Welding fume exposure and prevalence of chronic respiratory symptoms among welders in micro- and small-scale enterprise in Akaki Kality sub-city, Addis Ababa, Ethiopia: a comparative cross-sectional study.

BACKGROUND: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied. OBJECTIVE: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia. METHODS: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min. RESULT: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89). CONCLUSIONS: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers.

Heavy metal worker's pneumonoconiosis with lung parenchymal damage and Peripheral neuropathy: case report.

Heavy metals even at low concentrations can damage all systems in the human body from the cellular level by causing disruptions in DNA repair mechanisms, cell division and apoptosis. A 49-year-old man who had been working in the sanding and deburring department of a factory producing underground water pipes for 15 years, presented with complaints of effort dyspnea, cough and loss of strength in his left hand. Computed tomography of the lung revealed diffuse micronodular appearance in all zones in both lungs, subpleural nodule and bronchial dilatation. All serological tests for autoimmune disease were negative. Neurological examination of the patient revealed signs of 2nd motor neuron involvement only in one upper extremity. All of the tests that were studied for the differential diagnosis of multifocal motor neuropathy were found negative. Open lung biopsy with videothoracoscopy was practiced and interstitial changes were observed in the lung parenchyma with intense iron accumulation with Prussian blue stain. The patient was diagnosed with hard metal lung disease (HMLD) and toxic neuropathy (TN) with peripheral nerve involvement due to exposure to metal dust in the working environment. Although the patient had no loss of lung function, he was removed from the working environment, because of function loss in the left hand and is still being followed up.

Risk of lung cancer among welders and flame cutters: A systematic review and meta-analysis of case controlled studies.

OBJECTIVES: The process of flame-cutting and welding is believed to be highly hazardous for workers involved in related industries. The study aims to provide a comprehensive quantitative effect of the risk of lung cancer due to exposure to welding fumes. METHODS: A systematic review was conducted to extract published estimates of Odd's Ratio (OR) of the association of lung cancer and exposure to welding fumes, till 2022. Studies were extracted from the PubMed and Cochrane database and Google Scholar. Studies from all parts of the world were considered. Through a meta-analysis conducted with random effects model, a forest plot was created, and publication bias was checked using a funnel plot. RESULTS: The meta-analysis yielded an OR of 1.28 (95% CI 1.055-1.55), with a moderately high heterogeneity between the studies [I2=72%; T2=0.0524;Q=36.12(P<0.001)]. The sensitivity and influence analysis confirmed the absence of highly influential studies that may have led to potentially distorted outcomes. The funnel plot showed no evidence of publication bias among the studies included in this analysis. CONCLUSION: As the association between lung cancer and occupational hazards from exposure to welding fumes is certain, there is a need to control and regulate industrial activities that involve welding and flame cutting. Already, restrictions on safe levels of fume in the workplace are in operation.

Analysis of factors affecting nonalcoholic fatty liver disease in Chinese steel workers and risk assessment studies.

