Facile synthesis of tantalum decorated on iron selenide with nitrogen-doped graphene hybrid for the sensitive detection of trolox in berries: Density functional theory interpretation.

This work presents a hydrothermal method followed by a sonochemical treatment for synthesizing tantalum decorated on iron selenide (Ta/FeSe2) integrated with nitrogen-doped graphene (NGR) as a susceptible electrode material for detecting trolox (TRX) in berries samples. The surface morphology, structural characterizations, and electrochemical performances of the synthesized Ta/FeSe2/NGR composite were analyzed via spectrophotometric and voltammetry techniques. The GCE modified with Ta/FeSe2/NGR demonstrated an impressive linear range of 0.1 to 580.3 µM for TRX detection. Additionally, it achieved a remarkable limit of detection (LOD) of 0.059 µM, and it shows a high sensitivity of 2.266 µA µÐœ-1 cm-2. Here, we used density functional theory (DFT) to investigate the structures of TRX and TRX quinone and the locations of energy levels and electron transfer sites. The developed sensor exhibits significant selectivity, satisfactory cyclic and storage stability, and notable reproducibility. Moreover, the practicality of TRX was assessed in different types of berries, yielding satisfactory recoveries.

Ti/Ta-based composite polysaccharide scaffolds for guided bone regeneration in total hip arthroplasty.

Guided bone regeneration can play an important role in orthopedic applications. This work presents the synthesis and characterization of composite scaffolds based on polysaccharides loaded with microparticles of titanium or tantalum as novel materials proposed for composite systems with promising characteristics for guided bone regeneration. Ti/Ta composite scaffolds were synthesized using chitosan and gellan gum as organic substrates and crosslinked with oxidized dextran resulting in stable inorganic-organic composites. Physico-chemical characterization revealed a uniform distribution of metal nanoparticles within the scaffolds that showed a release of metals lower than 5 %. In vitro biological assays demonstrated that Ta composites exhibit a 2 times higher ALP activity than Ti and a higher capacity to support the full differentiation of human mesenchymal stem cells into osteoblasts. These results highlight their potential for bone regeneration applications.

Activating Angiogenesis and Immunoregulation to Propel Bone Regeneration via Deferoxamine-Laden Mg-Mediated Tantalum Oxide Nanoplatform.

Vascularization and inflammation management are essential for successful bone regeneration during the healing process of large bone defects assisted by artificial implants/fillers. Therefore, this study is devoted to the optimization of the osteogenic microenvironment for accelerated bone healing through rapid neovascularization and appropriate inflammation inhibition that were achieved by applying a tantalum oxide (TaO)-based nanoplatform carrying functional substances at the bone defect. Specifically, TaO mesoporous nanospheres were first constructed and then modified by functionalized metal ions (Mg2+) with the following deferoxamine (DFO) loading to obtain the final product simplified as DFO-Mg-TaO. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the product was homogeneously dispersed hollow nanospheres with large specific surface areas and mesoporous shells suitable for loading Mg2+ and DFO. The biological assessments indicated that DFO-Mg-TaO could enhance the adhesion, proliferation, and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The DFO released from DFO-Mg-TaO promoted angiogenetic activity by upregulating the expressions of hypoxia-inducible factor-1 (HIF-1α) and vascular endothelial growth factor (VEGF). Notably, DFO-Mg-TaO also displayed anti-inflammatory activity by reducing the expressions of pro-inflammatory factors, benefiting from the release of bioactive Mg2+. In vivo experiments demonstrated that DFO-Mg-TaO integrated with vascular regenerative, anti-inflammatory, and osteogenic activities significantly accelerated the reconstruction of bone defects. Our findings suggest that the optimized DFO-Mg-TaO nanospheres are promising as multifunctional fillers to speed up the bone healing process.

Tantalum Particles Promote M2 Macrophage Polarization and Regulate Local Bone Metabolism via Macrophage-Derived Exosomes Influencing the Fates of BMSCs.

