[The duration of orthodontic treatment and the number of visits depending on the degree of difficulty when using modern orthodontic equipment]. / Prodolzhitel'nost' ortodonticheskogo lecheniya i kolichestvo poseshchenii v zavisimosti ot stepeni ego trudnosti pri ispol'zovanii sovremennoi ortodonticheskoi apparatury.

OBJECTIVE: The aim of the study is to analyze the estimated and actual duration of treatment and the number of visits to the orthodontist by patients using modern orthodontic equipment. Analysis of the duration of orthodontic treatment of patients with varying degrees of difficulty and comparison of the estimated and actually spent time for its implementation. MATERIAL AND METHODS: 308 medical records of patients who underwent orthodontic treatment were analyzed. According to the Siebert - Malygin method, the degree of difficulty of treatment, its duration, the number of necessary visits were calculated and the data obtained were compared with the actual time spent on correcting dental and occlusion anomalies and the number of visits by the patient to the orthodontist. RESULTS: The results of treatment of 308 patients who underwent orthodontic treatment with modern non-removable equipment (braces) are analyzed in the clinic of LLC «Prime dentistry¼ in Ryazan. Before starting treatment, the preliminary treatment time was calculated using the method of determining the difficulty of orthodontic treatment of Siebert - Malygin. The calculation of the degree of difficulty of treatment, its duration, and the number of necessary visits was carried out. The data obtained were compared with the actual time spent on correction of dental and occlusion anomalies and the number of visits by the patient to an orthodontist. It was found that, despite the use of modern equipment, the treatment time practically does not decrease, but the number of visits to achieve the desired result is significantly reduced. Coefficients have been calculated to clarify the required number of visits to the orthodontist. In the treatment of anomalies in the position of teeth (APD), it is 0.77, APD, combined with distal occlusion - 0.79 deep - 0.78, open - 0.66 and mesial - 0.69. CONCLUSION: The use of modern orthodontic equipment reduces the number of patient visits to the doctor, which saves time, reduces labor costs and allows you to provide the necessary assistance to more people in need. The coefficients calculated during the study to determine the required number of visits to an orthodontist by a patient, depending on the existing orthodontic pathology, make it possible to predict the treatment time with greater accuracy when using the Siebert - Malygin method. This is very relevant when planning upcoming manipulations and to more accurately justify the cost of treatment depending on the required time and number of visits to eliminate APS.

Efficacy of an innovative Herbst appliance with TADs for patients with hyperdivergent class II malocclusion: study protocol for a randomised controlled trial.

INTRODUCTION: Class II treatment with mandibular retrusion often involves the Herbst appliance due to its efficiency and low requirement of cooperation. Despite its advantages, it causes side effects concerning the occlusal plane and pogonion in terms of clockwise rotation that hinder the desired mandibular advancement for hyperdivergent patients. In this study, we will use a newly designed Herbst appliance, and a protocol that is accompanied by TADs for vertical control to avoid maxillary clockwise rotation. We hypothesise that the effect of the Herbst appliance with the vertical control approach will be beneficial for maintaining or even decreasing the skeletal divergence in hyperdivergent class II patients compared with conventional Herbst treatment. METHODS AND ANALYSIS: This study is a randomised, parallel, prospective controlled trial that will study the efficacy of Herbst with or without vertical control in children with hyperdivergent skeletal class II malocclusion. A total of 44 patients will be enrolled and randomised in a ratio of 1:1 to either Herbst treatment or Herbst treatment with vertical control. Participants will be recruited at the Shanghai Stomatological Hospital, Shanghai, China. The primary endpoint is the change in the angle indicating the occlusal plane and Sella-Nasion plane from baseline (T0) to the primary endpoint (T2) on cephalometric measurements by lateral X-ray examination. Important secondary outcomes include the root length of the anterior teeth, and the assessment score of the Visual Analogue Scale Questionnaire, etc. Safety endpoints will also be evaluated. ETHICS AND DISSEMINATION: This study has been approved by the ethics committee of the Shanghai Stomatological Hospital (Approval No. (2021) 012). Before enrolment, a qualified clinical research assistant will obtain written informed consent from both the participants and their guardians after full explanation of this study. The results will be presented at national or international conferences and published in peer-reviewed journals. TRIAL REGISTRATION NUMBER: ChiCTR2100049860, Chinese Clinical Trial Registry.

Comparison of Bracket Position Accuracy with Different CAD/CAM Indirect Bonding Systems

ABSTRACT Objective To evaluate the accuracy of three different digital bracket positioning systems, comparing vertical, mesiodistal and buccolingual accuracy. Material and Methods The same case was sent to Orapix, Insignia, and Orthocad systems and the brackets were bonded to the malocclusion models.Damon 3 MX brackets were used with all systems and the brackets were bonded to the models with the same bonding protocol and materials. The comparison of the position of each single bracket was made with digital photography, and ImageJ software was used to find the length in pixels and then convert it to hundredths of a mm for vertical, mesiodistal and buccolingual displacement, compared to the setup. Results Insignia System reported the average higher vertical displacement (0.28 mm), compared with the other two appliances (0.22-0.23 mm), and showed the lowest average displacement for the mesiodistal and buccolingual positioning (0.14 and 0.07 mm, respectively).However, these slight bracket positioning variations between these bonding systems were not statistically different (p>0.05). Conclusion The three systems analyzed were shown to be accurate in positioning the brackets, and none of them was statistically better.

Membrane fixation for osseous graft stabilization in periodontally accelerated osteogenic orthodontics: a comparative study.

BACKGROUND: Periodontally accelerated osteogenic orthodontics (PAOO) is a treatment for bone defects associated with a lack of bone graft stability, especially in coronal locations. This study aimed to compare a modified technique of membrane fixation that utilizes periosteal sutures (using a pouch design) with the traditional approach, which does not use membrane fixation. METHODS: Twenty-eight patients with a total of 168 teeth treated were divided into two groups: 1-A, in which patients were treated using the modified technique (with membrane fixation), and group 2-B, in which patients were treated using the traditional technique (without membrane fixation). The postoperative bone thickness was evaluated via radiographic examination. RESULTS: Postoperative improvements in bone augmentation were detected in both groups. At 12 months, the values of the CHBT (measured from the midpoint of the coronal third to the labial cortical surface, 0.84 ± 0.33 mm) and the values of VBL (measured from the alveolar crest to the cemento-enamel junction, - 2.35 ± 0.80 mm)were significantly greater in the modified technique group than those in the traditional technique group (CHBT:0.12 ± 0.21 mm and VBL:-1.39 ± 0.99 mm; P = 0.00 and P = 0.01). CONCLUSIONS: This study shows that compared to the traditional technique, the modified PAOO technique with membrane fixation using periosteal sutures provides improved graft stabilization, superior coronal augmentation and satisfactory vertical volume.

The National Dental Practice-Based Research Network Adult Anterior Open Bite Study: Treatment recommendations and their association with patient and practitioner characteristics.

INTRODUCTION: This aim of this paper is to describe and identify the practitioner and patient characteristics that are associated with treatment recommendations for adult anterior open bite patients across the United States. METHODS: Practitioners and patients were recruited within the framework of the National Dental Practice-Based Research Network. Practitioners were asked about their demographic characteristics and their treatment recommendations for these patients. The practitioners also reported on their patients' dentofacial characteristics and provided initial cephalometric scans and intraoral photographs. Patients were asked about their demographic characteristics, previous orthodontic treatment, and goals for treatment. Four main treatment groups were evaluated: aligners, fixed appliances, temporary anchorage devices (TADs), and orthognathic surgery. Extractions were also investigated. Predictive multivariable models were created comparing various categories of treatment as well as extraction/nonextraction decisions. RESULTS: Ninety-one practitioners (mostly orthodontists) and 347 patients were recruited from October 2015 to December 2016. Increased aligner recommendations were associated with white and Asian patients, the presence of tongue habits, and female practitioners. TADs were recommended more often in academic settings. Recommendations for orthognathic surgery were associated with demographic factors, such as availability of insurance coverage and practitioner race/ethnicity, and dentofacial characteristics, such as anteroposterior discrepancies, more severe open bites, and steeper mandibular plane angles. Extraction recommendations were largely associated with severe crowding and incisor proclination. CONCLUSIONS: Both doctor and patient demographic factors, as well as dentofacial characteristics, were significantly associated with treatment recommendations for adult anterior open bite patients.

