Enhanced osteogenic differentiation and mineralization of human dental pulp stem cells using Prunus amygdalus amara (bitter almond) incorporated nanofibrous scaffold.

Polyphenol extracts derived from plants are expected to have enhanced osteoblast proliferation and differentiation ability, which has gained much attention in tissue engineering applications. Herein, for the first time, we investigate the effects of Prunus amygdalus amara (bitter almond) (BA) extract loaded on poly (ε-caprolactone) (PCL)/gelatin (Gt) nanofibrous scaffolds on the osteoblast differentiation of human dental pulp stem cells (DPSCs). In this regard, BA (0, 5, 10, and 15% wt)-loaded PCL/Gt nanofibrous scaffolds were prepared by electrospinning with fiber diameters in the range of around 237-276 nm. Morphology, composition, porosity, hydrophilicity, and mechanical properties of the scaffolds were examined by FESEM, ATR-FTIR spectroscopy, BET, contact angle, and tensile tests, respectively. It was found that the addition of BA improved the tensile strength (up to 6.1 times), Young's modulus (up to 3 times), and strain at break (up to 3.2 times) compared to the neat PCL/Gt nanofibers. Evaluations of cell attachment, spreading, and proliferation were done by FESEM observation and MTT assay. Cytocompatibility studies support the biocompatible nature of BA loaded PCL/Gt scaffolds and free BA by demonstrating cell viability of more than 100% in all groups. The results of alkaline phosphatase activity and Alizarin Red assay revealed that osteogenic activity levels of BA loaded PCL/Gt scaffolds and free BA were significantly increased compared to the control group (p < 0.05, p < 0.01, p < 0.001). QRT-PCR results demonstrated that BA loaded PCL/Gt scaffolds and free BA led to a significant increase in osteoblast differentiation of DPSCs through the upregulation of osteogenic related genes compared to the control group (p < 0.05). Based on results, incorporation of BA extract in PCL/Gt scaffolds exhibited synergistic effects on the adhesion, proliferation, and osteogenesis differentiation of hDPSCs and was therefore assumed to be a favorable scaffold for bone tissue engineering applications.

Synthesis, characterization, and evaluation of Hesperetin nanocrystals for regenerative dentistry.

Hesperetin (HS), a metabolite of hesperidin, is a polyphenolic component of citrus fruits. This ingredient has a potential role in bone strength and the osteogenic differentiation. The bone loss in the orofacial region may occur due to the inflammation response of host tissues. Nanotechnology applications have been harshly entered the field of regenerative medicine to improve the efficacy of the materials and substances. In the current study, the hesperetin nanocrystals were synthesized and characterized. Then, the anti-inflammatory and antioxidative effects of these nanocrystals were evaluated on inflamed human Dental Pulp Stem Cells (hDPSCs) and monocytes (U937). Moreover, the osteoinduction capacity of these nanocrystals was assessed by gene and protein expression levels of osteogenic specific markers including RUNX2, ALP, OCN, Col1a1, and BSP in hDPSCs. The deposition of calcium nodules in the presence of hesperetin and hesperetin nanocrystals was also assessed. The results revealed the successful fabrication of hesperetin nanocrystals with an average size of 100 nm. The levels of TNF, IL6, and reactive oxygen species (ROS) in inflamed hDPSCs and U937 significantly decreased in the presence of hesperetin nanocrystals. Furthermore, these nanocrystals induced osteogenic differentiation in hDPSCs. These results demonstrated the positive and effective role of fabricated nanocrystal forms of this natural ingredient for regenerative medicine purposes.

Cell homing strategy as a promising approach to the vitality of pulp-dentin complexes in endodontic therapy: focus on potential biomaterials.

