Research on carbon black and cerium co-doped Ti4O7-CB-Ce electrocatalytic oxidation of tetracycline-based antibiotics.

Elemental doping is a promising way for enhancing the electrocatalytic activity of metal oxides. Herein, we fabricate Ti/ Ti4O7-CB-Ce anode materials by the modification means of carbon black and cerium co-doped Ti4O7, and this shift effectively improves the interfacial charge transfer rate of Ti4O7 and •OH yield in the electrocatalytic process. Remarkably, the Ti4O7-CB-Ce anode exhibits excellent efficiency of minocycline (MNC) wastewater treatment (100% removal within 20 min), and the removal rate reduces from 100 to 98.5% after five cycles, which is comparable to BDD electrode. •OH and 1O2 are identified as the active species in the reaction. Meanwhile, it is discovered that Ti/ Ti4O7-CB-Ce anodes can effectively improve the biochemical properties of the non-biodegradable pharmaceutical wastewater (B/C values from 0.25 to 0.44) and significantly reduce the toxicity of the wastewater (luminescent bacteria inhibition rate from 100 to 26.6%). This work paves an effective strategy for designing superior metal oxides electrocatalysts.

Iron Nano Biocomposite-Infused Biopolymeric Films: A Multifunctional Approach for Robust Skin Repair.

Sodium alginate (SA) biopolymeric films have various limitations such as poor mechanical properties, high vapor permeability, lack of antibacterial activity, excessive burst release, and weak cell adhesion. To overcome these limitations, a strategy involving the integration of nanofillers into an SA film matrix is explored. In this context, a cost-effective iron-containing carbon nano biocomposite (FeCNB) nanofiller is developed using a solvent-free technique. This nanocomposite is successfully incorporated into the alginate film matrix at varying concentrations (0.05, 0.1, and 0.15%) aimed at enhancing its physicochemical and biological properties for biomedical applications. Characterization through FESEM and BET analyses confirms the porous nature of the FeCNB. EDX shows the FeCNB's uniform distribution upon its integration into the film matrix, albeit without strong chemical interaction with SA. Instead, hydrogen bonding interactions become apparent in the FTIR spectra. By incorporating the FeCNB, the mechanical attributes of the films are improved and the water vapor permeability approaches the desired range (2000-2500 g/m2day). The film's swelling ratio reduction contributes to a decrease in water permeability. The antibacterial activity and sustained release property of the FeCNB-incorporated film are established using tetracycline hydrochloride (TCl), a model drug. The drug release profile resembled Korsmeyer-Peppas's release pattern. In vitro assessments via the MTT assay and scratch assay on NIH-3T3 cells reveal that FeCNB has no adverse effects on the biocompatibility of alginate films. The cell proliferation and adhesion to the SA film are significantly enhanced after infusion of the FeCNB. The in vivo study performed on the rat model demonstrates improved wound healing by FeCNB-impregnated films. Based on the comprehensive findings, the proposed FeCNB-incorporated alginate films prove to be a promising candidate for robust skin repair.

Highly efficient degradation of tetracycline in groundwater by nanoscale zero-valent iron-copper bimetallic biochar: active [H] attack and direct electron transfer mechanism.

