Date palm biochar-polymer composites: An investigation of electrical, mechanical, thermal and rheological characteristics.

The application of biochar (BC) as a filler in polymers can be viewed as a sustainable approach that incorporates pyrolysed waste based value-added material and simultaneously mitigate bio-waste in a smart way. The overarching aim of this work was to investigate the electrical, mechanical, thermal and rheological properties of biocomposite developed by utilizing date palm waste-derived BC for the reinforcing of polypropylene (PP) matrix. Date palm waste derived BC prepared at (700 and 900°C) were blended at different proportions with polypropylene and the resultant composites (BC/PP) were characterized using an array of techniques (scanning electron microscope, energy-dispersive X-ray spectroscopy and Fourier transform infra-red spectroscopy). Additionally the thermal, mechanical, electrical and rheological properties of the BC/PP composites were evaluated at different loading of BC content (from 0 to15% w/w). The mechanical properties of BC/PP composites showed an improvement in the tensile modulus while that of electrical characterization revealed an enhanced electrical conductivity with increased BC loading. Although the BC incorporation into the PP matrix has significantly reduced the total crystallinity of the resulted composites, however; a positive effect on the crystallization temperature (Tc) was observed. The rheological characterization of BC/PP composites revealed that the addition of BC had minimal effect on the storage modulus (G') compared to the neat (PP).

Effect of Span 60 on the Microstructure, Crystallization Kinetics, and Mechanical Properties of Stearic Acid Oleogels: An In-Depth Analysis.

Modulation of crystallization of stearic acid and its derivatives is important for tuning the properties of stearate oleogels. The present study delineates the crystallization of stearic acid in stearate oleogels in the presence of Span 60. Microarchitecture analysis revealed that stearic acid crystals in the oleogels changed its shape from plate-like structure to a branched architecture in the presence of Span 60. Consequently, a significant variation in the mobility of the solute molecules inside the oleogel (Fluorescence recovery after photobleaching studies, FRAP analysis) was observed. Thermal analysis (gelation kinetics and DSC) revealed shortening of nucleation induction time and secondary crystallization with an increase in the Span 60 concentration. Furthermore, isosolid diagram suggested better physical stability of the formulations at higher proportions of Span 60. XRD analysis indicated that there was a decrease in the crystal size and the crystallinity of the stearic acid crystals with an increase in Span 60 concentration in the Span 60 containing oleogels. However, crystal growth orientation was unidirectional and found unaltered with Span 60 concentration (Avarmi analysis using DSC data). The mechanical study indicated a composition-dependent variation in the viscoelastic properties (instantaneous [τ1 ], intermediate [τ2 ], and delayed [τ3 ] relaxation times) of the formulations. In conclusion, Span 60 can be used to alter the kinetics of the crystallization, crystal habit and crystal structure of stearic acid. This study provides a number of clues that could be used further for developing oleogel based formulation.

Thermal, creep-recovery and viscoelastic behavior of high density polyethylene/hydroxyapatite nano particles for bone substitutes: effects of gamma radiation.

BACKGROUND: High Density Polyethylene (HDPE) is one of the most often used polymers in biomedical applications. The limitations of HDPE are its visco-elastic behavior, low modulus and poor bioactivity. To improve HDPE properties, HA nanoparticles can be added to form polymer composite that can be used as alternatives to metals for bone substitutes and orthopaedic implant applications. METHOD: In our previous work (BioMedical Engineering OnLine 2013), different ratios of HDPE/HA nanocomposites were prepared using melt blending in a co-rotating intermeshing twin screw extruder. The accelerated aging effects on the tensile properties and torsional viscoelastic behavior (storage modulus (G') and Loss modulus (G")) at 80°C of irradiated and non-irradiated HDPE/HA was investigated. Also the thermal behavior of HDPE/HA were studied. In this study, the effects of gamma irradiation on the tensile viscoelastic behavior (storage modulus (E') and Loss modulus (E")) at 25°C examined for HDPE/HA nanocomposites at different frequencies using Dynamic Mechanical Analysis (DMA). The DMA was also used to analyze creep-recovery and relaxation properties of the nanocomposites. To analyze the thermal behavior of the HDPE/HA nanocomposite, Differential Scanning Calorimetry (DSC) was used. RESULTS: The microscopic examination of the cryogenically fractured surface revealed a reasonable distribution of HA nanoparticles in the HDPE matrix. The DMA showed that the tensile storage and loss modulus increases with increasing the HA nanoparticles ratio and the test frequency. The creep-recovery behavior improves with increasing the HA nanoparticle content. Finally, the results indicated that the crystallinity, viscoelastic, creep recovery and relaxation behavior of HDPE nanocomposite improved due to gamma irradiation. CONCLUSION: Based on the experimental results, it is found that prepared HDPE nanocomposite properties improved due to the addition of HA nanoparticles and irradiation. So, the prepared HDPE/HA nanocomposite appears to have fairly good comprehensive properties that make it a good candidate as bone substitute.