Impacts of Desalination Brine Discharge on Benthic Ecosystems.

Seawater reverse osmosis (SWRO) desalination facilities produce freshwater and, at the same time, discharge hypersaline brine that often includes various chemical additives such as antiscalants and coagulants. This dense brine can sink to the sea bottom and creep over the seabed, reaching up to 5 km from the discharge point. Previous reviews have discussed the effects of SWRO desalination brine on various marine ecosystems, yet little attention has been paid to the impacts on benthic habitats. This review comprehensibly discusses the effects of SWRO brine discharge on marine benthic fauna and flora. We review previous studies that indicated a suite of impacts by SWRO brine on benthic organisms, including bacteria, seagrasses, polychaetes, and corals. The effects within the discharge mixing zones range from impaired activities and morphological deformations to changes in the community composition. Recent modeling work demonstrated that brine could spread over the seabed, beyond the mixing zone, for up to several tens of kilometers and impair nutrient fluxes from the sediment to the water column. We also provide a possible perspective on brine's impact on the biogeochemical process within the mixing zone subsurface. Desalination brine can infiltrate into the sandy bottom around the discharge area due to gravity currents. Accumulation of brine and associated chemical additives, such as polyphosphonate-based antiscalants and ferric-based coagulants in the porewater, may change the redox zones and, hence, impact biogeochemical processes in sediments. With the demand for drinking water escalating worldwide, the volumes of brine discharge are predicted to triple during the current century. Future efforts should focus on the development and operation of viable technologies to minimize the volumes of brine discharged into marine environments, along with a change to environmentally friendly additives. However, the application of these technologies should be partly subsidized by governmental stakeholders to safeguard coastal ecosystems around desalination facilities.

Antiscalants used in the desalination industry impact the physiology of the coral Montipora capricornis.

Many coral reefs are found in arid and semi-arid regions that often face severe water scarcity and depend on seawater desalination for freshwater supply. Alongside freshwater production, desalination plants discharge brine waste into the sea. Brine includes various chemicals (e.g., antiscalants) that may harm the coastal environment. Although widely used, little is known about the ecotoxicological effects of antiscalants (AS) on hard corals. This study compared the impacts of polyphosphonate-based and polymer-based ASs on the coral Montipora capricornis. After two weeks of exposure, we determined the effects of AS on coral physiology, symbiotic microalgae, and associated bacteria, using various analytical approaches such as optical coherence tomography, pulse amplitude modulated fluorometry, and oxidative stress biomarkers. Both ASs reduced polyp activity (∼25%) and caused tissue damage (30% and 41% for polymer and polyphosphonate based AS, respectively). In addition, exposure to polyphosphonate-based AS decreased the abundance of endosymbiotic algae (39%) and upregulated the antioxidant capacity of the animal host (45%). The microalgal symbionts were under oxidative stress, with increased levels of antioxidant capacity and oxidative damage (a 2-fold increase compared to the control). Interestingly, exposure to AS enhanced the numbers of associated bacteria (∼40% compared to the control seawater) regardless of the AS type. Our results introduce new insights into the effects of brine on the physiology of hard corals, highlighting that choosing AS type must be examined according to the receiving ecosystem.

Discharge of Polyphosphonate-Based Antiscalants via Desalination Brine: Impact on Seabed Nutrient Flux and Microbial Activity.

Desalination brine is a hypersaline byproduct that contains various operational chemicals such as polyphosphonate-based antiscalants. Brine often sinks and flows over the seabed by density currents; therefore, it may affect sediment-water nutrient fluxes and thus microbial activity. We quantified these parameters in brine plumes around two large-scale desalination facilities located in the P-limited Southeastern Mediterranean Sea. The benthic nutrient fluxes and microbial activity were determined using ex-situ core benthocosms, to which we added brine from the dispersion area in excess salinities of ∼3% and 5% above natural levels. A higher influx of dissolved organic phosphorus (∼6-fold) and an efflux of dissolved organic carbon (∼1.7-fold) were measured in the brine-amended cores relative to the controls. This was accompanied by increased oxygen consumption (15%) and increased microbial activity (∼1.5-6.5-fold). Field observations support the results from experimental manipulations, yielding ∼4.5-fold higher microbial activity rates around the brine plume compared to uninfluenced locations. Our results imply that desalination brine can alter sedimentary processes affecting benthic nutrients inventories. Moreover, we show that brine acts as a vector of anthropogenic P, stimulating microbial activity in the sediment-water interface.

Development of anti-biofouling feed spacers to improve performance of reverse osmosis modules.

This study investigates the biofouling resistance of modified reverse osmosis (RO) feed spacers. Control spacers (made of polypropylene) were functionalized with a biocidal coating (silver), hydrophilic (SiO2 nanoparticles) or superhydrophobic (TMPSi-TiO2 nanoparticles) anti-adhesive coatings, or a hybrid hydrophilic-biocidal coating (graphene oxide). Performance was measured by adhesion assays, viability tests, and permeate flow decline in a bench scale RO system. The control spacers proved to be one of the better performing materials based on bacterial deposition and dynamic RO fouling experiments. The good anti-adhesive properties of the control can be explained by its near ideal surface free energy (SFE). The only surface modification that significantly reduced biofouling compared to the control was the biocidal silver coating, which outperformed the other spacers by all measured indicators. Therefore, future efforts to improve spacer materials for biofouling control should focus on engineering biocidal coatings, rather than anti-adhesive ones.

Impact of brine and antiscalants on reef-building corals in the Gulf of Aqaba - Potential effects from desalination plants.

Seawater reverse osmosis (SWRO) is becoming an increasingly important source of potable water in arid and semi-arid regions worldwide. Discharge of brine-effluent from desalination facilities has been shown to significantly impact coastal marine ecosystems ranging from seagrass meadows to microbial communities. In this study, we examined the impacts of increased salinity (10% above ambient) and presence of antiscalants (0.2 mg L-1, polyphosphonate-based) on three reef-building coral species; Stylophora pistillata, Acropora tenuis and Pocillopora verrucosa, from the Gulf of Aqaba (northern Red-Sea). Our results indicate that the corals, as well as associated bacteria and algae, were significantly impaired by the elevated salinity and antiscalants, leading to partial bleaching. Specifically, the abundance of bacteria and symbiotic algae as well as calcification rates were typically lower (20-85%, 50-90% and 40-50%, respectively) following incubations with both amendments. However, the impact of desalination brine was often species-specific. Thus, we propose that the ecotoxicological criteria used for hard corals should be determined based on the sensitivity of key species in the community dominating the area affected by desalination discharge.