Continuous-Flow High-Pressure Homogenization of Blueberry Juice Enhances Anthocyanin and Ascorbic Acid Stability during Cold Storage.

Blueberries (Vaccinium section Cyanococcus) have a wealth of bioactive compounds, including anthocyanins and other antioxidants, that offer significant health benefits. Preserving these compounds and maintaining the sensory and nutritional qualities of blueberry products such as juice during cold market storage is critical to meet consumer expectations for nutritious, safe, and minimally processed food. In this study, we compared the effects of two preservation processing techniques, high-temperature short-time (HTST) and continuous flow high-pressure homogenization (CFHPH), on blueberry juice quality during storage at 4 °C. Our findings revealed that inlet temperature (Tin) of CFHPH processing at 4 °C favored anthocyanin retention, whereas Tin at 22 °C favored ascorbic acid retention. After 45 days of storage, CFHPH (300 MPa, 1.5 L/min, 4 °C) juice retained up to 54% more anthocyanins compared to control at 0 day. In contrast, HTST treatment (95 °C, 15 s) initially increased anthocyanin concentrations but led to their subsequent degradation over time, while also significantly degrading ascorbic acid. Furthermore, CFHPH (300 MPa, 4 °C) juice had significantly lower polyphenol oxidase activity (>80% less than control), contributing to the overall quality of the juice. This innovative processing technique has the potential to improve commercial blueberry juice, and help meet the rising demand for healthy and appealing food choices.

Comparison of different drying technologies for kiwifruit pomace: Changes in physical characteristics, nutritional properties and antioxidant capacities.

The objective of this study was to evaluate the impacts of different drying technologies including microwave drying (MD), vacuum microwave drying (VMD), sun drying (SD), vacuum drying (VD), hot air drying (HAD), and vacuum freeze drying (VFD) on the physical characteristics, nutritional properties and antioxidant capacities of kiwifruit pomace in order to realize by-product utilization and improve energy efficiency. Results showed that both MD and VMD significantly reduced drying time by >94.6%, compared to traditional thermal drying which took 14-48 h. MD exhibited the highest content of soluble dietary fiber (9.5%) and the lowest energy consumption. Furthermore, VMD resulted in the highest content of vitamin C (198.78 mg/100 g) and reducing sugar (73.78%), and the antioxidant capacities ranked only second to VFD. Given the financial advantages and product quality, VMD was suggested to be advantageous technology in actual industrial production.

Ultrasound-assisted extraction of oil from hempseed (Cannabis sativa L.): Part 1.

BACKGROUND: Ultrasound-assisted extraction of the intermediate product from the mechanical expression of hemp (Cannabis sativa L.) seed oil was investigated to improve the overall expression yield without compromising oil quality. Complementary ultrasound technology was used as an out-of-line treatment carried out at 20 kHz frequency and optimized with respect to amplitude (80 and 152 µm), sonication time (2, 10, 20 min) and to the hemp paste properties, in particular its particle size and hydration, which drive the compressibility of the press cake. RESULTS: Under the conditions evaluated, the optimal ultrasound treatment was found to be the one applied on the hydrated press cake for 2 min at 152 µm, which resulted in an oil yield of 13.4%, with an increase in extraction efficiency equal to 73% with respect to the control (untreated press cake). Sonication had a positive effect on the press cake texture and on the extracted oil antioxidant activity. Soaked samples treated for 2 min at 152 µm yielded the lowest hardness. Oil recovered from soaked samples treated at 80 µm and 152 µm ultrasound for 2 min had the highest antioxidant capacity. CONCLUSIONS: The technological results gathered in the present investigation are preliminary to the design and engineering of scaled-up equipment that combines the mechanical screw expression and the in-line ultrasound unit. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Heat treatment improves the sensory properties of the ultrafiltration by-product of honeybush (Cyclopia genistoides) extract.

