Orthognathic surgery: a significant tool for reassessment / La chirurgie orthognathique : un outil à ne pas oublier dans la réévaluation

Introduction: More than 15 years of experience in orthodontic-surgical collaboration has allowed the authors to identify some situations in which a new perspective is needed. Although it may seem easy to refer a patient to a maxillo-facial surgeon in cases of major dysmorphoses, this can lead to yet other dilemmas: a loss of results at the end of a developmental growth stage, an adult requesting a return to treatment after a camouflage orthodontic treatment or a non-cooperative child in an interceptive and preventive treatment phase. Then, a comprehensive process of reassessment becomes compulsory. Material and Method: In the form of an editorial, this article describes various cases encountered in the authors' practice. Discussion: The aim is not to point out the imperfections of our humanity, but simply to open our eyes to diagnostic elements that are missed, whether in the initial phase or during reassessment. Conclusion: As it is far from ideal to keep offering similar therapies that lead to the same pitfalls, it is time for a shift in the paradigm.

Introduction: Plus de 15 ans de recul en collaboration orthodontico-chirurgicale ont permis aux auteurs d'identifier un certain nombre de situations dans lesquelles un regard différent est devenu opportun. S'il est aisé d'orienter un patient vers un(e) chirurgien(ne) maxillo-facial(e) en cas de dysmorphoses majeures, les orthodontistes sont régulièrement confrontés à d'autres dilemmes : une perte de résultat en fin de croissance, un adulte demandeur d'une reprise après un traitement en compensation ou encore un enfant non-coopérant en phase interceptive. Une phase de réévaluation exhaustive devient alors nécessaire. Matériel et méthode: Sous la forme d'un éditorial, cet article expose différentes situations cliniques auxquelles les auteurs ont été confrontés lors de leur pratique. Discussion: Le propos n'est pas de pointer les imperfections de notre humanité mais seulement d'ouvrir les yeux sur des éléments diagnostiques qui échappent, que ce soit en phase initiale ou en réévaluation. Conclusion: Offrir une thérapeutique identique conduisant aux mêmes écueils n'est pas acceptable : il est temps de changer de paradigme.

Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

Facial Asymmetry Caused by Mandibular Condylar Hyperplasia: A Two Center Study.

BACKGROUND: Condylar hyperplasia is a non-neoplastic overgrowth of the mandibular condyle. The disorder is progressive and causes gradual jaw deviation, facial asymmetry, and dental malocclusion. The only treatment capable of stopping hyperplastic growth is surgical condylectomy to remove the upper portion of the condyle containing the deranged growth center. When this procedure is conducted in proportion to the length of the healthy side it may also correct the jaw deviation and facial asymmetry. OBJECTIVES: To assess the degree to which condylectomy corrects the asymmetry and to determine the proportion of patients after condylectomy who were satisfied with the esthetic result and did not desire further corrective surgery. METHODS: We conducted a retrospective analysis of medical records of patients who underwent condylectomy that was not followed by corrective orthognathic surgery for at least 1 year to determine the degree of correction of chin deviation and lip cant. Patient satisfaction from treatment or desire and undergo further corrective surgery was reported. RESULTS: Chin deviation decreased after condylectomy from a mean of 4.8° to a mean of 1.8° (P < 0.001). Lip cant decreased after condylectomy from a mean of 3.5° to a mean of 1.5° (P < 0.001). Most patients (72%) were satisfied with the results and did not consider further corrective orthognathic surgery. CONCLUSIONS: Proportional condylectomy could be a viable treatment to both arrest the condylar overgrowth and achieve some correction of the facial asymmetry.

Assessment of Masseter Volume and Postoperative Stability After Orthognathic Surgery in Patients With Skeletal Class III Malocclusion With Facial Asymmetry.

