Study on the Antibacterial Activity and Bone Inductivity of Nanosilver/PLGA-Coated TI-CU Implants.

Background: Implants are widely used in the field of orthopedics and dental sciences. Titanium (TI) and its alloys have become the most widely used implant materials, but implant-associated infection remains a common and serious complication after implant surgery. In addition, titanium exhibits biological inertness, which prevents implants and bone tissue from binding strongly and may cause implants to loosen and fall out. Therefore, preventing implant infection and improving their bone induction ability are important goals. Purpose: To study the antibacterial activity and bone induction ability of titanium-copper alloy implants coated with nanosilver/poly (lactic-co-glycolic acid) (NSPTICU) and provide a new approach for inhibiting implant-associated infection and promoting bone integration. Methods: We first examined the in vitro osteogenic ability of NSPTICU implants by studying the proliferation and differentiation of MC3T3-E1 cells. Furthermore, the ability of NSPTICU implants to induce osteogenic activity in SD rats was studied by micro-computed tomography (micro-CT), hematoxylin-eosin (HE) staining, masson staining, immunohistochemistry and van gieson (VG) staining. The antibacterial activity of NSPTICU in vitro was studied with gram-positive Staphylococcus aureus (Sa) and gram-negative Escherichia coli (E. coli) bacteria. Sa was used as the test bacterium, and the antibacterial ability of NSPTICU implanted in rats was studied by gross view specimen collection, bacterial colony counting, HE staining and Giemsa staining. Results: Alizarin red staining, alkaline phosphatase (ALP) staining, quantitative real-time polymerase chain reaction (qRT-PCR) and western blot analysis showed that NSPTICU promoted the osteogenic differentiation of MC3T3-E1 cells. The in vitro antimicrobial results showed that the NSPTICU implants exhibited better antibacterial properties. Animal experiments showed that NSPTICU can inhibit inflammation and promote the repair of bone defects. Conclusion: NSPTICU has excellent antibacterial and bone induction ability, and has broad application prospects in the treatment of bone defects related to orthopedics and dental sciences.

Genioplasty - A Review.

Genioplasty, a key technique for dentofacial abnormalities, is essential for establishing facial harmony. This surgical procedure entails an osteotomy of the chin, which alters its three-dimensional location to restore overall face equilibrium. Modern genioplasty, which is frequently performed alone or in combination with rhinoplasty, facelifts, and orthognathic surgery, employs a variety of materials for chin augmentation, ranging from autologous to alloplastic. Recent improvements include porous graft materials such as high-density polyethylene. Despite the need for secure osteotomy segments, soft tissues around the mandible have a natural propensity to return to their original anatomical position. In the discipline of genioplasty, face esthetics and facial evaluation have been a prominent emphasis, with historical evidence emphasizing the relevance of the chin in harmony, balance, and character perception. Customized implants provide a single therapy for rare anatomical defects, generally with lower morbidity, making them critical for patients undergoing many procedures or suffering from syndromic disorders. Virtual surgical planning advances will continue to give dependable solutions for small and complex chin position issues. Modern surgeons will continue to combine history, anatomy, rigorous evaluation, excellent execution, and technological breakthroughs to achieve the best possible outcomes for their patients, raising their social standing.

Biomechanical and Histological Study of Retrieved LARS Synthetic Ligaments.

BACKGROUND: Synthetic grafts have been used for a number of years in anterior cruciate ligament (ACL) reconstruction surgery. One of the more recent additions to the stable of synthetic ligaments is the Ligament Augmentation and Reconstruction System (LARS) ligament. PURPOSE: To analyze the biomechanics and histology of LARS grafts retrieved due to failure of the device. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 22 LARS ligament grafts that were explanted from patients were sent for analysis. Five new, unused samples of the standard LARS ACL graft were also analyzed. Biomechanical testing was performed: ultimate tensile force, force versus displacement, and stress versus strain were recorded. Histopathological examination was performed looking for degree of fibrous tissue ingrowth as well as the presence of a foreign body reaction. RESULTS: Of the 22 grafts retrieved, 14 were used for ACL grafts, 1 for a lateral collateral ligament graft, 2 for medial collateral ligament grafts, 4 for gluteal tendon augmentation, and 1 for a supraspinatus augmentation. A severe foreign body reaction was found in 86% of the grafts (18/22) and a mild foreign body reaction in the remaining 14% (4/22). Tissue ingrowth was minimal in the majority of ACL grafts; the other grafts showed moderate tissue ingrowth. Maximal tensile force was significantly higher for the new ACL grafts (mean ± SD, 1667 ± 845 N) compared with the retrieved grafts (897 ± 395 N; P < .05). CONCLUSION: This study demonstrated that the vast majority of retrieved LARS artificial ligaments had a florid foreign body reaction. There was minimal tissue ingrowth in ACL grafts and moderate ingrowth in other grafts. Retrieved grafts had a decreased ultimate tensile force, which increased their risk of rupture. CLINICAL RELEVANCE: Surgeons should be cautious in choosing to use these grafts in reconstructive surgery for patients.