BACKGROUND: The global incidence of nonalcoholic fatty liver disease (NAFLD) is rapidly escalating, positioning it as a principal public health challenge with significant implications for population well-being. Given its status as a cornerstone of China's economic structure, the steel industry employs a substantial workforce, consequently bringing associated health issues under increasing scrutiny. Establishing a risk assessment model for NAFLD within steelworkers aids in disease risk stratification among this demographic, thereby facilitating early intervention measures to protect the health of this significant populace. METHODS: Use of cross-sectional studies. A total of 3328 steelworkers who underwent occupational health evaluations between January and September 2017 were included in this study. Hepatic steatosis was uniformly diagnosed via abdominal ultrasound. Influential factors were pinpointed using chi-square (χ2) tests and unconditional logistic regression analysis, with model inclusion variables identified by pertinent literature. Assessment models encompassing logistic regression, random forest, and XGBoost were constructed, and their effectiveness was juxtaposed in terms of accuracy, area under the curve (AUC), and F1 score. Subsequently, a scoring system for NAFLD risk was established, premised on the optimal model. RESULTS: The findings indicated that sex, overweight, obesity, hyperuricemia, dyslipidemia, occupational dust exposure, and ALT serve as risk factors for NAFLD in steelworkers, with corresponding odds ratios (OR, 95% confidence interval (CI)) of 0.672 (0.487-0.928), 4.971 (3.981-6.207), 16.887 (12.99-21.953), 2.124 (1.77-2.548), 2.315 (1.63-3.288), 1.254 (1.014-1.551), and 3.629 (2.705-4.869), respectively. The sensitivity of the three models was reported as 0.607, 0.680 and 0.564, respectively, while the precision was 0.708, 0.643, and 0.701, respectively. The AUC measurements were 0.839, 0.839, and 0.832, and the Brier scores were 0.150, 0.153, and 0.155, respectively. The F1 score results were 0.654, 0.661, and 0.625, with log loss measures at 0.460, 0.661, and 0.564, respectively. R2 values were reported as 0.789, 0.771, and 0.778, respectively. Performance was comparable across all three models, with no significant differences observed. The NAFLD risk score system exhibited exceptional risk detection capabilities with an established cutoff value of 86. CONCLUSIONS: The study identified sex, BMI, dyslipidemia, hyperuricemia, occupational dust exposure, and ALT as significant risk factors for NAFLD among steelworkers. The traditional logistic regression model proved equally effective as the random forest and XGBoost models in assessing NAFLD risk. The optimal cutoff value for risk assessment was determined to be 86. This study provides clinicians with a visually accessible risk stratification approach to gauge the propensity for NAFLD in steelworkers, thereby aiding early identification and intervention among those at risk.

Occupational Exposure to Welding Fumes and Associated Respiratory Morbidities among arc Welders in Ikenne, Nigeria.

Background: Few studies have been conducted on the respiratory morbidities of welders in Nigeria, and further research is needed to determine the extent of fume exposure and the implicated metals at workplaces. This study was done to determine whether welding gases are associated with respiratory illness among welders in Ikenne Local Government Area, Ogun State, Nigeria. Methods: A cross-sectional study comparing 142 welders and 142 controls was carried out. Lung function testing and clinical assessments were done. The Chi-square test & the independent T-tests were used to test for the association between socio-demographic characteristics and respiratory symptoms & the association between differences in means of lung function parameters among welders and controls respectively. Results: Chromium, nickel, manganese, carbon monoxide, and nitrogen dioxide levels were higher than the recommended values. Forced expiratory volume in the first second (FEV1) was significantly lower in welders (2.62±0.7) than in controls (2.81±0.7) (t=2.148, p<0.05). FEV1/FVC was significantly lower among welders (75±13.7) compared to controls (80.7±8.0). (t=4.165, p<0.001). Conclusion: The study showed that the welders presented with more respiratory morbidities than the controls, this may be a result of exposure to high levels of welding fumes beyond the recommended values for prolonged periods without using personal protective equipment, which results in significant morbidities. There should be enforcement of basic workplace safety standards by ensuring that the use of personal protective equipment (PPE) is enforced and the construction of workshops that are well-ventilated through the welders' association and relevant law enforcement agencies.

A case of welder's lung with end-stage pulmonary fibrosis.

BACKGROUND: Welding, performed regularly by more than a million workers worldwide, is associated with exposures to irritative, fibrogenic and carcinogenic fumes and gases. METHODS AND RESULTS: We present the case of a welder who had worked under extremely poor hygiene conditions for nearly 20 years and had developed end-stage lung fibrosis, finally requiring lung transplantation. Detailed histopathology and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) analyses of his lungs showed advanced interstitial fibrosis and dust deposits in the lungs and in peribronchial lymph nodes containing welding type bodies, Fe, Si (silica), Ti (titanium), SiAl (aluminum silicates), Fe with Cr (Steel), and Zr (Zirkonium). CONCLUSION: In the absence of a systemic disorder and the failure to meet the criteria for diagnosis of idiopathic pulmonary fibrosis (IPF), these findings suggest welder's lung fibrosis as the most likely diagnosis.

Association of buccal micronucleus cytome assay (BMNCyt) biomarkers with inorganic element concentration and genetic polymorphisms in welders.