Comprehensive treatment approach for bilateral idiopathic condylar resorption and anterior open bite with customized lingual braces and total joint prostheses.

This case report describes the successful treatment of a 14-year-old girl with severe bilateral idiopathic condylar resorption and resultant mandibular retrusion, increased overjet, and anterior open bite. The nonextraction treatment plan included (1) aligning and leveling the teeth in both arches, (2) performing Le Fort I maxillary osteotomy, bilateral condylectomy, and mandibular joint replacement, and (3) postsurgical correction of the malocclusion. The orthodontic treatment was initiated with the use of custom lingual appliances followed by orthognathic surgery planned with virtual surgical planning. Patient-fitted and customized temporomandibular joint implants were designed and manufactured based on the patient's stereolithic bone anatomic model. Treatment was concluded with detailed orthodontic finishing. Optimum esthetic and functional results were achieved with the cooperation of 2 specialties and the use of state-of-the-art technology.

A comprehensive treatment approach for idiopathic condylar resorption and anterior open bite with 3D virtual surgical planning and self-ligated customized lingual appliance.

INTRODUCTION: We report the successful treatment of a 38-year-old woman with bilateral idiopathic condylar resorption and anterior open bite. She had incompetent lips, a gummy smile, increased lower facial height, high mandibular plane angle, skeletal and dental Class II malocclusion with mild mandibular crowding, increased overjet, and mandibular midline deviation to the right. METHODS: The treatment plan included: (1) presurgical alignment and leveling of the teeth in both arches; (2) jaw motion tracking (JMT) to detect mandibular movement; (3) 3-piece maxillary osteotomies with mandibular reconstruction and bilateral coronoidectomies; and (4) postsurgical correction of the malocclusion. The orthodontic treatment was performed with the use of custom lingual braces and clear brackets and the orthognathic surgery was planned with the use of virtual surgical planning. RESULTS: The idiopathic condylar resorption and anterior open bite were treated, crowding was eliminated in the lower anterior segment, correction of skeletal and dental Class II malocclusion was obtained, mandibular plane angle was reduced, and facial profile improved. CONCLUSIONS: The results suggest that esthetic and functional results can be achieved with the cooperation of 2 specialties and with the use of state-of-the-art technology.

The Effect Evaluation of Functional Appliance Used for Class II Patients With Temporomandibular Joint Anterior Disc Displacement.

Orthopedic functional appliances are usually used to correct patients with retrognathic mandible. However, a part of cases have a trend of relapse after splint treatment. The aim of this study was to explore the role of temporomandibular joint disc position in functional appliance treatment. This study included 8 patients who had 1 joint anterior disc displacement with reduction (ADDWR) and the other joint anterior disc displacement without reduction (ADDWoR) confirmed by magnetic resonance imaging (MRI). Only the ADDWR joint could return to its normal position after wearing the anterior repositioning appliances (ARAs). Condylar morphology, condylar height, and disc length were evaluated 6 months after ARA treatment. The MRI showed that new bone appeared on 7 joints with ADDWR and on 1 joint with ADDWoR. The condylar height has increased 1.4 mm in the ADDWR group, while 0.1 mm shorter in the ADDWoR group. Disc length has increased from 8.5 to 8.7 mm in the ADDWR group and 0.4 mm shorter in the ADDWoR group after wearing the ARA. Our results suggested that it is noneffective of functional appliance used for class II malocclusion adolescents with ADDWoR and only a normal disc-condyle relationship benefits condyle growth by functional appliance. Thus it is important to reposition the disc as soon as possible.