Physicochemical and Biological Properties of Vancomycin-Containing Antibacterial Polysaccharide Gels for Biocomposite Bone Implant Impregnation.

Polymeric drugs containing up to 60% by weight of the antibiotic vancomycin were synthesized based on dextran carriers activated with epichlorohydrin. Vancomycin was covalently bound, involving the primary amino group of the molecule through the hydroxypropyl radical to the C6 position of the anhydroglucose units of the dextran main chain. Covalent binding is necessary to prevent spontaneous release of the antibiotic from the gel, thereby reducing the risk of bacterial multiresistance. Antibacterial depot gels were obtained from those polymers, containing up to 17.5% by weight of polysaccharide with a cross-linking density of q = 3-5 nodes per macromolecule for the deposition of another type of drugs not covalently bound to the polymer gel. They were used to coat the surface of the internal pores of biocomposite bone implants based on bovine cancellous bone used in orthopedics. The chemical structure of the polymer was studied using 13C NMR spectroscopy and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry. The stiffness of the gels was evaluated by the values of the accumulation modulus G' = 170-270 kPa and the loss modulus G″ = 3.7-4.2 kPa determined on a rheometer. Their values are close to those typical for materials used to replace soft tissue in plastic surgery. The minimum inhibitory concentration of the gels against Staphylococcus aureus P209 depends on the antibiotic content in the polymer. It equals 2.5 mg/L for vancomycin we used and 100 mg/L for a polymer containing 50% by weight of covalently bound antibiotic. The cytotoxic concentration measured with cell culture HEK 293T exceeds 1200 mg/L in 24 h exposure. The release dynamics of drugs not covalently bound to dextran from the depot gel were studied using fluorescein as a model. The release time is independent of the gel density and lasts up to 6 days for a 2 mm thick layer. Both the gel and the bone implants impregnated with it maintained consistently high antibacterial activity throughout the experiment, up to its completion after 168 h, with the local concentration of the released antibiotic at the site of bacterial attack exceeding the therapeutic level by 200 times.

Effect of Corneal Allogenic Intrastromal Ring Segment (CAIRS) Implantation Surgery in Patients With Keratoconus According to Prior Corneal Cross-linking Status.

PURPOSE: To compare the effects of corneal allogenic intrastromal ring segment (CAIRS) implantation on topographical measurements and visual outcomes of patients with keratoconus with and without corneal cross-linking (CXL) prior to the time of implantation. METHODS: Sixty-seven eyes with corneal allograft intrastromal ring segment implantation (KeraNatural; Lions VisionGift) due to advanced keratoconus were included in the study. Thirty-seven eyes had no CXL and 30 eyes had had CXL before being referred to the authors. The changes in spherical equivalent (SE), uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), steep keratometry (K1), flat keratometry (K2), mean keratometry (Kmean), maximum keratometry (Kmax), and thinnest pachymetry were retrospectively analyzed 6 months after the implantation. RESULTS: The median age was 29 years in the CXL group and 24.0 years in the non-CXL group (P > .05), respectively. All topographical and visual parameters before implantation were similar in both groups (P > .05 for all parameters). At 6 months, CDVA, K1, and Kmean showed higher improvement in the non-CXL group than the CXL group (P = .030, .018, and .039, respectively). CONCLUSIONS: CAIRS surgery has a flattening effect on both the corneas with and without CXL. The cornea with prior CXL treatment had less flattening effect due to the stiffening effect of prior CXL. [J Refract Surg. 2024;40(6):e392-e397.].

[Management of patients with complex ear deformities]. / Prise en charge des patients présentant des déformations complexes du pavillon de l'oreille.