Development of carbon materials with high activity was important for rapid degradation of emerging pollutants. In this paper, a novel nanoscale zero-valent iron-copper bimetallic biochar (nZVIC-BC) was synthesized by carbothermal reduction of waste pine wood and copper-iron layered double hydroxides (LDHs). Characterization and analysis of its structural, elemental, crystalline, and compositional aspects using XRD, FT-IR, SEM, and TEM confirmed the successful preparation of nZVIC-BC and the high dispersion of Fe-Cu nanoparticles in an ordered carbon matrix. The experimental results showed that the catalytic activity of nZVIC-BC (Kobs of 0.0219 min-1) in the degradation of tetracycline (TC) in anoxic water environment was much higher than that of Fe-BC and Cu-BC; the effective degradation rate reached 85%. It was worth noting that the negative effects of Ca2+, Mg2+, and H2PO4- on TC degradation at ionic strengths greater than 15 mg/L were due to competition for active sites. Good stability and reusability were demonstrated in five consecutive cycle tests for low leaching of iron and copper. Combined with free radical quenching experiments and XPS analyses, the degradation of TC under air conditions was only 62%, with hydroxyl radicals (·OH) playing a dominant role. The synergistic interaction between Fe2+/Fe3+ and Cu0/Cu+/Cu2+ under nitrogen atmosphere enhances the redox cycling process; π-π adsorption, electron transfer processes, and active [H] were crucial for the degradation of TC; and possible degradation pathways of TC were deduced by LC-MS, which identified seven major aromatic degradation by-products. This study will provide new ideas and materials for the treatment of TC.

Simultaneous removal of tetracycline hydrochloride and hexavalent chromium by heterogeneous Fenton in a photocatalytic fuel cell system.

In this work, a novel double-chamber system (PFC-Fenton), combined photocatalytic fuel cell (PFC) with Fenton, was constructed for tetracycline hydrochloride (TCH) and hexavalent chromium (Cr(VI)) removal and electricity production. Therein, Zn5(OH)6(CO3)2/Fe2O3/BiVO4/fluorine-doped SnO2 (ZIO/BiVO4/FTO) and carboxylated carbon nanotubes/polypyrrole/graphite felt (CCNTs/Ppy/GF) were served as photoanode and cathode, respectively. Under light irradiation, the removal efficiencies of TCH and Cr(VI) with the addition of H2O2 (2 mL) could reach 93.1% and 80.4%, respectively. Moreover, the first-order kinetic constants (7.37 × 10-3 min-1 of TCH and 3.94 × 10-3 min-1 of Cr(VI)) were 5.26 and 5.57 times as much as the absence of H2O2. Simultaneously, the maximum power density could be obtained 0.022 mW/cm2 at a current density of 0.353 mA/cm2. Therein, the main contribution of TCH degradation was ·OH and holes in anode chamber. The synergistic effect of photoelectrons, generated ·O2-, and H2O2 played a crucial role in the reduction of Cr(VI) in cathode chamber. The high-performance liquid chromatography-mass spectrometry indicated that TCH could be partially mineralized into CO2 and H2O. X-ray photoelectron spectroscope and X-ray absorption near-edge structure spectra showed that Cr(VI) could be reduced to Cr(III). After 5 times of cycling, the removal efficiencies of TCH and Cr(VI) were still greater than 70%, indicating the remarkable stability of the PFC-Fenton system. Overall, this system could remove TCH/Cr(VI) and generate power simultaneously without iron sludge formation, demonstrating a promising method to further develop PFC-Fenton technology.

An innovative Zn3In2S6/ZnIn2S4 homojunction photocatalyst with enhanced interfacial charge transfer for the highly efficient degradation of tetracycline under visible radiation.

The interfacial charge transfer ability is a decisive factor influencing the photocatalytic performance of composite photocatalysts. Compared with heterojunctions that combine two or more semiconductors with different properties, homojunctions that combine two semiconductors with similar properties can accelerate the interfacial charge shift and achieve higher photocatalyticability. In this study, a Zn3In2S6/ZnIn2S4 homojunction photocatalyst (ZIS-5) with a Zn3In2S6 to ZnIn2S4 molar ratio of 5:1 was synthesized by selecting Zn3In2S6 nano-microspheres as the substrate material and growing ZnIn2S4 flocs on the nano-microspheres. The photocatalytic performance of the ZIS-5 homojunction was assessed by using tetracycline (TC) as a typical pollutant. The photocatalytic performance and mineralization rate of the ZIS-5 homojunction were significantly improved compared with those of Zn3In2S6 and ZnIn2S4, and its photocatalytic performance was increased by 10.2% and 20.9%, compared with Zn3In2S6 and ZnIn2S4, respectively, while the mineralization rate was enhanced by 22.78% and 43.28%, respectively. The results of the comparison experiment revealed that the interfacial electron transfer ability of the ZIS-5 homojunction is 1.6 times that of the g-C3N4/ZnIn2S4-5 heterojunction. The density functional theory (DFT) computation and Mott-Schottky plots verified the formation of an internal electric field. The toxicity analysis showed that the ZIS-5 homojunction system effectively reduced the toxicity of TC. This work supplies a valuable route for inventing catalysts with efficient photocatalytic performances.