In this study, the regulatory role and mechanisms of tantalum (Ta) particles in the bone tissue microenvironment are explored. Ta particle deposition occurs in both clinical samples and animal tissues following porous Ta implantation. Unlike titanium (Ti) particles promoting M1 macrophage (Mϕ) polarization, Ta particles regulating calcium signaling pathways and promoting M2 Mϕ polarization. Ta-induced M2 Mϕ enhances bone marrow-derived mesenchymal stem cells (BMSCs) proliferation, migration, and osteogenic differentiation through exosomes (Exo) by upregulating miR-378a-3p/miR-221-5p and downregulating miR-155-5p/miR-212-5p. Ta particles suppress the pro-inflammatory and bone resorption effects of Ti particles in vivo and in vitro. In a rat femoral condyle bone defect model, artificial bone loaded with Ta particles promotes endogenous Mϕ polarization toward M2 differentiation at the defect site, accelerating bone repair. In conclusion, Ta particles modulate Mϕ polarization toward M2 and influence BMSCs osteogenic capacity through Exo secreted by M2 Mϕ, providing insights for potential bone repair applications.

3D-Printed Porous Tantalum Scaffold Improves Muscle Attachment via Integrin-ß1-Activated AKT/MAPK Signaling Pathway.

3D-printed porous titanium (Ti) alloy scaffolds have been reported for facilitating muscle attachment in our previous study. However, the anti-avulsion ability needs to be improved. In this study, we used 3D-printed porous tantalum (Ta) scaffolds to improve muscle attachment. The differences in chemical and physical characteristics and muscle adhesion between the two scaffolds were tested and compared in the gene and protein level both in vitro and in vivo. The possible molecular mechanism was analyzed and further proved. The results showed that compared with the porous Ti alloy, porous Ta had better cell proliferation, differentiation, migration, and adhesion via the integrin-ß1 (Itgb1)-activated AKT/MAPK signaling pathway in L6 rat myoblasts. When artificially down-regulated the expression of Itgb1, cell adhesion and myogenesis differentiation were affected and the phosphorylation of the AKT/MAPK signaling pathway was suppressed. In rat intramuscular implantation, porous Ta had a significantly higher muscle ingrowth rate (85.63% ± 4.97 vs 65.98% ± 4.52, p < 0.01) and larger avulsion force (0.972 vs 0.823 N/mm2, p < 0.05) than the porous Ti alloy. These findings demonstrate that the 3D-printed porous Ta scaffold is beneficial for further clinical application of muscle attachment.

Combined Modification of Fiber Materials by Enzymes and Metal Nanoparticles for Chemical and Biological Protection.

To obtain fiber materials with pronounced chemical-biological protection, metal (Zn or Ta) nanoparticles were jointly applied with polyelectrolyte complexes of enzymes and polypeptides being their stabilizers. Computer modeling revealed the preferences between certain polyelectrolyte partners for N-acyl-homoserine lactone acylase and hexahistidine-tagged organophosphorus hydrolase (His6-OPH) possessing the quorum quenching (QQ) behavior with bacterial cells. The combinations of metal nanoparticles and enzymes appeared to function better as compared to the combinations of the same QQ-enzymes with antibiotics (polymyxins), making it possible to decrease the applied quantities by orders of magnitude while giving the same effect. The elimination of Gram-positive and Gram-negative bacterial cells from doubly modified fiber materials notably increased (up to 2.9-fold), whereas His6-OPH retained its hydrolytic activity in reaction with organophosphorus compounds (up to 74% of initially applied activity). Materials with the certain enzyme and Zn nanoparticles were more efficient against Bacillus subtilis cells (up to 2.1-fold), and Ta nanoparticles acted preferentially against Escherichia coli (up to 1.5-fold). Some materials were proved to be more suitable for combined modification by metal nanoparticles and His6-OPH complexes as antimicrobial protectants.

Tantalum oxide nanoparticles as an advanced platform for cancer diagnostics: a review and perspective.

The development of new safe and effective contrast agents (CAs) is a crucial factor to increase the effectiveness of computed tomography (CT). For now, tantalum oxide-based nanoparticles (TaOx NPs) are among the most promising CAs for CT due to their superior properties: high X-ray attenuation coefficient, excellent biocompatibility, and easily modifiable surface chemistry. Compared to the commercially available analogs (iodine-based CAs), TaOx NPs provide better contrast performance, long-circulation, and high safety profiles (reduced exposure of X-rays and CA dosage). Among the investigated nanoparticulate CAs they afford higher cost-effectiveness (Au, Pt, Lu). TaOx NPs can also be easily modified to include other imaging or therapeutic modalities. This review aims to summarize the current state-of-the-art knowledge in the field of tantalum oxide-based CAs used for single or multimodal imaging and theranostic purposes. The design specification of TaOx NPs in terms of size, surface functionalization, composition, and their influence on the contrast performance, toxicity, and pharmacokinetics are discussed. Finally, the future opportunities and challenges of TaOx NPs used as CT CAs are addressed.

