse smile was less attractive. No significant difference was noticed regarding age perception and the smile arcs. However, the reverse smile recorded a more complete fixation time.

3D stereophotogrammetry quantification for tissue repositioning using Botulinum toxin A: a case report / Quantificação por estereofotogrametria 3D para reposicionamento tecidual com Toxina botulínica A: relato de caso

Hereby, we objectively assessed the outcomes of a facial-lifting procedure with Botulinum toxin type A (BoNT-A) using a 3D stereophotogrammetry quantification (3D-SQ). A 46-year-old female patient received a full face BoNT-A treatment in a total dose of 180 Speywood Units (sU). Frontal, lateral and oblique photographs were taken before and 20 days after treatment, at rest and during mimic movements. Also, a facial scanning was performed before and 20 days after BoNT-A injections. The results were analyzed using a 3D-SQ software. The photographs showed a decrease in expression lines and dynamic wrinkles. In addition, a better-defined jawline and volume gain in the midface area with improvement of the profile appearance, due to the reduction of the sagging skin under the chin, was observed. The 3D-SQ showed volume gains of 1.17 ml on the right and of 1.59 ml on the left cheekbone areas, due to the cranially soft-tissue repositioning. In addition, a decrease in the volume of melomental folds areas (0.27ml on the right and 0.41 ml on the left side) was reported, compatible to the above-mentioned volume gain. Measurements considering cephalometric points showed a decrease in the total facial height (distance from Trichion to Mental points), suggesting a soft tissue dislocation in an upward direction. Finally, this case report showed quantitative results that can evidence the role of BoNT-A in facial- lifting procedures. These results reinforce the importance of using a 3D-SQ to assess the outcomes of BoNT-A and, probably, other aesthetic procedures.(AU)

No presente estudo avaliamos objetivamente os resultados de um procedimento de lifting facial com toxina botulínica tipo A (BoNT-A) usando uma quantificação de estereofotogrametria 3D (3D-SQ). Uma paciente do sexo feminino de 46 anos recebeu um tratamento facial completo com BoNT-A em uma dose total de 180 unidades Speywood (sU). Fotografias frontais, laterais e oblíquas foram tomadas antes e 20 dias após o tratamento, em repouso e durante os movimentos mímicos. Além disso, um escaneamento facial foi realizado antes e 20 dias após as injeções de BoNT-A. Os resultados foram analisados por meio de um software 3D-SQ. As fotografias mostraram uma diminuição das linhas de expressão e rugas dinâmicas. Além disso, observou-se um maxilar mais bem definido e ganho de volume na região média da face com melhora da aparência do perfil, devido à redução da flacidez da pele sob o queixo. O 3D-SQ apresentou ganho de volume de 1,17 ml à direita e 1,59 ml à esquerda, devido ao reposicionamento do tecido mole. Além disso, foi relatada diminuição do volume das áreas do sulco mentual (0,27 ml à direita e 0,41ml à esquerda), compatível com o ganho de volume acima citado. As medidas considerando os pontos cefalométricos mostraram uma diminuição da altura facial total (distância dos pontos Triquion ao Mentual), sugerindo um deslocamento superior dos tecidos moles. Em conclusão, este relato de caso mostrou resultados quantitativos que podem evidenciar o papel da BoNT-A em procedimentos de lifting facial. Esses resultados reforçam a importância da 3D-SQ para avaliar objetivamente os resultados de harmonização orofacial com BoNT-A e outros materiais. (AU)

Evaluación de la sonrisa en pacientes con necesidad de tratamiento ortodóntico / Smile evaluation in patients in need of orthodontic treatment

Este trabajo tuvo como objetivo evaluar características de la sonrisa en pacientes con necesidad de tratamiento ortodóntico. Como objetivos específicos, se planteó estudiar el arco de la sonrisa, la línea del labio superior y los corredores bucales, que son tres componentes importantes a la hora de elaborar un plan de tratamiento adecuado para devolver al paciente una sonrisa funcional y estéticamente aceptable. La muestra quedó conformada por 157 pacientes; de cada uno de ellos se obtuvo una foto de una sonrisa voluntaria. Se encontró que el arco de la sonrisa, en el 39,5 %, presentaba un arco consonante; un 20,4 %, uno plano y el 40,1 % restante, uno no consonante. Al estudiar la línea del labio superior, se observó que, en el 8,3 %, la línea era baja; en el 62,4 %, media y en el 29,3 %, alta. En cuanto a los corredores bucales, se observó que el valor medio, en proporción a la distancia intercomisural del corredor bucal total, era de 15,89 % ± desvío estándar (5,03 %); el valor total máximo, 26,19 % y el valor mínimo, 2,74 %. Conociendo la prevalencia de cada uno de estos datos, se podrá arribar al diagnóstico y posterior plan de tratamiento para cada paciente de manera individualizada(AU)