Evaluation of the prototype of a new bracket-positioning gauge

ABSTRACT Objective: The purposes of this study were to present a prototype of a bracket-positioning gauge, which makes vertical inclination of the instrument difficult, allowing a reduction of vertical bracket positioning error, and to test its accuracy in bracket positioning by groups of individuals with different clinical experience and in specific groups of teeth. Methods: For the testing of the prototype, four groups of six participants each were used: Group 1 was composed of undergraduate students in the dental school, who had no previous experience in bonding orthodontic attachments; Group 2 was composed of orthodontic graduate students in the dental school; Group 3 consisted of orthodontists with a maximum of 5 years of clinical experience; Group 4 comprised orthodontists with more than 5 years of clinical experience. A typodont was simulated with a Class I crowded malocclusion, which reproduced the same occlusal characteristics for all groups to be bonded. All participants were instructed to bond 0.022×0.028-in Edgewise brackets on the labial surfaces of the upper and lower incisors, canines, and premolars at a height of 4 mm from the incisal edge or the labial cusp tip. Results: Only the mean value of Group 1 showed statistically significant difference in the comparison with the standard measurement. In the groups of teeth, the difference was significant for the premolar and incisor groups. Conclusion: Clinical experience interfered with the accuracy of vertical positioning of orthodontic attachments. As for the groups of teeth, premolars, followed by canines and incisors had the closest mean values to the standard measurement.

RESUMO Objetivos: os objetivos deste estudo foram apresentar um protótipo de posicionador de braquetes ortodônticos que dificulte a inclinação no sentido vertical, possibilitando a redução dos erros de altura no posicionamento desses acessórios; além de testar sua precisão na colagem, realizada por grupos de indivíduos com diferentes tempos de experiência clínica em Ortodontia e em grupos específicos de dentes. Métodos: para os testes do protótipo desenvolvido, quatro grupos de seis participantes foram formados. O Grupo 1 foi composto por alunos do curso de Odontologia sem qualquer prática com colagem em Ortodontia; o Grupo 2, por estudantes em Ortodontia; o Grupo 3, por ortodontistas com menos de cinco anos de experiência clínica; e o Grupo 4, por ortodontistas com mais de cinco anos de experiência clínica em Ortodontia. Em um typodont, foi simulada uma má oclusão Classe I com apinhamento, com as mesmas características para todas as colagens realizadas. Todos os participantes foram instruídos a colar braquetes Edgewise 0,022" x 0,028" na superfície vestibular dos incisivos, caninos e pré-molares superiores e inferiores, na altura de 4mm da borda incisal ou cúspide vestibular. Resultados: somente a média do Grupo 1 apresentou diferença estatisticamente significativa na comparação com a medida padrão. Nos grupos de dentes, a diferença foi significativa para o grupo dos pré-molares e incisivos. Conclusão: o tempo de experiência clínica interferiu na precisão do posicionamento vertical do acessório ortodôntico e, quanto aos grupos de dentes, as médias mais próximas à medida padrão foram dos pré-molares, seguidas pelos caninos e incisivos.

Virtual orthodontic setup in orthodontic camouflage planning for skeletal Class III malocclusion

ABSTRACT The purpose of this paper was to emphasize the importance of the orthodontic setup in treatment planning for skeletal Class III malocclusion correction in an adult patient with moderate lower anterior crowding and anterior crossbite associated with two supernumerary lower incisors.

RESUMO O objetivo desse artigo é enfatizar a importância do setup ortodôntico no planejamento do tratamento da má oclusão de Classe III esquelética de uma paciente adulta com apinhamento anteroinferior moderado e mordida cruzada anterior associada à presença de dois incisivos inferiores supranumerários.