Bone screws of porous silicon carbide coated with tantalum improve osseointegration and osteogenesis in goat femoral neck fractures.

Traditional metal materials, such as stainless steel and titanium (Ti) alloys, are still the gold standards for fracture fixation. However, the elastic moduli of these materials differ from that of human cortical bone, and the stress shielding effect affects fracture healing, leading to secondary fractures. Herein, a new porous Ta coated SiC (pTa-SiC) scaffold using in internal fixation devices with good mechanical and biological properties was prepared based on porous silicon carbide (SiC) scaffold and tantalum (Ta) metal. The osteogenic and osseointegration properties of the pTa-SiC scaffold were investigated by bothin vitroandin vivotests. The results showed that compared with porous titanium (pTi), the pTa-SiC promoted the proliferation, migration, and osteogenic differentiation of human bone marrow-derived mesenchymal stem cells. Moreover, the internal fixation tests were carried out in a goat load-bearing femoral neck fracture model. Histological results showed good osseointegration around the pTa-SiC screws. And the acid etching results showed that bone cells grew tightly on the pTa-SiC throughout bone canaliculi, and the growth mode was contact osteogenesis, which indicated good biological fixation effects. Therefore, it is reasonable to be expected that the new pTa-SiC scaffold with excellent mechanical and biological properties could be a promising candidate for bone implant field.

Tin, Titanium, Tantalum, Vanadium and Niobium Oxide Based Sensors to Detect Colorectal Cancer Exhalations in Blood Samples.

User-friendly, low-cost equipment for preventive screening of severe or deadly pathologies are one of the most sought devices by the National Health Services, as they allow early disease detection and treatment, often avoiding its degeneration. In recent years more and more research groups are developing devices aimed at these goals employing gas sensors. Here, nanostructured chemoresistive metal oxide (MOX) sensors were employed in a patented prototype aimed to detect volatile organic compounds (VOCs), exhaled by blood samples collected from patients affected by colorectal cancer and from healthy subjects as a control. Four sensors, carefully selected after many years of laboratory tests on biological samples (cultured cells, human stools, human biopsies, etc.), were based here on various percentages of tin, tungsten, titanium, niobium, tantalum and vanadium oxides. Sensor voltage responses were statistically analyzed also with the receiver operating characteristic (ROC) curves, that allowed the identification of the cut-off discriminating between healthy and tumor affected subjects for each sensor, leading to an estimate of sensitivity and specificity parameters. ROC analysis demonstrated that sensors employing tin and titanium oxides decorated with gold nanoparticles gave sensitivities up to 80% yet with a specificity of 70%.

Integration of TaOx with Bi2S3 for Targeted Multimodality Breast Cancer Theranostics.

Early identification and treatment of breast cancer is very important for breast conserving therapy and to improve the prognosis and survival rates of patients. Multifunctional nanotheranostic agents are of particular importance in the field of precise nanomedicine, since they can augment the visualization and treatment of cancer. We developed a novel Bi2S3 nanoparticle coated with a hyaluronic acid (HA)-modified tantalum oxide (TaOx) nanoshell (Bi2S3@TaOx-HA). The as-prepared core/shell nanoparticles exhibited a high Bi2S3 nanoparticle loading efficiency of (67 wt %). The TaOx nanoshell exhibited excellent biocompatibility and computed tomography imaging capacity, and the Bi2S3 nanoparticles exhibited an excellent photothermal transducing performance and computed tomography (CT) and photoacoustic imaging capacity. As a result of these merits, the Bi2S3@TaOx core-shell nanoparticles can act as a theranostic agent for CT/photoacoustically monitored enhanced photothermal therapy. These findings will evoke new interest in future cancer therapeutic strategies based on biocompatible functional nanomaterials.

Tantalum oxide nanoparticles as versatile contrast agents for X-ray computed tomography.