INTRODUCTION: Over the last two decades, an increasing body of research suggests that well-designed biomaterials can attract resident stem cells to injured areas and control their behaviors and activities to encourage tissue regeneration. Fabricated biomaterials can enhance cell recruitment, multiplication, and transformation while also acting as a delivery system for targeted cells. These capabilities might play a role in their ability to promote tooth regeneration. AREAS COVERED: This review aims to introduce the various materials used in endodontics. The potential of biomaterial-based approaches involved in cell homing for endodontics is also discussed. EXPERT OPINION: Applying the cell homing technique in restorative dentistry can affect various aspects of healthcare, industry, economy, and science. Biomaterial scaffolds can be used to encapsulate cells or for structural replacements. Also, both cell transplantation and cell homing are legitimate scientific procedures in endodontic therapy. Although the suggested biomaterials and procedures may hold promise for future dental pulp tissue regeneration, tooth structure's complexity and multicellular interconnections lead to significant problems that need to be overcome before any clinical trial.

Towards Induction of Angiogenesis in Dental Pulp Stem Cells Using Chitosan-Based Hydrogels Releasing Basic Fibroblast Growth Factor.

INTRODUCTION: Chitosan is a natural biopolymer that attracted enormous attention in biomedical fields. The main components of regenerative endodontic procedures (REPs), as well as tissue engineering, are scaffolds, stem cells, and growth factors. As one of the basic factors in the REPs is maintaining vascularization, this study was aimed at developing basic fibroblast growth factor- (bFGF-) loaded scaffolds and investigating their effects on the angiogenic induction in human dental pulp stem cells (hDPSCs). METHODS: Poly (ε-caprolactone) (PCL)/chitosan- (CS-) based highly porous scaffold (PCL/CS) was prepared and evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analyses. The adhesion and survival potency of seeded cells were assessed by SEM and MTT assays, respectively. The amount of angiogenic markers was investigated in gene and protein levels by real-time PCR and western blotting assays, respectively. RESULTS: Based on our findings, the SEM and FTIR tests confirmed the appropriate structure of synthesized scaffolds. Besides, the adhesion and survival rate of cells and the levels of VEGFR-2, Tie2, and Angiopoietin-1 genes were increased significantly in the PCL/CS/bFGF group. Also, the western blotting results showed the upregulation of these markers at protein levels, which were considerably higher at the PCL/CS/bFGF group (P < 0.05). CONCLUSIONS: On a more general note, this study demonstrates that the bFGF-loaded PCL/CS scaffolds have the potential to promote angiogenesis of hDPSCs, which could provide vitality of dentin-pulp complex as the initial required factor for regenerative endodontic procedures.

Curcumin nanoformulations: Beneficial nanomedicine against cancer.

Curcumin is a phytochemical achieved from the plant turmeric. It is extensively utilized for the treatment of several types of diseases such as cancers. Nevertheless, its efficiency has been limited because of rapid metabolism, low bioavailability, poor water solubility, and systemic elimination. Scientists have tried to solve these problems by exploring novel drug delivery systems such as lipid-based nanoparticles (NPs) (e.g., solid lipid NPs, nanostructured lipid carriers, and liposomes), polymeric NPs, micelles, nanogels, cyclodextrin, gold, and mesoporous silica NPs. Among these, liposomes have been the most expansively studied. This review mainly focuses on the different curcumin nanoformulations and their use in cancer therapy in vitro, in vivo, and clinical studies. Despite the development of curcumin-containing NPs for the treatment of cancer, potentially serious side effects, including interactions with other drugs, some toxicity aspects of NPs may occur that require more high-quality investigations to firmly establish the clinical efficacy.

Application of Collagen and Mesenchymal Stem Cells in Regenerative Dentistry.

Collagen is an important macromolecule of Extracellular Matrix (ECM) in bones, teeth, and temporomandibular joints. Mesenchymal Stem Cells (MSCs) interact with the components of the ECM such as collagen, proteoglycans, Glycosaminoglycans (GAGs), and several proteins on behalf of variable matrix elasticity and bioactive cues. Synthetic collagen-based biomaterials could be effective scaffolds for regenerative dentistry applications due to mimicking of host tissues' ECM. These biomaterials are biocompatible, biodegradable, readily available, and non-toxic to cells whose capability promotes cellular response and wound healing in the craniofacial region. Collagen could incorporate other biomolecules to induce mineralization in calcified tissues like bone and tooth. Moreover, the addition of these molecules or other polymers to collagen-based biomaterials could enhance mechanical properties, which is important in load-bearing areas such as the mandible. A literature review was performed via a reliable internet database (mainly PubMed) based on MeSH keywords. This review first describes the properties of collagen as a key protein in the structure of hard tissues. Then, it introduces different types of collagens, the correlation between collagen and MSCs, and the methods used to modify collagen in regenerative dentistry, including recent progression on the regeneration of periodontium, dentin-pulp complex, and temporomandibular joint by applying collagen. The prospects and challenges of collagen-based biomaterials in the craniofacial region are pointd out.