Welding fumes are classified as carcinogenic to humans. The aim of the present study was to measure buccal micronucleus cytome assay biomarkers and to evaluate their association with inorganic elements and genetic polymorphisms (XRCC1, OGG1, XRCC3, GSTM1, and GSTT1) in welders (n = 98) and control individuals (n = 100). Higher levels of DNA damage and cell death were observed in the exposed group. Also, a significant correlation between the frequency of micronuclei and Na, Si, Cl, Ti, Cr, Zn and Mg concentrations. The formation of micronuclei, binucleated cells, cell death was associated with polymorphisms in repair pathways. The OGG1Ser326Cys and XRCC3 241Thr/Met genotypes were associated with cell death. Individuals with GSTM1 null genotype had a higher frequency of micronuclei. These results demonstrate that the deleterious effects of exposure to welding fumes are exacerbated by lifestyle habits, and genetic polymorphisms can influence DNA damage and cell death.

Occupational Exposure to Metal Fumes Among Iranian Welders: Systematic Review and Simulation-Based Health Risk Assessment.

There have been numerous reports of welder's worker exposure to metal fumes. Carcinogenic and non-carcinogenic (neurological, dermal, and etc.) effects are the adverse outcomes of exposure to welding fumes. In this review study, data were collected from previous studies conducted in Iran from 1900 to 2020. The risk of carcinogenicity and non-carcinogenicity due to exposure to welding metal fumes was assessed using the United States Environmental Protection Agency (USEPA) method based on the Monte Carlo simulation (MCS). Results showed mean of metal fume concentration in gas welding was in the range of 1.8248 to 1060.6 (µg/m3) and in arc welding was 54.935 to 4882.72 (µg/m3). The mean concentration of fumes in gas welding is below the recommended American Conference of Governmental Industrial Hygienists (ACGIH) standard exposure limit except for manganese, and in the arc welding, all metal fume concentrations are below the standard exposure limit except for manganese and aluminum. The results showed that the risk of carcinogenicity due to exposure to nickel, manganese in both gas and arc welding, and cadmium in gas welding was higher than standard level (hazard quotient (HQ) more than 1). Cancer risk due to exposure to nickel in both gas and arc welding was probable (1 × 10-6 < cancer risk (CR) < 1 × 10-4). Health risk assessment showed that welders are exposed to health risks. Preventive measures should be applied in welding workplaces to reduce the concentrations of metal fumes.

Human biomonitoring and personal air monitoring. An integrated approach to assess exposure of stainless-steel welders to metal-oxide nanoparticles.

In welding, there is a potential risk due to metal-oxide nanoparticles (MONPs) exposure of workers. To investigate this possibility, the diameter and number particles concentration of MONPs were evaluated in different biological matrices and in personal air samples collected from 18 stainless-steel welders and 15 unexposed administrative employees engaged in two Italian mechanical engineering Companies. Exhaled breath condensate (EBC) and urine were sampled at pre-shift on 1st day and post-shift on 5th day of the workweek, while plasma and inhalable particulate matter (IPM) at post-shift on 5th day and analysed using the Single Particle Mass Spectrometry (SP-ICP-MS) technique to assess possible exposure to Cr2O3, Mn3O4 and NiO nanoparticles (NPs) in welders. The NPs in IPM at both Companies presented a multi-oxide composition consisting of Cr2O3 (median, 871,574 particles/m3; 70 nm), Mn3O4 (median, 713,481 particles/m3; 92 nm) and NiO (median, 369,324 particles/m3; 55 nm). The EBC of welders at both Companies showed Cr2O3 NPs median concentration significantly higher at post-shift (64,645 particles/mL; 55 nm) than at pre-shift (15,836 particles/mL; 58 nm). Significantly lower Cr2O3 NPs median concentration and size (7762 particles/mL; 44 nm) were observed in plasma compared to EBC of welders. At one Company, NiO NPs median concentration in EBC (22,000 particles/mL; 65 nm) and plasma (8248 particles/mL; 37 nm) were detected only at post-shift. No particles of Cr2O3, Mn3O4 and NiO were detected in urine of welders at both Companies. The combined analyses of biological matrices and air samples were a valid approach to investigate both internal and external exposure of welding workers to MONPs. Overall, results may inform suitable risk assessment and management procedures in welding operations.

Effect of occupational exposure to welding fumes and noise on heart rate variability: An exposed-unexposed study on welders and airport workers' population.