Aging and adsorption behavior of PP-MPs for methylene blue and tetracycline in unitary and binary systems.

The omnipresence of microplastics (MPs) around the world has attracted extensive attention in the past decade with more focuses on the interactions of standard MPs without additives in regular shapes and individual pollutant, whereas the actual MPs containing various additives in irregular shapes and complex pollutants are often co-occurrence in the environments. In this paper, the adsorption performance of disposable polypropylene (PP) cups-based MPs subjected to ultraviolet irradiation was investigated in unitary and binary water matrices. The surface characteristics were analyzed and the experimental data of adsorption were fitted by various kinetic and isotherm models, and the results indicated that more cracks and oxygen-containing functional groups with decreased hydrophobicity were produced with aging, and electrostatic attraction and hydrogen bonding dominated methylene blue (MB) and tetracycline (TC) capture in the individual system. Moreover, pseudo-second order kinetic model better described the adsorption processes. In the binary system, the co-existence of TC promoted MB uptake, while the presence of MB inhibited TC capture. In addition, TC adsorption was enhanced by Ca2+, maybe due to its complexation effect, while the presence of mono- and divalent inorganic salts inhibited MB capture. This research provides useful insights for the fate of PP-MPs and organic pollutants in the complex environments.

Insights into sunlight-driven transformation of tetracycline by iron (hydr)oxides: The dominating role of self-generated hydrogen peroxide.

Iron (hydr)oxides are abundant in surface environment, and actively participate in the transformation of organic pollutants due to their large specific surface areas and redox activity. This work investigated the transformation of tetracycline (TC) in the presence of three common iron (hydr)oxides, hematite (Hem), goethite (Goe), and ferrihydrite (Fh), under simulated sunlight irradiation. These iron (hydr)oxides exhibited photoactivity and facilitated the transformation of TC with the initial phototransformation rates decreasing in the order of: Hem > Fh > Goe. The linear correlation between TC removal efficiency and the yield of HO• suggests that HO• dominated TC transformation. The HO• was produced by UV-induced decomposition of self-generated H2O2 and surface Fe2+-triggered photo-Fenton reaction. The experimental results indicate that the generation of HO• was controlled by H2O2, while surface Fe2+ was in excess. Sunlight-driven H2O2 production in the presence of the highly crystalline Hem and Goe occurred through a one-step two-electron reduction pathway, while the process was contributed by both O2-induced Fe2+ oxidation and direct reduction of O2 by electrons on the conduction band in the presence of the poorly crystalline Fh. These findings demonstrate that sunlight may significantly accelerate the degradation of organic pollutants in the presence of iron (hydr)oxides.

Nanostructured rhodamine B/aluminosilicate extracted sugarcane bagasse modified with tobacco-derived carbon quantum dot as ratiometric fluorescence probe for determination of tetracycline.

