RESUMO
Treatment of bone defects resulting after tumor surgeries, accidents, or non-unions is an actual problem linked to morbidity and the necessity of a second surgery and often requires a critical healthcare cost. Although the surgical technique has changed in a modern way, the treatment outcome is still influenced by patient age, localization of the bone defect, associated comorbidities, the surgeon approach, and systemic disorders. Three-dimensional magnesium-based scaffolds are considered an important step because they can have precise bone defect geometry, high porosity grade, anatomical pore shape, and mechanical properties close to the human bone. In addition, magnesium has been proven in in vitro and in vivo studies to influence bone regeneration and new blood vessel formation positively. In this review paper, we describe the magnesium alloy's effect on bone regenerative processes, starting with a short description of magnesium's role in the bone healing process, host immune response modulation, and finishing with the primary biological mechanism of magnesium ions in angiogenesis and osteogenesis by presenting a detailed analysis based on a literature review. A strategy that must be followed when a patient-adapted scaffold dedicated to bone tissue engineering is proposed and the main fabrication technologies are combined, in some cases with artificial intelligence for Mg alloy scaffolds, are presented with examples. We emphasized the microstructure, mechanical properties, corrosion behavior, and biocompatibility of each study and made a basis for the researchers who want to start to apply the regenerative potential of magnesium-based scaffolds in clinical practice. Challenges, future directions, and special potential clinical applications such as osteosarcoma and persistent infection treatment are present at the end of our review paper.
RESUMO
BACKGROUND: Coronary artery bypass grafting has evolved from all venous grafts to bilateral mammary artery (BIMA) grafting. This was possible due to the long-term patency of the left and right internal mammary demonstrated in angiography studies compared to venous grafts. However, despite higher survival rates when using bilateral mammary arteries, multiple studies report a higher rate of surgical site infections, most notably deep sternal wound infections, a so-called "never event". METHODS: We designed a prospective study between 1 January 2022 and 31 December 2022 and included all patients proposed for total arterial myocardial revascularization in order to investigate the rate of surgical site infections (SSI). Chest closure in all patients was performed using a three-step protocol. The first step refers to sternal closure. If the patient's BMI is below 35 kg/m2, sternal closure is achieved using the "butterfly" technique with standard steel wires. If the patient's BMI exceeds 35 kg/m2, we use nitinol clips or hybrid wire cable ties according to the surgeon's preference for sternal closure. The main advantages of these systems are a larger implant-to-bone contact with a reduced risk of bone fracture. The second step refers to presternal fat closure with two resorbable monofilament sutures in a way that the edges of the skin perfectly align at the end. The third step is skin closure combined with negative pressure wound therapy. RESULTS: This system was applied to 217 patients. A total of 197 patients had bilateral mammary artery grafts. We report only 13 (5.9%) superficial SSI and only one (0.46%) deep SSI. The preoperative risk of major wound infection was 3.9 +/- 2.7. Bilateral mammary artery grafting was not associated with surgical site infection in a univariate analysis. CONCLUSIONS: We believe this strategy of sternal wound closure can reduce the incidence of deep surgical site infection when two mammary arteries are used in coronary artery bypass surgery.
RESUMO
Uncontrollable bleeding continues to stand as the primary cause of fatalities globally following surgical procedures, traumatic incidents, disasters, and combat scenarios. The swift and efficient management of bleeding through the application of hemostatic agents has the potential to significantly reduce associated mortality rates. One significant drawback of currently available hemostatic products is their susceptibility to bacterial infections at the bleeding site. As this is a prevalent issue that can potentially delay or compromise the healing process, there is an urgent demand for hemostatic agents with antibacterial properties to enhance survival rates. To mitigate the risk of infection at the site of a lesion, we propose an alternative solution in the form of a chitosan-based sponge and antimicrobial agents such as silver nanoparticles (AgNPs) and lavender essential oil (LEO). The aim of this work is to provide a new type of hemostatic sponge with an antibacterial barrier against a wide range of Gram-positive and Gram-negative microorganisms: Staphylococcus epidermidis 2018 and Enterococcus faecalis VRE 2566 (Gram-positive strains) and Klebsiella pneumoniae ATCC 10031 and Escherichia coli ATCC 35218 (Gram-negative strains).