Comparison of changes in irregularity and transverse width with nickel-titanium and niobium-titanium-tantalum-zirconium archwires during initial orthodontic alignment in adolescents: A double-blind randomized clinical trial.

OBJECTIVES: The purpose of this prospective, double-blind, randomized clinical trial was to compare the clinical efficiency of nickel-titanium (NiTi) and niobium-titanium-tantalum-zirconium (TiNbTaZr) archwires during initial orthodontic alignment. MATERIALS AND METHODS: All subjects (ages between 12 and 20 years) underwent nonextraction treatment using 0.022-inch brackets. All patients were randomized into two groups for initial alignment with 0.016-inch NiTi archwires (n = 14), or with 0.016-inch TiNbTaZr archwires (n = 14). Digital scans were taken during the course of treatment and were used to compare the improvement in Little's Irregularity Index and the changes in intercanine and intermolar widths. RESULTS: There was approximately a 27% reduction in crowding during the first month with the use of 0.016-inch TiNbTaZr (Gummetal) wire, and an additional 25% decrease in crowding was observed during the next month. There was no significant difference between the two treatment groups in the decrease in irregularity over time ( P = .29). There was no significant difference between the two groups in the changes in intercanine and intermolar width ( P = .80). CONCLUSIONS: It can be concluded that Gummetal wires and conventional NiTi wires possess a similar ability to align teeth, and Gummetal wires have additional advantages over conventional NiTi, such as formability and use in patients with nickel allergy.

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions.

Influence of Class II Elastics on Centric Relation and Centric Occlusion Discrepancy after Orthodontic Treatment / Influencia de los Elásticos de Clase II sobre la Discrepancia de Relación Céntrica para la Oclusión Céntrica Después del Tratamiento Ortodóncico

ABSTRACT: The objective of this study was to verify the influence of the use of Class II intermaxillary elastics on centric relation (CR) to centric occlusion (CO) occlusal discrepancy. A total of 30 patients had been at the contention stage for at least three months were divided in two groups: G1 - 15 had been submitted to intramaxillary orthodontic mechanics only, and G2 - 15 had used Class II intermaxillary elastics. Distances of horizontal and vertical overlap and the distance or coincidence of the mandibular dental midline in relation to the maxillary midline were measured in CR and CO positions. Intergroup comparisons were performed using the Mann-Whitney test. No statistically significant differences (P>0.05) were found between G1 and G2. Both in the horizontal and vertical directions, these discrepancies were smaller than or equal to 1mm in 96.66 % of the patients. In the transverse plane, there was no discrepancy in 63.33 % of the patients, and in 33.33 % these discrepancies were equal to 0.5 mm. The use of Class II elastic didn't be capable of increasing the occlusal discrepancies between CR and CO.

RESUMEN: El objetivo de este estudio fue verificar la influencia del uso de los elásticos intermaxilares Clase II en la discrepancia oclusal entre la relación céntrica (RC) y la oclusión céntrica (OC). Un total de 30 pacientes que permanecieron en la fase de contención durante al menos tres meses se dividieron en dos grupos: G1 - 15 fueron sometidos solamente a la mecánica ortodóncica intramaxilar, y G2 - 15 habían utilizado elásticos de clase II intermaxilar. Se midieron las distancias de traslapo horizontal y vertical y la distancia o coincidencia de la línea mediana dentaria mandibular con respecto a la línea mediana maxilar en las posiciones RC y OC. Las comparaciones entre grupos se realizaron mediante la prueba de Mann-Whitney. No se encontraron diferencias estadísticamente significativas (P> 0.05) entre G1 y G2. Tanto en las direcciones horizontal como vertical, estas discrepancias fueron menores o iguales a 1 mm en el 96,66 % de los pacientes. En el plano transversal, no hubo discrepancia en el 63,33 % de los pacientes, y en un 33,33 % estas discrepancias fueron iguales a 0,5 mm. El uso de la clase II elástica no logró aumentar las discrepancias entre RC y OC.

