RESUMEN
Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %-3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.
Asunto(s)
Antibacterianos , Quitosano , Emulsiones , Escherichia coli , Staphylococcus aureus , Titanio , Agua , Quitosano/química , Quitosano/farmacología , Titanio/química , Antibacterianos/química , Antibacterianos/farmacología , Staphylococcus aureus/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Agua/química , Aceites Volátiles/química , Aceites Volátiles/farmacología , Tamaño de la Partícula , Preparaciones de Acción Retardada/química , Aceites de Plantas/química , Aceites de Plantas/farmacología , Pruebas de Sensibilidad Microbiana , Liberación de FármacosRESUMEN
Maxillofacial bone defects can severely impact quality of life by impairing physiological functions such as chewing, breathing, swallowing, and pronunciation. Polyether ether ketone (PEEK) is commonly used for the repair of maxillofacial defects due to its mechanical adaptability, while its osteogenic properties still need refinement. Herein, we have utilized the piezoelectric effect exhibited by barium titanate (BTO) under low-intensity pulsed ultrasound (LIPUS) to develop an ultrasound responsive PEEK (PDA@BTO-SPEEK, PBSP) through the mediating effect of polydopamine (PDA), for repairing maxillofacial bone defects. After modification by PDA@BTO, PBSP possesses better hydrophilicity, which is conducive to cell growth and adhesion. Simultaneously, by virtue of the piezoelectric characteristics of BTO, PBSP obtains a piezoelectric coefficient that matches the bone cortex. Notably, when PBSP is stimulated by LIPUS, it can generate stable electricity and effectively accelerate the osteogenic differentiation of osteoblasts through the regulation of the Piezo1-induced calcium (Ca2+) influx and Akt/GSK3ß/ß-catenin pathway. In addition, PBSP presents satisfactory therapeutic effects in rat skull defect models, and its osteogenic efficiency can be further improved under LIPUS stimulation with high tissue penetration. Collectively, PBSP + LIPUS exhibits great potential as a promising alternative strategy for the repair of maxillofacial bone defects.
Asunto(s)
Benzofenonas , Glucógeno Sintasa Quinasa 3 beta , Cetonas , Osteogénesis , Polietilenglicoles , Polímeros , Proteínas Proto-Oncogénicas c-akt , Ratas Sprague-Dawley , beta Catenina , Animales , Glucógeno Sintasa Quinasa 3 beta/metabolismo , Polímeros/química , Osteogénesis/efectos de los fármacos , Ratas , Polietilenglicoles/química , Proteínas Proto-Oncogénicas c-akt/metabolismo , Cetonas/química , Cetonas/farmacología , beta Catenina/metabolismo , Diferenciación Celular/efectos de los fármacos , Osteoblastos/efectos de los fármacos , Ondas Ultrasónicas , Indoles/química , Indoles/farmacología , Masculino , Transducción de Señal/efectos de los fármacos , Cráneo/efectos de los fármacos , Titanio/química , Titanio/farmacología , Regeneración Ósea/efectos de los fármacosRESUMEN
PURPOSE: The movement trend of the posterior teeth and the distribution of the periodontal membrane stress were studied by using three-dimensional digital technology. METHODS: CBCT data of 88 patients admitted to our hospital from June 2017 to June 2022 were selected, and input into Mimics20.0 software for preliminary extraction of all parts and stored with STL files; then the data were repaired and optimized through Geomagic Studio 2014 software. With the help of normal phase extension, the invisible appliance and periodontal membrane were constructed. Finally, the six FEM models were simulated and observed by the current teeth in different groups. Statistical analysis was performed with SPSS 21.0 software package. RESULTS: The effect force of the largest periodontal membrane was distributed in the neck of the tooth, followed by the apical area, with the maximum effect force value in the NA group. In all accessory groups, the periodontal membrane maximum paradigm isoeffect force values of all patients in the accessory vertical rectangular group were significantly smaller than the values obtained in the horizontal rectangular group. CONCLUSIONS: The design of orthodontic tooth accessories has a strong inhibition effect on the position movement of anterior teeth during recovery, which improves the accuracy of tooth three-dimensional movement to a certain extent. Meanwhile, the normal equivalent stress of the periodontal membrane of patients in the initial application of the invisible appliance without brackets is large.