Assuntos
Quitosana , Hemostáticos , Nanopartículas Metálicas , Quitosana/farmacologia , Hemostáticos/farmacologia , Prata , Antibacterianos/farmacologia , Testes de Sensibilidade MicrobianaRESUMO
Pancreatic heterotopy is a rare entity defined as the presence of abnormally located pancreatic tissue without any anatomical or vascular connection to the normal pancreas. Heterotopic pancreatic tissue can be found in various regions of the digestive system, such as the stomach, duodenum, and upper jejunum, with the less commonly reported location being the gallbladder. Gallbladder pancreatic heterotopia can be either an incidental finding or diagnosed in association with cholecystitis. Pancreatitis of the ectopic tissue has also been described. In this context, we report three cases of heterotopic pancreatic tissue in the gallbladder with different types of pancreatic tissue according to the Heinrich classification. One patient was a 24-year-old male who presented with acute pancreatitis symptoms and an ultrasonographical detected mass in the gallbladder, which proved to be heterotopic pancreatic tissue. The other two cases were female patients aged 24 and 32, respectively, incidentally diagnosed on histopathological examination after cholecystectomy for symptomatic cholelithiasis. Both cases displayed chronic cholecystitis lesions; one of them was also associated with low grade dysplasia of the gallbladder. Although a rare occurrence in general, pancreatic heterotopia should be acknowledged as a possible incidental finding in asymptomatic patients as well as a cause for acute cholecystitis or pancreatitis.
Assuntos
Colecistite , Coristoma , Pancreatite , Masculino , Humanos , Feminino , Adulto Jovem , Adulto , Doença Aguda , Pancreatite/diagnóstico por imagem , Pancreatite/cirurgia , Colecistite/diagnóstico por imagem , Colecistite/cirurgia , Coristoma/diagnóstico por imagem , Coristoma/cirurgia , Diagnóstico por ImagemRESUMO
Hemorrhage is a detrimental event present in traumatic injury, surgery, and disorders of bleeding that can become life-threatening if not properly managed. Moreover, uncontrolled bleeding can complicate surgical interventions, altering the outcome of surgical procedures. Therefore, to reduce the risk of complications and decrease the risk of morbidity and mortality associated with hemorrhage, it is necessary to use an effective hemostatic agent that ensures the immediate control of bleeding. In recent years, there have been increasingly rapid advances in developing a novel generation of biomaterials with hemostatic properties. Nowadays, a wide array of topical hemostatic agents is available, including chitosan-based biomaterials that have shown outstanding properties such as antibacterial, antifungal, hemostatic, and analgesic activity in addition to their biocompatibility, biodegradability, and wound-healing effects. This review provides an analysis of chitosan-based hemostatic biomaterials and discusses the progress made in their performance, mechanism of action, efficacy, cost, and safety in recent years.
Assuntos
Quitosana , Hemostáticos , Humanos , Hemostáticos/farmacologia , Hemostáticos/uso terapêutico , Quitosana/farmacologia , Quitosana/uso terapêutico , Materiais Biocompatíveis/farmacologia , Materiais Biocompatíveis/uso terapêutico , Hemostasia , Hemorragia/tratamento farmacológico , Hemorragia/prevenção & controleRESUMO
Bone defects characterized by limited regenerative properties are considered a priority in surgical practice, as they are associated with reduced quality of life and high costs. In bone tissue engineering, different types of scaffolds are used. These implants represent structures with well-established properties that play an important role as delivery vectors or cellular systems for cells, growth factors, bioactive molecules, chemical compounds, and drugs. The scaffold must provide a microenvironment with increased regenerative potential at the damage site. Magnetic nanoparticles are linked to an intrinsic magnetic field, and when they are incorporated into biomimetic scaffold structures, they can sustain osteoconduction, osteoinduction, and angiogenesis. Some studies have shown that combining ferromagnetic or superparamagnetic nanoparticles and external stimuli such as an electromagnetic field or laser light can enhance osteogenesis and angiogenesis and even lead to cancer cell death. These therapies are based on in vitro and in vivo studies and could be included in clinical trials for large bone defect regeneration and cancer treatments in the near future. We highlight the scaffolds' main attributes and focus on natural and synthetic polymeric biomaterials combined with magnetic nanoparticles and their production methods. Then, we underline the structural and morphological aspects of the magnetic scaffolds and their mechanical, thermal, and magnetic properties. Great attention is devoted to the magnetic field effects on bone cells, biocompatibility, and osteogenic impact of the polymeric scaffolds reinforced with magnetic nanoparticles. We explain the biological processes activated due to magnetic particles' presence and underline their possible toxic effects. We present some studies regarding animal tests and potential clinical applications of magnetic polymeric scaffolds.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Animais , Engenharia Tecidual/métodos , Alicerces Teciduais/química , Biomimética , Qualidade de Vida , Osteogênese , Regeneração Óssea , Fenômenos MagnéticosRESUMO
