The effect of the KTP laser on smear layer and temperature change: an in vitro study.

The purpose of this study was to evaluate the effects of potassium-titanyl-phosphate (KTP) laser irradiation on smear layer removal and temperature changes of the root surfaces. Two hundred four extracted single-root human premolars were included. The canals were instrumented and divided into two main groups: group A (smear layer examination n:119) and group B (temperature change examination n:85). Each group was divided into subgroups (n:17) according to the different five laser power settings: A1, B1: 1 W-5.33 J/cm2; A2, B2: 1.5 W-7.52 J/cm2; A3, B3: 2 W-10.3 J/cm2; A4, B4: 3 W-15.5 J/cm2, A5, B5: 4 W-20.1 J/cm2, A6: positive control no laser irradiation-irrigated 2 mL for 2 min 2.5% NaOCl + 2 mL distilled water and A7: negative control groups no laser irradiation irrigated 2 mL for 2 min 17% EDTA + 2 mL for 2 min 2.5% NaOCl + 2 mL distilled water. The temperature elevations were measured with an infrared thermographic camera and smear layer examined by scanning electron microscope. According to Kruskal-Wallis and Tukey's tests, in all groups the highest smear scores were in the apical third. In all areas, there were statistically significant differences between negative control group (17% EDTA) and all other groups (p < 0.05). The highest smear scores were determined in 1 W KTP laser and positive control (2.5% NaOCl) groups. Statistically, in all thirds, the differences the 3 W and 4 W KTP laser groups between each other and all other groups were significant (p < 0.05). After the end of the use of the laser, increase in temperature values in all groups were found to be below 10 °C in 20 s.

Comparison of Conventional Syringe, CanalBrush, EndoActivator, Photon-Induced Photoacoustic Streaming, and Manual Instrumentation in Removing Orange-Brown Precipitate: An In Vitro Study.

OBJECTIVE: The aim of this in vitro study was to compare the various techniques for removing precipitate formed after irrigation with sodium hypochlorite (NaOCl) and chlorhexidine (CHX). BACKGROUND DATA: It is still unclear whether different irrigant activation systems can effectively remove precipitate that is firmly attached to the root canal walls. METHODS: Eighty-two extracted single-rooted human teeth were instrumented by using the ProTaper rotary system. The roots were irrigated with 5% NaOCl and then 2% CHX to form orange-brown precipitate on the root canal walls. The teeth were sectioned longitudinally, and the amount of precipitate on the canal walls was measured under a stereomicroscope at 15 × magnification before the root halves were reassembled. Then, conventional syringe irrigation (CSI), CanalBrush (CB), EndoActivator (EA) system, photon-induced photoacoustic streaming (PIPS), and manual instrumentation (MI) techniques were used to remove the precipitate, during which 5 mL of distilled water was used for 1 min. The amount of precipitate remaining on the canal walls was measured, and the percentage of precipitate removed was calculated. Data were analyzed by using the Kruskal-Wallis and Mann-Whitney U tests (p = 0.05). RESULTS: All experimental groups contained residual precipitate. The precipitate was more effectively removed in the MI group than in the other groups (p < 0.05). The CB and EA groups showed better removal than the CSI and PIPS groups (p < 0.05), and there were no significant differences in removal between these latter two groups (p > 0.05). CONCLUSIONS: None of the techniques used was able to completely remove the orange-brown precipitate from the root canal surfaces.

Effect of sodium hypochlorite irrigation with or without surfactants on the bond strength of an epoxy-based sealer to dentin.

OBJECTIVES: This study evaluated the effect of sodium hypochlorite (NaOCl) irrigation with or without surfactants on the bond strength of an epoxy-based sealer to the root canal dentin. MATERIALS AND METHODS: Eighty decoronated single-rooted human mandibular premolars were instrumented using the rotary system. The roots were subsequently rinsed with 5 ml 17 % EDTA for 1 min and then randomly divided into 3 test groups (n = 20) and 1 control group (n = 20) according to the type of irrigation with experimental 5 % NaOCl (Wizard, RehberKimya, Istanbul, Turkey) solutions: Group 1: NaOCl-0.1 % benzalkonium chloride; Group 2: NaOCl-0.1 % Tween 80; Group 3: NaOCl-0.1 % Triton X-100; control group: NaOCl without any surfactants. Five samples from each group were prepared for scanning electron microscopy to examine the surface of root canal dentin. The 15 samples remaining in each group were obturated with gutta-percha and AH Plus (Dentsply DeTrey GmbH, Konstanz, Germany) using the cold lateral compaction technique. A push-out test was used to measure the bond strength between the sealer and root canal dentin. Data were analyzed using two-way analysis of variance and Tukey's post hoc tests (P = 0.05). RESULTS: The NaOCl-0.1 % Triton X-100 group demonstrated the highest mean bond-strength values in all root thirds among the groups (P < 0.05). However, the bond strength of the sealer in the NaOCl-0.1 % benzalkonium chloride and NaOCl-0.1 % Tween 80 groups did not differ from that in the control group (P > 0.05). Additionally, the bond-strength values decreased in the corono-apical direction for all groups (P < 0.05). CONCLUSIONS: NaOCl solution with Triton X-100 can provide higher bond strength of the epoxy resin-based sealer to root dentin compared to NaOCl solution wiithout any surfactant. CLINICAL RELEVANCE: The bond strength of sealer to dentin can be improved by the addition of the surfactants to NaOCl solution.