Asunto(s)
Níquel , Humanos , Níquel/química , Titanio/química , Técnicas de Movimiento Dental/métodos , Técnicas de Movimiento Dental/instrumentación , Tomografía Computarizada de Haz Cónico/métodos , Estrés Mecánico , Análisis de Elementos Finitos , Imagenología Tridimensional/métodos , Rayos InfrarrojosRESUMEN
PURPOSE: The fatigue resistance of mechanical nickel-titanium files was tested by phase-locked infrared flaw detection method, in order to timely detect instrument wear, providing reference for clinical safe use and timely abandonment of nickel-titanium files. METHODS: Twenty sets of mechanical nickel-titanium files were selected from Reciproc-Blue(RB), MTWO and S3 respectively, and resin simulated root canals with 60° and 90° bending were prepared, which were divided into 6 subgroups. The fatigue value after use, the number of uses before breaking and the length of fracture of file 25# of each group of files were recorded and compared with SPSS 26.0 software package. RESULTS: With the increase of the times of use, the fatigue value of the three kinds of files increased gradually. Among the two types of curved root canals, the number of uses before fracture in RB group was significantly increased compared with that in MTWO group and S3 group (Pï¼0.05). The number of uses of the three kinds of files in the 90° curved root canal were significantly less than in the corresponding groups in the 60° curved root canal(Pï¼0.05). There was no significant difference in the length of fracture among the three kinds of files(Pï¼0.05). CONCLUSIONS: Phase-locked infrared flaw detection method can be used for non-destructive testing and quantitative analysis of the fatigue degree of nickel-titanium files.
Asunto(s)
Níquel , Titanio , Níquel/química , Titanio/química , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Ensayo de Materiales/métodos , Falla de Equipo , Estrés Mecánico , Cavidad PulparRESUMEN
The online monitoring of GIS equipment can be realized through detecting SF6 decomposition gasses. Metal oxide heterojunctions are widely used as gas-sensing materials. In this study, the structural and electrical properties of In2O3-ZnO and TiO2-ZnO heterojunctions were analyzed based on density functional theory calculations. After heterojunction structural optimization, the electrical conductivity of these two heterojunctions was enhanced compared to each intrinsic model, and the electrical conductivity is ranked as follows: In2O3-ZnO heterojunction > TiO2-ZnO heterojunction. The gas-sensing response of these two heterojunctions to four SF6 decomposition gasses, H2S, SO2, SOF2, and SO2F2, was investigated. For gas adsorption systems, the adsorption energy, charge transfer, density of states, charge difference density, and frontier molecular orbitals were calculated to analyze the adsorption and gas-sensing performance. For gas adsorption on the In2O3-ZnO heterojunction surface, the induced conductivity changes are in the following order: H2S > SO2F2 > SOF2 > SO2. For gas adsorption on the TiO2-ZnO heterojunction surface, H2S and SOF2 increase conductivity, and SO2 and SO2F2 decrease conductivity.
Asunto(s)
Teoría Funcional de la Densidad , Gases , Titanio , Titanio/química , Gases/química , Adsorción , Conductividad Eléctrica , Óxidos/química , Óxido de Zinc/química , Hexafluoruro de Azufre/química , Dióxido de Azufre/química , IndioRESUMEN
The pro-inflammatory/anti-inflammatory polarized phenotypes of macrophages (M1/M2) can be used to predict the success of implant integration. Hence, activating and inducing the transformation of immunocytes that promote tissue repair appears to be a highly promising strategy for facilitating osteo-anagenesis. In a previous study, titanium implants were coated with a graphene oxide-hydroxyapatite (GO-HA) nanocomposite via electrophoretic deposition, and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was found to be significantly enhanced when the GO content was 2wt%. However, the effectiveness of the GO-HA nanocomposite coating in modifying the in vivo immune microenvironment still remains unclear. In this study, the effects of GO-HA coatings on osteogenesis were investigated based on the GO-HA-mediated immune regulation of macrophages. The HA-2wt%GO nanocomposite coatings exhibited good biocompatibility and favored M2 macrophage polarization. Meanwhile, they could also significantly upregulate IL-10 (anti-inflammatory factor) expression and downregulate TNF-α (pro-inflammatory factor) expression. Additionally, the microenvironment, which was established by M2 macrophages, favored the osteogenesis of BMSCs both in vivo and in vitro. These findings show that the GO-HA nanocomposite coating is a promising surface-modification material. Hence, this study provides a reference for the development of next-generation osteoimmunomodulatory biomaterials.