Magnesium alloys are considered one of the most promising materials for biodegradable trauma implants because they promote bone healing and exhibit adequate mechanical strength during their biodegradation in relation to the bone healing process. Surface modification of biodegradable magnesium alloys is an important research field that is analyzed in many publications as the biodegradation due to the corrosion process and the interface with human tissue is improved. The aim of the current preliminary study is to develop a polymeric-based composite coating on biodegradable magnesium alloys by the solvent evaporation method to reduce the biodegradation rate much more than in the case of simple polymeric coatings by involving some bioactive filler in the form of particles consisting of hydroxyapatite and magnesium. Various techniques such as SEM coupled with EDS, FTIR, and RAMAN spectroscopy, and contact angle were used for the structural and morphological characterization of the coatings. In addition, thermogravimetric analysis (TGA) was used to study the effect of filler particles on polymer thermostability. In vitro cytotoxicity assays were performed on MG-63 cells (human osteosarcomas). The experimental analysis highlights the positive effect of magnesium and hydroxyapatite particles as filler for cellulose acetate when they are used alone from biocompatibility and surface analysis points of view, and it is not recommended to use both types of particles (hydroxyapatite and magnesium) as hybrid filling. In future studies focused on implantation testing, we will use only CA-based composite coatings with one filler on magnesium alloys because these composite coatings have shown better results from the in vitro testing point of view for future potential orthopedic biodegradable implants for trauma.
RESUMO
Monitoring changes in edema-associated intracranial pressure that complicates trauma or surgery would lead to improved outcomes. Implantable pressure sensors have been explored, but these sensors require post-surgical removal, leading to the risk of injury to brain tissue. The use of biodegradable implantable sensors would help to eliminate this risk. Here, we demonstrate a bioactive glass (BaG)-based hydration sensor. Fluorine (CaF2) containing BaG (BaG-F) was produced by adding 5, 10 or 20 wt.% of CaF2 to a BaG matrix using a melting manufacturing technique. The structure, morphology and electrical properties of the resulting constructs were evaluated to understand the physical and electrical behaviors of this BaG-based sensor. Synthesis process for the production of the BaG-F-based sensor was validated by assessing the structural and electrical properties. The structure was observed to be amorphous and dense, the porosity decreased and grain size increased with increasing CaF2 content in the BaG matrix. We demonstrated that this BaG-F chemical composition is highly sensitive to hydration, and that the electrical sensitivity (resistive-capacitive) is induced by hydration and reversed by dehydration. These properties make BaG-F suitable for use as a humidity sensor to monitor brain edema and, consequently, provide an alert for increased intracranial pressure.
RESUMO
Additive manufacturing (AM) is an important technology that led to a high evolution in the manufacture of personalized implants adapted to the anatomical requirements of patients. Due to a worldwide graft shortage, synthetic scaffolds must be developed. Regarding this aspect, biodegradable materials such as magnesium and its alloys are a possible solution because the second surgery for implant removal is eliminated. Magnesium (Mg) exhibits mechanical properties, which are similar to human bone, biodegradability in human fluids, high biocompatibility, and increased ability to stimulate new bone formation. A current research trend consists of Mg-based scaffold design and manufacture using AM technologies. This review presents the importance of biodegradable implants in treating bone defects, the most used AM methods to produce Mg scaffolds based on powder metallurgy, AM-manufactured implants properties, and in vitro and in vivo analysis. Scaffold properties such as biodegradation, densification, mechanical properties, microstructure, and biocompatibility are presented with examples extracted from the recent literature. The challenges for AM-produced Mg implants by taking into account the available literature are also discussed.