BACKGROUND: Ultrafiltration of green honeybush (Cyclopia genistoides) extract results in a by-product (retentate). Application of further separation processes for recovery of polyphenols would entail creation of additional waste. Repurposing the retentate as a food flavour ingredient provides an alternative valorization approach. RESULTS: The retentate, suspended in water (270 g L-1 ), was heat-treated at 80 °C for 2, 4, 8 and 16 h, and at 90 °C for 2, 4, 6 and 8 h to change its sensory profile. The heat-treated retentate, diluted to beverage strength (2.15 g L-1 ), had prominent 'grape/Muscat-like' and 'marmalade/citrus' aroma and flavour notes. Overall, heating for ≤ 4 h increased the intensities of positive flavour and aroma notes, while reducing those of 'green/grass', 'hay' and bitterness, whereafter further heating only had a slight effect on the aroma profile at 80 °C (P < 0.05), but not at 90 °C (P ≥ 0.05). The heat treatments, 80 °C/4 h and 90 °C/4 h, were subsequently applied to different batches of retentate (n = 10) to accommodate the effect of natural product variation. Heating at 90 °C produced higher intensities of positive aroma attributes (P < 0.05), but was more detrimental to the phenolic stability, compared to 80 °C. CONCLUSION: After heat treatment, the phenolic content of C. genistoides retentate, reconstituted to beverage strength, still fell within the range of a typical 'fermented' (oxidized) honeybush leaf tea infusion. The change in phenolic composition will not diminish the benefit of an improved sensory profile for the retentate by-product through heating. © 2021 Society of Chemical Industry.

Effect of ultrasound pretreatment on the functional and antioxidant properties of fermented and germinated Lupin protein isolates grafted with glucose.

BACKGROUND: This study examined the functional and antioxidant properties of Maillard reaction (MR) products of lupin protein isolate (LPI), fermented (FLPI), and germinated (GLPI) with glucose (G), treated with ultrasound (US) at different power levels (20-40-60-80%) for 15 min. The MR was conducted in a water bath for 180 min at 90 °C. RESULTS: The Trolox-equivalent antioxidant capacity (TEAC) values were found to be 46.79%, 56.43%, and 35.56% for the control (C), 58.99%, 80.17%, and 69.73% for conjugates of LPI-G, FLPI-G, and GLPI-G treated at 80% US, respectively. The maximum 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity of LPI-G, FLPI-G, and GLPI-G was found to be 39.68%, 59.54%, and 48.41%, respectively after 80% US. The FLPI-G sample showed the highest antioxidant activity compared with the samples treated at the same power level for DPPH and TEAC. The Fe-chelating activity of GLPI-G showed significant differences when compared with FLPI-G. The solubility of LPI-G, FLPI-G, and GLPI-G increased with increasing US power. The highest solubility was 74.29% for 80% US-treated GLPI-G. The emulsifying activity index (EAI) increased at 20% US and decreased with further increase in the US power. The EAI and emulsifying stability index (ESI) were negatively affected by the MR and US processes. CONCLUSION: The findings of current study proved that conjugation of LPI with G with the MR and with US pretreatment is an effective method for improving the bio- and techno-functional properties of LPI. It is therefore likely that the properties of plant proteins modified by biochemical and physical treatments may widen their applications in the food industry. © 2021 Society of Chemical Industry.

Use of the abrasion technique in minimal processing as an alternative to increase purchase acceptability and minimize browning in yam.

BACKGROUND: The present study investigated the sensory acceptance, oxidative damage and protection, and possible anatomical-structural damage of cells from the surface of shapes of minimally processed yam. The tubers were minimally processed into the peeled rondelle, dice and 'chateau cut' (chateau) shapes, the latter of which was obtained after performing the abrasion technique. Control treatment corresponded to the rondelle shape with the periderm. The pieces were kept packed at 5 ± 2 °C for 14 days. RESULTS: Peeled rondelle and chateau were sensorially the most well-accepted yam shapes and achieved the highest purchase intention. The enzymes were partially modulated by the detected H2 O2 levels. Oxidative burst lasted longer in the minimally processed tissues than in the control. Polyphenol oxidase activity showed a clear difference in behavior between the minimally processed pieces and the control. Minimal processing induced transient increases in phenolic compounds, for which the expression was lowest in the abraded pieces. On the other hand, these pieces exhibited greater cell collapse on the surface of the amyliferous parenchyma. CONCLUSION: Based on the results of the trained panel, the abrasion technique is an alternative to provide shapes that are better accepted and marketable, more resistant to browning, and can be stored for up to 12 days. Resistance to browning may be related to a more efficient modulation of enzymatic antioxidant systems and intense deposition of cell debris on the surface of the amyliferous parenchyma. © 2021 Society of Chemical Industry.