Tetracycline (TC), as a widely used antibiotic, is very useful in treating bacterial infections. However, its residues in animal foodstuffs can enter the human body through the food cycle and causes severe and chronic diseases. On the other hand, due to its weak non-biodegradability, it is considered a threat to the environment. In this regard, the development of sensing methods to detect and measure TC is need of the hour. Herein, a dual-emission fluorescence sensor based on porous aluminosilicate structure (ASS) with rough surface hexagonal shape morphology and pore diameter less than 2 nm was prepared. The porous AAS was modified by post-modification method with blue carbon dots (CDT) and rhodamine B (RB) as two fluorophores to develop the ratiometric fluorescence (RF) sensor (CDT-AAS/RB). Nanostructured CDT-AAS/RB emitted two resolved peaks at 445 and 585 nm , which were dramatically quenched in the presence of TC. The RF sensor, with excellent sensitivity, was able to measure TC over the linear range of 0.001-150 µM with a limit of detection of 5.4 nM in the aqueous phosphate buffer. Moreover, the AAS component granted high selectivity and anti-interference ability to the sensor. In addition, the stability of the sensor was greatly improved due to the non-accumulation of CDT nanoparticles and RB molecules in the presence of the AAS. The proposed method was able to determine TC in complex real samples with satisfactory recovery, and the obtained results were validated with standard high-performance liquid chromatography technique.

Endogenous iron-enriched biochar derived from steel mill wastewater sludge for tetracycline removal: Heavy metals stabilization, adsorption performance and mechanism.

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g-1, which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe3O4 and MgFe2O4) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater.

Phyto-fabricated ZnO nanoparticles for anticancer, photo-antimicrobial effect on carbapenem-resistant/sensitive Pseudomonas aeruginosa and removal of tetracycline.

Alternanthera sessilis (AS) leaf extract was used to synthesize zinc oxide nanoparticles (ZnO NPs). Bioanalytical characterization techniques such as X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) confirmed the formation of crystalline ZnO NPs with average sizes of 40 nm. The AS-ZnO NPs antimicrobial activity was analyzed under dark (D) and white light (WL) conditions. The improved antimicrobial activity was observed against Escherichia coli, Staphylococcus aureus and Bacillus subtilis at the minimal inhibitory concentration (MIC) of 125 and 62.5 µg/mL under WL than the D at 125 and 250 µg/mL for E. coli, B. subtilis, and Pseudomonas aeruginosa, respectively. In contrast, the growth of P. aeruginosa and S. aureus was not completely inhibited until 1 mg/mL AS-ZnO NPs under WL and D. Similarly, AS-ZnO NPs displayed a weaker inhibitory effect against carbapenem-sensitive P. aeruginosa (CSPA) and carbapenem-resistant P. aeruginosa (CRPA) strains of PAC023, PAC041 and PAC032, PAC045 under D. Interestingly, the distinct inhibitory effect was recorded against CSPA PAC041 and CRPA PAC032 in which the bacteria growth was inhibited 99.9% at 250, 500 µg/mL under WL. The cytotoxicity results suggested AS-ZnO NPs demonstrated higher toxicity to MCF-7 breast cancer cells than the RAW264.7 macrophage cells. Further, AS-ZnO NPs exhibited higher catalytic potential against tetracycline hydrochloride (TC-H) degradation at 65.6% and 60.8% under WL than the dark at 59.35% and 48.6% within 120 min. Therefore, AS-ZnO NPs can be used to design a photo-improved antimicrobial formulation and environmental catalyst for removing TC-H from wastewater.

Iron­calcium dual crosslinked graphene oxide/alginate aerogel microspheres for extraordinary elimination of tetracycline in complex wastewater: Performance, mechanism, and applications.