Asunto(s)
Materiales Biocompatibles Revestidos , Durapatita , Grafito , Macrófagos , Células Madre Mesenquimatosas , Oseointegración , Osteogénesis , Oseointegración/efectos de los fármacos , Durapatita/química , Durapatita/farmacología , Macrófagos/efectos de los fármacos , Macrófagos/inmunología , Macrófagos/metabolismo , Macrófagos/citología , Animales , Grafito/química , Grafito/farmacología , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Osteogénesis/efectos de los fármacos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de los fármacos , Ratones , Materiales Biomiméticos/química , Materiales Biomiméticos/farmacología , Prótesis e Implantes , Inmunomodulación/efectos de los fármacos , Nanocompuestos/química , Células RAW 264.7 , Diferenciación Celular/efectos de los fármacos , Titanio/química , Titanio/farmacología , MasculinoRESUMEN
This paper deals with the combined effects of immune response and osseointegration because of the lack of comprehensive studies on this topic. An antibacterial Ti surface was considered because of the high risk of infection for titanium bone implants. A chemically treated Ti6Al4 V alloy [Ti64(Sr-Ag)] with a microporous and Sr-Ag doped surface was compared to a polished version (Ti64) regarding protein adsorption (albumin and fibronectin) and osteoimmunomodulation. Characterization via fluorescence microscopy and zeta potential showed a continuous fibronectin layer on Ti64(Sr-Ag), even with preadsorbed albumin, while it remained filamentous on Ti64. Macrophages (differentiated from THP-1 monocytes) were cultured on both surfaces, with viability and cytokine release analyzed. Differently from Ti64, Ti64(Sr-Ag) promoted early anti-inflammatory responses and significant downregulation of VEGF. Ti64(Sr-Ag) also enhanced human bone marrow mesenchymal cell differentiation toward osteoblasts, when a macrophage-conditioned medium was used, influencing ALP production. Surface properties in relation to protein adsorption and osteoimmunomodulation were discussed.
Asunto(s)
Aleaciones , Macrófagos , Propiedades de Superficie , Titanio , Titanio/química , Aleaciones/química , Aleaciones/farmacología , Adsorción , Humanos , Macrófagos/efectos de los fármacos , Macrófagos/inmunología , Diferenciación Celular/efectos de los fármacos , Osteoblastos/efectos de los fármacos , Osteoblastos/citologíaRESUMEN
N-doped TiO2/carbon composites (N-TiPC) have shown excellent photodegradation performances to the organic contaminants but are limited by the multistage preparation (i.e., preparation of porous carbon, preparation of N-doped TiO2, and loading of N-doped TiO2 on porous carbon). Here, we develop a handy way by combining the Pickering emulsion-gel template route and chelation reaction of polysaccharides. The N-TiPC is obtained by calcinating pectin/Dl-serine hydrazide hydrochloride (SHH)-Ti4+ chelate and is further described by modern characterization techniques. The results show that the N atom is successfully doped into the TiO2 lattice, and the bandgap value of N-TiPC is reduced to 2.3 eV. Moreover, the particle size of N-TiPC remains about 10 nm. The configurations of the composites are simulated using DFT calculation. The photocatalytic experiments show that N-TiPC has a high removal efficiency for methylene blue (MB) and oxytetracycline hydrochloride (OTC-HCL). The removal ratios of MB (20 mg/L, 50 mL) and OTC-HCL (30 mg/L, 50 mL) are 99.41 % and 78.29 %, respectively. The cyclic experiments show that the photocatalyst has good stability. Overall, this study provides a handy way to form N-TiPC with enhanced photodegradation performances. It can also be promoted to other macromolecules such as cellulose and its derivatives, sodium alginate, chitosan, lignin, etc.