Influence of coffee brewing methods on the chromatographic and spectroscopic profiles, antioxidant and sensory properties.

Cold brewing coffee has gained increasing popularity as a novel brewing method. A completely different flavour profile during cold brewing extraction (smooth and mild) is a result of the low-energy process, prolonged water-grind contact times and long preparation time. The aim of our research was to compare coffee drinks obtained with an innovative device for a faster, dynamic cold coffee extraction process (Hardtank) to drinks prepared traditionally in 24 h and hot brewed drinks. This study investigated the differences in chemical composition (volatile, non-volatile and lipid compounds), sensory properties and antioxidant capacity of coffee drinks from various extraction processes carried out at variable brewing temperatures, times and percolation modes. The results showed that the new cold maceration technique using coffee bed percolation (Hardtank) improved the quality of cold coffee drinks, making them similar in taste to hot coffee drinks. Among the studied extractions, the combination of a lower temperature (19.3 °C) and percolation process appeared to be the ideal setting for the most efficient extraction of compounds such as chlorogenic acids, gallic acid, caffeine, trigonelline, 5-(hydroxymethyl)furfural and lipids and consequently for their intake. In addition, FTIR spectra indicated an even 4 times greater quantity of lipids in Hardtank drinks than in classic cold brew and up to 5 times more lipids than in hot brew coffee, which contribute to the formation of the aroma and flavour. The decreased extraction time and use of coffee bed percolation could be beneficial for the quality and taste of cold brew products.

Reduction in flavor-intense components in fish protein hydrolysates by membrane filtration.

Enzymatic protein hydrolysates based on side stream materials from the fish-filleting industry are increasingly explored as food ingredients. However, intense sensory properties, and high salt contents, are often a limiting factor. Most of the sensory attributes, such as fish flavor and salty taste, can be ascribed to low-molecular-weight, water-soluble components, whereas bitterness is associated with small hydrophobic peptides. In this study, protein hydrolysates based on head and backbone residuals from Atlantic salmon (Salmo salar) and Atlantic cod (Gadus morhua) were produced using two different enzymes. The effects of micro- and nanofiltration on the chemical composition, protein recovery, and sensory properties of the final products were investigated. The choice of raw material and enzyme had negligible effects, whereas nanofiltration caused a considerable reduction in metabolites, ash, and the intensity of several sensory attributes. The intensity of bitterness increased after nanofiltration, indicating that small peptides associated with bitter taste were retained by the membrane. Total protein yield after microfiltration was 24%-29%, whereas 19%-24% were recovered in the nanofiltration retentate. PRACTICAL APPLICATION: Enzymatic protein hydrolysates can be included in food products to increase the protein content, and as a nutritional supplement and/or functional ingredient; however, unpalatable and intense flavors limit applications. This study investigated the use of membrane filtration to improve flavor quality and reduce salt content in fish protein hydrolysates. Although some protein loss is unavoidable in micro- and nanofiltration, this study demonstrates the production of fish protein hydrolysates with >90% protein and peptide content, which is suitable for inclusion in foods.

Influence of upper limb training and analyzed muscles on estimate of physical activity during cereal grinding using saddle quern and rotary quern.