Overexpression Effects of miR-424 and BMP2 on the Osteogenesis of Wharton's Jelly-Derived Stem Cells.

Recently, the translational application of noncoding RNAs is accelerated dramatically. In this regard, discovering therapeutic roles of microRNAs by developing synthetic RNA and vector-based RNA is attracting attention. Here, we studied the effect of BMP2 and miR-424 on the osteogenesis of Wharton's jelly-derived stem cells (WJSCs). For this purpose, human BMP2 and miR-424 DNA codes were cloned in the third generation of lentiviral vectors and then used for HEK-293T cell transfection. Lentiviral plasmids contained miR424, BMP-2, miR424-BMP2, green fluorescent protein (GFP) genes, and helper vectors. The recombinant lentiviral particles transduced the WJSCs, and the osteogenesis was evaluated by real-time PCR, Western blot, Alizarin Red staining, and alkaline phosphatase enzyme activity. According to the results, there was a significant increase in the expression of the BMP2 gene and secretion of Osteocalcin protein in the group of miR424-BMP2. Moreover, the amount of dye deposition in Alizarin Red staining and alkaline phosphatase activity was significantly higher in the mentioned group (p < 0.05). Thus, the current study results clarify the efficacy of gene therapy by miR424-BMP2 vectors for bone tissue engineering. These data could help guide the development of gene therapy-based protocols for bone tissue engineering.

Targeting Mitochondrial Biogenesis with Polyphenol Compounds.

Appropriate mitochondrial physiology is an essential for health and survival. Cells have developed unique mechanisms to adapt to stress circumstances and changes in metabolic demands, by meditating mitochondrial function and number. In this context, sufficient mitochondrial biogenesis is necessary for efficient cell function and haemostasis, which is dependent on the regulation of ATP generation and maintenance of mitochondrial DNA (mtDNA). These procedures play a primary role in the processes of inflammation, aging, cancer, metabolic diseases, and neurodegeneration. Polyphenols have been considered as the main components of plants, fruits, and natural extracts with proven therapeutic effects during the time. These components regulate the intracellular pathways of mitochondrial biogenesis. Therefore, the current review is aimed at representing an updated review which determines the effects of different natural polyphenol compounds from various plant kingdoms on modulating signaling pathways of mitochondrial biogenesis that could be a promising alternative for the treatment of several disorders.

Synthesis, characterization, and evaluation of curcumin-loaded endodontic reparative material.

Curcumin (CUR) is an ancient therapeutic agent with remarkable antimicrobial and anti-inflammatory properties. The purpose of the current study was to synthesize and evaluate a curcumin-based reparative endodontic material to reduce infection and inflammation besides the induction of mineralization during the healing of the dentin-pulp complex. Poly-ɛ-caprolactone (PCL)/gelatin (Gel)/CUR scaffold was synthesized and assessed by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermo-gravimetric analysis (TGA). Agar diffusion test was performed against E. coli, A. baumannii, P. aeruginosa, S. aureus, E. faecalis, and S. mutans. Moreover, proliferative, antioxidative, anti-inflammatory, and calcification properties of these scaffolds on human dental pulp stem cells (hDPSCs) were evaluated. The results showed that PCL/Gel/CUR scaffold had antibacterial effects. Also, these CUR-based scaffolds had significant inhibitory effects on the expression of tumor necrosis factor α and DCF from inflamed hDPSCs (p < 0.05). Moreover, the induction of mineralization in hDPSCs significantly increased after seeding on CUR-based scaffolds (p < 0.05). Based on these findings, the investigated CUR-loaded material was fabricated successfully and provided an appropriate structure for the attachment and proliferation of hDPSCs. It was found that these scaffolds had antimicrobial, antioxidant, and anti-inflammatory characteristics and could induce mineralization in hDPSCs, which is essential for healing and repairing the injured dentin-pulp complex.