Complex ear reconstruction requires specialized multidisciplinary care. Most patients present with microtia, often associated with hearing disorders. The management of these disorders is a priority, and reconstruction of the external ear remains optional. Nowadays, auricular reconstruction is based on the subcutaneous implantation of either autologous cartilage or an allogeneic implant. Autologous reconstruction requires highly specialized surgical expertise and involves harvesting rib cartilage but carries a lower risk of exposure compared to allogeneic implants. Both techniques yield good results with a high success rate and have a positive impact on the social functioning and daily life of patients.

La reconstruction complexe du pavillon auriculaire nécessite une prise en charge multidisciplinaire spécialisée. La majorité des patients nécessitant ce geste présentent une microtie, souvent associée à des troubles de l'audition. La prise en charge de ceux-ci est prioritaire et la reconstruction du pavillon reste facultative. Aujourd'hui, la reconstruction du pavillon se base sur l'implantation sous-cutanée d'une maquette de cartilage autologue ou d'un implant allogène. La reconstruction autologue demande une expertise chirurgicale hautement spécialisée et nécessite un prélèvement de cartilage costal mais présente un risque d'exposition inférieur par rapport à l'implant allogène. Les deux techniques permettent d'atteindre de bons résultats avec un taux de réussite élevé et un effet positif sur le fonctionnement social et le quotidien des patients.

Challenges and Pitfalls of Research Designs Involving Magnesium-Based Biomaterials: An Overview.

Magnesium-based biomaterials hold remarkable promise for various clinical applications, offering advantages such as reduced stress-shielding and enhanced bone strengthening and vascular remodeling compared to traditional materials. However, ensuring the quality of preclinical research is crucial for the development of these implants. To achieve implant success, an understanding of the cellular responses post-implantation, proper model selection, and good study design are crucial. There are several challenges to reaching a safe and effective translation of laboratory findings into clinical practice. The utilization of Mg-based biomedical devices eliminates the need for biomaterial removal surgery post-healing and mitigates adverse effects associated with permanent biomaterial implantation. However, the high corrosion rate of Mg-based implants poses challenges such as unexpected degradation, structural failure, hydrogen evolution, alkalization, and cytotoxicity. The biocompatibility and degradability of materials based on magnesium have been studied by many researchers in vitro; however, evaluations addressing the impact of the material in vivo still need to be improved. Several animal models, including rats, rabbits, dogs, and pigs, have been explored to assess the potential of magnesium-based materials. Moreover, strategies such as alloying and coating have been identified to enhance the degradation rate of magnesium-based materials in vivo to transform these challenges into opportunities. This review aims to explore the utilization of Mg implants across various biomedical applications within cellular (in vitro) and animal (in vivo) models.

Facial Implants in Male Rejuvenation.

Many different methods achieve male facial augmentation. Arranged from shorter- to longer-term results, these methods include filler, fat/tissue grafting, fat/tissue transposition, and alloplastic implants. This study solely reviews allografts, which provide the most predictable hard-tissue augmentation. An array of alloplasts will be discussed in this study including chin, cheek, mandibular angle, frontal, and temporal implants. The most common and severe complications will also be explored with preventative and treatment algorithms.

Tumor de células gigantes esternal: esternectomía total y reconstrucción con barras de titanio más malla de polipropileno / Sternal Giant Cell Tumor: Total Sternectomy and Reconstruction with Titanium Rods Plus Polypropylene Mesh

El tumor de células gigantes (TCG) constituye un tumor óseo benigno relativamente frecuente. Se caracteriza por ser localmente agresivo y el lugar de presentación más frecuente es a nivel del esqueleto axial (fémur distal o tibia proximal). Hasta la actualidad, existen escasos informes de presentaciones atípicas, como a nivel del esternón. En este informe, se presenta el caso de una paciente mujer de 24 años que presenta tumoración indurada a nivel de la región esternal de crecimiento progresivo asociado a dolor. Los hallazgos radiológicos revelan tumoración osteolítica que tiene como origen el cuerpo del esternón y lo compromete casi en su totalidad. Este se proyecta hacia las partes blandas y llega al plano superficial. Debido a la extensión de la enfermedad y al compromiso extenso en el cuerpo del esternón, se realiza la resección del cuerpo y manubrio esternal. El defecto es reconstruido con malla de polipropileno, barras de titanio, parche de epiplón y autoinjerto de piel; se obtiene una adecuada estabilidad de la caja torácica y resultados estéticos favorables. El caso tiene un adecuado manejo oncológico puesto que la resección es completa con márgenes microscópicos libres (resección R0).

Giant cell tumor (GCT) constitutes a relatively common benign bone tumor, characteri-zed by its local aggressiveness. The most frequent site of occurrence is in the axial ske-leton (distal femur or proximal tibia). To date, there have been few reports of atypical presentations, such as at the level of the sternum. In this report, we present the case of a 24-year-old female patient who presented with an indurated mass in the sternal region, progressively growing and associated with pain. Radiological findings revealed an osteolytic mass originating from the body of the sternum, involving almost its entire extent and projecting into the soft tissues, reaching the superficial plane. Due to the extent of the disease and the extensive involvement of the sternal body, resection of the body and manubrium of the sternum was performed. The surgical defect was reconstructed with polypropylene mesh, titanium bars, an omental patch and a skin graft, achieving adequate stability of the thoracic cage and favorable cosmetic results.

Causes of Corneal Melt After the Boston Keratoprosthesis Type I: The Chinese People's Liberation Army General Hospital Experience.

PURPOSE: The purpose of this study was to evaluate the long-term incidence, risk factors, and the management of corneal melt following Boston type I keratoprosthesis (B-KPro I) implantation. METHODS: This is a retrospective observational case series. Data were collected regarding demographics, preoperative characteristics, incidence, and outcomes of corneal melt in 102 patients who underwent B-KPro I in the Chinese PLA General Hospital between 2011 and 2018, with a follow-up period ranging from 4 to 11 years. RESULTS: Chemical burn was the most common indication for B-KPro I (n = 56; 53.8%), followed by ocular trauma (n = 26; 25.0%). During the follow-up period (107 ± 25.7 months), corneal melt occurred in 60 cases among 37 eyes (35.6%), with an incidence of 20.2% at 1 year after surgery. Fourteen cases presented with recurrent corneal melt. Patients with multiple corneal allograft failures had a higher risk of corneal melt. Thermal burns, compared with alkali burns, significantly elevated the odds ratio (OR) of corneal melt (OR, 5.11; 95% confidence interval, 1.05-24.86; P = 0.043). CONCLUSIONS: Corneal melt significantly reduced the retention time of KPro ( P < 0.01), and its coexistence with other complications further shortened the retention time. A specific pattern of corneal melt occurrence was identified, with a peak incidence at 1 year postoperatively. Our findings suggest variations in the risk of corneal melt among different indications, with thermal burns carrying the highest OR. Moreover, each previous failed keratoplasty doubled the risk of corneal melt after B-KPro I.

Evaluation optimum ratio of synthetic bone graft material and platelet rich fibrin mixture in a metal 3D printed implant to enhance bone regeneration.

BACKGROUND: This study aims to evaluate the optimal ratio of synthetic bone graft (SBG) material and platelet rich fibrin (PRF) mixed in a metal 3D-printed implant to enhance bone regeneration. METHODS: Specialized titanium hollow implants (5 mm in diameter and 6 mm in height for rabbit; 6 mm in diameter and 5 mm in height for pig) were designed and manufactured using 3D printing technology. The implants were divided into three groups and filled with different bone graft combinations, namely (1) SBG alone; (2) PRF to SBG in 1:1 ratio; (3) PRF to SBG in 2:1 ratio. These three groups were replicated tightly into each bone defect in distal femurs of rabbits (nine implants, n = 3) and femoral shafts of pigs (fifteen implants, n = 5). Animal tissue sections were obtained after euthanasia at the 8th postoperative week. The rabbit specimens were stained with analine blue, while the pig specimens were stained with Masson-Goldner's trichrome stain to perform histologically examination. All titanium hollow implants were well anchored, except in fracture specimens (three in the rabbit and one fracture in the pig). RESULT: Rabbit specimens under analine blue staining showed that collagen tissue increased by about 20% and 40% in the 1:1 ratio group and the 2:1 ratio group, respectively. Masson-Goldner's trichrome stain results showed that new bone growth increased by 32% in the 1:1 ratio PRF to SBG, while - 8% in the 2:1 ratio group. CONCLUSION: This study demonstrated that placing a 1:1 ratio combination of PRF and SBG in a stabilized titanium 3D printed implant resulted in an optimal increase in bone growth.

Fabrication and evaluation of porous coatings doped with bioactive elements on titanium surfaces.