Experimental grinding has been used to study the relationship between human humeral robusticity and cereal grinding in the early Holocene. However, such replication studies raise two questions regarding the robusticity of the results: whether female nonathletes used in previous research are sufficiently comparable to early agricultural females, and whether previous analysis of muscle activation of only four upper limb muscles is sufficient to capture the stress of cereal grinding on upper limb bones. We test the influence of both of these factors. Electromyographic activity of eight upper limb muscles was recorded during cereal grinding in an athletic sample of 10 female rowers and in 25 female nonathletes and analyzed using both an eight- and four-muscle model. Athletes had lower activation than nonathletes in the majority of measured muscles, but except for posterior deltoid these differences were non-significant. Furthermore, both athletes and nonathletes had lower muscle activation during saddle quern grinding than rotary quern grinding suggesting that the nonathletes can be used to model early agricultural females during saddle and rotary quern grinding. Similarly, in both eight- and four-muscle models, upper limb loading was lower during saddle quern grinding than during rotary quern grinding, suggesting that the upper limb muscles may be reduced to the previously used four-muscle model for evaluation of the upper limb loading during cereal grinding. Another implication of our measurements is to question the assumption that skeletal indicators of high involvement of the biceps brachii muscle can be interpreted as specifically indicative of saddle quern grinding.

Stability of refrigerated traditional and liquid smoked catfish (Sciades herzbergii) sausages.

Catfish (Sciades herzbergii) are widely captured in Brazilian Northeast but have low commercial value. The processing of catfish into an innovative product with longer shelf life can add value to the fish and improve sustainability. The objective of this study was to investigate the stability during 60 days of refrigerated storage smoked sausages produced by two different smoking processes (traditional smoking [TS] and liquid smoking [LS]). The smoking processes affected fat and ash contents, hardness, and CIE (Commission Internationale de L'Eclairage) color (L* and b* values). TS sausages had higher fat content and yellowness (b* value). LS sausages had higher ash content (15 days of storage) and lightness (L* value). The sausage's hardness was higher at 45 days of storage for TS and at 60 days for LS sausages. During refrigerated storage, there were decreases in crude protein (309.12-263.49 g/kg, 1-30 days, respectively), water holding capacity (89.77%-87.39%, 1-45 days, respectively), and redness (a* value) (10.35-6.09, 1-30 days, respectively), and increases in hardness (TS = 31.92-55.92 N, 1-45 days, respectively; LS = 32.88-61.18N, 160 days, respectively) and TBARS values (1.56-2.38 mg malonaldehyde/kg, 1-60 days, respectively). The microbial quality was kept within Brazilian legislation limits. Therefore, liquid smoked catfish sausage consists of a convenient innovative product, which is easier to process and control and provides a product with good physicochemical, microbial, and biochemical characteristics for up to 60 days of storage. PRACTICAL APPLICATION: Catfish, a low commercial value fish (by catch from shrimp operations), can be processed into a high value smoked sausage. Liquid smoking was easier to process, environment friendly, and easier to control compared to traditional smoking. It provided a nutritional, easy to prepare at home, and microbial safe product with a shelf life under refrigeration up to 60 days. It can be successfully used to warrant sustainability in the fish chain.

Prediction of mechanical extraction oil yield of new sunflower hybrids: artificial neural network model.

BACKGROUND: Sunflower seeds are in the top five most abundant oilseeds in the world, as well as sunflower oil in the edible oils group. Recently, increasing attention has been paid to cold-pressed sunflower oil because less processing is involved and no solvent is used. The present study was carried out to investigate dimensions (length, width, thickness), firmness, general (moisture content and hull content, mass of 1000 seeds), gravimetric (true and bulk density, porosity) and geometric characteristics (equivalent diameter, surface area, seed volume, sphericity) of 20 new sunflower hybrid seeds. Steps to determine most of these parameters are quite simple and easy since the process does not require long time or special equipment. RESULTS: Principal component analysis and cluster analysis confirmed differences in the mentioned characteristics between oily and confectionary sunflower hybrid seeds. One of the major differences between two groups of samples was in extraction oil yield. Mechanical extraction oil yield of the oily hybrid seeds was significantly (P Ë‚ 0.05) higher (from 68.72 ± 4.21% to 75.61 ± 1.99%) compared to confectionary hybrids (from 20.10 ± 2.82% to 39.91 ± 6.23%). Extraction oil yield values are known only after oil extraction. CONCLUSION: Knowledge of the extraction oil yield value before the mechanical extraction enables better management of the process. By application of the artificial neural network approach, an optimal neural network model was developed. The developed model showed a good generalization capability to predict the mechanical extraction oil yield of new sunflower hybrids based on the experimental data, which was a main goal of this paper. © 2021 Society of Chemical Industry.