This work aimed at evaluating smile characteristics in patients in need of orthodontic treatment. As specific objectives, it was raised the issue of studying the smile arch, upper lip line and buccal corridors, which are three important components when preparing an adequate treatment plan to restore the patient a functional and aesthetically acceptable smile. The sample consisted of 157 patients and a photo of a voluntary smile was obtained from each of them. It was found that the smile arch had a consonant arch in 39.5%, 20.4% a flat arch and the remaining 40.1% a nonconsonant arch. When studying the upper lip line, it was observed that in 8.3% the line was low, 62.4% medium and 29.3% high. As regards the buccal corridors, it was observed that the mean value in proportion to the intercommissural distance of the total buccal corridor was 15.89% ± standard deviation (5.03%); maximum total value was 26.19% and minimum value 2.74%. Knowing about the prevalence of each of these data, it will be able to arrive at the diagnosis and subsequent treatment plan for each patient individually(AU)

Orthodontic Records Helping to Identify A Victim of Execution / Registros Ortodonticos que Ayudan a Identificar una Víctima de Ejecución

Human identification is the process that identifies an individual as a unique being, differentiating him/ her from all others. The participation of Odontology in the processes of identification is fundamental in situations of human remains. This paper aims to report a case of positive identification, through dentistry, in human remains. The forensic odontologist performed a post-morten (PM) examination, which consisted of the collection of post-mortem dental findings in human bones, collection of ante-mortem (AM) dental findings in the patient's orthodontic records, and the comparison between AM and PM information. Dental elements are widely used in the processes of human identification, since they are resistant to time and to physical, chemical and mechanical impacts. Positive identification is guided by the presence of individualizing characteristics, easily detected in dental records. It is concluded that human identification through dentistry is a safe and reliable method, since dental elements have individualizing characteristics that make the process possible.

La identificación humana es el proceso que identifica a un individuo como un ser único, diferenciándolo de todos los demás. La participación de la Odontología en los procesos de identificación es fundamental en situaciones de restos humanos. Este trabajo tiene como objetivo reportar un caso de identificación positiva, a través de la odontología, en restos humanos. El odontólogo forense realizó un examen post-morten (PM), que consistió en la recolección de hallazgos dentales post-mortem en huesos humanos, recolección de hallazgos dentales ante-mortem (AM) en los registros de ortodoncia del paciente y la comparación entre AM y Información de PM. Los elementos dentales son ampliamente utilizados en los procesos de identificación humana, ya que son resistentes al tiempo y a los impactos físicos, químicos y mecánicos. La identificación positiva está guiada por la presencia de características individualizantes, que se detectan fácilmente en los registros dentales. Se concluye que la identificación humana a través de la odontología es un método seguro y confiable, ya que los elementos dentales tienen características individualizantes que hacen posible el proceso.

Manejo interdisciplinario para una óptima rehabilitación oral / Interdisciplinary management for optimal oral rehabilitation

Las estrategias para el éxito en la rehabilitación bucal requieren de la interrelación de varias disciplinas que en conjunto logren resultados predecibles y duraderos. La visión individualizada de cada área de especialidad puede conllevar a no ofrecer la mejor alternativa de tratamiento, es por ello que la valoración, el diagnóstico y la planificación del caso clínico debe ser realizada por un equipo interdisciplinario para evitar esta situación y crear una sinergia en donde el «todo sea mayor que la suma de sus partes¼. El objetivo de este trabajo es presentar un caso clínico en el cual intervinieron varias áreas de especialidad: periodoncia, prostodoncia, cirugía oral y patología bucal, logrando devolver la función y la estética a través del manejo interdisciplinario (AU)

The strategies for success in oral rehabilitation require the interrelation of several disciplines, which together, achieve predictable and lasting results. The individualized view of each specialty area may lead to not offering the best treatment alternative, which is why the assessment, diagnosis, and planning of the clinical case must be carried out by an interdisciplinary team to avoid this situation and create a synergy in where the «whole is greater than the sum of its parts¼. The objective of this work is to present a clinical case where several areas of specialty intervened: periodontics, prosthodontics, oral surgery, and oral pathology, thus achieving the return of function and aesthetics through interdisciplinary management (AU)

Gorlin-Goltz Syndrome: the importance of Clinical Investigation and a Multidisciplinary Approach / Síndrome de Gorlin-Goltz: la Importancia de la Investigación Clínica y un Enfoque Multidisciplinario

Gorlin-Goltz Syndrome is a genetic disorder characterized by a series of clinical changes, including the presence of multiple odontogenic keratocysts and nevus basal cell carcinomas. As these lesions involve the maxillofacial region and can evolve to severe sequelae, it is essential that the dental surgeon recognize this pathology, in order to promote a correct investigation and early multidisciplinary diagnosis and treatment. The treatment for the cysts varies according to the lesion's characteristics and location, and therefore, the request for complementary exams is essential. According to literature, the approach varies from conservative to more invasive, and several supporting therapies are mentioned. Thus, this article aims to report a case of a young patient diagnosed with Gorlin-Goltz Syndrome by a dental surgeon, who treated conservatively and interdisciplinarly, and obtained a satisfactory result. In addition, it makes a bibliographic review on this genetic condition, elucidating its therapeutic forms.

