Comparison of reconstruction plates and miniplates in mandibular defect reconstruction with free iliac flap.

OBJECTIVE: Given the increasing demand for precise and reliable reconstructive techniques in maxillofacial surgery, we try to offer valuable insights for clinicians in selecting optimal fixation methods. MATERIALS AND METHODS: Patients were categorized into miniplate and reconstruction plate groups for accuracy and bone healing comparison. We measured gonial angle, intercondylar, intergonial and anterior-posterior distance for general accuracy and distance of segmental endpoint to the sagittal plane for partial accuracy. The bone healing rate of the two groups was compared with CT images at 3, 6 and 12 months after operation. RESULT: Considering directional indicators, the miniplate group exhibited a wider intercondylar distance than the reconstruction plate group (p = 0.029). At 6 months postoperatively, the miniplate group demonstrated a higher bone healing rate compared to the reconstruction plate group, with no significant differences at other time points. CONCLUSION: Over a nearly 5-year review, mandibular reconstruction with vascularized iliac bone flaps showed that reconstruction plates better maintained condylar position accuracy, while miniplates had superior bone healing rates at 6 months. No significant differences were found in other accuracy indices between the two plates. CLINICAL RELEVANCE: Clinicians' selection of fixation plates frequently depends on personal preference rather than evidence-based criteria. This study compares the precision and postoperative osseous healing outcomes of miniplates and reconstruction plates to provide a more scientifically grounded basis for clinical decision-making.

Comparing the Outcomes of Osteocutaneous Radial Forearm and Fibula Free Flaps in the Reconstruction of Mandibular Osteoradionecrosis.

BACKGROUND: This study compares the outcomes of osteocutaneous radial forearm free flap (OC-RFFF) and fibula free flap (FFF) reconstruction of mandibular osteoradionecrosis (ORN). METHODS: Retrospective review of patients undergoing OC-RFFF/FFF reconstruction for mandible ORN between 2005 and 2020 at a tertiary center. Patient characteristics, postoperative complications, and functional outcomes were evaluated using chi-squared and logistic regression analysis. RESULTS: Fifty-six patients were included (OC-RFFF: 38; FFF: 18). Significantly more OC-RFFF patients had lateral mandible defects (94% vs. 61%, p = 0.0014). There were significantly more patients with exposed intraoral bone in the OC-RFFF group (23% vs. 0% p = 0.02), but no significant differences in hardware complications or flap failure. Donor site partial skin graft loss was more common in the FFF group (22% vs. 2.6%, p = 0.016), but no other significant differences in donor site morbidity were seen. Bivariable analysis showed no impact of flap type, tobacco/alcohol use, diabetes, or hypothyroidism on postoperative complications. Sixty percent of OC-RFFF, and 67% of FFF, patients resumed an oral diet after surgery. Oral diet was not impacted by flap type (OR = 0.769, 95% CI = 0.201-2.706, p = 0.688). CONCLUSION: The OC-RFFF is an acceptable option in the reconstruction of ORN involving the lateral mandible, though there is increased risk of bone exposure. These findings can help guide surgeon selection of microvascular free flap donor sites and appropriate patient counseling.

Application of Submandibular Gland Flap in the Repair of Postoperative Defects in Clinical Stage III Osteoradionecrosis of the Jaw.

OBJECTIVE: Investigating the clinical efficacy of submandibular gland flap repair for postoperative defects in clinical stage III osteoradionecrosis of the jaw was the objective of this study. METHODS: The study included 3 patients who declined vascularized fibula flap repair for mandibular defects and 1 patient who was not fit for mandibular reconstruction due to poor systemic condition. The postoperative defects were successfully repaired using a submandibular gland flap, and the clinical outcomes were monitored. RESULTS: After a 6 to 8 month postoperative follow-up, all patients exhibited good wound healing, no signs of infection, no pain, and normal submandibular gland function. CONCLUSION: The study demonstrated that submandibular gland flap repair is an effective and feasible approach for addressing postoperative defects in clinical stage III osteoradionecrosis of the jaw, yielding satisfactory clinical results.