Effects of salt and heat treatment on the physicochemical properties, microstructure, secondary structure, and simulated in vitro gastrointestinal digestion of duck egg white.

BACKGROUND: The texture and structure of the duck egg white (DEW) gel under salt and heat treatment are crucial to its digestibility. Specifically, the structural changes of food protein gels have been recognized for their potential to regulate in vitro digestion. In this study, the effects of gel characteristics and simulated in vitro gastrointestinal digestion of DEW under combined salt and heat treatment were investigated. RESULTS: With the increase in salting time and temperature, a porous opaque gel with large particles was formed, the moisture content of DEW showed a downward trend, and the same was true for hardness changes. The microstructure suggested that, with the penetration of NaCl, DEW proteins were denatured, and the protein molecules gradually unfolded and then aggregated after 7 days. The secondary structure revealed that, as the salting time and temperature increased, the proportion of intermolecular ß-sheets and α-helices decreased. In terms of in vitro digestion, the highest digestibility was obtained at 14 days of salting combined with 100 °C heat treatment, and the digestibility was the lowest when marinated for 7 days at 121 °C. Liquid chromatography and tandem mass spectrometry (LC-MS/MS) indicated that the number of different types of peptides and specific peptides was positively correlated with the salting time and temperature of the DEW at the end of gastric digestion. CONCLUSIONS: Heat treatment at 100 °C has a higher in vitro digestibility than at 121 °C. Gels with low hardness, large pores, and rough textures are easier to digest by pepsin and release more peptides. © 2021 Society of Chemical Industry.

Bacterial biofilm formation on stainless steel in the food processing environment and its health implications.

Biofilm formation (BF) and production in the food processing industry (FPI) is a continual threat to food safety and quality. Various bacterial pathogens possess the ability to adhere and produce biofilms on stainless steel (SS) in the FPI due to flagella, curli, pili, fimbrial adhesins, extra polymeric substances, and surface proteins. The facilitating environmental conditions (temperature, pressure, variations in climatic conditions), SS properties (surface energy, hydrophobicity, surface roughness, topography), type of raw food materials, pre-processing, and processing conditions play a significant role in the enhancement of bacterial adhesion and favorable condition for BF. Furthermore, biofilm formers can tolerate different sanitizers and cleaning agents due to the constituents, concentration, contact time, bacterial cluster distribution, and composition of bacteria within the biofilm. Also, bacterial biofilms' ability to produce various endotoxins and exotoxins when consumed cause food infections and intoxications with serious health implications. It is thus crucial to understand BF's repercussions and develop effective interventions against these phenomena that make persistent pathogens difficult to remove in the food processing environment.

How olive washing and storage affect fruit ethanol and virgin olive oil ethanol, ethyl esters and composition.

BACKGROUND: Olives are stored for a short time after harvesting pending processing in the oil mills. Furthermore, olives are often washed prior to fruit storage. In this work we study how washing and storage affect fruit ethanol content and the effect on virgin olive oil ethanol content and quality. RESULTS: Olive storage produced an increase in the fruit ethanol content, achieving values six times higher when storage was in silos. Washing the olives resulted in an increase in fruit ethanol content, although when washed olives were processed immediately no difference was found. The increase in fruit ethanol content during storage was reflected in higher oil ethanol concentration. Similarly, olive washing resulted in oils with higher ethanol concentration. Industrial conditions gave more important increases in oil ethanol content than that from olives processed by hand. For quality parameters all the olive oils were classified as 'extra virgin'. In general, oils showed a slight decrease in some sensory attributes. At industrial scale after 24 h storage oils were classified as 'virgin' because sensory defects were found. CONCLUSION: Olive storage should be avoided or reduced to less than 12 h; if possible, olives should not be washed before storage since this practice favors losses in sensory characteristics and the synthesis of ethanol, a precursor of ethyl esters. © 2020 Society of Chemical Industry.