Nonsurgical treatment of an adult with a skeletal Class II gummy smile using zygomatic temporary anchorage devices and improved superelastic nickel-titanium alloy wires.

Patients with a severe gummy smile and a skeletal Class II profile are difficult to treat. This case report describes an effective treatment alternative for improving a gummy smile in a patient with a severe Class II molar relationship, severe crowding, and lip protrusion using zygomatic anchorage devices and improved superelastic nickel-titanium wires. A 36-year-old woman had an excessive overjet and a deep overbite with a bilateral Angle Class II molar relationship. The cephalometric analysis demonstrated a Class II skeletal relationship (ANB, 9.5°), retroclination of the mandible (FMA, 38.4°), and severe labial inclination of the mandibular incisors (IMPA, 101.9°). The main treatment objectives included normalizing the overjet and overbite, improving the gummy smile, and establishing a satisfactory occlusion. During treatment with fixed appliances, intrusion of the total maxillary dentition using skeletal anchorage and elimination of the bimaxillary protrusion were achieved. Improvement of the lateral profile and gummy smile enhanced facial esthetics. Intrusion and distalization of the maxillary dentition with skeletal anchorage and improved superelastic nickel-titanium wires provided a satisfactory dental occlusion, esthetic improvement, and adequate function. This approach should be considered as an alternative treatment option to orthognathic surgery for adults with high-angle skeletal Class II malocclusion and a gummy smile.

Compensatory Class III malocclusion treatment associated with mandibular canine extractions

ABSTRACT Skeletal Class III malocclusions are ideally treated with orthodontic-surgical approaches. However, if there are no significant soft tissue implications and the patient does not want to undergo orthognatic surgery, other treatment options may be considered. The current case report describes a compensatory alternative for Class III malocclusion treatment, by means of mandibular canine extractions. This treatment alternative provided facial profile and occlusal improvement, which remains stable seven years posttreatment.

RESUMO As más oclusões esqueléticas de Classe III são idealmente tratadas com intervenções ortodôntico-cirúrgicas. Contudo, se não existirem implicações estéticas faciais e se o paciente não desejar se submeter à cirurgia ortognática, outras opções de tratamento podem ser consideradas. O presente caso clínico descreve um tratamento compensatório alternativo para a má oclusão de Classe III, com extrações de caninos inferiores. Esse tratamento alternativo propiciou melhoras no perfil facial e na oclusão, que permaneceu estável após sete anos da sua finalização.

Memotain: A CAD/CAM nickel-titanium lingual retainer.

Approximately 1/2 of maxillary and 1/5 of mandibular multi-stranded lingual retainers fail during retention in some form, either bond failure or wire breakage. Memotain is a new CAD/CAM fabricated lingual retainer wire made of custom-cut nickel-titanium, as an alternative to multi-stranded lingual retainers. It offers numerous perceived advantages to the traditional multi-stranded stainless steel wire, including precision fit, avoidance of interferences, corrosion resistance and even the potential for minor tooth movement as an active lingual retainer.

Early vertical correction of the deep curve of Spee

ABSTRACT Even though few technological advancements have occurred in Orthodontics recently, the search for more efficient treatments continues. This paper analyses how to accelerate and improve one of the most arduous phases of orthodontic treatment, i.e., correction of the curve of Spee. The leveling of a deep curve of Spee can happen simultaneously with the alignment phase through a method called Early Vertical Correction (EVC). This technique uses two cantilevers affixed to the initial flexible archwire. This paper describes the force system produced by EVC and how to control its side effects. The EVC can reduce treatment time in malocclusions with deep curves of Spee, by combining two phases of the therapy, which clinicians ordinarily pursue sequentially.

