Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 1 de 1
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
RSC Adv ; 10(59): 35718-35728, 2020 Sep 28.
Artigo em Inglês | MEDLINE | ID: mdl-35517111

RESUMO

Micro-aeration as a pretreatment method improves the efficiency of anaerobic digestion of municipal sewage sludge and consequently promotes the methane production. In this study, adenosine triphosphate (ATP) and flow cytometry (FCM) were employed to monitor the performance of the micro-aerobic process and investigate the survival of bacterial cells within the process. At first, the effect of air flow rate (AFR) (0.1, 0.2, 0.3 and 0.5 vvm) on hydrolysis of mixed sludge in 5 aeration cycles (20, 30, 40, 48 and 60 hours) was examined. Then, the effects of the micro aerobic process on methane (CH4) production in anaerobic digestion were surveyed. The highest VSS reduction was 30.6% and 10.4% for 40 hours in the reactor and control, respectively. Soluble COD also fluctuated between 40.87 and 65.14% in micro-aerobic conditions; the highest SCOD was achieved at the time of 40 h. Microbial activities were increased by 597%, 170% and 79.4% for 20, 30 and 40 h pretreatment with the micro-aerobic process, respectively. Apoptosis assay showed that micro-aerobic pre-treatment at 20, 30 and 40 h increased the percentage of living cells by 57.4, 62.8 and 67.9%, respectively. On the other hand, FCM results showed that the highest percentage of viable bacteria (i.e., 67.9%) was observed at 40 h pretreating which was approximately 40% higher the ones for the control. Variation in cumulative methane production shows that methane production was increased by 221% compared to anaerobic digestion (control group). Therefore, ATP and FCM can be employed as two appropriate, accurate, relatively specific indicators for monitoring the process and bacteria viability.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA