Modeling brain pathology to study nose-to-brain drug delivery.

OBJECTIVES: To create a new mucoadhesive dosage form based on PluronicF127 followed by transformation into a gel form upon intranasal administration for targeted delivery to brain tissueMETHODS: Citicoline, cytidine diphosphocholine, designated as CDP-choline, was purchased as a white powder with the molecular weight of 510.31 g/mol. The triblock copolymers of polyethylene glycol-block-polypropylene glycol-block-polyethylene glycol (PEG-PPG-PEG), branded as Pluronic F127, was used. RESULTS: When instilled into the nasal cavity, Pluronic F127 for intranasal administration is transformed into a gel that remains retained for 45-55 minutes, which promotes better penetration of drugs into the brain tissue. CONCLUSION: The polymer's gelling and adhesive properties performed well, which is crucial for further research at the preclinical stage (Tab. 1, Fig. 5, Ref. 28).

Lipid-based microemulsion gel for the topical delivery of methotrexate: an optimized, rheologically acceptable formulation with conducive dermatokinetics.

In the present study, we have formulated a methotrexate (MTX)-loaded microemulsion topical gel employing quality-by-design optimization. The optimized lipid-based microemulsion was incorporated into a 2% carbopol gel. The prepared formulation was characterized for micromeritics, surface charge, surface morphology, conductivity studies, rheology studies, texture analysis/spreadability, drug entrapment, and drug loading studies. The formulation was further evaluated for drug release and release kinetics, cytotoxicity assays, drug permeation and drug retention studies, and dermatokinetics. The developed nanosystem was not only rheologically acceptable but also offered substantial drug entrapment and loading. From drug release studies, it was observed that the nanogel showed higher drug release at pH 5.0 compared to plain MTX, plain gel, and plain microemulsion. The developed system with improved dermatokinetics, nanometric size, higher drug loading, and enhanced efficacy towards A314 squamous epithelial cells offers a huge promise in the topical delivery of methotrexate.

Comparison of stromal vascular fraction cell composition between Coleman fat and extracellular matrix/stromal vascular fraction gel.

As a mechanically condensed product of Coleman fat, extracellular matrix/stromal vascular fraction gel (ECM/SVF-gel) eliminates adipocytes, concentrates SVF cells, and improves fat graft retention. This study aims to compare SVF cell composition between Coleman fat and ECM/SVF-gel. Matched Coleman fat and ECM/SVF-gel of 28 healthy women were subjected to RNA-seq, followed by functional enrichment and cell-type-specific enrichment analyses, and deconvolution of SVF cell subsets, reconstructing SVF cell composition in the transcriptome level. ECM/SVF-gels had 9 upregulated and 73 downregulated differentially expressed genes (DEGs). Downregulated DEGs were mainly associated with inflammatory and immune responses, and enriched in fat macrophages. M2 macrophages, resting CD4+ memory T cells, M1 macrophages, resting mast cells, and M0 macrophages ranked in the top five most prevalent immune cells in the two groups. The proportions of the principal non-immune cells (e.g., adipose-derived stem cells, pericytes, preadipocytes, microvascular endothelial cells) had no statistical differences between the two groups. Our findings reveal ECM/SVF-gels share the same dominant immune cells beneficial to fat graft survival with Coleman fat, but exhibiting obvious losses of immune cells (especially macrophages), while non-immune cells necessary for adipose regeneration might have no significant loss in ECM/SVF-gels and their biological effects could be markedly enhanced by the ECM/SVF-gel's condensed nature.

Encapsulation of Alpinia leaf essential oil in nanophytosome-embedded gel as novel strategy to treat periodontal infections: evaluation of antimicrobial effectiveness, pharmacokinetic, in vitro-ex vivo correlation and in silico studies.