Asunto(s)
Carbono , Pectinas , Serina , Titanio , Pectinas/química , Titanio/química , Carbono/química , Serina/química , Nitrógeno/química , Catálisis , Fotólisis , Porosidad , Azul de Metileno/químicaRESUMEN
Porous poly (lactic-co-glycolic acid)/ß-tricalcium phosphate/Icaritin (PLGA/ß-TCP/ICT, PTI) scaffold is a tissue engineering scaffold based on PLGA/ß-TCP (PT) containing Icaritin, the main active ingredient of the Chinese medicine Epimedium. Due to its excellent mechanical properties and osteogenic effect, PTI scaffold has the potential to promote bone defect repair. However, the release of ICT from the scaffolds is difficult to control. In this study, we constructed Ti3C2Tx@PLGA/ICT microspheres (TIM) and evaluated their characterization as well as ICT release under near-infrared (NIR) irradiation. We utilized TIM to modify the PT scaffold and performed biological experiments. First, we cultured rat bone marrow mesenchymal stem cells on the scaffold to assess biocompatibility and osteogenic potential under on-demand NIR irradiation. Subsequently, to evaluate the osteogenic properties of TIM-modified scaffoldin vivo, the scaffold was implanted into a femoral condyle defect model. TIM have excellent drug-loading capacity and encapsulation efficiency for ICT, and the incorporation of Ti3C2Txendows TIM with photothermal conversion capability. Under 0.90 W cm-2NIR irradiation, the temperature of TIM maintained at 42.0 ± 0.5 °C and the release of ICT was accelerated. Furthermore, while retaining its original properties, the TIM-modified scaffold was biocompatible and could promote cell proliferation, osteogenic differentiation, and biomineralizationin vitro, as well as the osteogenesis and osseointegrationin vivo, and its effect was further enhanced through the modulation of ICT release under NIR irradiation. In summary, TIM-modified scaffold has the potential to be applied in bone defects repairing.
Asunto(s)
Regeneración Ósea , Fosfatos de Calcio , Flavonoides , Células Madre Mesenquimatosas , Microesferas , Osteogénesis , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Ratas Sprague-Dawley , Ingeniería de Tejidos , Andamios del Tejido , Animales , Regeneración Ósea/efectos de los fármacos , Andamios del Tejido/química , Fosfatos de Calcio/química , Ratas , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Células Madre Mesenquimatosas/citología , Osteogénesis/efectos de los fármacos , Flavonoides/química , Flavonoides/farmacología , Ingeniería de Tejidos/métodos , Titanio/química , Rayos Infrarrojos , Masculino , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Proliferación Celular/efectos de los fármacosRESUMEN
Ultrasound radiation has been widely used in biomedical application for both diagnosis and therapy. Metal oxides nanoparticles (NPs), like ZnO or TiO2 NPs, have been widely demonstrated to act as excellent sonocatalysts and significantly enhance cavitation at their surface, making them optimal for sonodynamic cancer therapy. These NPs often possess semiconductive and piezoelectric properties that contribute to the complex phenomena occurring at the water-oxide interface during sonostimulation. Despite the great potential in applied sonocatalysis and water splitting, the complex mechanism that governs the phenomenon is still a research subject. This work investigates the role of piezoelectric ZnO micro- and nano-particles in ultrasound-assisted water oxidation. Three metal oxides presenting fundamental electronic and mechanical differences are evaluated in terms of ultrasound-triggered reactive oxygen species generation in aqueous media: electromechanically inert SiO2 NPs, semiconducting TiO2 NPs, piezoelectric and semiconducting ZnO micro- and nanoparticles with different surface areas and sizes. The presence of silver ions in the aqueous solution was further considered to impart a potential electron scavenging effects and better evaluate the oxygen generation performances of the different structures. Following sonoirradiation, the particles are optically and chemically analyzed to study the effect of sonostimulation at their surface. The production of gaseous molecular oxygen is measured, revealing the potential of piezoelectric particles to generate oxygen under hypoxic conditions typical of some cancer environments. Finally, the best candidates, i.e. ZnO nano and micro particles, were tested on osteosarcoma and glioblastoma cell lines to demonstrate their potential for cancer treatment.