Prosthodontic rehabilitation with all-on-four implant treatment combined CAD/CAM prosthesis in an oral cancer patient: a case report.

BACKGROUND: The microvascular free fibula (MFF) flap is a reliable treatment modality for mandibular reconstruction and is suitable for dental implant placement after oncologic surgery. The most common issue with the MFF flap is its limited bone height, which typically results in excessive interarch space and complicates prosthodontic therapy. Overcoming the physical limitations from tumor excision and reducing the treatment time for prosthodontic rehabilitation to improve quality of life are critical clinical challenges. CASE PRESENTATION: A 64-year-old male with lower left gum and bilateral buccal cancer received a single-layer microvascular MFF flap to reconstruct a mandibular defect post-tumor excision. He underwent a bilateral modiolus Z-plasty combined with a skin flap debulking procedure to relieve oral contracture, achieving adequate mouth opening for prosthodontic rehabilitation. Scar tissue bands on the bilateral cheeks significantly affected retention and stability, hampering dental impression performance. The patient sought prosthodontic rehabilitation to enhance his chewing function and quality of life promptly. Prosthodontic rehabilitation with all-on-4 implant therapy, utilizing computer-aided design and computer-assisted manufacturing (CAD/CAM), was completed within one month. CONCLUSION: This case utilized the all-on-4 implant system to address the insufficient fibular height for conventional dental implant placements. Dental CAD/CAM was employed to mill custom prosthetic abutments and a large titanium framework for the implant bar overdenture, compensating for the excessive interarch space between the grafted fibula and maxilla. This treatment approach successfully shortened the prosthodontic rehabilitation time and overcame anatomical limitations.

3D-assisted surgery for reconstruction in the head and neck area.

Preoperative virtual surgical planning and the use of 3D-printed patient-specific models and cutting guides are increasingly being used in the reconstruction of mandibular defects with a free bone flap. This technology offers several advantages over conventional surgery, such as reduced operating time, reduced bone flap ischaemia time, and the ability to perform more complex and precise reconstructions. This review presents the evidence supporting 3D-assisted surgery for mandibular defect reconstruction and discusses the utilisation of commercial vendors versus in-house 3D-printing solutions.

Dimensional changes in free gingival grafts at implant sites in the reconstructed mandible: a retrospective study.

OBJECTIVE: To evaluate the dimensional changes in free gingival grafts (FGG) at implant sites in mandibular reconstruction patients. METHODS: Patients who received FGG 4 months after implant placement in the reconstructed mandible with no keratinized mucosa (KM) present were invited for re-examination after 36.7 ± 16.8 months (3.06 ± 1.4 years). Immediately after graft extraction (T0), graft width (GW), graft length (GL), graft thickness (GT), graft dimension (GD), and vertical bone height were documented. Re-examination (T1) included clinical examinations (GW, GL, GD, peri-implant probing depths, and modified Sulcus Bleeding Index), radiographic examination (marginal bone level), and medical chart review. RESULTS: Twenty patients and 62 implants (47 in fibula flaps and 15 in iliac flaps) were included. A significant decrease in GW (51.8%), GL (19.2%), and GD (60.2%), were found between T0 and T1 (p < .001). The univariate analysis showed that GW change was not significantly associated with reconstruction technique, baseline GL, baseline GT, baseline GD, implant location, or type of prosthesis. Implant survival rate of 100% was observed at follow-up. CONCLUSIONS: Within the limitations of the study, free gingival grafts at implant sites in the reconstructed mandible undergo dimensional change that result in a reduction of approximately 60% of the original graft dimension. Graft width decreased over 50%. CLINICAL RELEVANCE: FGG is the standard of care intervention for increasing the amount of KM around implants. This study was the first to evaluate the dimensional change in FGG at implant sites in mandibular reconstruction patients after a medium-term follow-up. CLINICAL TRIAL REGISTRATION: Clinical trial registration is not applicable as this study comprehends a retrospective analysis.