Apical extrusion of debris during root canal preparation using a novel nickel-titanium file system: WaveOne gold.

AIM: This study was intended to evaluate the amount of apically extruded debris following root canal preparation with three different instrumentation systems. MATERIALS AND METHODS: Sixty mandibular incisor teeth were selected and randomly divided into three groups (n = 20/group) according to the instrumentation system used: the ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), the Twisted File Adaptive (TFA; SybronEndo, Orange, CA, USA), and the WaveOne Gold (WOG; Dentsply Maillefer, Ballaigues, Switzerland). All apically extruded debris was collected and dried in preweighed glass vials. The mean weight of the apically extruded debris was obtained using a microbalance. The time for root canal preparation was also recorded. The data were analyzed using a one-way analysis of variance. RESULTS: The mean weights of apically extruded debris were 0.00035 ± 0.00014 g (PTN); 0.00023 ± 0.0001 g (TFA); and 0.00019 ± 0.0001 g (WOG) (P < 0.01). The mean preparation time value was 301,13 ± 62.14 s (PTN); 234.27 ± 34.88 s (TFA); and 239.8 ± 58.6 s (WOG) (P < 0.05). CONCLUSIONS: The PTN system extruded more debris than the TFA and WOG systems. The TFA and WOG systems were faster than the PTN system.

Comparison of Smear Layer Removal Ability of QMix with Different Activation Techniques.

INTRODUCTION: To evaluate the effectiveness of QMix solution (Dentsply Tulsa Dental Specialties, Tulsa, OK) on the smear layer using the following irrigation activation techniques: the EndoActivator (EA) system (Dentsply Tulsa Dental Specialties), photon-initiated photoacoustic streaming (PIPS), and an Er:YAG laser with an endodontic fiber tip. METHODS: Sixty-four extracted single-rooted human teeth were decoronated and the canals instrumented with ProTaper (Denstply Maillefer, Ballagues, Switzerland) up to size F4. The canals were irrigated with 5.25% sodium hypochlorite and a saline solution for 1 minute each. The specimens were then divided randomly into 4 experimental and 4 control groups (n = 8) according to the final irrigation activation technique. These groups included group 1, 2.5 mL QMix; group 2, QMix + EA; group 3, QMix + PIPS; and group 4: QMix + Er:YAG. Laser activated distilled water was used as control groups 5, 6, 7, and 8. Teeth were split longitudinally, and specimens were observed under a scanning electron microscope. Images were taken at the coronal, middle, and apical thirds of the teeth at a magnification of 1000× and were scored in the presence of the smear layer. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The highest scores were found in the apical third of all groups (P < .05). The QMix + Er:YAG group removed the smear layer more effectively than the nonactivated QMix group in the apical third (P < .05). The QMix + EA group removed the smear layer significantly in all thirds of the teeth when compared with the nonactivated QMix group (P < .05). The QMix + PIPS group showed a significantly better effect than the QMix group in the coronal third (P < .05). CONCLUSIONS: The EA and Er:YAG laser enhanced the smear layer removal ability of QMix in the apical thirds of the canals. QMix removed more smear layer in the coronal thirds when activated with the PIPS technique.

Efficacy of Laser-Activated Irrigants in Calcium Hydroxide Removal from the Artificial Grooves in Root Canals: An Ex Vivo Study.