Asunto(s)
Oxidación-Reducción , Agua , Óxido de Zinc , Agua/química , Catálisis , Óxido de Zinc/química , Humanos , Titanio/química , Neoplasias/terapia , Ondas Ultrasónicas , Nanopartículas del Metal/química , Línea Celular Tumoral , Especies Reactivas de Oxígeno/metabolismo , Especies Reactivas de Oxígeno/química , Óxidos/químicaRESUMEN
Because nickel-titanium (NiTi) alloys have unique functions, such as superelasticity, shape memory, and hysteresis similar to bone in the loading-unloading cycles of their recoverable deformations. They likely offer good bone integration, a low loosening rate, individual customization, and ease of insertion. Due to the poor processability of NITI, traditional methods cannot manufacture NiTi products with complex shapes. Orthopedic NiTi implants need to show an adequate fracture elongation of at least 8%. Additive manufacturing can be used to prepare NiTi implants with complex structures and tunable porosity. However, as previously reported, additively manufactured NiTi alloys could only exhibit a maximum tensile fracture strain of 7%. In new reports, a selective laser melting (SLM)-NiTi alloy has shown greater tensile strain (15.6%). Nevertheless, due to the unique microstructure of additive manufacturing NiTi that differs from traditional NITI, the biocompatibility of SLM-NITI manufactured by this new process requires further evaluation In this study, the effects of the improved NiTi alloy on bone marrow mesenchymal stem cell (BMSC) proliferation, adhesion, and cell viability were investigated via in vitro studies. A commercial Ti-6Al-4V alloy was studied side-by-side for comparison. Like the Ti-6Al-4V alloy, the SLM-NiTi alloy exhibited low cytotoxicity toward BMSCs and similar effect on cell adhesion or cell viability. This study demonstrates that the new SLM-NiTi alloy, which has exhibited improved mechanical properties, also displays excellent biocompatibility. Therefore, this alloy may be a superior implant material in biomedical implantation.
Asunto(s)
Aleaciones , Materiales Biocompatibles , Adhesión Celular , Proliferación Celular , Supervivencia Celular , Ensayo de Materiales , Células Madre Mesenquimatosas , Níquel , Resistencia a la Tracción , Titanio , Titanio/química , Materiales Biocompatibles/química , Aleaciones/química , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/citología , Níquel/química , Supervivencia Celular/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Animales , Rayos Láser , Prótesis e Implantes , Estrés Mecánico , Propiedades de SuperficieRESUMEN
Engineering Z-scheme heterojunctions represents a promising strategy for optimizing the separation and migration of charge carriers in semiconductor sonosensitizers for enhanced reactive oxygen species (ROS) generation. Nevertheless, establishing a continuous and directional pathway for ultrasonic-induced charge flow in Z-scheme heterojunctions remains a significant challenge. In this study, we present a ternary Bi2WO6/TiO2-Pt heterojunction sonosensitizer achieved through the precise growth of Pt nanocrystals on a directionally assembled Bi2WO6/TiO2 Z-scheme structure. The construction of the Bi2WO6/TiO2-Pt heterojunction involves directional growth of Bi2WO6 in situ on the highly exposed (001) crystal facet of TiO2 nanosheets, followed by the precise deposition of nano Pt on the edge (101) crystal facet. The Z-scheme Bi2WO6/TiO2 in the ternary heterojunction ensures effective electron separation, while the Schottky TiO2-Pt interface establishes a well-defined charge flow path and robust redox capabilities. Moreover, nano Pt confers the Bi2WO6/TiO2-Pt heterojunction with excellent peroxidase-mimic and catalase-mimic activities, facilitating interactions with endogenous H2O2 to produce the hydroxyl radicals and O2. It effectively alleviates tumor hypoxia and enhances ROS production. This results in significantly higher efficiency in sonodynamically induced ROS generation compared to pure TiO2 or binary Bi2WO6/TiO2 heterojunctions, as confirmed by DFT theoretical calculation and experiments with both in vitro and in vivo anticancer performance. This study offers valuable insights for designing high-performance Z-scheme sonosensitizer systems.