OBJECTIVE: Although pure titanium (PT) and its alloys exhibit excellent mechanical properties, they lack biological activity as implants. The purpose of this study was to improve the biological activity of titanium implants through surface modification. MATERIALS AND METHODS: Titanium was processed into titanium discs, where the titanium discs served as anodes and stainless steel served as cathodes, and a copper- and cobalt-doped porous coating [pure titanium model (PTM)] was prepared on the surface of titanium via plasma electrolytic oxidation. The surface characteristics of the coating were evaluated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and profilometry. The corrosion resistance of PTM was evaluated with an electrochemical workstation. The biocompatibility and bioactivity of coated bone marrow mesenchymal stem cells (BMSCs) were evaluated through in vitro cell experiments. RESULTS: A copper- and cobalt-doped porous coating was successfully prepared on the surface of titanium, and the doping of copper and cobalt did not change the surface topography of the coating. The porous coating increased the surface roughness of titanium and improved its resistance to corrosion. In addition, the porous coating doped with copper and cobalt promoted the adhesion and spreading of BMSCs. CONCLUSIONS: A porous coating doped with copper and cobalt was prepared on the surface of titanium through plasma electrolytic oxidation. The coating not only improved the roughness and corrosion resistance of titanium but also exhibited good biological activity.

Three-dimensional printed custom-made modular talus prosthesis in patients with talus malignant tumor resection.

BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.

Etiology, pathogenesis, and management of angiosarcoma associated with implants and foreign body: Clinical cases and research updates.

Angiosarcomas are rare and highly malignant soft tissue sarcomas originating from endothelial cells lining the lymphatic or vascular system. While they predominantly emerge from (sub)cutaneous regions, occurrences have been reported throughout the body. The etiology of angiosarcoma remains elusive in most clinical cases. Nevertheless, several prognosis risk factors play a pivotal role, including chronic lymphedema, therapeutic irradiation, environmental carcinogens, familial syndromes, and the presence of foreign materials like metallic objects and biomedical implants. Despite evidence implicating retained foreign material in angiosarcoma development, understanding its prognosis and pathogenesis remains limited. The pathogenesis of angiosarcoma appears to involve a complex interplay of chronic inflammation, tissue remodeling, and genetic factors that create a conducive microenvironment for malignant transformation. Management of these sarcomas remains challenging due to their infiltrative nature owing to the high chance of metastasis and local recurrence. The primary treatment modalities currently include surgery, radiotherapy, and chemotherapy, but recent advances in targeted immunotherapy and gene therapy hold promise for more effective approaches. This comprehensive review delves into the potential etiological and pathogenic roles of foreign materials, such as metallic objects, biomedical implants, and biomaterials, in the development of angiosarcoma. Further research into the underlying molecular mechanisms could provide valuable insights for tailored management and developing novel targeted therapeutic strategies.

Balancing Bioresponsive Biofilm Eradication and Guided Tissue Repair via Pro-Efferocytosis and Bidirectional Pyroptosis Regulation during Implant Surgery.

There is an increasingly growing demand to balance tissue repair guidance and opportunistic infection (OI) inhibition in clinical implant surgery. Herein, we developed a nanoadjuvant for all-stage tissue repair guidance and biofilm-responsive OI eradication via in situ incorporating Cobaltiprotoporphyrin (CoPP) into Prussian blue (PB) to prepare PB-CoPP nanozymes (PCZs). Released CoPP possesses a pro-efferocytosis effect for eliminating apoptotic and progressing necrotic cells in tissue trauma, thus preventing secondary inflammation. Once OIs occur, PCZs with switchable nanocatalytic capacity can achieve bidirectional pyroptosis regulation. Once reaching the acidic biofilm microenvironment, PCZs possess peroxidase (POD)-like activity that can generate reactive oxygen species (ROS) to eradicate bacterial biofilms, especially when synergized with the photothermal effect. Furthermore, generated ROS can promote macrophage pyroptosis to secrete inflammatory cytokines and antimicrobial proteins for biofilm eradication in vivo. After eradicating the biofilm, PCZs possess catalase (CAT)-like activity in a neutral environment, which can scavenge ROS and inhibit macrophage pyroptosis, thereby improving the inflammatory microenvironment. Briefly, PCZs as nanoadjuvants feature the capability of all-stage tissue repair guidance and biofilm-responsive OI inhibition that can be routinely performed in all implant surgeries, providing a wide range of application prospects and commercial translational value.