OBJECTIVE: The aim of this study was to investigate the efficacy of an erbium chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser with different irrigation solutions [sodium hypochlorite (NaOCl), ethylenediaminetetraacetic acid (EDTA), QMix 2in1, and peracetic acid] in removing calcium hydroxide (CH) from artificial grooves created in root canals. BACKGROUND DATA: CH has to be removed totally before the root canal filling. Any CH residue on the dentin walls may affect the dentinal bond strength and the penetration of sealers into the dentin tubules, and may increase apical leakage. In addition, such a remnant could react chemically with sealers and, possibly, influence physical properties. Therefore, complete removal of CH placed inside the root canals is recommended, using various products and techniques. METHODS: The root canals of 160 extracted single-rooted mandibular premolars were prepared with ProTaper Universal rotary instruments up to size F4. The roots were split longitudinally along the length of the instrumented canals, and a standardized groove was prepared in the apical part of one segment. CH powder mixed with distilled water was placed into the grooves, and the root halves were then reassembled. The roots were randomly divided into two main groups according to the selected irrigation techniques (needle and laser activation) and then each main group was divided into four subgroups according to the final irrigation (NaOCl, EDTA, QMix 2in1, and peracetic acid) protocols used. After irrigation, the roots were disassembled and digital images were taken using a stereomicroscope. Measurements of residual CH were performed as percentages of the overall groove surface area with image analysis software. The data obtained were analyzed using one way analysis of variance and Tukey's honest significant difference tests. Statistical significance was set at p < 0.05. RESULTS: Significantly less residual CH was obtained in the laser-activated groups than in the needle-irrigated groups (p < 0.05). According to both main groups' data, NaOCl left significantly more CH than the other groups (p < 0.05). However, there was no significant difference among the EDTA, QMix 2in1, and peracetic acid groups. CONCLUSIONS: None of the techniques removed the CH dressing completely. Laser-activated irrigation was significantly more effective than needle irrigation.

Comparison of Nd:YAG and diode laser irradiation during intracoronal bleaching with sodium perborate: color and Raman spectroscopy analysis.

OBJECTIVE: The aim of this study was to evaluate the color and enamel structure changes after intracoronal bleaching with sodium perborate under neodymium:yttrium-aluminum-garnet (Nd:YAG) and diode laser irradiation. BACKGROUND DATA: Although some studies investigated the efficacy of laser irradiation during intracoronal bleaching, no study has been conducted to investigate the changes in both color and enamel structure during intracoronal bleaching with laser irradiation. METHODS: Thirty-six extracted mandibular incisors were used. The root canals were prepared and filled with AH Plus and gutta-percha. Baseline color values and Raman spectra were obtained from all samples. The samples were randomly divided into three groups as follows: group 1, intracoronal bleaching with sodium perborate plus NdYAG laser irradiation; group 2, intracoronal bleaching with sodium perborate plus diode laser irradiation; and group 3, intracoronal bleaching with sodium perborate without any laser irradiation. Following the bleaching procedures, the final baseline color values and Raman spectra were obtained. The baseline and final values were statistically analyzed. Statistical analyses were performed with SPSS 18.0 software using Anova and the Kruskal-Wallis test. RESULTS: There was a significant difference between the Nd:YAG laser and control groups (p<0.05). There was no significant difference between the diode laser group and the control group, or the diode laser group and the Nd:YAG laser group. There was no significant difference among all groups in terms of Raman relative intensity (RRI) and fluorescence intensity (FI) percentage values (p>0.05). CONCLUSIONS: Laser application, especially Nd:YAG laser irradiation, was able to increase the efficacy of intracoronal bleaching with sodium perborate. Laser irradiation significantly increased the bleaching efficacy without any changes in the enamel surface structure.

Effects of three different irrigating solutions and KTP laser irradiation on apical leakage: an electrochemical study.

OBJECTIVE: The purpose of this study was to evaluate the effect of three different irrigating solutions (17% EDTA, 10% citric acid and 2.5% NaOCl) and KTP laser irradiation on apical leakage using an electrochemical method. MATERIALS AND METHODS: Sixty extracted single-rooted human teeth with mature apices were instrumented up to a size 35 K-file. After using each file and before proceeding to the next, canals were irrigated with 2 ml of 2.5% NaOCl. All teeth were then randomly divided into four groups. In group 1, the root canals were irrigated with a final flush of 17% EDTA. In group 2, the root canals were irrigated with a final flush of 10% citric acid. In group 3, the root canals were irradiated with KTP laser at 1 W, 4.45 J/cm(2). In group 4, the root canals were irrigated with a final flush of 2.5% NaOCl. The root canals were then filled using the cold lateral condensation method. Apical leakage was evaluated using an electrochemical method over a period of 10 days. Data were analysed using Tukey HSD and Friedmann tests with p = 0.05 as the level for statistical significance. RESULTS: The 17% EDTA and 10% citric acid groups had statistically less apical leakage than the 2.5% NaOCl group at days 7, 8, 9 and 10 (p < 0.05); however, no significant differences were found between the tested groups at the other time intervals (p > 0.05). No significant difference was found between the KTP laser group and other groups tested at all time intervals (p > 0.05). CONCLUSION: All groups were unable to eliminate apical leakage. However, final irrigation with 17% EDTA and 10% citric acid following root canal preparation reduced postobturation apical leakage compared with 2.5% NaOCl irrigation. When KTP laser and the other three irrigants were compared, no significant difference was found.