Rapid Identification and Analysis of Ochratoxin-A in Food and Agricultural Soil Samples Using a Novel Semi-Automated In-Syringe Based Fast Mycotoxin Extraction (FaMEx) Technique Coupled with UHPLC-MS/MS.

In this work, a fast mycotoxin extraction (FaMEx) technique was developed for the rapid identification and quantification of carcinogenic ochratoxin-A (OTA) in food (coffee and tea) and agricultural soil samples using ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) detection. The FaMEx technique advancement is based on two plastic syringes integrated setup for rapid extraction and its subsequent controlled clean-up process. In the extraction process, a 0.25-g sample and extraction solvent were added to the first syringe barrel for the vortex-based extraction. Then, the extraction syringe was connected to a clean-up syringe (pre-packed with C18, activated carbon, and MgSO4) with a syringe filter. Afterward, the whole set-up was placed in an automated programmable mechanical set-up for controlled elution. To enhance FaMEx technology performance, the various influencing sample pretreatment parameters were optimized. Furthermore, the developed FaMEx method indicated excellent linearity (0.9998 and 0.9996 for coffee/tea and soil) with highly sensitive detection (0.30 and 0.29 ng/mL for coffee/tea and soil) and quantification limits (1.0 and 0.96 for coffee/tea and soil), which is lower than the toxicity limit compliant with the European Union regulation for OTA (5 ng/g). The method showed acceptable relative recovery (84.48 to 100.59%) with <7.34% of relative standard deviation for evaluated real samples, and the matrix effects were calculated as <-13.77% for coffee/tea and -9.7 for soil samples. The obtained results revealed that the developed semi-automated FaMEx/UHPLC-MS/MS technique is easy, fast, low-cost, sensitive, and precise for mycotoxin detection in food and environmental samples.

A low-cost eco-friendly fast drug extraction (FaDEx) technique for environmental and bio-monitoring of psychoactive drug in urban water and sports-persons' urine samples.

Nicotine is the most prominent psychoactive/addictive chemical substance consumed worldwide among young players in team sports. Moreover, urinary nicotine discharge and nicotine-based products disposal in environmental waters has been unavoidable in recent years. Therefore, sensitive monitoring of nicotine content in environmental waters and human urine samples is essential. In this study, we developed a miniaturized novel green, low-cost, sensitive, in-syringe-based semi-automated fast drug extraction (FaDEx) protocol coupled with gas chromatography-flame ionization detection (GC-FID) for the efficient environmental and bio-monitoring of nicotine in aqueous samples. The FaDEx method consists of two steps; firstly, the target analyte was extracted using dimethyl carbonate (a green solvent) and extraction salts. After that, the extraction solvent was passed automatically through the solid-phase extraction cartridge at a constant flow rate for the cleanup process to achieve the sensitive nicotine analysis by GC-FID. Under optimized experimental conditions, the developed method showed excellent linearity over the concentration ranges between 20-2000 ng mL-1 with a correlation coefficient >0.99. The detection and quantification limits were 4 and 20 ng mL-1, respectively. The presented method was applied to monitor and assess nicotine exposure in sports-persons' urine and environmental water samples. The method accuracy and precision in terms of relative recovery and relative standard deviation (for triplicate analysis) were 85.4-110.2% and ≤8%, respectively. Finally, the impact of our procedure on the environment from a green analytical chemistry view was assessed using a novel metric system called AGREE, and obtained the greenness score of 0.87, indicating its an efficient alternative green analytical protocol for routine environmental and bio-monitoring of nicotine in environmental and biological samples.

Novel fast pesticides extraction (FaPEx) strategy coupled with UHPLC-MS/MS for rapid monitoring of emerging pollutant fipronil and its metabolite in food and environmental samples.

In this work, we demonstrated a new, environmental-friendly and effective sample preparation strategy named 'in-syringe-assisted fast pesticides extraction (FaPEx)' technique coupled with LC-MS/MS for the rapid identification and monitoring of emerging pollutant fipronil and its metabolite fipronil sulfone in chicken egg and environmental soil samples. FaPEx strategy comprising of two simple steps. Firstly, the sample was placed in the syringe and extracted using low-volume acetonitrile with NaCl and anhydrous MgSO4 salts. Secondly, the extractant was passed through in-syringe-based solid-phase extraction (SPE) kit containing cleanup sorbents and salt combinations (C18, primary secondary amine, and anhydrous MgSO4) for the cleanup process. Then, the obtained clean extractant was injected into LC-MS/MS for the quantification of target analytes. Various important parameters influencing the FaPEx performances, such as solvent type, salt type, salt amount, sorbent type, and amount, were examined and optimized. The method validation results showed excellent linearity with high correlation coefficients were ≥ 0.99. The estimated LODs were between 0.05-0.07 µg/kg, and LOQs ranged between 0.1-0.25 µg/kg for target analytes in both egg and soil sample matrices, and precision values were ≤7.90%. The developed method was applied to commercial chicken egg samples and environmental soil samples analysis. Spiked recoveries ranged between 88.75-110.91% for egg samples with RSDs ≤7.42% and 82.47-107.46% for soil samples with RSDs <7.37%. These results proved that the developed sample preparation method is a simple, fast, green, low-cost, and efficient method for the analysis of fipronil and its metabolites in food and environmental samples. Thus, this method can be applied as an alternative analytical methodology in routine and standard food and environmental testing laboratories.

Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications.

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.

Evaluation of relative importance of ultrasound reactor parameters for the removal of estrogen hormones in water.

The growing interest in sonochemistry as a tool for environmental remediation leads to the need for process optimization. Sonochemistry is a complex process, which depends on physical parameters and also on the process conditions. Physical parameters are interrelated and therefore a systematic approach has to be taken to optimize the process. The effect of physical parameters on the destruction of seven estrogen hormones (17α-estradiol, 17ß-estradiol, estriol, 17α-ethinylestradiol, 17α-dihydroequilin, estrone and equilin) is reported in this study. Artificial neural networks (ANN) was used as a tool to identify the correlations between these process parameters. ANN enabled the establishment of relationship between sonication parameters such as power density, power intensity, ultrasound amplitude, as well as the reactor design parameters. The major significance was attributed to the area-specific power density and the volume-specific power intensity. The results of this work provide a sound basis to design pilot and full-scale ultrasound treatment systems. Process optimization lead to a 5-fold decrease in energy consumption as compared to the commercially available reactors, thereby making the process attractive for field applications.

Occurrence of estrogen hormones in biosolids, animal manure and mushroom compost.

The presence of natural estrogen hormones as trace concentrations in the environment has been reported by many researchers and is of growing concern due to its possible adverse effects on the ecosystem. In this study, municipal biosolids, poultry manure (PM) and cow manure (CM), and spent mushroom compost (SMC) were analyzed for the presence of seven estrogen hormones. 17α-estradiol, 17ß-estradiol, 17α-dihydroequilin, and estrone were detected in the sampled biosolids and manures at concentrations ranging from 6 to 462 ng/g of dry solids. 17α-estradiol, 17ß-estradiol, and estrone were also detected in SMC at concentrations ranging from 4 to 28 ng/g of dry solids. Desorption experiments were simulated in the laboratory using deionized water (milli-Q), and the aqueous phase was examined for the presence of estrogen hormones to determine their desorption potential. Very low desorption of 0.4% and 0.2% estrogen hormones was observed from municipal biosolids and SMC, respectively. An estimate of total estrogen contribution from different solid waste sources is reported. Animal manures (PM and CM) contribute to a significant load of estrogen hormones in the natural environment.