Segmental mandibulectomy and microvascular reconstruction with fibula free flap: Comparison between intraoral and extraoral approaches.

BACKGROUND: Segmental mandibulectomy and reconstruction of resulting defect can be performed via intraoral approach (IOA) or extraoral approach (EOA). Both approaches have advantages, disadvantages, indications, and contraindications to consider during their selection. OBJECTIVE: To compare IOA vs EOA of segmental mandibulectomy and microvascular reconstruction with fibula free flap (FFF). METHODS: We conducted a retrospective cohort study in which 51 patients who underwent segmental mandibulectomy and microvascular reconstruction with FFF from 2020 to 2024 were included, especially 17 patients by IOA and 34 patients by EOA, representing both groups of this study. Clinical characteristics, surgery parameters, and patients' prognosis were evaluated. Patients' satisfaction and Derriford Appearance Scale (DAS59) were assessed during follow-up. RESULTS: Ameloblastoma was the most frequent diagnosis (52.9% managed by IOA vs 70.6% by EOA); FFF was frequently positioned as double barrel (94.1% managed by IOA vs 88.2% by EOA). Compared with EOA group, IOA group had less intraoperative blood loss (mean difference [MD] = -112.2, 95% confidence interval [CI]: -178.9 to -45.5, p = 0.001), higher satisfaction score (MD = 1.3, 95% CI: 0.9 to 1.7, p ˂ 0.001), and lower DAS59 score (MD = -0.5, 95% CI: -0.7 to -0.2, p ˂ 0.001). CONCLUSION: Both IOA and EOA were found safe and feasible, presenting similar perioperative features and postoperative outcomes. Patients managed with IOA were more satisfied with aesthetic outcomes than patients managed with EOA. In the absence of simultaneous immediate implant during mandibular FFF reconstruction, after stability of FFF on the defect site, patients should always be referred to an implantologist and/or prosthodontist for teeth restoration to improve functional and aesthetic outcomes.

A comparison of preoperative soft tissue contour versus bone accuracy as a predictor of quality of life outcomes in osseous free flap jaw reconstruction using occlusal-based virtual surgical planning.

OBJECTIVES: Occlusal-based virtual surgical planning (VSP) prioritises the placement of endosseous dental implants, over replicating native bone contour. This may compromise facial aesthetics. This study aimed to compare function and health-related quality of life (HRQOL) following maxillomandibular reconstruction according to the ability to replicate preoperative soft-tissue contour and virtual plan. MATERIALS AND METHODS: Patients who underwent occlusal based VSP osseous free flap reconstruction of the maxilla or mandible with high-resolution pre- and post-operative facial computerised tomography imaging and completed the FACE-Q questionnaire were retrospectively identified. Accuracy of reconstruction compared to preoperative soft tissue contour and virtual plan, was measured using 3DSlicer® and CloudCompare® in three dimensions. Random effects modelling determined the associations between bony and soft tissue accuracy and HRQOL/functional domains. RESULTS: Twenty-two patients met the inclusion criteria. For mandibular and maxillary reconstructions, better soft tissue accuracy was associated with improved appearance (p = 0.048) and appearance distress (p = 0.034). For mandibular reconstructions, better soft tissue accuracy was associated with improved smile (p = 0.039) and smile distress (p = 0.031). For maxillary reconstructions, better bony accuracy was associated with improved appearance (p = 0.023) and drooling distress (p = 0.001). Unexpectedly, better bony accuracy was associated with worse eating and drinking (p = 0.015), oral competence (p = 0.005) and eating distress (p = 0.013) in mandibular reconstructions. CONCLUSION: Whilst soft tissue accuracy was associated with better functional and HRQOL outcomes, bone accuracy was associated with worse oral function or distress in mandibular reconstruction. These results require validation but should be considered when performing occlusal-based VSP, which prioritises dental rehabilitation over replicating facial bony contour.