Here, we describe the synthesis, characterization and in vitro and in vivo performance of a series of tantalum oxide (TaOx) based nanoparticles (NPs) for computed tomography (CT). Five distinct versions of 9-12 nm diameter silane coated TaOx nanocrystals (NCs) were fabricated by a sol-gel method with varying degrees of hydrophilicity and with or without fluorescence, with the highest reported Ta content to date (78%). Highly hydrophilic NCs were left bare and were evaluated in vivo in mice for micro-CT of full body vasculature, where following intravenous injection, TaOx NCs demonstrate high vascular CT contrast, circulation in blood for ∼3 h, and eventual accumulation in RES organs; and following injection locally in the mammary gland, where the full ductal tree structure can be clearly delineated. Partially hydrophilic NCs were encapsulated within mesoporous silica nanoparticles (MSNPs; TaOx@MSNPs) and hydrophobic NCs were encapsulated within poly(lactic-co-glycolic acid) (PLGA; TaOx@PLGA) NPs, serving as potential CT-imagable drug delivery vehicles. Bolus intramuscular injections of TaOx@PLGA NPs and TaOx@MSNPs to mimic the accumulation of NPs at a tumor site produce high signal enhancement in mice. In vitro studies on bare NCs and formulated NPs demonstrate high cytocompatibility and low dissolution of TaOx. This work solidifies that TaOx-based NPs are versatile contrast agents for CT.

Hollow Mesoporous Tantalum Oxide Based Nanospheres for Triple Sensitization of Radiotherapy.

Radiotherapy (RT) is one of the most widely used cancer treatments in the clinical setting, while hypoxia-associated resistance often occurs. Herein, a PEGylated TaOx-based oxygen-carrying nanoplatform was constructed for triple sensitizing tumor radiotherapy. The high-Z element based hollow mesoporous TaOx nanospheres were prepared following the in situ growth of ultrasmall CuS nanocrystals and then packaged with O2-saturated perfluoropentane (PFP). NIR laser-triggered mild hyperthermia would lead to the increase of intratumoral blood flow, together with the release of O2, the radiotherapeutic efficiency would be enhanced. Alternatively, radiant energy would be deposited inside the tumor by the Ta element, therefore triple sensitization of radiotherapy could be achieved. The in vivo studies showed that the as-prepared nanospheres could achieve almost total inhibition of tumor growth without obvious side effects, which provides new possibilities for multisensitizing tumor radiotherapy.

Influences of sodium tantalite submicro-particles in polyetheretherketone based composites on behaviors of rBMSCs/HGE-1 cells for dental application.

Dental implanted materials require excellent mechanical properties, biocompatibility as well as integration with bone tissue and gingival tissue to achieve early loading and long-term stability. In this study, cubic shape sodium tantalite (ST) submicro-particles with the size of around 180 nm were synthesized by a hydrothermal method, and ST/polyetheretherketone (PEEK) composites (TPC) with ST content of 20 w% (TPC20) and 40 w% (TPC40) were prepared by melting blend. The results showed that the compressive strength, thermal properties, surface roughness, hydrophilicity and surface energy as well as adsorption of proteins on TPC40 were also significantly enhanced compared with TPC20 and PEEK. Moreover, the responses (adhesion and proliferation as well as differentiation) of rat bone marrow mesenchymal stem cells (rBMSCs), and responses (adhesion, and proliferation) of human gingival epithelial (HGE-1) cells to TPC40 were significantly promoted compared with TPC20 and PEEK. The results demonstrated that ST content in TPC had remarkable effects on the surface properties, which played key roles in stimulating the responses of both rBMSCs and HGE-1 cells. TPC40 with increased surface properties and excellent cytocompatibility might have great potential as an implanted material for dental application.

Mechanical, antibacterial, and biocompatibility mechanism of PVD grown silver-tantalum-oxide-based nanostructured thin film on stainless steel 316L for surgical applications.