RESUMO Apesar de haver poucos desenvolvimentos tecnológicos nos últimos anos dentro da Ortodontia, a busca por tratamentos mais eficientes não cessou. Assim, o presente artigo visa analisar, de maneira lógica, como otimizar uma das fases do tratamento ortodôntico que mais demandam tempo: a correção da sobremordida exagerada. Pretende-se demonstrar como realizá-la concomitantemente ao alinhamento inicial, por meio de uma técnica denominada correção vertical precoce (CVP). Essa técnica utiliza dois cantilevers associados ao primeiro fio de alinhamento ortodôntico, mas não restritos a ele, a fim de iniciar a planificação da curva de Spee o mais cedo possível. Assim, o tempo de tratamento pode ser diminuído, já que duas fases do tratamento, normalmente realizadas de forma independente, podem ser realizadas ao mesmo tempo. Além disso, tanto o sistema de forças quanto os efeitos colaterais e os passos da execução da técnica serão devidamente apresentados e discutidos.

Retrospective 25-year follow-up of treatment outcomes in angle Class III patients : Early versus late treatment.

OBJECTIVES: To assess early versus late treatment of Class III syndrome for skeletal and dental differences. METHODS: Thirty-eight Class III patients treated with a chincup were retrospectively analyzed. Baseline data were obtained by reviewing pretreatment (T0) anamnestic records, cephalograms, and casts. The cases were assigned to an early or a late treatment group based on age at T0 (up to 9 years or older than 9 years but before the pubertal growth spurt). Both groups were further compared based on posttreatment data (T1) and long-term follow-up data collected approximately 25 years after treatment (T2). RESULTS: Early treatment was successful in 74% and late treatment in 67% of cases. More failures were noted among male patients. The late treatment group was characterized post therapeutically by significantly more pronounced skeletal parameters of jaw size relative to normal Class I values; in addition, a greater skeletal discrepancy between maxilla and mandible, higher values for mandibular length, Cond-Pog, ramus height, overjet, anterior posterior dysplasia indicator (APDI), lower anterior face height, and gonial angle were measured at T1. The angle between the AB line and mandibular plane was found to be larger at T0, T1, and T2, as well as more pronounced camouflage positions of the lower anterior teeth at T0. The early treatment group was found to exhibit greater amounts of negative overjet at T0 but more effective correction at T1. CONCLUSIONS: Early treatment of Class III syndrome resulted in greater skeletal changes with less dental compensation.

European College of Orthodontics: Commission of affiliation and titularisation.

Date of birth: 2/8/1982; sex: male. A. PRETREATMENT RECORDS: 25 years; 7/3/2008. DIAGNOSIS: Very severe Class III malocclusion in adult dentition in hyperdivergent facial pattern; Sagittal dimension: skeletal and dental Class II, severe alveolar retrusion of the mandibular incisors, negative overjet (-11mm); transverse dimension: Class III-related bilateral crossbite with no transverse maxillary deficiency; vertical dimension: incisor overbite, increased height of the lower facial third; Teeth missing prior to treatment: 16-26. TREATMENT PLAN: Appliances or procedures: multi-bracket bi-maxillary appliance and maxillofacial surgery; arch decompensation; maxillofacial surgery; fixed retainers; beginning of treatment: 26 years; 10/01/2009. B. POSTTREATMENT RECORDS: 17/2/2011; 28 years. DURATION OF ACTIVE TREATMENT: 25 months. RETENTION: Maxillary: 17/2/2011; mandibular: 17/2/2011. C. POST-RETENTION RECORDS: (1 year minimum): 25/04/2016; 33 years; duration of retention: lifelong. Post-retention duration: 5years and 2months.

Compensatory Class III malocclusion treatment associated with mandibular canine extractions.

Skeletal Class III malocclusions are ideally treated with orthodontic-surgical approaches. However, if there are no significant soft tissue implications and the patient does not want to undergo orthognatic surgery, other treatment options may be considered. The current case report describes a compensatory alternative for Class III malocclusion treatment, by means of mandibular canine extractions. This treatment alternative provided facial profile and occlusal improvement, which remains stable seven years posttreatment.