In vivo evaluation of biocompatibility and immune modulation potential of poly(caprolactone)-poly(ethylene glycol)-poly(caprolactone)-gelatin hydrogels enriched with nano-hydroxyapatite in the model of mouse.

Biocompatible, biodegradable, and injectable hydrogels are a novel and promising approach for bone regeneration. In this study, poly(caprolactone)-poly(ethylene glycol)-poly(caprolactone) (PCL-PEG-PCL), PCL-PEG-PCL-gelatin (Gel), PCL-PEG-PCL-Gel/nano-hydroxyapatite (nHA) injectable hydrogels were synthesized and evaluated in a mouse model of subcutaneous transplantation after 14 days. PCL-PEG-PCL-Gel and PCL-PEG-PCL-Gel/nHA hydrogels were fabricated with in situ precipitation method. Structure, intermolecular interaction, and the reaction between the PCL-PEG-PCL, Gel, and nHA were evaluated using a scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (H-NMR), and carbon nuclear magnetic resonance (C-NMR). Fourteen days after subcutaneous injection, the existence of an immune system reaction was investigated using Hematoxylin and Eosin (H&E) staining. Using immunofluorescence imaging, the number of CD68+ cells was determined in the periphery of the hydrogel. The CD8/CD4 lymphocyte ratio was also calculated in blood samples. We monitored the expression of CCL-2, BCL-2, IL-10, and CD31 using real-time PCR assay. The chemical evaluation revealed the successful integration of Gel and nHA to the PCL-PEG-PCL backbone. Histological examination showed the lack of inflammation at the site of injection. No toxicological effects were determined in hepatic and renal tissues. The addition of nHA to the PCL-PEG-PCL-Gel decreased biodegradation time. None of the hydrogels caused statistically significant differences in the number of CD68 cells (p > 0.05). The CD8/CD4 lymphocyte ratio remained unchanged in all groups (p > 0.05). Compared to the PCL-PEG-PCL group, the addition of nHA and Gel increased the expression of CCL-2, BCL-2, IL-10, and CD31 (p < 0.05). In conclusion, the current study showed that PCL-PEG-PCL-Gel/nHA hydrogels could be used in in vivo conditions without prominent toxic effects and inflammatory responses.

Clinical and Demographical Characteristics of Cleft Lip and/or Palate in the Northwest of Iran: An Analysis of 1500 Patients.

OBJECTIVE: Orofacial clefts (OFCs) can occur as an isolated defect or as a manifestation of other syndromes. The current study aimed to evaluate demographic characteristics and distribution of different types of accompanying anomalies for OFCs in the northwest of Iran. DESIGN: A retrospective cohort study. SETTING: Tertiary pediatric hospital. PATIENTS AND PARTICIPANTS: This study was conducted on 1500 cleft lip and/or palate patients born between July 2010 and June 2020 in the northwest of Iran. MAIN OUTCOME MEASURES: Demographic and clinical characteristics of the children with OFCs including familial history, accompanying anomalies and syndromes, maternal passive smoking, mothers' and fathers' age, consanguineous marriage, and birth order. RESULTS: Among 1500 patients, 441 had cleft lip, 615 had cleft palate, and 444 had cleft lip and palate. The positive family history of OFCs was found to be 20.9% to 25.4% depending on the cleft type. Accompanying anomalies were identified in 29.8% of cases. Cardiac, facial, and ear abnormalities were the most common types. Also, 2.9% were identified with syndromes and sequences. These included Pierre Robin Sequence, Velo-cardio-facial syndrome, and Down syndrome most frequently. CONCLUSION: These findings may provide references for appropriate resources to establish and direct counseling and primary preventive projects in the northwest of Iran.