Postoperative facial prediction for mandibular defect based on surface mesh deformation.

OBJECTIVES: This study aims to introduce a novel predictive model for the post-operative facial contours of patients with mandibular defect, addressing limitations in current methodologies that fail to preserve geometric features and lack interpretability. METHODS: Utilizing surface mesh theory and deep learning, our model diverges from traditional point cloud approaches by employing surface triangular mesh grids. We extract latent variables using a Mesh Convolutional Restricted Boltzmann Machines (MCRBM) model to generate a three-dimensional deformation field, aiming to enhance geometric information preservation and interpretability. RESULTS: Experimental evaluations of our model demonstrate a prediction accuracy of 91.2 %, which represents a significant improvement over traditional machine learning-based methods. CONCLUSIONS: The proposed model offers a promising new tool for pre-operative planning in oral and maxillofacial surgery. It significantly enhances the accuracy of post-operative facial contour predictions for mandibular defect reconstructions, providing substantial advancements over previous approaches.

Accuracy of the surgical execution of virtually planned deep circumflex iliac artery flaps and their appropriateness for masticatory rehabilitation.

BACKGROUND: Tumorous diseases of the jaw demand effective treatments, often involving continuity resection of the jaw. Reconstruction via microvascular bone flaps, like deep circumflex iliac artery flaps (DCIA), is standard. Computer aided planning (CAD) enhances accuracy in reconstruction using patient-specific CT images to create three-dimensional (3D) models. Data on the accuracy of CAD-planned DCIA flaps is scarce. Moreover, the data on accuracy should be combined with data on the exact positioning of the implants for well-fitting dental prosthetics. This study focuses on CAD-planned DCIA flaps accuracy and proper positioning for prosthetic rehabilitation. METHODS: Patients post-mandible resection with CAD-planned DCIA flap reconstruction were evaluated. Postoperative radiograph-derived 3D models were aligned with 3D models from the CAD plans for osteotomy position, angle, and flap volume comparison. To evaluate the DCIA flap's suitability for prosthetic dental rehabilitation, a plane was created in the support zone and crestal in the middle of the DCIA flap. The lower jaw was rotated to close the mouth and the distance between the two planes was measured. RESULTS: 20 patients (12 males, 8 females) were included. Mean defect size was 73.28 ± 4.87 mm; 11 L defects, 9 LC defects. Planned vs. actual DCIA transplant volume difference was 3.814 ± 3.856 cm³ (p = 0.2223). The deviation from the planned angle was significantly larger at the dorsal osteotomy than at the ventral (p = 0.035). Linear differences between the planned DCIA transplant and the actual DCIA transplant were 1.294 ± 1.197 mm for the ventral osteotomy and 2.680 ± 3.449 mm for the dorsal (p = 0.1078). The difference between the dental axis and the middle of the DCIA transplant ranged from 0.2 mm to 14.8 mm. The mean lateral difference was 2.695 ± 3.667 mm in the region of the first premolar. CONCLUSION: The CAD-planned DCIA flap is a solution for reconstructing the mandible. CAD planning results in an accurate reconstruction enabling dental implant placement and dental prosthetics.

Double-Flap Elevation From the Ipsilateral Lower Extremity: The Anterior Approach to Fibula Osteo-Cutaneous Flap Elevation.