Antibiotics have been considered as a group of emerging contaminants for their stable chemical structure, significant pseudo-persistence, and biological toxicity. Tetracycline (TC), as one of the typical antibiotics frequently detected in environmental media, can cause the dissemination and accumulation of antibiotic resistance gene (ARG), ultimately threatening human health and environmental safety. Herein, a novel iron­calcium di-crosslinked graphene oxide/alginate (GO/SA-Fe3+-Ca2+) aerogel was facilely synthesized for TC uptake. It was found that the introduction of GO nanosheets and Fe3+ sites into composite enormously enhanced TC removal. Specifically, TC can be stably and efficiently eliminated over the wide pH range of 5-8. The fitted maximum qe with Liu isotherm model at 308 K reached 1664.05 mg/g, surpassing almost all reported sorbents. The pseudo-second-order kinetic model with chemical sorption characteristics better fitted TC adsorption process, which was endothermic and spontaneous in nature. Multifarious adsorptive sites of GO/SA-Fe3+-Ca2+ synergically participated in TC uptake through multi-mechanisms (e.g., π-π EDA, cation-π bonding, H-bonding, Fe3+-coordination, and electrostatic attraction, etc.). The as-prepared composite showed satisfactory TC removal in several runs of adsorption-desorption operations, high salinity, and model aquaculture wastewater. Moreover, the packed-column could continuously run for >200 h until adsorption saturation was achieved with a dynamic adsorption capacity of 216.69 mg/g, manifesting its scale-up engineering applications. All above merits make as-constructed composite an alternative sorbent for eliminating TC from complex wastewater.

Bimetallic iron-nickel phosphide as efficient peroxymonosulfate activator for tetracycline hydrochloride degradation: Performance and mechanism.

Sulfate radical-based advanced oxidation processes with (SR-AOPs) are widely employed to degrade organic pollutants due to their high efficiency, cost-effectiveness and safety. In this study, a highly active and stable FeNiP was successfully prepared by reduction and heat treatment. FeNiP exhibited high performance of peroxymonosulfate (PMS) activation for tetracycline hydrochloride (TC) removal. Over a wide pH range, an impressive TC degaradation efficiency 97.86% was achieved within 60 min employing 0.1 g/L FeNiP and 0.2 g/L PMS at room temperature. Both free radicals of SO4·-, ·OH, ·O2- and non-free radicals of 1O2 participated the TC degradation in the FeNiP/PMS system. The PMS activation ability was greatly enhanced by the cycling between Ni and Fe bimetal, and the active site regeneration was achieved due to the existence of the negatively charged Pn-. Moreover, the FeNiP/PMS system exhibited substantial TC degradation levels in both simulated real-world disturbance scenarios and practical water tests. Cycling experiments further affirmed the robust stability of FeNiP catalyst, demonstrating sustained degradation efficiency of approximately 80% even after four cycles. These findings illuminate its promising potential across natural water bodies, presenting an innovative catalyst construction approach for PMS activation in the degradation of antibiotic pollutants.

Mechanochemical synthesis of microscale zero-valent iron/N-doped graphene-like biochar composite for degradation of tetracycline via molecular O2 activation.

In this study, we prepared a micron zero-valent iron/N-doped graphene-like biochar (mZVI/NGB) composite using a mechanochemical method for tetracycline (TC) degradation through O2 activation. The mZVI and NGB components formed a strong coupling catalytic system, with mZVI acting as an electron pool and NGB as a catalyst for H2O2 generation. Under circumneutral pH (5.0-6.8), the mZVI/NGB composite exhibited exceptional TC removal efficiency, reaching nearly 100 % under optimal conditions. It also showed good tolerance to co-existing anions, such as Cl-, SO42-, and humic acid. Further studies found that the TC degradation mechanism was mainly ascribed to the non-radical pathway (1O2 and electron transfer), and the Fe2+/Fe3+ redox cycle on the composite's surface also played a crucial role in maintaining catalytic activity. This research contributes to the development of advanced materials for sustainable and effective water treatment, addressing pharmaceutical pollutant contamination in water sources.

Self-endowed magnetic photocatalysts derived from iron-rich sludge and its recycling in photocatalytic process for tetracycline degradation.