El síndrome de Gorlin-Goltz es un trastorno genético caracterizado por una serie de cambios clínicos, que incluyen la presencia de múltiples queratoquistes odontogénicos y nevus carcinomas basocelulares. Como estas lesiones involucran la región maxilofacial y pueden evolucionar a secuelas severas, es esencial que el cirujano oral conozca esta patología para realizar una investigación correcta y un diagnóstico y tratamiento multidisciplinario temprano. El plan de tratamiento para los quistes varía de acuerdo con las características y la ubicación de la lesión y, por lo tanto, la solicitud de exámenes complementarios es esencial. Según la literatura, el enfoque varía de conservador a más invasivo, y se mencionan varias terapias de apoyo. Por lo tanto, este artículo tiene como objetivo informar un caso de un paciente joven diagnosticado con el síndrome de Gorlin-Goltz por un cirujano dentista, que trató de forma conservadora e interdisciplinaria, y obtuvo un resultado satis- factorio. Además, realiza una revisión bibliográfica sobre esta condición genética, aclarando sus formas terapéuticas.

Determinación de Valores de Armonía del Perfil Facial en la Población Chilena / Determination of harmony values of the facial profile in the Chilean population

El realizar un tratamiento ortodóntico sólo en base a referencias de tejidos duros, puede llevar a resultados estéticos desfavorables, debido a la gran variabilidad que existe en los tejidos blandos que los recubren. Arnett et al. (1999) presentaron un análisis basado en los tejidos blandos y determinó normas que definen un rostro armónico. Sin embargo, éstas normas se obtuvieron de pacientes norteamericanos y puede que no reflejen los conceptos estéticos de nuestra población. El objetivo del presente trabajo fue determinar valores de armonía facial para la población chilena, utilizando el análisis cefalométrico de tejidos blandos presentado por Arnett et al., y compararlos con los valores previamente establecidos para la población caucásica. Se analizaron 200 fotografías y se clasificaron los perfiles en balanceados y no balanceados según el criterio de un grupo de especialistas. Posteriormente se analizaron las telerradiografías correspondientes a los perfiles clasificados, con el análisis cefalométrico de tejidos blandos. Los valores de las diferentes variables fueron analiza dos separadamente por sexo, clase esqueletal y biotipo facial, y se determinaron las diferencias entre las variables presentadas por Arnett et al. y las obtenidas en el presente estudio. Para ello se utilizaron pruebas de significancia estadística como el test t y otros no paramétricos. Sólo se encontró diferencias significativas en dos variables respecto de las normas sugeridas por Arnett et al., correspondientes a un menor espesor del labio inferior en ambos sexos, y una mayor prominencia del pómulo en mujeres chilenas, por lo que consideramos que los valores de armonía de Arnett et al., pueden ser también aplicados como parámetro estético para la población chilena.

Performing an orthodontic treatment based only on hard tissue references can lead to unfavorable aesthetic results due to the great variability that exists in soft tissues that cover them. In 1999, W.Arnett, presented an analysis based on soft tissues and determined norms that define a harmonious face. However, these standards that were obtained from North Americans and Chilean aesthetic concepts could be different. The aim of the study was to determine the values of facial harmony for the Chilean population, using the cephalometric analysis of soft tissues presented by Arnett, and compare them with the values previously established for the Caucasian population. In this study 200 photographs were analyzed, and the profiles were classified in balanced and unbalanced according to the criteria of a group of specialists. Subsequently, teleradiographs corresponding to the classified profiles were analyzed, with the cephalometric analysis of soft tissues. The values of the different variables were analyzed separately by sex, skeletal class and facial biotype, and the differences between the variables presented by Arnett et al., and those obtained in the present study. For this purpose, statistical significance tests such as the t test and other non- parametric tests were used. There were only significant differences in two variables: inferior lip variables in both sexes, and a greater prominence of the cheekbone in Chilean women, therefore we consider that the values of harmony of Arnett, can also be applied as an aesthetic parameter for the Chilean population.

Intraoral Photography Recommendations for Remote Risk Assessment and Monitoring of Oral Mucosal Lesions.

Oral cancer is a global health issue with substantial morbidity and a high mortality rate mainly because of late-stage diagnosis. Cancerous lesions are often preceded by potentially malignant lesions that may be detected during routine dental examinations. Not only is the oral cavity easily accessible for screening, but the clinical risk factors of the disease are also known. However, patients may not always be able to access screening services or receive follow-up for diagnosed lesions. In these circumstances, intraoral photos are crucial for timely triage, risk assessment, and monitoring of oral lesions. Further, photos form an integral part of a patient's records, facilitate patient education and communication between health care providers, and provide important information during the referral process. To ensure that intraoral photos are of good quality and standardised there is a need to establish recommendations regarding intraoral photography in oral mucosal screening. This article recommends methods to help health professionals and patients obtain interpretable intraoral photographs. Suggestions to achieve ideal lighting, mirror placement, camera angle, and retraction have been discussed. These recommendations are adaptable to easily available smartphone or point-and-shoot cameras and may be further used to develop future teledentistry platforms.