Asunto(s)
Platino (Metal) , Titanio , Titanio/química , Titanio/farmacología , Animales , Platino (Metal)/química , Platino (Metal)/farmacología , Humanos , Ratones , Bismuto/química , Bismuto/farmacología , Especies Reactivas de Oxígeno/metabolismo , Terapia por Ultrasonido , Antineoplásicos/farmacología , Antineoplásicos/química , Compuestos de Tungsteno/química , Compuestos de Tungsteno/farmacología , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacosRESUMEN
Considering the profound impact of structure on heterojunction catalysts, the rational design of emerging catalysts with optimized energy band structures is required for antitumor efficiency. Herein, we select titanium nitride (TiN) and Pt to develop a multifunctional Schottky heterojunction named Pt/H-TiN&SRF (PHTS) nanoparticles (NPs) with a narrowed bandgap to accomplish "four birds with one stone" involving enzyo/sono/photo three modals and additional ferroptosis. The in situ-grown Pt NPs acted as electron traps that can cause the energy band to bend upward and form a Schottky barrier, thereby facilitating the separation of electron/hole pairs in exogenous stimulation catalytic therapy. In addition, endogenous catalytic reactions based on peroxidase (POD)- and catalase (CAT)-mimicking activities can also be amplified, triggering intense oxidative stress, in which CAT-like activity decomposes endogenous H2O2 into O2 alleviating hypoxia and provides reactants for sonodynamic therapy. Moreover, PHTS NPs can elicit mild photothermal therapy with boosted photothermal properties as well as ferroptosis with loaded ferroptosis inducer sorafenib for effective tumor ablation and apoptosis-ferroptosis synergistic tumor inhibitory effect. In summary, this paper proposes an attractive design for antitumor strategies and highlights findings for heterojunction catalytic therapy with potential in tumor theranostics.
Asunto(s)
Antineoplásicos , Titanio , Animales , Ratones , Antineoplásicos/farmacología , Antineoplásicos/química , Humanos , Titanio/química , Titanio/farmacología , Ferroptosis/efectos de los fármacos , Apoptosis/efectos de los fármacos , Platino (Metal)/química , Platino (Metal)/farmacología , Sorafenib/farmacología , Sorafenib/química , Proliferación Celular/efectos de los fármacos , Ensayos de Selección de Medicamentos Antitumorales , Terapia Fototérmica , Nanopartículas/química , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Ratones Endogámicos BALB CRESUMEN
In this work, an ultrasensitive electrochemiluminescence (ECL) biosensor was constructed based on DNA-stabilized Au Ag nanoclusters (DNA-Au Ag NCs) as the efficient luminophore and Au NPs@Ti3C2 as a new coreaction accelerator for determining microRNA-221 (miRNA-221) related to liver cancer. Impressively, DNA-Au Ag NCs were stabilized by the high affinity of the periodic 3C sequence, exhibiting an excellent ECL efficiency of 27% compared with classical BSA-Au Ag NCs (16%). Moreover, the Au NPs@Ti3C2 nanocomposites, as a new coreaction accelerator, were first introduced to accelerate the production of abundant sulfate free radicals (SO4â¢-) for promoting the ECL efficiency of DNA-Au Ag NCs in the DNA-Au Ag NCs/Au NPs@Ti3C2/S2O82- ternary system due to the energy band of Au NPs@Ti3C2 being well-matched with the frontier orbital of S2O82-. Furthermore, the trace target (miRNA-221) could drive the rolling circle amplification to generate an amount of output DNA with periodic 3C and 10A sequences. Through covalent bonds on the surface of poly A and Au NPs, the distance between the luminophor and the coreaction accelerator could be narrowed to further enhance the detection sensitivity. As a result, the constructed sensor has been applied for the ultrasensitive detection of miRNA-221 with a low detection limit of 50 aM and successfully monitored miRNA-221 in MHCC-97L and HeLa cell lysates. This strategy could be utilized for guiding the synthesis of light-emitting DNA-metal NCs, which has great potential in the construction of ultrasensitive biosensors for the early diagnosis of diseases.