ABSTRACT: The free fibular flap has been elevated by a "lateral approach" from the posterior edge of the peroneal muscle for more than 40 years. However, in this approach, the surgical view is limited because flap elevation in mandibular reconstruction is performed simultaneously with tumor resection in the supine position, even when using positioning pillows. We herein propose an "anterior approach" as a new surgical method. We retrospectively investigated free fibular flap surgeries performed using the anterior approach, which consists of three anterior approaches, over a seven-year period. First, to avoid the course of the superficial peroneal nerve, the crural fascia was incised 1-2 cm posterior to the anterior edge of the peroneal muscle. The anterior edge of the peroneus muscle is detached from the anterior intermuscular septum. After performing osteotomies distal and proximal to the fibula, the interosseous membrane was incised from the anterior view. Pulling out the fibula to the anterior space between the anterior intermuscular septum and the peroneal muscle made the surgical field shallow. No postoperative superficial or deep peroneal nerve palsies were found in the 55 patients. Only one tourniquet was used in 31 of the 55 cases (56.4%), with an average of 95 min. Twenty-four patients (43.6%) required a second tourniquet 38 min after an interval. Only one tourniquet was used in 25 of the 30 (83.3%) cases in the last 3 years. Moreover, double flaps were used in 21 cases (38.2%), all of which involved ipsilateral ALT flaps. In 18 cases, double-flap elevation and prefabrication were successfully finished before the completion of tumor resection by otorhinolaryngologists.

[The use of «growing¼ endoprostheses in the complex treatment of children with post-resection mandibular defects]. / Primenenie «rastushchikh¼ endoprotezov v kompleksnom lechenii detei s postrezektsionnymi defektami nizhnei chelyusti.

THE AIM OF THE STUDY: To develop and implement a comprehensive algorithm for the rehabilitation of patients after partial resection of the mandible using a titanium «growing¼ endoprosthesis. MATERIAL AND METHODS: The study included 16 patients aged 2 to 7 years, with benign (6 cases) and malignant (10 cases) tumors of the mandible. The patients were divided into 2 groups depending on the time of fixation of the endoprosthesis. Group 1 included patients with simultaneous installation of a prosthesis (7 people). Group 2 included patients with delayed installation of an endoprosthesis (9 people). For the reconstruction of the mandible, «growing¼ titanium endoprostheses made of Ti6Al4V alloy of various designs were used. Removable orthodontic devices of mechanical and functional type of action, standard elastic mouthguards were used in the process of dental treatment. RESULTS: A comprehensive algorithm has been developed for the rehabilitation of children after partial resection of the mandible, depending on the time of fixation of the prosthesis and the volume of surgical intervention. CONCLUSION: The developed algorithm of complex rehabilitation using a «growing¼ endoprosthesis and dental support at the pre and postoperative stages allows to reduce the volume of secondary deformation of facial structures and dentition.

Accuracy and clinical outcomes of mandibular reconstruction with a virtually planned deep circumflex iliac artery flap with stock temporomandibular joint prosthesis.

The repair of hemimandibulectomy defects involving the temporomandibular joint (TMJ) is challenging. This study compared the functional outcomes and reconstruction accuracy using a deep circumflex iliac artery (DCIA) flap with and without a virtually planned stock TMJ prosthesis (TMJP) after hemimandibulectomy. Ten patients were assessed: five with a TMJP (TMJP group) and five without (control group). A three-dimensional comparison revealed a mean deviation of 0.11 ± 0.04 mm between the planned and actual DCIA flap with TMJP. The planned and actual TMJP positions differed by 0.56 ± 0.57 mm in height, 0.33 ± 0.24 mm ventrally/dorsally, and 1.18 ± 0.42 mm medially/laterally. Mouth opening, laterotrusion, and midline deviation were significantly greater in the control group than in the TMJP group (P = 0.024, P = 0.008, P = 0.024). The deviation in ventral to dorsal translation for the DCIA flap was slightly higher than reported values in the literature, while height deviation was comparable. Lower deviations in the literature were due to the DCIA flap being used where both TMJs were intact. The in-house virtually planned DCIA flap with stock TMJP yielded results comparable to more expensive patient-specific prostheses.

One-stage prosthodontically driven jaw reconstruction in patients with benign and malignant pathologies: A 7- to 11-year cohort study.