OBJECTIVE: This study aimed to evaluate the effect of orthognathic surgery on masseter volume in patients with skeletal Class III malocclusion with facial asymmetry and the effect of masseter volume on stability in orthognathic surgery. METHODS: This research studied 16 patients with Class III malocclusion with facial asymmetry who received combined orthodontic-orthognathic treatment and underwent craniofacial computed tomography (CT) before (T0), 2 weeks after (T1), and 6 months after (T2) surgery. Three-dimensional (3D) CT images were retrospectively analyzed, using 3D volume reconstruction to obtain the masseter volume and examine the impact of the masseter volume on stability in orthognathic surgery. RESULTS: A statistically significant difference ( P < 0.05) in the volume of the masseter was found up to 6 months after orthognathic surgery compared with the preoperative period, and the reduction in the masticatory muscle volume on the lengthened side is greater than on the shortened side ( P < 0.05). The volume of both masseters differed according to facial asymmetry, and the difference was significantly reduced after orthognathic surgery ( P < 0.05). During the period time (T1-T2), cephalometric maxillary marker points were not significantly different ( P > 0.05), and mandibular marker points were significantly anteriorly shifted ( P < 0.05). There was an association between the masseter volume and anterior shift of point B (R > 0.5, P < 0.05), the upward and anterior shifts of the gonion point differed between the lengthened and shortened sides ( P < 0.05). CONCLUSION: The size of the masseter becomes smaller 6 months after orthognathic surgery, and orthognathic surgery improves both bone and soft tissue symmetry. A larger sagittal relapse of mandibular setback occurred in patients with greater masseter volume. Considering these alterations may be helpful in planning orthognathic surgery.

Photographic Parameters in Three-Dimensional Facial Image Acquisition. A Scoping Review.

OBJECTIVE: Orthognathic surgery is a viable and reproducible treatment for facial deformities. Despite the precision of the skeletal planning of surgical procedures, there is little information about the relations between hard and soft tissues in three-dimensional (3D) analysis, resulting in unpredictable soft tissue outcomes. Three-dimensional photography is a viable tool for soft tissue analysis because it is easy to use, has wide availability, low cost, and is harmless. This review aims to establish parameters for acquiring consistent and reproducible 3D facial images. METHODS: A scoping review was conducted across PubMed, SCOPUS, Scientific Electronic Library Online (SciELO), and Web of Science databases, adhering to "Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews" guidelines. Articles presenting 3D facial photographs in the diagnostic phase were considered. RESULTS: A total of 79 articles were identified, of which 29 were selected for analysis. CONCLUSION: The predominant use of automated systems like 3dMD and VECTRA M3 was noted. User positioning has highest agreement among authors. Noteworthy aspects include the importance of proper lighting, facial expression, and dental positioning, with observed discrepancies and inconsistencies among authors. Finally, the authors proposed a 3D image acquisition protocol based on this research findings.

Determining the position of the lingula and the mandibular foramen using the antilingula in orthognathic surgery.

BACKGROUND: The antilingula located on the lateral surface of the mandibular ramus has been served as a surgical landmark for the mandibular foramen on the medial surface for decades. However, whether the antilingula truly represents the lingula which is the bony prominence overlapping the mandibular foramen, or the foramen itself, is still unclear. This study thus aimed to examine the position of the antilingula in relation to three reference points: the lingula, the anterior and the posterior borders of the mandibular foramen, as well as to the reference plane used in the inferior alveolar nerve block, and to the posterior border of the mandible. METHODS: This observational study was performed in 113 Thai dry mandibles. The antilingula were identified followed by transferring the reference points to the lateral surface. The distances from the antilingula to the reference points, the reference plane and the posterior border of the ramus were then measured. Chi-square test was calculated for side-dependency of the antilingula. Paired t-test was calculated for difference in measurements in left and right sides. RESULTS: The antilingula could be identified in 92.48% of the mandibles with 86.67 - 90.00% accuracy and 86.67% reliability. There was no significant difference in the presence of the antilingula on left and right sides (p = 0.801). Only 2.5% and 0.83% of the antilingula correspond to the lingula and the anterior border of the mandibular foramen, respectively. However, 85% of the reference points were located within 11 mm radius. The antilingula was found located 2.80 mm inferior to the reference plane and 16.84 mm from the posterior border of the ramus. CONCLUSIONS: The antilingula does not concur with the reference points on the medial surface. Our study also suggests that the safe area for vertical osteotomy is 11 mm posterior to the antilingula or at 30% of the length from the posterior border parallel to the occlusal plane. The use of more accurate techniques in localizing the mandibular foramen combined with the antilingula is more recommended than using the antilingula as a sole surgical guide.

Change in taste sensation after orthognathic surgery.

OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).

Changes in masseter muscle morphology after surgical-orthodontic treatment in patients with skeletal Class III malocclusion with mandibular asymmetry: The automatic masseter muscle segmentation model.

