Effect of Surface Wetting Resin on the Color Stability and Microhardness of Esthetic Composites / Efecto de la resina humectante de superficies sobre la estabilidad del color y la microdureza de resinas compuestas estéticas

ABSTRACT: Objective: The aim of this study was to evaluate and compare the effects of the superficial application of two different modeling resins on the surface microhardness and discoloration of composite resins. Material and Methods: The present study used two different composites and modeling resins. The composites were placed in plastic molds. Subsequently, the modeling resins were applied on the surface of the two composite groups. The microhardness and color pertaining to all the groups were evaluated. The current study used the One-Way ANOVA and Kruskal Wallis tests, in order to perform the statistical evaluation (p<0.05). Results: The present study compared the microhardness pertaining to the groups and the highest microhardness values were observed in the Estelite Asteria group (none), whereas the lowest values were observed in the GC Essentia group (Ultradent). Moreover, the current study evaluated the color stability and the greatest discoloration was observed in the control group of the GC Essentia group, whereas the least discoloration was observed in the Estelite Asteria group that included the samples prepared using Ultradent Wetting Resin. Conclusions: The results of the present study demonstrated that the use of modeling resins, which facilitate the placement of composite resins, reduced the microhardness and discoloration of composite resins. The aforementioned effect can be attributed to the variations in the structure of the filling. However, further studies are warranted to support and verify the results of the current study.

RESUMEN: Objetivo: El objetivo del presente estudio fue evaluar y comparar los efectos de la aplicación superficial de dos resinas humectantes sobre la microdureza superficial y la decoloración de las resinas compuestas. Material y métodos: El presente estudio utilizó dos resinas humectantes y resinas de modelado diferentes. Las resinas compuestas se colocaron en moldes de plástico. Posteriormente, se aplicaron las resinas humectantes sobre la superficie de los dos grupos. Se evaluó la microdureza y el color de todos los grupos. El presente estudio utilizó las pruebas One-Way ANOVA y Kruskal Wallis, para realizar la evaluación estadística (p<0.05). Resultados: Los valores más altos de microdureza se observaron en el grupo Estelite Asteria, mientras que los menores valores se observaron en el grupo GC Essentia (Ultradent). La mayor decoloración se observó en el grupo control o el grupo GC Essentia, mientras que la menor decoloración se observó en el grupo Estelite Asteria con Ultradent Wetting Resin. Conclusiones: Los resultados del presente estudio demostraron que el uso de resinas humectantes, que facilitan la colocación de resinas compuestas, redujo la microdureza y decoloración de las resinas compuestas. El efecto mencionado anteriormente se puede atribuir a las variaciones en la estructura del relleno. Sin embargo, se necesitan más estudios para respaldar y verificar los resultados del presente estudio.

Three-dimensional evaluation of maxillary sinus volume in different age and sex groups using CBCT.

AIM: Sinus maxillaris is an important anatomical formation in many branches of dentistry due to its proximity to the field of work. Various methods have been used in literature to measure the maxillary sinus volume (MSV) such as cadavers, stereology, two-dimensional conventional radiographs, computed tomography (CT), magnetic resonance imaging (MRI). The aim of this study is to evaluate the change of maxillary sinus volume according to age and gender with MIMICS 19.0 (Materialise HQ Technologielaan, Leuven, Belgium) which is one of three-dimensional modeling software. MATERIALS AND METHODS: This study was performed in 200 patients selected by a retrospective review of the archives of the Dicle University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology. Patients were divided into five age groups (18-24 years, 25-34 years, 35-44 years, 45-54 years, and ≥ 55 years) and by sex. Cone-beam computed tomography (CBCT) images of the patients were transferred to the MIMICS software and the MSV was measured. All statistical analyses were performed using the SPSS (Statistical Package for Social Sciences, version 21) software. RESULTS: There was no statistically significant difference between the right and left maxillary sinus volume according to the findings obtained from our study, and maxillary sinus volume in males was found to be significantly higher than that of females. Another finding of our study is that the maxillary sinus volume decreases with age increase. Especially it was also found that the sinus volume in males in the 18-24 age group was statistically significantly higher than females. CONCLUSION: Consequently, maxillary sinus volume measurements can be made on CT, CBCT, MRI scans using reconstruction software.

Maxillary Cortical Bone Thickness in a South-Eastern Anatolian Population: A Cone-Beam Computed Tomography Study.

BACKGROUND The aim of this study was to measure the distance between the maxillary premolar and molar teeth apices to the buccal cortical bone and evaluate differences in gender and age group, using cone beam computed tomography (CBCT). MATERIAL AND METHODS This retrospective study comprised of 451 premolar and molar teeth of one hundred and thirteen patients who were admitted to Dicle University, Faculty of Dentistry, Department of Dentomaxillofacial Radiology for different reasons. Data were analyzed using Student's t-tests and Tukey HSD tests. RESULTS There was significant difference in buccal bone thickness by gender (p<0.05). The thinnest point of the maxillary buccal bone was measured in women as 2.11 mm and in men as 2.02 mm in the first premolar teeth. The thickest point of maxillary buccal bone was measured in women as 9.87 mm and in men 10.71 mm palatinal root of the first molar. A comparison of buccal bone thickness between age showed a statistically significant difference at the distobuccal and palatinal roots of the first molar, at the mesiobuccal root of the second molar (p<0.05). CONCLUSIONS The measurements of maxillar buccal bone thickness using CBCT for various dental procedures especially in endodontic surgery, orthodontic mini implant treatment, dental implant procedures, and healing after tooth extraction that are important knowledge.