AIM: The work reports a novel nanophytosomal gel encapsulating Alpinia galanga (L.) Willd leaf essential oil to treat periodontal infections. METHODS: Alpinia oil-loaded nanophytosomes (ANPs) were formulated by lipid layer hydration technique and were evaluated by FESEM, cryo-TEM, loading efficiency, zeta potential, particle size, release profile etc. Selected ANPs-loaded gel (ANPsG) was evaluated by both in vitro and in vivo methods. RESULTS: Selected ANPs were spherical, unilamellar, 49.32 ± 2.1 nm size, 0.45 PDI, -46.7 ± 0.8 mV zeta potential, 9.8 ± 0.5% (w/w) loading, 86.4 ± 3.02% (w/w) loading efficiency with sustained release profile. ANPsG showed good spreadability (6.8 ± 0.3 gm.cm/sec), extrudability (79.33 ± 1.5%), viscosity (36522 ± 0.82 cps), mucoadhesive strength (44.56 ± 3.5 gf) with sustained ex vivo release tendency. Satisfied ZOI and MIC was observed for ANPsG against periodontal bacteria vs. standard/control. ANPsG efficiently treated infection in ligature induced periodontitis model. Key pharmacokinetic parameters like AUC, MRT, Vd were enhanced for ANPsG. CONCLUSION: ANPsG may be investigated for futuristic clinical studies.

Preparation of Controlled Multicompartmental Gel Microcarriers Based on Aqueous Two-Phase Emulsions for 3D Partitioned Cell Coculture In Vitro.

A facile method was proposed for preparing controllable multicompartment gel microcarriers using an aqueous two-phase emulsion system. By leveraging the density difference between the upper polyethylene glycol solution and the lower dextran-calcium chloride (CaCl2) solution in the collection solution and the high viscosity of the lower solution, controllable fusion of core-shell droplets made by coextrusion devices was achieved at the water/water (w/w) interface to fabricate microcarriers with separated core compartments. By adjusting the sodium alginate concentration, collected solution composition, and number of fused liquid droplets, the pore size, shape, and number of compartments could be controlled. Caco-2 and HepG2 cells were encapsulated in different compartments to establish gut-liver coculture models, exhibiting higher viability and proliferation compared to monoculture models. Notably, significant differences in cytokine expression and functional proteins were observed between the coculture and monoculture models. This method provides new possibilities for preparing complex and functional three-dimensional coculture materials.

Physicochemical and Biological Properties of Vancomycin-Containing Antibacterial Polysaccharide Gels for Biocomposite Bone Implant Impregnation.

Polymeric drugs containing up to 60% by weight of the antibiotic vancomycin were synthesized based on dextran carriers activated with epichlorohydrin. Vancomycin was covalently bound, involving the primary amino group of the molecule through the hydroxypropyl radical to the C6 position of the anhydroglucose units of the dextran main chain. Covalent binding is necessary to prevent spontaneous release of the antibiotic from the gel, thereby reducing the risk of bacterial multiresistance. Antibacterial depot gels were obtained from those polymers, containing up to 17.5% by weight of polysaccharide with a cross-linking density of q = 3-5 nodes per macromolecule for the deposition of another type of drugs not covalently bound to the polymer gel. They were used to coat the surface of the internal pores of biocomposite bone implants based on bovine cancellous bone used in orthopedics. The chemical structure of the polymer was studied using 13C NMR spectroscopy and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry. The stiffness of the gels was evaluated by the values of the accumulation modulus G' = 170-270 kPa and the loss modulus G″ = 3.7-4.2 kPa determined on a rheometer. Their values are close to those typical for materials used to replace soft tissue in plastic surgery. The minimum inhibitory concentration of the gels against Staphylococcus aureus P209 depends on the antibiotic content in the polymer. It equals 2.5 mg/L for vancomycin we used and 100 mg/L for a polymer containing 50% by weight of covalently bound antibiotic. The cytotoxic concentration measured with cell culture HEK 293T exceeds 1200 mg/L in 24 h exposure. The release dynamics of drugs not covalently bound to dextran from the depot gel were studied using fluorescein as a model. The release time is independent of the gel density and lasts up to 6 days for a 2 mm thick layer. Both the gel and the bone implants impregnated with it maintained consistently high antibacterial activity throughout the experiment, up to its completion after 168 h, with the local concentration of the released antibiotic at the site of bacterial attack exceeding the therapeutic level by 200 times.

Integration of N- and P- elements in sodium alginate aerogels for efficient flame retardant and thermal insulating properties.