INTRODUCTION: This study evaluated the masseter muscle changes after surgical-orthodontic treatment in patients with a skeletal Class III malocclusion using automatic segmentation. METHODS: Images of 120 patients with skeletal Class III malocclusion were obtained and reconstructed at T0 (pretreatment), T1 (presurgery), and T2 (6-12-month postsurgery). The patients were divided into symmetrical and asymmetrical groups. The volume, major axis length, maximum cross-sectional area, horizontal cross-sectional area 5 mm above the mandibular foramen (CSAF), and orientation were calculated automatically. RESULTS: In the asymmetrical group, the volume and major axis length on the deviated side were lower than on the nondeviated side at T0, T1, and T2 (P <0.05). There were no significant differences in maximum cross-sectional area and CSAF bilaterally. The orientation was coronally more vertical and sagittally more forward on the deviated side (both P <0.001). In the symmetrical group, there were no significant bilateral differences at T0, T1, and T2. The volume, major axis length, and CSAF decreased, and the coronal orientation was more vertical on the nondeviated side at T2 than at T0 in both groups (P <0.05). The coronal plane orientation was more inclined on the deviated side at T2 than at T0 in the asymmetrical group (P <0.05). CONCLUSIONS: The smaller volume on the deviated side at T2 indicates the need for myofunctional training after surgery. The masseter muscle volume and the cross-sectional area did not recover to the preorthodontic levels. Studies with longer follow-up durations are needed to confirm these findings.

Comparison between one-jaw and two-jaw designs in virtual surgery planning for patients with class III malocclusion.

Orthognathic surgery is highly effective for treating maxillomandibular discrepancies in patients with class III malocclusion. However, whether one- or two-jaw surgery should be selected remains controversial. Our study aimed to evaluate quantitative differences between one-jaw and two-jaw surgical designs. In total, 100 consecutive patients with skeletal class III malocclusion who underwent orthognathic surgery with preoperative three-dimensional simulation between August 2016 and November 2021 were recruited. Based on the same final occlusal setup, a two-jaw surgery design and two types of one-jaw design were created. In total, 400 image sets, including preoperative images and three types of surgical simulation, were measured and compared. The one-jaw mandibular setback design led to improvement in most cephalometric measurements and facial symmetry. Although the one-jaw maxillary advancement design improved the ANB angle and facial convexity, it induced maxillary protrusion and reduced facial symmetry. Compared with the other designs, the two-jaw design provided significantly closer cephalometric measurements to the normative values, better symmetry, and less occlusal cant. Overall, the two-jaw design provided a quantitatively better facial appearance in terms of symmetry, proportion, and profile. Although an optimal surgical design necessitates thorough preoperative evaluation and a shared decision-making process, two-jaw surgery can be considered for improving overall facial esthetics and harmony.

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Evaluating changes in the condylar head after orthognathic surgery with or without articular disc repositioning: a systematic review.

Failures in orthognathic surgery are associated with different factors, including those related to untreated or undiagnosed preoperative temporomandibular joint (TMJ) disorders. This systematic review aimed to assess potential alterations in the condylar head following orthognathic surgery. A systematic search for randomised controlled trials and retrospective studies was performed. For inclusion in the review, studies had to meet the following eligibility criteria according to the PICO framework: Patients: patients with orthognathic deformity and temporomandibular dysfunction (or temporomandibular osteoarthritis); Intervention: patients submitted to orthognathic surgery concomitantly with TMJ disjunction; Control: patients undergoing only orthognathic surgery with or without presurgical data; and Outcome: changes in temporomandibular joint position and volume. Nine studies met all the inclusion criteria and were selected for qualitative analysis. The results of this review show that simultaneous articular disc repositioning and orthognathic surgery provide better results in patients with preoperatively diagnosed condylar osteoarthritic changes. In conclusion, condylar remodelling (resorption/deposition) and its extent are determined by the direction of condylar displacement during surgery. Other factors such as age are also associated with the development of condylar resorption.

The online attention analysis on orthognathic surgery research.

OBJECTIVES: Altmetrics is one of the fields of bibliometrics that seeks to assess the impact and interest of a given subject through Internet users. The aim of this study is to make an altmetric analysis of the orthognathic surgery literature. METHODS: A literature search was conducted using Dimensions app up to December 2023. A list of the 100 most mentioned articles on the topic was compiled. A Google Trends search was performed with same strategy to visualize important data regarding internet search. Charts and tables were created using Microsoft Excel and VOSviewer software to allow bibliometric visualization. RESULTS: There was a very poor correlation between the number of mentions and the number of citations (r = 0.0202). Most articles discussed on technical innovations associated to orthognathic surgery, majority related to virtual planning (n = 26). Other topics considered interesting to internet readers were complications (n = 18), surgical technique (n = 14), and psychological aspects/quality of life (n = 13). CONCLUSION: Online interest in orthognathic surgery closely aligns with the level of academic interest but is also influenced by factors such as location and economic status. The internet is a powerful tool for disseminating scientific research to a broad audience, making it more accessible and engaging than traditional academic channels.