Introduction: Welding fumes (WF) are a complex mixture of gas and particles. Action of occupational exposure to WF on cardiovascular system has been recently studied as for noise. Research question: The main objectives of our study are therefore to evaluate the impact of exposure to WF, noise, and combined WF and noise on autonomic nervous system as assessed by heart rate variability (HRV). Methods: The study groups were 16 welders and eight airport workers (as a control group). All the participants underwent ambulatory electrocardiogram, personal WF, and noise exposure monitoring, respectively, with dust track and calibrated noise dosimeter during workday. Atmospheric environmental assessments at workplaces have been also performed. HRV parameters were summarized for all the workday and hourly. Correlation tests were used to examine relation between HRV parameters and levels of noise exposure in the two population. Analysis of covariance (ANCOVA) was used for mean of each HRV parameters. Results: For HRV parameters, we found significant higher levels for mean range of high frequency (HF), standard deviation of normal-to-normal R-R interval (SDNN), and root mean square of successive heartbeat interval difference (RMSSD) in welders which suggested an imbalance between sympathetic and parasympathetic nervous system in this population. For relation between noise and HRV parameters, we noted that levels of low frequency (LF), HF, and SDNN were significantly correlated with mean noise levels for welders (respectively, r = 0.62, r = 0.357, r = 0.48), not in control group. Using ANCOVA, we found that working as a welder significantly increases mean of HF (p = 0.01) and RMSSD (p = 0.02) and decreases in LF/HF (p = 0.008). Indeed, the interaction between exposure to WF and mean noise levels for HF (p = 0.005), LF/HF (p = 0.01), and RMSSD (p = 0.007) was significant. Conclusion: This study shows an impact of WF and noise on ANS balance. One hypothesis is WF exposure could increase sensibility to noise exposure on autonomic nervous system or there is a synergic effect.

Manganese, Iron, Lead, and Zinc Levels and Haematological Profile among Welders in Bibiani Anhwiaso Bekwai District, Ghana.

Welders are exposed to metal ions or oxides through direct contact at occupational sites or indirectly through uptake from contaminated dust or air. This study was a case-control study designed to assess the levels of some heavy metals and the hematological profile of welders (cases) as compared to nonwelders (controls) from Bibiani Anhwiaso Bekwai District of Ghana, comparatively to determine whether their values are within acceptable international range. A quantitative-based survey using structured questionnaires was used to collect demographic data from purposively selected welders (n = 40) and nonwelders (n = 40) from the study area. Five (5 mL) blood samples were collected from the study participants and analyzed for blood cell count as well as levels of Mn, Fe, Pb, and Zn. There were no significant differences in the Mn, Zn, and Fe levels between the welders and nonwelders (p=0.431, 0.53 vs. 0.23 mg/L, p=0.05, 0.41 vs. 0.15, p=0.886, 1.82 vs. 1.11). The level of Pb was, however, significantly lower among welders compared to the nonwelders (p=0.016, 0.09 < 0.3 mg/L). The total white blood cell count did not differ significantly between welders and nonwelders (p=0.365, 5.16 vs. 4.85 × 109/L). However, the mixed cell fraction was significantly higher among welders compared to nonwelders (p=0.027, 0.34 × 109/L > 0.28 × 109/L). Red blood cell count and indices showed no significant differences between the welders and nonwelders. Hemoglobin levels in welders were, however, higher (14.47 g/dL) but this was not statistically significant compared to their nonwelder counterparts (13.85 g/dL). It was concluded from the study that welders in Bibiani Anhwiaso Bekwai District of the Western Region of Ghana had elevated levels of Pb in their bodies. This was associated with an increase in mixed white blood cell fraction platelets. However, the recorded levels were within the accepted physiological limits suggesting that the heavy metal exposure of welders had no clinically pathological significance.

Risk factors for work-related musculoskeletal disorders among welders in the informal sector under resource constrained settings.

