Monitoring of total potassium in winemaking processes using a potentiometric analytical microsystem.

Innovation in products and processes, traceability, food security and quality control are inherent challenges in agri-food sector. Trends in wine production are focused on obtaining natural wines with less chemical intervention. Following this goal, a low cost miniaturized, easy-to-use and highly automated microanalyzer to monitor total potassium in winemaking processes is presented. The microsystem monolithically integrates microfluidics as well as a potentiometric detection system and does not require any sample pretreatment. The analytical features provided are a linear range from 250 to 4000 mg L-1 K+, covering all the concentrations expected in must and wine samples, a detection limit of 75 ± 12 mg L-1 K+, and an adequate reproducibility and repeatability. Sample throughput is calculated at 20 h-1 with a waste volume generation lower than 4 mL per analysis. The microsystem lifetime is at least 4 months. Different wine and grape juice samples have been analyzed reaching outstanding results.

Multi-parametric polymer-based potentiometric analytical microsystem for future manned space missions.

The construction and evaluation of a Cyclic Olefin Copolymer (COC)-based continuous flow potentiometric microanalyzer to simultaneously monitor potassium, chloride and nitrate ions in samples from an on-board water recycling process expected to be installed in future manned space missions is presented. The main goals accomplished in this work address the specific required characteristics for a miniaturized on-line monitoring system to control water quality in such missions. To begin with, the integration of three ion-selective electrodes (ISEs) and a reference electrode in a compact microfluidic platform that incorporates a simple automatic autocalibration process allows obtaining information about the concentration of the three ions with optimal analytical response characteristics, but moreover with low reagents consumption and therefore with few waste generation, which is critical for this specific application. By a simple signal processing (signal removal) the chloride ion interference on the nitrate electrode response can be eliminated. Furthermore, all fluidics management is performed by computer-controlled microvalves and micropumps, so no manual intervention of the crew is necessary. The analytical features provided by the microsystem after the optimization process were a linear range from 6.3 to 630 mg L-1 and a detection limit of 0.51 mg L-1 for the potassium electrode, a linear range from 10 to 1000 mg L-1 and a detection limit of 1.58 mg L-1 for the chloride electrode and a linear range from 10 to 1000 mg L-1 and a detection limit of 3.37 mg L-1 for the nitrate electrode with a reproducibility (RSD) of 4%, 2% and 3% respectively. Sample throughput was 12 h-1 with a reagent consumptions lower than 2 mL per analysis.

Potentiometric analytical microsystem based on the integration of a gas-diffusion step for on-line ammonium determination in water recycling processes in manned space missions.

The design, construction and evaluation of a versatile cyclic olefin copolymer (COC)-based continuous flow potentiometric microanalyzer to monitor the presence of ammonium ion in recycling water processes for future manned space missions is presented. The microsystem integrates microfluidics, a gas-diffusion module and a detection system in a single substrate. The gas-diffusion module was integrated by a hydrophobic polyvinylidene fluoride (PVDF) membrane. The potentiometric detection system is based on an all-solid state ammonium selective electrode and a screen-printed Ag/AgCl reference electrode. The analytical features provided by the analytical microsystem after the optimization process were a linear range from 0.15 to 500 mg L(-1) and a detection limit of 0.07 ± 0.01 mg L(-1). Nevertheless, the operational features can be easily adapted to other applications through the modification of the hydrodynamic variables of the microfluidic platform.

Gas diffusion as a new fluidic unit operation for centrifugal microfluidic platforms.

A centrifugal microfluidic platform prototype with an integrated membrane for gas diffusion is presented for the first time. The centrifugal platform allows multiple and parallel analysis on a single disk and integrates at least ten independent microfluidic subunits, which allow both calibration and sample determination. It is constructed with a polymeric substrate material and it is designed to perform colorimetric determinations by the use of a simple miniaturized optical detection system. The determination of three different analytes, sulfur dioxide, nitrite and carbon dioxide, is carried out as a proof of concept of a versatile microfluidic system for the determination of analytes which involve a gas diffusion separation step during the analytical procedure.