Characterization of a flavonol-rich antioxidant fraction from Spondias purpurea L. pulp and the effect of its incorporation on cellulose acetate-based film.

BACKGROUND: Active packaging containing natural flavonoid has recently emerged as a result of its potential to inhibit the oxidation of foods by interacting with it and/or its surrounding environment, with the aim of counteracting oxidation reactions and extending the shelf-life of foods. The plant Spondias purpurea L. is widely found in northeastern Brazil and is known to contain bioactive flavonoids. The present study aimed to obtain a flavonoid-rich fraction from the pulp of S. purpurea L. and incorporate it into the cellulose acetate film to obtain biodegradable films with antioxidant properties. RESULTS: The fractionation in SiO2 open-column chromatography of the S. purpurea pulp crude extract furnished an antioxidant active fraction containing the flavonols quercetin 3-O-rutinoside and kaempferol 3-O-rutinoside as the major compounds. This active fraction was incorporated (10, 20 and 30 g kg-1 ) into the substance produced with the casting method for cellulose acetate films. The films produced were characterized concerning mechanical properties, water vapor permeability (WVP) and antioxidant activity. CONCLUSION: The incorporation of the active flavonoid fraction from S. purpurea in the cellulose acetate films decreases WVP and elongation at break, at the same time as increasing antioxidant activity, tensile strength and elastic modulus. Thus, the S. purpurea pulps may be an alternative as a source of antioxidants for use in cellulose acetate films. © 2020 Society of Chemical Industry.

Application of accelerating energies to the maceration of sherry vinegar with citrus fruits.

BACKGROUND: In the present work we propose the use of accelerating energies (microwaves and ultrasounds) to the maceration process of sherry vinegar with citrus fruit peels (orange and lemon). For the application of microwaves, an experimental design has been developed in order to optimize the maceration conditions. To evaluate the effect of these energies on the maceration, the volatile and polyphenolic content of the samples has been analyzed, as well as their sensory characteristics. RESULTS: Orange peel provided a higher number of volatile and polyphenolic compounds to the vinegar, while lemon's yielded a greater amount of some of them. The multivariate analysis showed that the samples macerated using microwaves were the most similar to the samples macerated in the traditional way. This aspect was corroborated by the sensory analysis, which was more noticeable when orange peel was used in the macerations. CONCLUSION: Therefore, it seems that the use of microwaves to accelerate maceration is a good alternative to the traditional method of making sherry vinegars macerated with citrus peel, since it cuts down the maceration time from 3 days to just a few minutes. © 2020 Society of Chemical Industry.

Fabrication of oil-in-water emulsions as shelf-stable liquid non-dairy creamers: effects of homogenization pressure, oil type, and emulsifier concentration.

BACKGROUND: The popularity of coffee, the second most consumed beverage in the world, contributes to the high demand for liquid non-dairy creamer (LNDC). In this study, palm olein emulsions (as LNDCs) were investigated as alternatives to the more common soybean oil-based LNDCs. LNDCs were prepared via different homogenization pressures (100-300 bar) using different types of oil (palm olein and soybean oil) and concentrations of DATEM emulsifier (5-20 g kg-1 ). RESULTS: Increases in homogenization pressure and emulsifier concentration were observed to have significant (P < 0.05) effects on the physicochemical properties (particle size, pH, and viscosity) of the LNDCs. Palm olein and soybean oil LNDCs prepared using 15 g kg-1 and 10 g kg-1 DATEM emulsifier, respectively, were determined to be the most stable (as observed throughout a 15-day storage period at ambient temperature of 28 ± 2 °C), with properties closest to those of a commercial LNDC. When added to black coffee, both LNDCs displayed a good whitening effect by increasing the L* value from 26.73 ± 0.16 (black coffee) to ≥40.82 ± 0.56 (black coffee + LNDCs). Sensory evaluation showed that there were no significant (P > 0.05) differences between the prepared and commercial LNDCs in terms of their color, appearance, and overall acceptability. CONCLUSION: Shelf-stable LNDCs with qualities comparable to commercial LNDC were successfully fabricated. Valuable insights into the effects of homogenization pressure, oil type, and emulsifier concentration, as well as functionality and consumer acceptance of the LNDCs when added into black coffee, were obtained. © 2020 Society of Chemical Industry.