RESUMO
BACKGROUND: Crohn's disease and ulcerative hemorrhagic colitis are forms of granulomatous inflammatory intestinal disease, which usually affects the gastrointestinal tract. There are also reported rare localizations at the skin, kidney, joints, liver and eye level. Pulmonary involvement is relatively rare, and it is most commonly reported in suppuration with bronchiectasis. On the other hand, sarcoidosis is, in principle, a thoracic localization of a granulomatosis disease, although bowel, skin and intestinal disorders are described. There is not a clear line to separate Crohn's disease from sarcoidosis with, possibly because they are, in fact, considered to have the same inflammatory granulomatosis disease pathology. The diagnoses of the two entities, sarcoidosis and Crohn's disease, are based on non-pathognomonic, inclusive clinical and paraclinical criteria, without elements of the mutual exclusion of typical locations. CASE REPORT: We present a very rare case of a young male, already diagnosed with small-bowel Crohn's disease. Granulomatous lung disease with major hemoptysis requires emergency surgery. An intraoperative assessment revealed a necrotic hemorrhagic lesion located in the left lower lobe and a lobectomy was performed. The final pathological report showed the presence of non-caseous granulomatous inflammation, with the identification of specific multinucleated giant cells. CONCLUSIONS: The identical diagnostic principles of Crohn's disease and sarcoidosis, Crohn's disease as a predecessor to pulmonary lesions, the clinical picture and the necrotico-hemorrhagic appearance of the unilateral pulmonary lesion, which are similar to aggressive necrotico-hemorrhagic or perforating intestinal forms, are arguments in favor of the diagnosis of pulmonary Crohn's disease and not pulmonary sarcoidosis. At the same time, in general, the two diseases have overlapping elements, suggesting they are, in fact, not the same disease with different facets.
RESUMO
The association of an ostium primum-type defect with a cleft anterior mitral valve is known in the medical literature as the partial form of an atrioventricular canal. We present a case report about a 20-year-old woman with minimal symptomatology that discovered her pathology on routine echocardiography. Today, surgical operation remains the gold standard in such pathologies, especially mandatory when there is important valvular regurgitation and left-to-right shunt. Currently living in the era of fast and good cosmetic outcomes, minimally invasive and endovascular approaches should be developed and more often practiced. This scientific presentation is the first step in showing our department steps in performing minimally invasive surgeries as a routine.
RESUMO
Malignant peripheral nerve sheath tumour (MPNST) is an aggressive and uncommon cancer developing in the peripheral nerve sheath. Primary cardiac MPNST is an extremely rare finding, with no specific imaging and clinical characteristics. Only a handful of cases have been reported in the literature; thus, little is still known about them. Cardiac computed tomography (CT) and cardiac magnetic resonance imaging (CMRI) are important means of assessing cardiac morphology and function. The preferred course of treatment for this pathology is by full surgical resection of the tumour, with negative (clear) margins, followed by adjuvant radiotherapy and chemotherapy. We present the case of a 42-year-old woman with no significant cardiovascular symptoms who was incidentally diagnosed during routine transthoracic echocardiography (TTE) with a cardiac mass located in the left ventricle.