Surgical site infection associated with surgical instruments has always been a factor in delaying post-operative recovery of patients. The evolution in surface modification of surgical instruments can be a potential choice to overcome the nosocomial infection mainly caused by bacterial populations such as Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. A study was, therefore, conducted characterising the morphology, hydrophobicity, adhesion strength, phase, Nano-hardness, surface chemistry, antimicrobial and biocompatibility of SS 316L steel deposited with a Nano-composite layer of Silver (Ag) and Tantalum oxide (Ta2O5) using physical vapour deposition magnetron sputtering. The adhesion strength of Ag/AgTa2O5 coating on SS 316L and treated at 250-850 °C of thermal treatment was evaluated using micro-scratch. The Ag/Ag-Ta2O5-400 °C was shown a 154% improvement in adhesion strength on SS 316L when compared with as-sputtered layer or Ag/Ag-Ta2O5-250, 550, 700 and 850 °C. The FESEM, XPS, and XRD indicated the segregation of Ag on the surface of SS 316L after the crystallization. Wettability and Nano-indentation tests demonstrated an increase in hydrophobicity (77.3 ±â€¯0.3°) and Nano-hardness (1.12 ±â€¯0.43 GPa) when compared with as-sputtered layer, after the 400 °C of thermal treatment. The antibacterial performance on Ag/Ag-Ta2O5-400 °C indicated a significant zone of inhibition to Staphylococcus aureus (A-axis: 16.33 ±â€¯0.58 mm; B-axis: 25.67 ±â€¯0.58 mm, p < 0.01) and Escherichia coli (A-axis: 16.33 ±â€¯1.15 mm; B-axis: 26.00 ±â€¯0.00 mm, p < 0.01) when compared with SS 316L or Ag/Ag-Ta2O5-700 °C, which showed no inhibition. The biocompatibility tests on Ag/Ag-Ta2O5-400 °C demonstrated an excellent in cell attachment, F-actin protein expression and proliferation/viability of bone marrow derived mesenchymal stromal on day 14 when compared with uncoated or Ag/Ag-Ta2O5-700 °C. This study shows that the Ag segregation process, hydrophobicity, adhesion strength, crystallization, and hardness progressively improved after the annealing up to 400 °C.

Ta-Coated Titanium Surface With Superior Bacteriostasis And Osseointegration.

BACKGROUND: Although tantalum (Ta)-based coatings have been proven to have good antibacterial activity, the underlying mechanism and in vivo biological performance remain unclear, which are essential for the clinical application of Ta-coated biomaterials as dental implants. PURPOSE: The main objective of this study is to investigate the antibacterial activity of Ta-modified titanium (Ti) implants against peri-implantitis-related microbes and the potential molecular mechanisms. METHODS: Fusobacterium nucleatum and Porphyromonas gingivalis were selected to evaluate the antibacterial activity and potential antibacterial mechanism of Ta modification. The in vivo biocompatibility of Ta-modified implants was also evaluated. RESULTS: The results showed that Ta-modified surface performed excellent antimicrobial activity against Fusobacterium nucleatum and Porphyromonas gingivalis. Micro galvanic might be formed between the incorporated Ta and the Ti base, which could consume the protons and result in decreased ATP synthesis and increased ROS generation. The gene expression of bacterial virulence factors associated with cellular attachment, invasion and viability as the target of ROS was downregulated. Importantly, in vivo biological studies showed that Ta modification significantly promoted the osseointegration of implants by stimulating the expression of bone-forming proteins. CONCLUSION: This study may provide some insights into clinical applications of Ta-coated Ti implants, especially in possibly infected situations.

Tantalum-incorporated hydroxyapatite coating on titanium implants: its mechanical and in vitro osteogenic properties.

OBJECTIVE: The fabrication of bioactive coatings on metallic implants to enhance osseointegration has become a topic of general interest in orthopedics and dentistry. Hydroxyapatite (HA) coating has been shown to induce bone formation and promote bone-implant integration. Unfortunately, poor mechanical performance has hindered this from becoming a favorable coating material. The majority of present studies have focused in incorporating different elements into HA coatings to improve mechanical properties. In recent years, tantalum (Ta) has received increasing attention due to its excellent biocompatibility and corrosion resistance. The aim of on the present study was to investigate the fabrication and biological performance of Ta-incorporated HA coatings. METHODS: Ta-incorporated HA coatings were fabricated using the plasma spray technique on a titanium substrate, and the surface characteristics and mechanical properties were examined. In addition, the effects of Ta-incorporated HA coatings on the biological behavior of mesenchymal stem cells (BMSCs) were investigated. RESULTS: Ta-incorporated HA coatings with microporous structure had higher roughness and wettability. In addition, the bonding strength of Ta/HA coatings with the substrate was substantially superior to HA coatings. Furthermore, Ta-incorporated HA coatings not only facilitated initial cell adhesion and faster proliferation, but also promoted the osteogenic differentiation of BMSCs. CONCLUSION: These results indicate that the incorporation of Ta could improve mechanical performance and increase the osteogenic activity of HA coatings. The Ta-incorporated HA coating fabricated by plasma spraying is expected to be a promising bio-coating material for metallic implants.