In the field of building energy conservation, the development of biodegradable biomass aerogels with excellent mechanical performance, flame retardancy and thermal insulation properties is of particular importance. Here, a directional freeze-drying method was used for fabricating composite sodium alginate (SA) aerogels containing functionalized ammonium polyphosphate (APP) flame retardant. In particular, APP was coated with melamine (MEL) and phytic acid (PA) by a supramolecular assembly process. Through optimizing the flame retardant addition, the SA-20 AMP sample exhibited excellent flame retardant and thermal insulation properties, with the limiting oxygen index of 38.2 % and the UL-94 rating of V-0. Such aerogels with anisotropic morphology demonstrated a low thermal conductivity of 0.0288 (W/m·K) in the radial direction (perpendicular to the lamellar structure). In addition, as-obtained aerogels displayed remarkable water stability and mechanical properties, indicating significant potential for practical applications.

Organic solvents-free and ambient-pressure drying melamine formaldehyde resin aerogels with homogeneous structures, outstanding mechanical strength and flame retardancy.

Atmospheric drying method for fabricating aerogels is considered the most promising way for casting aerogels on a large scale. However, the organic solvent exchange, remaining environmental pollution risk, is a crucial step in mitigating the impact of surface tension during the atmospheric drying process, especially for wet gel formed through the alkoxy-derived sol-gel process, such as melamine-formaldehyde resin (MF) aerogel. Herein, a tough polymer-assisted in situ polymerization was proposed to fabricate MF resin aerogel with a combination of mechanical toughness and strength, enabling it to withstand the capillary force during water evaporation. The monolithic MF resin aerogel through the sol-gel method can be directly prepared without additional network strengthening or organic solvent exchange. The resulting MF resin aerogel exhibits a homogeneous as well as hierarchical structure with macropores and mesopores (~6 µm and ~5 nm), high compressive modulus of 31.8 MPa, self-extinguishing property, and high-temperature thermal insulation with 97 % heat decrease for butane flame combustion. This work presents a straightforward and environmentally friendly method for fabricating MF resin aerogels with nanostructures and excellent performance in open conditions, exhibiting various applications.

Novel organic-inorganic composite pea protein silica food-grade aerogel materials: Fabrication, mechanisms, high oil-holding property and curcumin delivery capacity.

The fragility of the skeleton and poor bioaccessibility limit Silica aerogel's application in the food industry. In this study, composite gels were obtained by cross-linking pea proteins isolate (PPI) with Tetraethoxysilane (TEOS)to improve the bioavailability of silica-derived aerogels. It indicated that TEOS first condensed with H+ to form secondary particles and then complexed with PPI via hydroxyl groups to form a composite aerogel. Meanwhile, the PPI-Si composite aerogel formed a dense mesoporous structure with a specific surface area of 312.5 g/cm3. This resulted in a higher oil holding percentage of 89.67 % for the PPI (10 %)-Si aerogel, which was 34.1 % higher than other studies, leading to a more stable oleogel. Finally, as a delivery system, the composite oleogel not only could significantly increase the bioaccessibility rate by 27.4 % compared with silica aerogel, but also could efficiently inhibit the premature release of curcumin in the simulated gastric fluids, while allowed sustainably release in the simulated intestinal fluids. These results provided a theoretical basis for the application of silica-derived aerogels in food and non-food applications.

Potentials of Ulva spp.-derived sulfated polysaccharides as gelling agents with promising therapeutic effects.

Ulvan, a sulfated polysaccharide extracted from Ulva spp., has garnered significant attention in the food and pharmaceutical industries due to its potential health benefits. These include immunomodulation, antiviral, anti-inflammatory, anti-hyperlipidemic, and anti-cancer effects. Nonetheless, practical applications in these fields remain limited due to an incomplete understanding of its gelation mechanisms. Additionally, the underlying mechanisms of its gelation have not been completely understood and thoroughly reviewed. The primary objective is to provide current insights into ulvan's gelling mechanisms and potential health impacts. This review also delves into the existing applications of ulvan polysaccharides. By unraveling these aspects, the information provided in this work is expected to deepen our understanding of ulvan's gelation mechanisms and its prospective role in enhancing health, holding promise for advancements in the fields of food science and disease prevention. This work's theoretical insights contribute significantly to a deeper understanding of these aspects, which holds paramount importance in unleashing the full potential of ulvan and elevating its scientific significance.