OBJECTIVES: One stage functional jaw reconstruction is defined as the resection and reconstruction of segmental defects in conjunction with the placement of dental implants in an ideal prosthetic position and loaded with a provisional restoration, during one surgical procedure. The aim of the study is to describe clinical outcomes of patients who underwent one stage functional jaw reconstruction. METHODS: Patients who underwent one-stage functional jaw reconstruction, from January 2013 to March 2016 were recalled in 2022 and 2023. Planning and execution for the reconstruction utilized either analogue or digital techniques. Outcome parameters recorded were treatment-related outcomes at patient level, implant-related outcomes and patient-reported outcome measures. RESULTS: Eighteen patients underwent one-stage jaw reconstruction with a total of 57 implants. Four patients had maxillary and 14 had mandibular reconstructions. Ten patients underwent postoperative radiotherapy. Ten patients were planned using analogue and eight by digital planning. Three patients had partial flap necrosis, three patients had plate fractures, implant loss was seen in one patient and four patients died during the period. A functional prosthesis was provided in 16 out of the 18 patients. CONCLUSION: One-stage functional jaw reconstruction is a predictable method for providing rehabilitation with successful outcomes at 7-11 years. However, caution should be exercised when the treatment modality is carried out in patients with malignant pathologies who have undergone radiotherapy.

Design and evaluation of mechanical strength of multi-material polymeric implants for mandibular reconstruction.

Reconstruction of mandible implants to address segmental abnormalities is still a challenging task, both in vitro and in vivo. The mechanical strength of the materials used is a critical factor that determines how well bone is regenerated. The reconstruction technique of mandibular abnormalities widely uses polymeric implants. It is critical to evaluate the mechanical resilience under different load cases, including axial, combined, and flexural loading conditions. This study developed implants for mandibular defects using a combination of four materials: polylactic acid (PLA), polyethylene terephthalate glycol (PETG), thermoplastic polyurethane (TPU), and polycaprolactone (PCL), with the aim of mimicking the inherent characteristics of cortical and cancellous bone structures and evaluating their mechanical properties to support bone Osseo integration. The eleven of these combinations of structures result below the micro strain threshold level of <3000 µÎµ, and the five combinations of the structures result in micro strain above the threshold value. The intact bone study results show that the stress under axial, combined, and flexural loading conditions is 27.6, 38.9, and 64.9 MPa, respectively. This study's stress results are lower than those from the intact bone study. The study found that the combinations of PLA and TPU material were most preferred for the cortical and cancellous bone regions of polymeric implants. These materials are also compatible with 3D printing. The results of this study can be used to find multi-material combinations that are strong and flexible.

Soft tissue movements after mandibular reconstruction using the vascularized iliac flap: patterns and predictions.

OBJECTIVES: To investigate soft-to-hard tissue response following mandibular reconstruction and to develop a predictive model for projecting soft tissue movement. MATERIALS AND METHODS: In this retrospective study, 18 patients receiving mandibular reconstruction using a vascularized iliac flap were enrolled. Various indicators for characterizing the movement of tissues were considered to identify the effective predictors for projecting soft tissue movements. Face-region-specific linear regression models for prediction were constructed and evaluated. RESULTS: The arithmetic mean of hard tissue movement in an extended area had the strongest correlation with the movement of the focal soft tissue, while the arithmetic mean in a regional area (Ram) was a more effective predictor. The linear regression model using Ram, global extrema and distances between them as the predictors performed the best in the lower margin of the face, with an average error of 1.51 ± 1.38 mm. Soft tissue movement in the alveolar process was not correlated with the existence of dentition, only can be predicted by the soft tissue movement below it. The area of the masseter was strongly correlation with Ram, but no other factors. CONCLUSIONS: An accurate prediction of soft tissue movements in the lower margin and the alveolar process of the face can be achieved by considering hard tissue and adjacent soft tissue movements. No effective predictor in the masseter area was identified. CLINICAL RELEVANCE: We investigated the relationship between hard tissue movements and the soft tissue responses in the facial area. Through building predictive models for projecting postoperative soft tissue movements, we derive insights for the aesthetic outcome of face surgeries. CLINICAL TRIAL REGISTRATION: This study was registered on the Chinese Clinical Trial Registry (registration number: ChiCTR2100054103).