Bronchial Valves for Persistent Air Leak: A Systematic Review and Meta-analysis.

BACKGROUND: Patients with persistent air leak (PAL) pose a therapeutic challenge to physicians, with prolonged hospital stays and high morbidity. There is little evidence on the efficacy and safety of bronchial valves (BV) for PAL. METHODS: We systematically searched the PubMed and Embase databases to identify studies evaluating the efficacy and safety of BV for PAL. We calculated the success rate (complete resolution of air leak or removal of intercostal chest drain after bronchial valve placement and requiring no further procedures) of BV for PAL in individual studies. We pooled the data using a random-effects model and examined the factors influencing the success rate using multivariable meta-regression. RESULTS: We analyzed 28 observational studies (2472 participants). The pooled success rate of bronchial valves in PAL was 82% (95% confidence intervals, 75 to 88; 95% prediction intervals, 64 to 92). We found a higher success rate in studies using intrabronchial valves versus endobronchial valves (84% vs. 72%) and in studies with more than 50 subjects (93% vs. 77%). However, none of the factors influenced the success rate of multivariable meta-regression. The overall complication rate was 9.1% (48/527). Granulation tissue was the most common complication reported followed by valve migration or expectoration and hypoxemia. CONCLUSION: Bronchial valves are an effective and safe option for treating PAL. However, the analysis is limited by the availability of only observational data.

An Update on Implant-Associated Malignancies and Their Biocompatibility.

Implanted medical devices are widely used across various medical specialties for numerous applications, ranging from cardiovascular supports to orthopedic prostheses and cosmetic enhancements. However, recent observations have raised concerns about the potential of these implants to induce malignancies in the tissues surrounding them. There have been several case reports documenting the occurrence of cancers adjacent to these devices, prompting a closer examination of their safety. This review delves into the epidemiology, clinical presentations, pathological findings, and hypothesized mechanisms of carcinogenesis related to implanted devices. It also explores how the surgical domain and the intrinsic properties and biocompatibility of the implants might influence the development of these rare but serious malignancies. Understanding these associations is crucial for assessing the risks associated with the use of medical implants, and for developing strategies to mitigate potential adverse outcomes.

An Advanced Human Bone Tissue Culture Model for the Assessment of Implant Osteointegration In Vitro.

In the field of biomaterials for prosthetic reconstructive surgery, there is the lack of advanced innovative methods to investigate the potentialities of smart biomaterials before in vivo tests. Despite the complex osteointegration process being difficult to recreate in vitro, this study proposes an advanced in vitro tissue culture model of osteointegration using human bone. Cubic samples of trabecular bone were harvested, as waste material, from hip arthroplasty; inner cylindrical defects were created and assigned to the following groups: (1) empty defects (CTRneg); (2) defects implanted with a cytotoxic copper pin (CTRpos); (3) defects implanted with standard titanium pins (Ti). Tissues were dynamically cultured in mini rotating bioreactors and assessed weekly for viability and sterility. After 8 weeks, immunoenzymatic, microtomographic, histological, and histomorphometric analyses were performed. The model was able to simulate the effects of implantation of the materials, showing a drop in viability in CTR+, while Ti appears to have a trophic effect on bone. MicroCT and a histological analysis supported the results, with signs of matrix and bone deposition at the Ti implant site. Data suggest the reliability of the tested model in recreating the osteointegration process in vitro with the aim of reducing and refining in vivo preclinical models.

Back to the Roots: Reconstructing Large and Complex Cranial Defects using an Image-based Statistical Shape Model.

Designing implants for large and complex cranial defects is a challenging task, even for professional designers. Current efforts on automating the design process focused mainly on convolutional neural networks (CNN), which have produced state-of-the-art results on reconstructing synthetic defects. However, existing CNN-based methods have been difficult to translate to clinical practice in cranioplasty, as their performance on large and complex cranial defects remains unsatisfactory. In this paper, we present a statistical shape model (SSM) built directly on the segmentation masks of the skulls represented as binary voxel occupancy grids and evaluate it on several cranial implant design datasets. Results show that, while CNN-based approaches outperform the SSM on synthetic defects, they are inferior to SSM when it comes to large, complex and real-world defects. Experienced neurosurgeons evaluate the implants generated by the SSM to be feasible for clinical use after minor manual corrections. Datasets and the SSM model are publicly available at https://github.com/Jianningli/ssm .