Double-drying 3D lamellar-structured aerogel membrane for efficient oil-water separation and long-lasting antibacterial activity.

Conventional oil-water separation membranes are difficult to establish a trade-off between membrane flux and separation efficiency, and often result in serious secondary contamination due to their fouling issue and non-degradability. Herein, a double drying strategy was introduced through a combination of oven-drying and freeze-drying to create a super-wettable and eco-friendly oil-water separating aerogel membrane (TMAdf). Due to the regular nacre-like structures developed in the drying process and the pores formed by freeze-drying, TMAdf aerogel membrane finally develops regularly arranged porous structures. In addition, the aerogel membrane possesses excellent underwater superoleophobicity with a contact angle above 168° and antifouling properties. TMAdf aerogel membrane can effectively separate different kinds of oil-water mixtures and highly emulsified oil-water dispersions under gravity alone, achieving exceptionally high flux (3693 L·m-2·h-1) and efficiency (99 %), while being recyclable. The aerogel membrane also displays stability and universality, making it effective in removing oil droplets from water in corrosive environments such as acids, salts and alkalis. Furthermore, TMAdf aerogel membrane shows long-lasting antibacterial properties (photothermal sterilization up to 6 times) and biodegradability (completely degraded after 50 days in soil). This study presents new ideas and insights for the fabrication of multifunctional membranes for oil-water separation.

Functionalized nano cellulose double-template imprinted aerogel microsphere for the targeted enrichment of taxanes.

Paclitaxel, a diterpenoid isolated from the bark of Taxus wallichiana var. chinensis (Pilger) Florin, is currently showing significant therapeutic effects against a variety of cancers. Baccatin III (Bac) and 10-Deacetylbaccatin III (10-DAB) are in great demand as important precursors for the synthesis of paclitaxel. This work aims to develop a simple, rapid and highly selective, safe, and non-polluting molecularly imprinted material for 10-DAB and Bac enrichment. In this study, we innovatively prepared molecularly imprinted materials with nanocellulose aerogel microspheres and 2-vinylpyridine (2-VP) as a bifunctional monomer, and 10-DAB and Bac as bis-template molecules. In particular, functionalized nanocellulose dual-template molecularly imprinted aerogel microsphere (FNCAG-DMIM) were successfully synthesized by the bifunctional introduction of functional nanocellulose aerogel microsphere (FNCAG) modified with Polyethyleneimine (PEI) as a carrier and functional monomer, which provided a large number of recognition sites for bimodal molecules. FNCAG-DMIM showed high specificity for 10-DAB and Bac specific assays. Under the optimal experimental conditions, the adsorption capacities of FNCAG-DMIM for 10-DAB and Bac reached 52.27 mg g-1 and 53.81 mg g-1, respectively. In addition, it showed good reliability and practicality in the determination of real samples. The present study extends the research on the synthesis of natural functional monomers by molecularly imprinted materials and opens up new horizons for the targeted isolation of plant compounds by dual-template molecularly imprinted materials.

An Optical Reusable 2D Radiochromic Gel-Based System for Ionising Radiation Measurements in Radiotherapy.

This work describes the development of a reusable 2D detector based on radiochromic reaction for radiotherapy dosimetric measurements. It consists of a radiochromic gel dosimeter in a cuboidal plastic container, scanning with a flatbed scanner, and data processing using a dedicated software package. This tool is assessed using the example of the application of the coincidence test of radiation and mechanical isocenters for a medical accelerator. The following were examined: scanning repeatability and image homogeneity, the impact of image processing on data processing in coincidence tests, and irradiation conditions-monitor units per radiation beam and irradiation field are selected. Optimal conditions for carrying out the test are chosen: (i) the multi-leaf collimator gap should preferably be 5 mm for 2D star shot irradiation, (ii) it is recommended to apply ≥2500-≤5000 MU per beam to obtain a strong signal enabling easy data processing, (iii) Mean filter can be applied to the images to improve calculations. An approach to dosimeter reuse with the goal of reducing costs is presented; the number of reuses is related to the MUs per beam, which, in this study, is about 5-57 for 30,000-2500 MU per beam (four fields). The proposed reusable system was successfully applied to the coincidence tests, confirming its suitability as a new potential quality assurance tool in radiotherapy.