BACKGROUND: Welding tasks involve the use of awkward working postures and repetitive movements and therefore pose a risk for developing work-related musculoskeletal disorders (WRMDs). OBJECTIVES: This study aimed to assess the prevalence, severity and risk factors for WRMDs among welders in the informal sector. MATERIALS AND METHODS: A total of 128 welders (33±10.5 years) were purposively selected from three urban centers in Zimbabwe. WRMDs were assessed using a Modified Cornell Musculoskeletal Questionnaire (MCMQ). The Quick Exposure Check (QEC) and the Rapid Entire Body Assessment (REBA) were used for postural risk analysis. P < 0.05 was considered significant. RESULTS: Analyses showed a high prevalence of pain in the lower back (78%), right shoulder (66%), left hand wrist (62%) and right hand wrist (61%). With regards to the severity of lower back pain, 4% reported low pain, 24% mild pain and 48% were severe cases of pain. Elevated grand REBA scores were significantly associated with self-reported in various body regions. Multinomial regression analyses showed that smoking, prolonged working hours and not engaging in physical activities were significant predictors for pain. High job satisfaction and taking adequate work-rest breaks were protective factors for WRMDs (p < 0.05). CONCLUSION: There is a high prevalence of WRMDs among welders due to individual and work-related risk factors. Ergonomics education is required to address the risk factors for and progression of WRMDs among welders.

[Neck musculoskeletal disorders and their influence factors among welders in an automobile factory].

Objective: To explore the prevalence and risk factors of neck musculoskeletal diseases (MSDs) of welders among an automobile factory. Methods: In June 2019, a cluster random sampling method was used to select 677 electric welders from an automobile manufacturing plant in Shiyan City as the survey objects, and a questionnaire survey was conducted using the "Musculoskeletal Disorders Questionnaire" to analyze the prevalence and influencing factors of neck MSDs, and used logistic regression to analyze the relationship between the influencing factors and the prevalence of cervical MSDs. Results: The prevalence rate of MSDs in neck of welders was 54.8% (371/677) . The exposure rate of occupational factors, from high to low, were neckin a bent formord porsure was 71.6% (486/677) , repetitive head movements was 55.1% (373/677) , working in uncomfortable postures was 48.7% (330/677) and neck twisted was 46.8% (317/677) respectively. Sex, age, educational level, length of service, smoking, neck tilt, neck twist, working in uncomfortable posture and head repetitive movements were the risk factors of neck MSDs (P<0.05) . Multiple logistic regression analysis showed that, the main influencing factors of neck MSDs were sex, education level, age, length of service, smoking, neck tilt, working in uncomfortable posture (OR = 2.11, 2.03, 1.83, 1.21, 1.78, 1.90, 1.58, 95%CI: 1.28~3.48、1.47~2.81、1.33~2.52、1.03~1.41、1.22~2.60、1.28~2.83、1.11~2.27, P<0.05) , rest had protective effect on neck MSDs (OR= 0.38, 95%CI: 0.17~0.88, P<0.05) . Conclusion: Welders in automobile factory was highly exposed to occupational risk factors for neck MSDs. Occupational risk factors such as neck in a bent forward posture, working in an uncomfortable posture, prolonged siting, repetitive head movement should be the focus of intervention.

[Pulmonary siderosis in a welder, diagnosis on unusual pneumopathy]. / Pneumopathie atypique chez un soudeur : sidérose pulmonaire ?

INTRODUCTION: Pulmonary siderosis or welder's lung is an occupational lung disease that is usually observed after chronic exposure to iron dust. OBSERVATION: A 55-years-old welder visited hospital with dyspnea linked to occupational exposure. Pulmonary function studies revealed lung function abnormalities with decerase of FEV1 and TPC. Based on the chest Tomography CT results, he was diagnosed with obliterans bronchiolitis. A chest biopsy was performed and the specimen is for a pulmonary siderosis aspect. DISCUSSION: This case of pulmonary siderosis is an unusual one by symptoms, CT images and short latency of exposure. An intense inhalation of iron particles could explain this case and inflammatory process and it highlights need of histological analysis of chest biopsy.

Associations between welding fume exposure and blood hemostatic parameters among workers exposed to welding fumes in confined space in Chonburi, Thailand.