Aggressive Late Recurrence of a Calcifying Epithelial Odontogenic Tumor: Surgical Refinements Based on New Technologies.

A calcifying epithelial odontogenic tumor is a rare, benign odontogenic neoplasm. Surgical treatment is the option, and late recurrence is very rare. Radiologically, the lesions are commonly present scattered calcifications. This case report details a 64-year-old female patient with a recurrence of a right mandibular calcifying epithelial odontogenic tumor 2 decades after successful initial surgical removal. A segmental mandibulectomy and immediate reconstruction were performed using a planned vascularized free fibula flap with virtual surgery, custom reconstruction plate, and intraoperative computed tomography. Modifications were made to the design of the reconstruction plate to improve the cervicofacial profile and subsequent rehabilitation with dental implants. Fully guided implant surgery with point-of-care manufacturing protocol was done to improve prosthetically driven implant planning. The case presented highlights the usefulness of new technologies for mandibular reconstruction with the free fibula flap and the concept of point-of-care with technical notes that increase precision and reduce morbidity in implant-supported rehabilitation.

Are Cellular Bone Matrix Allografts a Viable Option for Mandibular Tissue Engineering and Reconstruction?

BACKGROUND: Traditional mandibular reconstruction has relied on the use of vascularized and non-vascularized autografts. The use of allografts and tissue engineering modalities has risen as an alternative. PURPOSE: The purpose of this study was to determine the success of a cellular bone matrix (CBM) allograft composed of lineage committed bone forming cells for mandibular tissue engineering and reconstruction. STUDY DESIGN, SETTING, SAMPLE: A retrospective cohort study was implemented using data from subjects treated with a CBM at the University of Louisville from 2019 to 2023. Subjects were excluded if they were not treated with a CBM, data were not complete, or postoperative follow-up time was less than 3 months. PREDICTOR VARIABLES: The predictor variables were composed of heterogenous variables grouped into the following categories: demographics (age, sex), medical history (history of penicillin [PCN] allergy, history of diabetes mellitus [DM] and tobacco use), etiology (benign tumor, ballistic trauma, nonballistic trauma, odontogenic cyst, osteomyelitis/ medication-related osteonecrosis of the jaw), mandibular resection length (cm) and type (marginal, segmental), delayed versus immediate reconstruction, and whether an autograft (proximal tibia) with platelet-rich fibrin was used in combination with the CBM. MAIN OUTCOME VARIABLE: The primary outcome variable was graft success (yes or no). Success was defined as bony union and defect fill (demonstrated on panoramic radiograph) and mandibular stability (based on postoperative clinical examination at 3 months). COVARIATES: Not applicable. ANALYSES: Descriptive statistics were calculated for each variable. To measure the associations between the risk factors and graft success, Fisher's exact test for categorical variables and the Wilcoxon rank sum test for numeric data were used. A P value of <.05 was considered significant. RESULTS: The sample included 38 subjects. The median age of all subjects was 46 (interquartile range 32.6) years. Overall, 28 (73.7%) cases were successful. Subjects with a reported PCN allergy or a history of DM had significantly lower success (2, 7.1% with PCN allergy or DM) compared to those who did not (P = .008, PCN allergy; P = .03, DM). CONCLUSIONS AND RELEVANCE: This is the largest case series of CBM based mandibular reconstruction relative to the available maxillofacial surgery literature. The clinician should consider confirmation of PCN allergy so PCN-type antibiotics can be used. CBMs may be an alternative to autografts.