Assuntos
Neoplasias de Bainha Neural , Neurofibrossarcoma , Feminino , Humanos , Adulto , Neoplasias de Bainha Neural/diagnóstico por imagem , Neoplasias de Bainha Neural/patologia , Ventrículos do Coração/diagnóstico por imagem , Ventrículos do Coração/patologia , Imageamento por Ressonância Magnética , Radioterapia AdjuvanteRESUMO
Sr2+-substituted ß-tricalcium phosphate (ß-TCP) powders were synthesized using the mechano-chemical activation method with subsequent pressing and sintering to obtain ceramics. The concentration of Sr2+ in the samples was 0 (non-substituted TCP, as a reference), 3.33 (0.1SrTCP), and 16.67 (0.5SrTCP) mol.% with the expected Ca3(PO4)2, Ca2.9Sr0.1(PO4)2, and Ca2.5Sr0.5(PO4)2 formulas, respectively. The chemical compositions were confirmed by the energy-dispersive X-ray spectrometry (EDX) and the inductively coupled plasma optical emission spectroscopy (ICP-OES) methods. The study of the phase composition of the synthesized powders and ceramics by the powder X-ray diffraction (PXRD) method revealed that ß-TCP is the main phase in all compounds except 0.1SrTCP, in which the apatite (Ap)-type phase was predominant. TCP and 0.5SrTCP ceramics were soaked in the standard saline solution for 21 days, and the phase analysis revealed the partial dissolution of the initial ß-TCP phase with the formation of the Ap-type phase and changes in the microstructure of the ceramics. The Sr2+ ion release from the ceramic was measured by the ICP-OES. The human osteosarcoma MG-63 cell line was used for viability, adhesion, spreading, and cytocompatibility studies. The results show that the introduction of Sr2+ ions into the ß-TCP improved cell adhesion, proliferation, and cytocompatibility of the prepared samples. The obtained results provide a base for the application of the Sr2+-substituted ceramics in model experiments in vivo.
Assuntos
Solução Salina , Estrôncio , Apatitas/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Fosfatos de Cálcio/química , Fosfatos de Cálcio/farmacologia , Cerâmica/química , Cerâmica/farmacologia , Humanos , Íons , Pós , Estrôncio/química , Estrôncio/farmacologia , Difração de Raios XRESUMO
The main problems directly linked with the use of PMMA bone cements in orthopedic surgery are the improper mechanical bond between cement and bone and the absence of antimicrobial properties. Recently, more research has been devoted to new bone cement with antimicrobial properties using mainly antibiotics or other innovative materials with antimicrobial properties. In this paper, we developed modified PMMA bone cement with antimicrobial properties proposing some experimental antimicrobial agents consisting of silver nanoparticles incorporated in ceramic glass and hydroxyapatite impregnated with peppermint oil. The impact of the addition of antimicrobial agents on the structure, mechanical properties, and biocompatibility of new PMMA bone cements was quantified. It has been shown that the addition of antimicrobial agents improves the flexural strength of the traditional PMMA bone cement, while the yield strength values show a decrease, most likely because this agent acts as a discontinuity inside the material rather than as a reinforcing agent. In the case of all samples, the addition of antimicrobial agents had no significant influence on the thermal stability. The new PMMA bone cement showed good biocompatibility and the possibility of osteoblast proliferation (MTT test) along with a low level of cytotoxicity (LDH test).
RESUMO
(1) Background: Resorbable Mg-based implants represent a new direction in orthopedic surgery but have some drawbacks, such as their rapid biodegradation and increased rate of corrosion. Some in vitro studies hypothesized that tissue necrosis, incision dehiscence, risk of gas embolization in vital organs, interference with coagulation processes, and trophocyte viability impairment can occur. (2) Methods: We conducted an in vivo study on ten rabbit cases, in two groups; group one, consisting of six cases, received cylindrical implants of Mg-1Ca alloy in tibial intramedullary bone tissue. Group two, consisting of four cases, received Mg-1Ca parallelepiped implants, in the thigh muscular tissue. We recorded and compared weight (preoperatively and at 2, 4, and 6 weeks postoperatively), complete blood count, serum electrolytes, liver and kidney functional markers, and coagulation parameters, prior to and at 6 weeks after surgery. Local evolution was assessed radiologically and with tissue biopsies with complete pathology analysis. (3) Results: All biological markers and clinical evolution were favorable, showing good integration of the implants with none of the local or systemic signs of degradation. (4) Conclusions: Our study shows that the clinical use of Mg-1Ca bioresorbable alloys can be safe as none of the cited local or systemic complications have been identified.