Construction of Dome-Shaped 3D Corneal Epithelial Tissue Models Based on Eyeball-Shaped Gel Microspheres.

By overcoming interspecies differences and mimicking the in vivo microenvironment, three-dimensional (3D) in vitro corneal models have become a significant novel tool in contemporary ophthalmic disease research. However, existing 3D corneal models struggle to replicate the actual human corneal environment, especially the dome-shaped physiological structure with adjustable curvature. Addressing these challenges, this study introduces a straightforward method for fabricating collagen/chitosan-alginate eyeball-shaped gel microspheres with a Janus structure via a two-phase aqueous system, used subsequently to construct in vitro 3D corneal epithelial tissue models. By adjusting the diameter ratio of collagen/chitosan to alginate droplets, we can create eyeball-shaped gel microspheres with varying curvatures. Human corneal epithelial cells were seeded on the surfaces of these microspheres, leading to the formation of in vitro 3D corneal epithelial tissues characterized by dome-like multilayers and tight junctions. Additionally, the model demonstrated responsiveness to UVB exposure through the secretion of reactive oxygen species (ROS) and proinflammatory factors. Therefore, we believe that in vitro 3D corneal epithelial tissue models with dome-shaped structures hold significant potential for advancing ophthalmic research.

Bone Marrow Aspirate Concentrate Combined with Ultra-Purified Alginate Bioresorbable Gel Enhances Intervertebral Disc Repair in a Canine Model: A Preclinical Proof-of-Concept Study.

Although discectomy is commonly performed for lumbar intervertebral disc (IVD) herniation, the capacity for tissue repair after surgery is limited, resulting in residual lower back pain, recurrence of IVD herniation, and progression of IVD degeneration. Cell-based therapies, as one-step procedures, are desirable for enhancing IVD repair. This study aimed to investigate the therapeutic efficacy of a combination of newly developed ultra-purified alginate (UPAL) gel and bone marrow aspirate concentrate (BMAC) implantation for IVD repair after discectomy. Prior to an in vivo study, the cell concentration abilities of three commercially available preparation kits for creating the BMAC were compared by measuring the number of bone marrow mesenchymal stem cells harvested from the bone marrow of rabbits. Subsequently, canine-derived BMAC was tested in a canine model using a kit which had the highest concentration rate. At 24 weeks after implantation, we evaluated the changes in the magnetic resonance imaging (MRI) signals as well as histological degeneration grade and immunohistochemical analysis results for type II and type I collagen-positive cells in the treated IVDs. In all quantitative evaluations, such as MRI and histological and immunohistochemical analyses of IVD degeneration, BMAC-UPAL implantation significantly suppressed the progression of IVD degeneration compared to discectomy and UPAL alone. This preclinical proof-of-concept study demonstrated the potential efficacy of BMAC-UPAL gel as a therapeutic strategy for implementation after discectomy, which was superior to UPAL and discectomy alone in terms of tissue repair and regenerative potential.

Amphiphilic NLC-Gel formulation loaded with Sebacoyl dinalbuphine ester and Nalbuphine for localized postoperative pain management.

Opioids are powerful analgesics; however, their significant systemic adverse effects and the need for frequent administration restrict their use. Nalbuphine (NA) is a κ-agonist narcotic with limited adverse effects, but needs to be frequently administrated due to its short elimination half-life. Whereas sebacoyl dinalbuphine ester (SDE) is a NA prodrug, which can effectively prolong the analgesic effect, but lacks immediate pain relief. Therefore, in this study, a rapid and sustained local delivery formulation to introduce NA and SDE directly into surgical sites was developed. An amphiphilic nanostructured lipid carrier (NLC) poloxamer 407 (P407) gel (NLC-Gel) was developed to permit concurrent delivery of hydrophobic SDE from the NLC core and hydrophilic NA from P407, offering a dual rapid and prolonged analgesic effect. Benefiting from the thermal-sensitive characteristic of P407, the formulation can be injected in liquid phase and instantly transit into gel at wound site. NLC-Gel properties, including particle size, drug release, rheology, and stability, were assessed. In vivo evaluation using a rat spinal surgery model highlighted the effect of the formulation through pain behavior test and hematology analysis. NLC-Gels demonstrated an analgesic effect comparable with that of commercial intramuscular injected SDE formulation (IM SDE), with only 15 % of the drug dosage. The inclusion of supplemental NA in the exterior gel (PA12-Gel + NA) provided rapid drug onset owing to swift NA dispersion, addressing acute pain within hours along with prolonged analgesic effects. Our findings suggest that this amphiphilic formulation significantly enhanced postoperative pain management in terms of safety and efficacy.