Validation of a fully automatic three-dimensional assessment of orthognathic surgery.

The aim of the present study was to propose and validate FAST3D: a fully automatic three-dimensional (3D) assessment of the surgical accuracy and the long-term skeletal stability of orthognathic surgery. To validate FAST3D, the agreement between FAST3D and a validated state-of-the-art semi-automatic method was calculated by intra-class correlation coefficients (ICC) at a 95 % confidence interval. A one-sided hypothesis test was performed to evaluate whether the absolute discrepancy between the measurements produced by the two methods was statistically significantly below a clinically relevant error margin of 0.5 mm. Ten subjects (six male, four female; mean age 24.4 years), class II and III, who underwent a combined three-piece Le Fort I osteotomy, bilateral sagittal split osteotomy and genioplasty, were included in the validation study. The agreement between the two methods was excellent for all measurements, ICC range (0.85-1.00), and fair for the rotational stability of the chin, ICC = 0.54. The absolute discrepancy for all measurements was statistically significantly lower than the clinical relevant error margin (p < 0.008). Within the limitations of the present validation study, FAST3D demonstrated to be reliable and may be adopted whenever appropriate in order to reduce the work load of the medical staff.

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Comparative Analysis of Temperature-Responsive Hydrogel (PF 72) for Postoperative Pain After Bimaxillary Surgery: A Retro-spective Study.

Bimaxillary surgery is a painful invasive procedure in plastic surgery. Pain control is typically achieved using intravenous analgesics. We aimed to investigate the efficacy of a novel temperature-responsive hydrogel, PF72, mixed with ropivacaine, as a local pain management solution when applied directly to the surgical site following orthognathic surgery. The study was conducted from October 2022 to July 2023 and included a cohort of 40 candidates for orthognathic surgery, encompassing LeFort I maxillary ostectomy and sagittal split ramus osteotomy. The participants were divided into an Injection group (n = 20), where PF72 was administered at the surgical site before the orthognathic surgery, and a Control group (n = 20), which relied solely on intravenous analgesics. Pain was evaluated at 3, 6, 24, 48, and 72 h after surgery using a numerical rating scale (NRS). The mean NRS scores at 24 h were 6.35 and 4 for the Control and Injection groups, respectively. The mean NRS scores at 72 h were 3.4 and 2.55 for the Control and Injection groups, respectively. Patients who received PF72 experienced less pain than those who received intravenous analgesics. These findings underscore the potential of PF72 as an effective alternative for enhancing pain management in patients undergoing orthognathic surgery.Level of Evidence III Therapeutic study. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

OrthoCalc: The six degrees of freedom measurement workflow of rotational and displacement changes for maxilla positioning evaluation.

BACKGROUND: This study is undertaken to establish the accuracy and reliability of OrthoCalc, a 3D application designed for the evaluation of maxillary positioning. METHODS: We registered target virtual planned models, maxillary models from pre-operative and post-operative CT scans, and post-operative intra-oral scans to a common reference system, allowing for digital evaluation. To assess rotational changes, we introduced a novel measurement method based on virtual cuboid models. Displacement errors were calculated based on proposed registration matrices. We also compared OrthoCalc to established commercial medical software as a benchmark. RESULTS: Statistical significance calculated showed no significant differences between OrthoCalc and commercial software. the biggest error of 0.04 degree in rotation change was found in the yaw. A maximum displacement change of 0.75 mm was found in the X direction. CONCLUSIONS: Our study validates OrthoCalc as a precise and reliable tool for assessing maxillary position changes with six degrees of freedom in orthognathic surgery, endorsing its clinical utility.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

[Comparison of the virtual surgical planning position of maxilla and condyle with the postoperative real position in patients with mandibular protrusion].