Effects of superfine grinding using ball-milling on the physical properties, chemical composition, and antioxidant properties of Quercus salicina (Blume) leaf powders.

BACKGROUND: Quercus salicina (Blume) leaves are traditionally used as folk medicine in some Asian countries. The aim of this study was to evaluate the effects of ball milling for different periods (0, 6, 12, 18, and 24 h) on the physicochemical properties of superfine Quercus salicina (Blume) leaf (QSL) powders. RESULTS: The particle sizes, water-holding capacity, angle of repose, and redness of the superfine QSL powder decreased with increasing ball-milling times, whereas the water solubility index, bulk density, tapped density, brightness, and yellowness were found to increase. Significantly higher (P > 0.05) total phenolic and flavonoid contents, and antioxidant activities, were observed for the superfine QSL powders obtained after 24 h ball-milling time. A total of 12 phenolic compounds in free and cell-wall-bound forms were quantified in the superfine QSL powder. Free phenolics such as protocatechuic acid, caffeic acid, rutin, and p-coumaric acid were increased and all cell-wall-bound phenolics were decreased with increasing ball-milling times. The antioxidant activity of the free phenolics increased with increasing ball-milling times, and the cell-wall-bound forms decreased. CONCLUSION: Superfine grinding by ball milling for 24 h can thus be used to produce superfine QSL powder with higher free phenolic metabolite content and antioxidant activity, and improved water solubility index, color, bulk, and tapped densities. This study will be useful for the food / nutraceutical / pharmaceutical industries in the manufacturing of active food ingredients or value-added products using QSL powders. © 2020 Society of Chemical Industry.

Ionizing Radiation Technologies to Increase the Extraction of Bioactive Compounds from Agro-Industrial Residues: A Review.

Due to the growing demand in society for healthier foods, scientific communities are searching and developing new ingredients. In this context, agro-industrial residues, which can have a negative impact on the environment, represent a natural source for bioactive compounds and their recovery can contribute to economic and environmental sustainability. Ionizing radiation is a clean and eco-friendly technology that can be used to improve the extraction of bioactive compounds. The aim of this review, after presenting general aspects about bioactive compounds in agro-industrial residues and radiation technologies, is to focus on the effects of ionizing radiation on the extraction of bioactive compounds from these residues and related bioactive properties. Irradiated residues were demonstrated to have enhanced bioactive characteristics that turn the prepared extracts suitable for applications in food industry, resulting in high-added-value products as well as reducing adverse impacts on the environment.

Influence of physical variables on the transfer of Salmonella Typhimurium LT2 between potato (Solanum tuberosum) and stainless steel via static and dynamic contact.

Bacterial cross-contamination between foods and contact surfaces can increase food safety risk; however, these processes are not well described in terms of fundamental variables. The objective was to determine the effect of sliding speed (3.75, 5.00, or 7.75 mm/s), contact time (5 or 40 s), normal pressure (~1217 to 8869 Pa), and number of sequential contacts on bacterial transfer to/from potato samples and stainless steel surfaces. Potato samples (~11 g, 3 × 3 × 1 cm) were either pulled across a stainless steel plate inoculated with Salmonella Typhimurium LT2 (~6.23 Log CFU/cm2) (dynamic contact) or placed on the inoculated plate for multiple sequential contacts on uninoculated squares (static contact). Salmonella on the potato and steel plate then were quantified by plating on modified trypticase soy agar. Bacterial transfer increased with increasing sliding speed (P = 0.0098) in dynamic tests and with contact time (P < 0.0001) in static tests. Salmonella on the inoculated potatoes decreased (P < 0.0001) from ~6.5 to ~5.5 Log CFU after 18 sequential static contacts with stainless steel. Reporting transfer results based on fundamental variables will improve the overall impact of bacterial transfer research on equipment design, cleaning/sanitation strategies, and overall food safety.