Clinical use of 0.1% polyhexanide and propylbetaine on acute and hard-to-heal wounds: a literature review.

OBJECTIVE: To summarise the findings on the effect of the clinical use of 0.1% polyhexanide-propylbetaine (PHMB/betaine) solution/gel on acute and hard-to-heal (chronic) wound healing. METHOD: A literature search was conducted in MEDLINE, CINAHL, Embase, Scopus and the CENTRAL Trials Registry of the Cochrane Collaboration. Paired reviewers conducted title and abstract screening and full-text screening to identify experimental, quasi-experimental and observational studies. Study quality and risk of bias were not formally evaluated. RESULTS: A total of 17 studies met the eligibility criteria. The findings from 12 studies indicated that the use of 0.1% PHMB/betaine solution/gel had: a low risk of contact sensitivity; could help debridement during wound cleansing; aided effective wound bed preparation; reduced wound size, odour and exudate; improved pain control; reduced microbial load; and enhanced wound healing. The results of three studies indicated that both 0.1% PHMB and saline solution were effective in reducing bacterial load, while another showed that adding 0.1% PHMB to tie-over dressings had no effect on reducing bacterial loads in wounds. Another study concluded that disinfection and granulation of pressure ulcers with hydrobalance dressing with 0.3% PHMB was faster and more effective than using 0.1% PHMB/betaine. CONCLUSION: The findings of this literature review showed that 0.1% PHMB/betaine solution/gel appeared to be useful and safe for wound cleansing, was effective in removing soft debris and slough from the wound bed, and created a wound environment optimal for healing. Although these actions cannot be attributed solely to this treatment modality, these results do highlight the unique action of this combined product. However, more robust studies are needed to confirm these results.

Dual-Ligand Europium-Organic Gels as a Highly Efficient Anodic Annihilation Electrochemiluminescence Emitter for Ultrasensitive Detection of MicroRNA.

In this study, a novel europium dual-ligand metal-organic gel (Eu-D-MOGs) with high-efficient anodic annihilation electrochemiluminescence (ECL) was synthesized as an ECL emitter to construct a biosensor for ultrasensitive detection of microRNA-221 (miR-221). Impressively, compared to the ECL signal of europium single-ligand metal-organic gels (Eu-S-MOGs), the ECL signal of Eu-D-MOGs was significantly improved since the two organic ligands could jointly replace the H2O and coordinate with Eu3+, which could remarkably reduce the nonradiative vibrational energy transfer caused by the coordination between H2O and Eu3+ with a high coordination demand. In addition, Eu-D-MOGs could be electrochemically oxidized to Eu-D-MOGs•+ at 1.45 V and reduced to Eu-D-MOGs•- at 0.65 V to achieve effective annihilation of ECL, which overcame the side reaction brought by the remaining emitters at negative potential. This benefited from the annihilation ECL performance of the central ion Eu3+ caused by its redox in the electrochemical process. Furthermore, the annihilation ECL signal of Eu3+ could be improved by sensitizing Eu3+ via the antenna effect. In addition, combined with the improved rolling circle amplification-assisted strand displacement amplification strategy (RCA-SDA), a sensitive biosensor was constructed for the sensitive detection of miR-221 with a low detection limit of 5.12 aM and could be successfully applied for the detection of miR-221 in the lysate of cancer cells. This strategy offered a unique approach to synthesizing metal-organic gels as ECL emitters without a coreactant for the construction of ECL biosensing platforms in biomarker detection and disease diagnosis.