BACKGROUND: Occupational welding fumes contain varieties of toxic metal particles and may affect cardiovascular system like the Particulate Matters (PM). Few studies have focused on the effects of toxic metals on the hemodynamic balance; however, the reporting results were not consistent. This study aimed to investigate the association between toxic metals exposure (Chromium (Cr), Manganese (Mn) and Lead (Pb)) and blood hemostatic parameters status after a 3-week exposure cessation among workers exposed to welding fumes. METHODOLOGY: Structured interviews and biological samplings were conducted for 86 male workers without a history of Anemia and Cardiovascular diseases (CVDs) and working in a confined space to construct crude oil tanks. Metal levels of Cr, Mn and Pb in urine were measured during the working days using Inductively Coupled Plasma Mass Spectrometer (ICP-MS) method. The concentrations of hemostatic proteins in blood (White blood cell counts (WBC), Lymphocytes, Monocyte, Eosinophil, Neutrophil, Hematocrit (Hct) were assessed after a 3 weeks exposure cessation. Workers were divided into groups based on occupation type (welder group and non-welder group), and based on metal levels (high and low exposure groups) for comparison. Linear regression models were used to explore the association between metal exposure and multiple blood hemostatic parameters adjusted for age, Body Mass Index (BMI), and smoking status. RESULTS: Urine Mn and Cr level of the welder group was significantly higher than the non-welder group (Mn: 0.96 VS 0.22 ug/g creatinine, p < 0.001; Cr: 0.63 VS 0.22 ug/g creatinine, p < 0.01). The mean value of Hct in the welder group was 44.58 ± 2.84 vol%, significantly higher than the non-welder group (43.07 ± 3.31 vol%, p = 0.026). The median value of WBC in the high Mn-exposed group (6.93 ± 1.59 X 106 Cell/ml) was significantly lower than the low Mn-exposed group (7.90 ± 2.13 X 106 Cell/ml, p = 0.018). The linear regression analyses showed that there was a significantly negative association between log transformed WBC value and the Mn exposure groups (high and low) after adjusting for age, BMI, and smoking status (ß = - 0.049, p = 0.045), but no significant result was found between WBC and occupation types (welder and non-welder) (p > 0.05). Multiple linear regression analysis also showed positive association between Hct and occupational types (welder and non-welders) (ß = 0.014, p = 0.055). The other hemostatic parameters were not different from controls when divided by occupation type or metal level groups. CONCLUSIONS: Our results showed that welders were exposed to about 3 to 4 times higher Mn and Cr concentrations than non-welders. Moreover, one third of the non-welders were exposed to high-exposure groups of Mn and Cr metals. Regression models revealed a significant association of the WBC counts with the Mn exposure group. Therefore, we infer that Mn exposure may play a significant role on the blood hemostatic parameters of workers in the confined space. Hazard identification for non-welders should also be conducted in the confined space.

Cytokinesis-block micronucleus cytome (CBMN-CYT) assay and its relationship with genetic polymorphisms in welders.

Fumes generated in the welding process are composed of micrometric and nanometric particles that form when metal fumes condense. The International Agency for Research on Cancer established that many compounds derived from the welding process are carcinogenic to humans. Still, there are few studies related to the role of genetic polymorphisms. This work aimed to analyze the influence of OGG1 Ser326Cys, XRCC1 Arg280His, XRCC1 Arg194Thr, XRCC1 Arg399Gln, XRCC3 Thr241Met, GSTM1, and GSTT1 gene polymorphisms on DNA damage of 98 subjects occupationally exposed to welding fumes and 100 non exposed individuals. The results showed that individuals exposed to welding fumes with XRCC3 Thr241Thr, XRCC3 Thr241Met, and GSTM1 null genotypes demonstrated a significantly higher micronucleus frequency in lymphocytes. In contrast, individuals with XRCC1 Arg399Gln and XRCC1 Gln399Gln genotypes had significant levels of NPBs. OGG1 326 Ser/Cys, OGG1 326 Cys/Cys, XRCC1 194Arg/Thr, XRCC1 194Thr/Thr, and GSTT1 null genotypes exhibited significantly higher apoptotic values. Also, XRCC1 194Arg/Trp, XRCC1 194Thr/Thr, and GSTM1 null genotype carriers had higher necrotic levels compared to XRCC1 194Arg/Arg and GSTM1 nonnull carriers. Compositional analysis revealed the presence of iron, manganese, silicon as well as particles smaller than 2 µm that adhere to each other and form agglomerates. These results may be associated with a mixture of components, such as nitrogen dioxide, carbon monoxide, and metallic fumes, leading to significant DNA damage and cell death processes. These findings demonstrated the importance of the association between individual susceptibility and DNA damage levels due to occupational exposure to welding fumes; and constitute one of the first studies carried out in exposed workers from Colombia.

Blood leukocyte count as a systemic inflammatory biomarker associated with a more rapid spirometric decline in a large cohort of iron and steel industry workers.