Vascular bundle transplantation combined with porous bone substituted scaffold for the treatment of early-stage avascular necrosis of femoral head.

Various reasons leading to disruption of blood supply will result in avascular femoral head necrosis. Decompression of lesion area, structural support to subchondral bone, and rebuilding of blood supply system are the keys for a successful hip preserve surgery. Reconstruction of local vascular network is always a huge challenge in clinical. Based on tantalum rod implantation and free vascularized fibular grafting, we propose the combined application of vascular bundle transplantation and porous bone substitute scaffold implantation as a potential novel treatment method. It may simultaneously achieve decompression, support and blood supply reconstruction. The hypothesis provides some new ideals and possibilities for solving this clinical problem of femoral head necrosis.

PEGylated Tantalum Nanoparticles: A Metallic Photoacoustic Contrast Agent for Multiwavelength Imaging of Tumors.

Elemental tantalum is a well-known biomedical metal in clinics due to its extremely high biocompatibility, which is superior to that of other biomedical metallic materials. Hence, it is of significance to expand the scope of biomedical applications of tantalum. Herein, it is reported that tantalum nanoparticles (Ta NPs), upon surface modification with polyethylene glycol (PEG) molecules via a silane-coupling approach, are employed as a metallic photoacoustic (PA) contrast agent for multiwavelength imaging of tumors. By virtue of the broad optical absorbance from the visible to near-infrared region and high photothermal conversion efficiency (27.9%), PEGylated Ta NPs depict high multiwavelength contrast capability for enhancing PA imaging to satisfy the various demands (penetration depth, background noise, etc.) of clinical diagnosis as needed. Particularly, the PA intensity of the tumor region postinjection is greatly increased by 4.87, 7.47, and 6.87-fold than that of preinjection under 680, 808, and 970 nm laser irradiation, respectively. In addition, Ta NPs with negligible cytotoxicity are capable of eliminating undesirable reactive oxygen species, ensuring the safety for biomedical applications. This work introduces a silane-coupling strategy for the surface engineering of Ta NPs, and highlights the potential of Ta NPs as a biocompatible metallic contrast agent for multiwavelength photoacoustic image.

Antimicrobial PHAs coatings for solid and porous tantalum implants.

Biomaterial-associated infections (BAI) are the major cause of failure of indwelling medical devices. The risk of BAI can end dramatically in the surgical removal of the affected device. Therefore, a major effort must be undertaken to guarantee the permanence of the implant. In this regard, we have developed antimicrobial coatings for tantalum (Ta) implants, using polyhydroxyalkanoates (PHAs) as matrices for carrying an active principle. The dip-coating technique was successfully used for covering solid Ta discs. An original PHA emulsion flow process was developed for the coating of porous Ta structures, specially for the inner surfaces. The complete characterization of the biopolymer coatings, their antibacterial properties, toxicity and biointegration were analyzed. Thus, non-toxic, well-biointegrated homogeneous biopolymer coatings were attained, which showed antibacterial properties. By using biodegradable PHAs, the resulting drug delivery system assured the protection of Ta against bacterial infections for a period of time.

Substrate-Directed Lewis-Acid Catalysis for Peptide Synthesis.

A Lewis-acid-catalyzed method for the substrate-directed formation of peptide bonds has been developed, and this powerful approach is utilized for the new "remote" activation of carboxyl groups under solvent-free conditions. The presented method has the following advantages: (1) the high-yielding peptide synthesis uses a tantalum catalyst for any amino acids; (2) the reaction proceeds without any racemization; (3) the new substrate-directed chemical ligation using the titanium catalyst is applicable to convergent peptide synthesis. These advantages overcome some of the unresolved problems in classical peptide synthesis.