Asunto(s)
Técnicas Biosensibles , ADN , Técnicas Electroquímicas , Oro , Mediciones Luminiscentes , Nanopartículas del Metal , MicroARNs , Plata , Oro/química , Técnicas Biosensibles/métodos , Plata/química , Nanopartículas del Metal/química , ADN/química , Humanos , Técnicas Electroquímicas/métodos , MicroARNs/análisis , Titanio/química , Límite de DetecciónRESUMEN
An antifouling peptide hydrogel-based electrochemical biosensor was developed for real-time monitoring of hydrogen peroxide (H2O2) and nitric oxide (NO) released by 3D cultured breast cancer cells upon drug stimulation. Platinum nanoparticles (Pt NPs) were electrodeposited on titanium mesh (Pt NPs/TM) to enhance sensitivity and shown to possess excellent electrocatalytic ability toward H2O2 and NO. The composite hydrogel formed by co-assembling of N-fluorenylmethoxycarbonyl diphenylalanine (Fmoc-FF) and a fluorine methoxycarbonyl group-functionalized Lys-(Fmoc)-Asp was coated on Pt NPs/TM electrode surface to provide cellular scaffolding. Their favorable biocompatibility promoted cell adhesion and growth, while good hydrophilicity endowed the sensor with greatly enhanced antifouling capability in complex cell culture environments. The biosensor successfully determined H2O2 and NO secretion from both non-metastatic and metastatic breast cancer cells in real time. Our results demonstrated robust associations between reactive oxygen species (ROS) and reactive nitrogen species (RNS) production and cell malignancy, with the main difference in oxidative stress between the two subtypes of cells being NO release, particularly emphasizing RNS's critical leading in driving cancer metastasis and invasion progression. This sensor holds great potential for cell-release research under the in vivo-like microenvironment and could reveal RNS as an attractive therapeutic target for treating breast cancer.
Asunto(s)
Técnicas Biosensibles , Neoplasias de la Mama , Técnicas Electroquímicas , Hidrogeles , Peróxido de Hidrógeno , Óxido Nítrico , Platino (Metal) , Humanos , Técnicas Biosensibles/métodos , Peróxido de Hidrógeno/química , Hidrogeles/química , Neoplasias de la Mama/patología , Óxido Nítrico/metabolismo , Óxido Nítrico/análisis , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , Platino (Metal)/química , Nanopartículas del Metal/química , Femenino , Péptidos/química , Péptidos/farmacología , Línea Celular Tumoral , Titanio/química , Células MCF-7 , Técnicas de Cultivo Tridimensional de Células/métodosRESUMEN
BACKGROUND: The abuse of 17ß-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial. RESULTS: We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM. SIGNIFICANCE: Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.
Asunto(s)
Técnicas Biosensibles , Colorimetría , Técnicas Electroquímicas , Electrodos , Estradiol , Técnicas de Amplificación de Ácido Nucleico , Titanio , Titanio/química , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Estradiol/análisis , Límite de Detección , Procesos Fotoquímicos , Compuestos de Selenio/química , HumanosRESUMEN
The development of electronic skin (e-skin) emulating the human skin's three essential functions (perception, protection, and thermoregulation) has great potential for human-machine interfaces and intelligent robotics. However, existing studies mainly focus on perception. This study presents a novel, eco-friendly, mechanically robust e-skin replicating human skin's three essential functions. The e-skin is composed of Ti3C2Tx MXene, polypyrrole, and bacterial cellulose nanofibers, where the MXene nanoflakes form the matrix, the bacterial cellulose nanofibers act as the filler, and the polypyrrole serves as a conductive "cross-linker". This design allows customization of the electrical conductivity, microarchitecture, and mechanical properties, integrating sensing (perception), EMI shielding (protection), and thermal management (thermoregulation). The optimal e-skin can effectively sense various motions (including minuscule artery pulses), achieve an EMI shielding efficiency of 63.32 dB at 78 µm thickness, and regulate temperature up to 129 °C in 30 s at 2.4 V, demonstrating its potential for smart robotics in complex scenarios.
Asunto(s)
Conductividad Eléctrica , Polímeros , Dispositivos Electrónicos Vestibles , Humanos , Polímeros/química , Pirroles/química , Nanofibras/química , Celulosa/química , Piel/química , Regulación de la Temperatura Corporal , Titanio/química , RobóticaRESUMEN
Titanium alloys represent the prevailing material employed in orthopedic implants, which are present in millions of patients worldwide. The prolonged presence of these implants in the human body has raised concerns about possible health effects. This study presents a comprehensive analysis of titanium implants and surrounding tissue samples obtained from patients who underwent revision surgery for therapeutic reasons. The surface of the implants exhibited nano-scale corrosion defects, and nanoparticles were deposited in adjacent samples. In addition, muscle in close proximity to the implant showed clear evidence of fibrotic proliferation, with titanium content in the muscle tissue increasing the closer it was to the implant. Transcriptomics analysis revealed SNAI2 upregulation and activation of PI3K/AKT signaling. In vivo rodent and zebrafish models validated that titanium implant or nanoparticles exposure provoked collagen deposition and disorganized muscle structure. Snai2 knockdown significantly reduced implant-associated fibrosis in both rodent and zebrafish models. Cellular experiments demonstrated that titanium dioxide nanoparticles (TiO2 NPs) induced fibrotic gene expression at sub-cytotoxic doses, whereas Snai2 knockdown significantly reduced TiO2 NPs-induced fibrotic gene expression. The in vivo and in vitro experiments collectively demonstrated that Snai2 plays a pivotal role in mediating titanium-induced fibrosis. Overall, these findings indicate a significant release of titanium nanoparticles from the implants into the surrounding tissues, resulting in muscular fibrosis, partially through Snai2-dependent signaling.