The disposal of iron-rich sludge by landfill or incineration poses environmental risks and wastes resources. The utilization of iron-rich sludge for magnetic material preparation offers a sustainable and resource-efficient solution for its disposal. Herein, self-endowed magnetic photocatalysts were initially prepared by pyrolysis using iron-rich sludge without any additives. The photocatalysts performance were evaluated for tetracycline degradation, with the highest degradation rate of 95.3 % at a concentration of 10 mg·L-1 (pH = 7) within 5 h being achieved for the photocatalyst prepared at 800 °C. The reactive radical species in the photocatalysis process were confirmed to be •OH and O2•- activated by ferrous oxygen species under light irradiation. Furthermore, quinone-like structures induced bound persistent free radicals, which emerged as the predominant factors influencing 1O2 formation. The employed photocatalyst can be efficiently separated and recovered owing to its magnetism. This work presents an economic solution for antibiotic removal using waste iron-rich sludge.

Hierarchically porous cellulose-based carbon aerogels with N-doped skeletons and encapsulated iron-based catalysts for efficient tetracycline catalytic degradation.

Three-dimensional interpenetrating and hierarchically porous carbon material is an efficient catalyst support in water remediation and it is still a daunting challenge to establish the relationship between hierarchically porous structure and catalytic degradation performance. Herein, a highly porous silica (SiO2)/cellulose-based carbon aerogel with iron-based catalyst (FexOy) was fabricated by in-situ synthesis, freeze-drying and pyrolysis, where the addition of SiO2 induced the hierarchically porous morphology and three-dimensional interpenetrating sheet-like network with nitrogen doping. The destruction of cellulose crystalline structure by SiO2 and the iron-catalyzed breakdown of glycosidic bonds synergistically facilitated the formation of electron-rich graphite-like carbon skeleton. The unique microstructure is confirmed to be favorable for the diffusion of reactants and electron transport during catalytic process, thus boosting the catalytic degradation performance of carbon aerogels. As a result, the catalytic degradation efficiency of tetracycline under light irradiation by adding only 5 mg of FexOy/SiO2 cellulose carbon aerogels was as high as 90 % within 60 min, demonstrating the synergistic effect of photocatalysis and Fenton reaction. This ingenious structure design provides new insight into the relationship between hierarchically porous structure of carbon aerogels and their catalytic degradation performance, and opens a new avenue to develop cellulose-based carbon aerogel catalysts with efficient catalytic performance.

Sulfidated nanoscale zero-valent iron derived from iron sludge for tetracycline removal: Role of sulfur and iron in reactivity and mechanisms.

Iron sludge, produced during the drinking water treatment process, can be recycled as potential iron resource to create environmental functional material. In this study, sulfur-iron composites derived from iron sludge (S-Fe composites) was synthesized through sulfidation and carbonization, and used for the tetracycline (TC) removal under aerobic and anoxic conditions. The reactivities of these as-prepared products were strongly depended on pyrolysis temperatures. In particular, sulfidated nanoscale zero-valent iron loaded on carbon (S-nFe0@CIS) carbonized at 800 °C exhibited the highest TC removal efficiency with 86.6% within 30 min at circumneutral pH compared with other S-Fe composites. The crystalline structure of α-Fe0, FeSx and S0 as main active sites in S-nFe0@CIS promoted the degradation of TC. Moreover, the Fe/S molar ratios significantly affected the TC removal rates, which reached the best value as the optimal S/Fe of 0.27. The results illustrated that the optimized extent of sulfidation could facilitate electron transfer from nFe0 towards contaminants and accelerate Fe(III)/Fe(II) cycle in reaction system compared to bared nFe0@CIS. We revealed that removal of TC by S-nFe0@CIS in the presence of dissolved oxygen (DO) is mainly attributed to oxidation, adsorption and reduction pathways. Their contribution to TC removal were 31.6%, 25.2% and 28.8%, respectively. Furthermore, this adsorption-oxygenation with the formation of S-nFe0@CIS-TC* complexes was a surface-mediated process, in which DO was transformed by the structural FeSx on complex surface to •OH with the generation of H2O2 intermediate. The intermediates of TC and toxicity analysis indicate that less toxicity products generated through degradation process. This study provides a new reclamation of iron sludge and offers a new insight into the TC removal by S-nFe0@CIS under aerobic conditions.