OBJECTIVE: To compare the difference between virtual surgical planning (VSP) position and postoperative real position of maxilla and condyle, and to explore the degree of intraoperative realization of VSP after orthognathic surgery. METHODS: In this study, 36 patients with mandibular protrusion deformity from January 2022 to December 2022 were included. All the patients had been done bilateral sagittal split ramus osteotomy (SSRO) combined with Le Fort Ⅰ osteotomy under guidance of VSP. The VSP data (T0) and 1-week postoperative CT (T1) were collected, the 3D model of postoperative CT was established and segmented into upper and lower jaws in CCMF Plan software. At the same time, accor-ding to the morphology of palatal folds, the virtual design was registered with the postoperative model, and the unclear maxillary dentition in the postoperative model was replaced. Then the postoperative model was matched with VSP model by registration of upper skull anatomy that was not affected by the operation. The three-dimensional reference plane and coordinate system were established. Selecting anatomical landmarks and their connections of condyle and maxilla for the measurement, we compared the coordinate changes of marker points in three directions, and the angle changes between the line connecting the marker points and the reference plane to analyze the positional deviation and the angle deviation of the postoperative condyle and maxilla compared to VSP. RESULTS: The postoperative real position of the maxilla deviates from the VSP by nearly 1 mm in the horizontal and vertical directions, and the anteroposterior deviation was about 1.5 mm. In addition, most patients had a certain degree of counterclockwise rotation of the maxilla after surgery. Most of the bilateral condyle moved forward, outward and downward (the average distance deviation was 0.15 mm, 1.54 mm, 2.19 mm, respectively), and rotated forward, outward and upward (the average degree deviation was 4.32°, 1.02°, 0.86°, respectively) compared with the VSP. CONCLUSION: VSP can be mostly achieved by assistance of 3D printed occlusal plates, but there are certain deviations in the postoperative real position of maxilla and condyle compared with VSP, which may be related to the rotation axis of the mandible in the VSP. It is necessary to use patient personalized condylar rotation axis for VSP, and apply condylar positioning device to further improve surgical accuracy.

Three-dimensional positioning of the maxilla using novel intermediate splints in maxilla-first orthognathic surgery for correction of skeletal class III deformity.

OBJECTIVES: Successful orthognathic surgery requires accurate transfer of the intraoperative surgical plan. This study aimed to (1) evaluate the surgical error of a novel intermediate splint in positioning the maxilla during maxilla-first orthognathic surgery and (2) determine factors influencing surgical error. MATERIALS AND METHODS: This prospective study examined 83 patients who consecutively underwent Le Fort I osteotomy for correction of skeletal class III deformity using a novel intermediate splint and a bilateral sagittal split osteotomy. Surgical error was the outcome variable, measured as the difference in postoperative translational and rotational maxillary position from the virtual plan. Measures included asymmetry, need and amount for mandibular opening during fabrication of intermediate splints, and planned and achieved skeletal movement. RESULTS: Mean errors in translation for vertical, sagittal, and transversal dimensions were 1.0 ± 0.7 mm, 1.0 ± 0.6 mm, and 0.7 ± 0.6 mm, respectively; degrees in rotation for yaw, roll, and pitch were 0.8 ± 0.6, 0.6 ± 0.4, and 1.6 ± 1.1, respectively. The transverse error was smaller than sagittal and vertical errors; error for pitch was larger than roll and yaw (both p < 0.001). Error for sagittal, transverse, and roll positioning was affected by the achieved skeletal movement (roll, p < 0.05; pitch and yaw, p < 0.001). Surgical error of pitch positioning was affected by planned and achieved skeletal movement (both p < 0.001). CONCLUSIONS: Using the novel intermediate splint when performing Le Fort I osteotomy allowed for accurate positioning of the maxilla. CLINICAL RELEVANCE: The novel intermediate splint for maxillary positioning can be reliably used in clinical routines.

Surgery-first in interdisciplinary class II cases.

OBJECTIVES: To present an interdisciplinary case treated with a surgery-first orthognathic approach, followed by orthodontic and prosthodontic treatment. CLINICAL CONSIDERATIONS: After an accurate pre-operative virtual planning, a young patient with skeletal class II, retrognathia, and an anterior open bite was treated with bimaxillary orthognathic surgery without pre-surgical orthodontic decompensation. Orthodontic treatment was carried out post-operatively. The treatment was completed with a prosthodontic phase to improve the final esthetic outcome of the smile. CONCLUSIONS: A surgery-first approach allowed to achieve esthetic and functional results in a reduced treatment duration that remained stable over the course of 1 year. The outcomes were consistent with prior research in terms of advantages brought by following an accurately planned surgery-first protocol. Nevertheless, longer-term follow-up was required to evaluate the treatment stability. CLINICAL SIGNIFICANCE: An accurately planned surgery-first approach significantly helped in shortening the duration of the treatment, while providing a stable, functional, and esthetic solution to the patient's problems.