Asunto(s)
Fibrosis , Factores de Transcripción de la Familia Snail , Titanio , Pez Cebra , Titanio/química , Animales , Factores de Transcripción de la Familia Snail/metabolismo , Factores de Transcripción de la Familia Snail/genética , Humanos , Prótesis e Implantes , Masculino , Transducción de Señal/efectos de los fármacos , Nanopartículas del Metal/química , Músculo Esquelético/metabolismo , Músculo Esquelético/efectos de los fármacos , Ratas , RatonesRESUMEN
Exosomes are increasingly being regarded as emerging and promising biomarkers for cancer screening, diagnosis, and therapy. The downstream molecular analyses of exosomes were greatly affected by the isolation efficiency from biosamples. Among the current exosome isolation strategies, affinity nanomaterials performed comparably better with selectivity and specificity. However, these techniques did not take the structure and size of exosomes into account, which may lead to a loss of isolation efficiency. In this article, a framework nucleic acid was employed to prepare a well-designed nanosized bead Fe3O4@pGMA@DNA TET@Ti4+ for enrichment of exosomes. The abundant phosphate groups in the framework nucleic acid provide binding sites to immobilize Ti4+, and its rigid three-dimensional skeleton makes them act as roadblocks to barricade exosomes and provide affinity interactions on a three-dimensional scale, resulting in the improvement of isolation efficiency. The model exosomes can be effectively isolated with 92% recovery in 5 min. From 100 µL of HeLa cell culture supernatant, 34 proteins out of the top 100 commonly identified exosomal proteins were identified from the isolated exosomes by the novel beads, which is obviously more than that by TiO2 (19 proteins), indicating higher isolation efficiency and exosome purity by Fe3O4@pGMA@DNA TET@Ti4+ beads. The nanobeads were finally applied for comparing exosomal proteomics analysis from real clinical serum samples. Twenty-five upregulated and 10 downregulated proteins were identified in the lung cancer patients group compared to the health donors group, indicating that the novel nanobeads have great potential in isolation of exosomes for exosomal proteomics analysis in cancer screening and diagnosis.
Asunto(s)
Exosomas , Proteómica , Exosomas/química , Humanos , Proteómica/métodos , Células HeLa , Titanio/química , Nanopartículas de Magnetita/química , Ácidos Nucleicos/aislamiento & purificación , Ácidos Nucleicos/química , Ácidos Nucleicos/análisisRESUMEN
Accurately distinguishing tumor cells from normal cells is a key issue in tumor diagnosis, evaluation, and treatment. Fluorescence-based immunohistochemistry as the standard method faces the inherent challenges of the heterogeneity of tumor cells and the lack of big data analysis of probing images. Here, we have demonstrated a machine learning-driven imaging method for rapid pathological diagnosis of five types of cancers (breast, colon, liver, lung, and stomach) using a perovskite nanocrystal probe. After conducting the bioanalysis of survivin expression in five different cancers, high-efficiency perovskite nanocrystal probes modified with the survivin antibody can recognize the cancer tissue section at the single cell level. The tumor to normal (T/N) ratio is 10.3-fold higher than that of a conventional fluorescent probe, which can successfully differentiate between tumors and adjacent normal tissues within 10 min. The features of the fluorescence intensity and pathological texture morphology have been extracted and analyzed from 1000 fluorescence images by machine learning. The final integrated decision model makes the area under the receiver operating characteristic curve (area under the curve) value of machine learning classification of breast, colon, liver, lung, and stomach above 90% while predicting the tumor organ of 92% of positive patients. This method demonstrates a high T/N ratio probe in the precise diagnosis of multiple cancers, which will be good for improving the accuracy of surgical resection and reducing cancer mortality.