OBJECTIVE: Iron and steel industry workers are exposed to high levels of inhalable dust particles that contain various elements, including metals, and cause occupational lung diseases. We aim to assess the relationship between occupational dust exposure, systemic inflammation, and spirometric decline in a cohort of Chinese iron and steel workers. METHODS: We studied 7513 workers who participated in a Health Surveillance program at Wugang Institute for Occupational Health between 2008 and 2017. Time-weighted exposure intensity (TWEI) of dust was quantified based on self-reported dust exposure history, the experience of occupational hygienists, and historical data of dust exposure for workers with certain job titles. A linear mixed-effects model was used for association analyses. RESULTS: The average annual change of lung function was - 50.78 ml/year in forced expiratory volume in 1 s (FEV1) and - 34.36 ml/year in forced vital capacity (FVC) in males, and - 39.06 ml/year in FEV1 and - 26.66 ml/year in FVC in females. Higher TWEI prior to baseline was associated with lower longitudinal measurements of FEV1 and FVC but not with their decline rates. Higher WBC and its differential at baseline were associated with lower longitudinal measurements and a more rapid decline of FEV1 and FVC in a dose-dependent monotonically increasing manner. Moreover, the increase of WBC and its differential post-baseline was also associated with a more rapid decline of FEV1 and FVC. CONCLUSIONS: Our findings support the important role of systemic inflammation in affecting the temporal change of lung function in iron and steel industry workers.

Incidence of lung cancer and mortality among civil construction industry workers: A protocol for a systematic review and meta-analysis.

BACKGROUND: The construction sector is one of the most stable growth industries in the world. However, many studies have suggested an association between occupational exposure in civil construction and lung cancer risk. Thus, this study aims to assess lung cancer risk in civil construction workers occupationally exposed to physical and chemical agents through a systematic review and meta-analysis. METHODS/DESIGN: Studies will be identified by searching PUBMED, Embase, SCOPUS, WEB OF SCIENCE and the reference list of included articles. Eligible study designs will be cohort, cross-sectional, and case-control studies that report occupational exposure to physical or chemical agents and lung cancer risk through mortality or incidence outcomes. A meta-analysis will be used to combine odds ratios (ORs) from case-control studies and relative risks (RR) from cohort studies. Two reviewers will independently screen articles, extract data, and assess scientific quality using standardized forms and ROBINS-E tool if available. Otherwise, the New-Castle Ottawa rating scale will be used. Any of those will also be used in combination with the GRADE approach for quality of evidence. Overall risk estimates and their corresponding 95% confidence intervals (CIs) will be obtained using the random-effects model meta-analysis. This systematic review and meta-analysis will be conducted following the Meta-analysis of Observational Studies in Epidemiology (MOOSE) guidelines. Results will be reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. DISCUSSION: This review will identify and synthesize studies investigating the association between occupational exposure in the construction industry and lung cancer. The findings will help governmental entities and researchers with evidence-based decision-making because they will integrate and validate the evidence on construction workers' health effects due to occupational exposure. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42020164209.

Safety-Specific Passive-Avoidant Leadership and Safety Compliance among Chinese Steel Workers: The Moderating Role of Safety Moral Belief and Organizational Size.

Despite the documented relationship between active-approaching leadership behaviors and workplace safety, few studies have addressed whether and when passive-avoidant leadership affects safety behavior. This study examined the relationship between two types of safety-specific passive-avoidant leadership, i.e., safety-specific leader reward omission (SLRO) and safety-specific leader punishment omission (SLPO), and safety compliance, as well as the moderating effects of an individual difference (safety moral belief) and an organizational difference (organizational size) in these relationships. These predictions were tested on a sample of 704 steel workers in China. The results showed that, although both SLRO and SLPO are negatively related to safety compliance, SLPO demonstrated a greater effect than SLRO. Moreover, we found that steel workers with high levels of safety moral belief were more resistant to the negative effects of SLRO and SLPO on safety compliance. Although steel workers in large enterprises were more resistant to the negative effects of SLPO than those in small enterprises, the SLRO-compliance relationship is not contingent upon organizational size. The current study enriched the safety leadership literature by demonstrating the detrimental and relative effects of two types of safety-specific passive-avoidant leadership on safety compliance and by identifying two boundary conditions that can buffer these relationships among steel workers.