Effectiveness of ethylenediaminetetraacetic acid (EDTA) and MTAD on debris and smear layer removal using a self-adjusting file.

OBJECTIVE: The aim of this study was to investigate the cleaning ability of a self-adjusting file (SAF) system regarding debris and smear layer removal using ethylenediaminetetraacetic acid (EDTA) or MTAD. STUDY DESIGN: In total, 45 maxillary incisor teeth were randomly divided into 2 different irrigation groups of 20 canals each and a negative control group of 5 canals. The canals in each of the irrigation groups were irrigated using sodium hypochlorite (1.3%) as an initial irrigant during the first 2 minutes of operation, followed by 2 minutes continuous irrigation with either 17% EDTA or MTAD in a closed system. The negative control group was irrigated using 1.3% sodium hypochlorite. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of debris and smear layer in the coronal, middle, and apical thirds of the canal was evaluated using a 5-grade scoring system with ×200 and ×2,000 magnification, respectively. RESULTS: The SAF operation with 2-minute continuous irrigation using MTAD resulted in root canal walls that were free of smear layer in 85%, 70%, and 60% and of debris in 95%, 90%, and 95% of the coronal, middle, and apical thirds of the root canals, respectively. The SAF operation with continuous irrigation using EDTA resulted in root canal walls that were free of smear layer in 85%, 60%, and 50% and of debris in 95%, 90%, and 85% of the coronal, middle, and apical thirds of the root canals, respectively. Teeth in the negative control group were totally covered with debris. Evaluation by SEM showed no significant difference between the tested irrigants in removing the smear layer and debris among the different regions of the root canal. Both groups were significantly different from the negative control group. CONCLUSIONS: When using the SAF, the protocols used in this study were effective for debridement for all regions of the root canal even for the apical thirds.

Deformation of the self-adjusting file on simulated curved root canals: a time-dependent study.

OBJECTIVE: This study examined the surface changes of self-adjusting file after operating in different degrees of canal curvatures with a fixed radius of curvature in different operation intervals. STUDY DESIGN: Artificial canals were manufactured in a 5-mm radius of curvature with 45° and 60° angles of curvature. Forty self-adjusting files were divided into 2 groups and submitted to functional fatigue to failure. Twenty files were tested using the 45° angle and the remaining 20 were tested using the 60° angle at 4 minutes for 7 periods in a total of 28 minutes. The average time frame for each 4-minute inspection period was considered as the moment of failure at 2, 6, 10, 14, 18, 22, and 26 minutes, respectively. Instruments were evaluated using scanning electron microscopy to characterize the material under study. RESULTS: The lattice detachment began at the second period for both groups and continued to increase along with the ongoing testing time. The detachment that occurred in 60° canal curvature was higher at the third and fourth periods when compared with the 45° group (P < .05). For both groups, during the third period, detachment of the arch of the lattice was only one sided; however, this deformation was severe between the fourth and sixth periods with a 2-sided detachment, which was easier to separate. The rough surface became smooth after usage. No full separation of the file was evident for both groups. CONCLUSIONS: In multirooted teeth with severely curved root canals, using more than one self-adjusting file might be recommended to prevent lattice detachment.

Evaluation of radicular dentin erosion and smear layer removal capacity of Self-Adjusting File using different concentrations of sodium hypochlorite as an initial irrigant.

OBJECTIVE: The aim of this study was to evaluate Self-Adjusting File (SAF) in the removal of smear layer and impact on the dentin surface using sodium hypochlorite (NaOCl) as an initial irrigation solution at 3 different concentrations combined with 1% EDTA. In addition, the erosive effect of this dual irrigation regime was examined. STUDY DESIGN: Root canal preparations were performed in 30 teeth using the SAF with a continuous irrigation device (Vatea) in a closed system in which the apical foramen was sealed. The vibration mode was on for 5 minutes during the preparation. Three different concentrations of NaOCl (1.3%, 2.6%, and 5.25%) and 1% EDTA were used for continuous irrigation. The final flush was also performed using NaOCl with the vibration mode on. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of the smear layer was scored using a 5-point scoring system, and the erosive capacity of the irrigants were scored using a 3-point scoring system. RESULTS: The results showed no significant difference in smear layer removal among different concentrations of NaOCl and among the regions. Clean dentin surfaces were observed in 80%, 70%, and 70% with a score of 1 or 2 of the apical thirds using 1.3%, 2.6%, and 5.25% NaOCl, respectively. The 1.3% and 2.6% NaOCl solutions showed similar erosion patterns on the root canal walls (P > .05); however, 5.25% NaOCl caused severe erosion (P < .05). CONCLUSIONS: When using the SAF with continuous irrigation and vibration, lower concentrations of NaOCl and EDTA can be recommended for efficient clinical removal of the smear layer even in the apical thirds and to avoid excessive erosion of root dentin.

Evaluation of ectodermal dysplasia.

This case series report outlines possible cranio-maxillofacial deformation consequences associated with ectodermal dysplasia (ED) and embryonic malformations, including dental agenesis. Also described are the oral aspects and rehabilitation. A total of 14 ED patients (7 males and 7 females, aged 5-45 years) underwent clinical examination before assessment and treatment. Lateral cephalometric radiography, Steiner's analysis, and respiratory capacity tests were performed. Most of the patients had sparse or absent hair, a short face with an unusual facial concavity, a maxillary retrusion, and a relative mandible protrusion. Depending on age and orthopedic abnormalities, patients were treated with prosthodontic and orthodontic approaches or implant treatment. Therapists should take a comprehensive and multidisciplinary approach with these patients to improve their dental, masticatory, growth, and orthognathic conditions, as well as esthetic appearance.