Preparation of chitosan-iron oxide modified sludge-based biochar for effective removal of tetracycline from water: performance and mechanism.

The release of antibiotics has attracted wide attention due to their abuse and discharge. How to remove these emerging contaminants is an urgent need to be solved. In the present study, sludge-based biochar combining chitosan and iron oxide was prepared via municipal sewage sludge. The novel biochar modified with chitosan and iron oxide exhibited satisfying performance in eliminating antibiotics from water. The application of modified biochar combined with activated persulfate (PS) showed a remarkable removal efficiency of 96.98% for tetracycline (TC). Analysis of the surface characteristics of the modified biochar showed the presence of structural defects, dispersed iron oxides, abundant functional groups, a porous structure, and a relatively stable crystal structure. These characteristics attributed significant importance to facilitating the degradation of TC. A series of experimental conditions including preparation temperature (600-900 ℃), reaction temperature (15-45 ℃), contaminant concentration (30-180 mg/L), adsorbent usage (0.1-1 g/L), pH (2-10), and persulfate addition concentration (1-5 mmol) were conducted. The results revealed that the highest removal efficiency was achieved at 96.98% under the conditions of TC concentration at 30 mg/L, reaction temperature at 35 ℃, pH of 4, adsorbent addition amount of 0.6 g/L, and PS concentration of 2 mmol, respectively. Three degradation pathways and seven intermediate products of TC were proposed. Therefore, our study provides a promising approach for developing effective removal of antibiotic pollutants.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion.

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of ß-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Peroxymonosulfate activation by walnut shell activated carbon supported nano zero-valent iron for the degradation of tetracycline: Performance, degradation pathway and mechanism.

In this study, activated carbon (WS-AC) was prepared from walnut shell. Nano-zero-valent iron (nZVI) was loaded on walnut shell activated carbon by liquid phase reduction method and used as catalyst (WS-AC/nZVI) to activate peroxymonosulfate (PMS) to efficiently degrade tetracycline (TC) in solution. The composite material with a mass ratio of WS-AC to nZVI of 1:1 has the highest catalytic performance for activating PMS to degrade TC. The results showed that under the conditions of TC concentration of 100 ppm, PMS dosage of 0.2 mM and WS-AC/nZVI dosage of 0.1 g/L, the removal efficiency of TC could reach 81%. Based on quenching experiments and electron spin resonance (EPR), it was verified that •OH, SO4•- and 1O2 bound on the catalyst surface were the main reactive oxygen species during the reaction. The intermediate products of TC were identified by liquid chromatography-mass spectrometry (HPLC-MS) and DFT calculation, and the possible degradation pathway of TC was proposed. The catalyst still maintained high removal efficiency of TC after four cycles of experiments, and the minimal iron loss on the surface of the catalyst indicated that it had good stability. The efficient and stable WS-AC/nZVI activated PMS showed great potential in the degradation of antibiotics.

Efficient and effective immobilization of tetracycline and copper from wastewater by zero-valent iron fabricated hydrochar derived from walnut peel.

Antibiotics and heavy metals often coexist as non-point-source contaminants in wastewater and their quite contrary physiochemical properties make their co-removal processes challenging. In this work, a bifunctional zero-valent iron-modified hydrochar derived from walnut peel (MWPHC) was synthesized, which was then applied for the simultaneous removal of tetracycline (TC) and Cu(II) from wastewater. Based on the characterizations, Fe0 species were successfully distributed on the surface of the walnut peel substrates. The TC and Cu(II) could be synergistically immobilized, and bridging effects were observed between them, and MWPHC exhibited excellent ability on the simultaneous removal of TC (qmax = 433.59 mg/g) and Cu(II) (qmax = 586.25 mg/g). Furthermore, the engineering feasibility of the MWPHC was evaluated using column and regeneration experiments. These results shed light on the tailored MWPHC as an environmental functional material for pollution control of co-existing antibiotic and heavy metal contaminants in agro-industrial wastewater.