RESUMO
Osteochondral lesions (OCLs) that are frequently encountered in skeletally immature and adult patients are more common than once thought, and their incidence rate is rising. These lesions can appear in many synovial joints of the body, such as the shoulder, elbow, hip, and ankle, occurring most often in the knee. The term osteochondral lesion includes a vast spectrum of pathologies such as osteochondritis dissecans, osteochondral defects, osteochondral fractures, and osteonecrosis of the subchondral bone. When considering this, the term osteochondral fracture is preserved only for an osteochondral defect that combines disruption of the articular cartilage and subchondral bone. These fractures commonly occur after sports practice and are associated with acute lateral patellar dislocations. Many of these lesions are initially diagnosed by plain radiographs; however, a computed tomography (CT) scan or magnetic resonance imaging (MRI) can add significant value to the diagnosis and treatment. Treatment methods may vary depending on the location and size of the fracture, fragment instability, and skeletal maturity. The paper reports a 14-year-old boy case with an osteochondral fracture due to sports trauma. The medical approach involved an arthrotomy of the knee, drainage of the hematoma, two Kirschner wires (K-wires) for temporary fixation to restructure anatomic alignment, and a titanium Herbert screw fixing the fracture permanently. The patient had a favorable postoperative outcome with no residual pain, adequate knee stability, and a normal range of motion. The mobility of the knee was fully recovered.
RESUMO
The failure of hip prostheses is a problem that requires further investigation and analysis. Although total hip replacement is an extremely successful operation, the number of revision surgeries needed after this procedure is expected to continue to increase due to issues with both bone cement types and cementation techniques (depending on the producer). To conduct a comparative analysis, as a surgeon prepared the bone cement and introduced it in the body, this study's team of researchers prepared three types of commercial bone cements with the samples mixed and placed them in specimens, following the timeline of the surgery. In order to evaluate the factors that influenced the chemical composition and structure of each bone cement sample under specific intraoperative conditions, analyses of the handling properties, mechanical properties, structure, and composition were carried out. The results show that poor handling can impede prosthesis-cement interface efficacy over time. Therefore, it is recommended that manual mixing be avoided as much as possible, as the manual preparation of the cement can sometimes lead to structural unevenness.
RESUMO
Angiolipomas are rare, benign tumors resulting from the proliferation of adipose tissue and blood vessels, most frequently encountered subcutaneously at the upper limbs and trunk level. Due to their rarity, few cases of intraosseous angiolipomas are presented in the literature. The paper reports a 50-year-old female case with intracranial hypertension syndrome, frontal and parietal headache, nausea, and vomiting symptoms increasing in intensity. A CT exam revealed two hypodense expansive intraosseous formations/lesions. The first one was located in the projection of the frontal bone and the second one was placed on the left parietal bone. After further investigations, a two-stage procedure was considered. A frontal craniotomy with excision of the intraosseous tumor was performed in the first stage. In the second stage, a left parietal craniotomy was done with excision of the intraosseous tumor combined with a cranioplasty procedure. The patient had a favorable postoperative evolution with no symptoms or neurological deficits. This is among the few reported cases of intraosseous angiolipoma located at the cranium level and the first case report of two intraosseous angiolipomas situated on the same site. The medical recommendation was a complete surgical excision of the lesion followed by cranioplasty.
RESUMO
Intraoperative haemostasis is of paramount importance in the practice of cardiovascular surgery. Over the past 70 years, topical haemostatic methods have advanced significantly and today we deal with various haemostatic agents with different properties and different mechanisms of action. The particularity of coagulation mechanisms after extracorporeal circulation, has encouraged the introduction of new types of topic agents to achieve haemostasis, where conventional methods prove their limits. These products have an important role in cardiac, as well as in vascular, surgery, mainly in major vascular procedures, like aortic dissections and aortic aneurysms. This article presents those agents used for topical application and the mechanism of haemostasis and offers general recommendations for their use in the operating room.
RESUMO
Magnesium (Mg)-based alloys have become an important category of materials that is attracting more and more attention due to their high potential use as orthopedic temporary implants. These alloys are a viable alternative to nondegradable metals implants in orthopedics. In this paper, a detailed overview covering alloy development and manufacturing techniques is described. Further, important attributes for Mg-based alloys involved in orthopedic implants fabrication, physiological and toxicological effects of each alloying element, mechanical properties, osteogenesis, and angiogenesis of Mg are presented. A section detailing the main biocompatible Mg-based alloys, with examples of mechanical properties, degradation behavior, and cytotoxicity tests related to in vitro experiments, is also provided. Special attention is given to animal testing, and the clinical translation is also reviewed, focusing on the main clinical cases that were conducted under human use approval.