Influence of sesame cake on physicochemical, antioxidant and sensorial characteristics of fortified wheat breads.

Incorporation of two sesame cake preparations, differing in fat, 11 % (LF) and 17 % (HF), and protein, 51 % (LF) and 44 % (HF), contents, respectively, into breads at 6, 12 and 20 % wheat flour substitution levels, led to enriched end-products with antioxidants, suitable also to carry the 'high protein' and 'fiber source' nutrition claims (at ≥ 12 % substitution level). Sesame cake decreased wheat dough resistance to mixing and extension, and peak viscosity (empirical rheology), in a concentration-dependent manner, being more pronounced for LF formulations. Breads with LF incorporation ≥ 12 % had lower specific volumes and harder crumb (texture analysis) throughout storage, than control (100 % wheat flour); however, such adverse effects were diminished in HF bread formulations due to the plasticizing and emulsifying action of the sesame cake fat. Calorimetry showed that the sesame cake had no effect on starch retrogradation, but enhanced amylose-lipid complex formation. Antioxidant activity (ABTS, DPPH and FRAP assays), and phenolic acids (ferulic, p-coumaric and sinapic) and lignan (sesaminol glucosides and sesamolin) contents, determined by HPLC-DAD-MS, were higher in LF breads than their HF counterparts. The presence of some sulfur (off-flavor) and pyrazine (nutty flavor) compounds (SPME-GC-MS), as well as the sesame flavor and bitterness (sensory analysis) were of higher intensity in HF breads, while the 6 % LF product received the highest overall acceptability score among all fortified products. Overall, the sesame cake can be a promising ingredient for production of functional wheat bread depending on its composition and fortification level.

In vitro and in vivo glycemic responses and antioxidant potency of acorn and chickpea fortified gluten-free breads.

Gluten-free (GF) breads, based on rice flour and corn starch (50:50), were fortified with a mixture of acorn flour (ACF) - chickpea flour (CPF) at 30% substitution level of corn starch (i.e., rice flour:corn starch:ACF-CPF 50:20:30) using different flour blends of ACF:CPF at weight ratios of 5:25, 7.5:22.5, 12.5:17.5, and 20:10 in order to improve the nutritional quality and antioxidant potential as well as the glycemic responses of the GF breads; a control GF bread with rice flour:corn starch 50:50 ratio was also prepared. ACF was richer in total phenolic content than CPF, whereas CPF was characterized by higher amounts of total tocopherols and lutein compared to ACF. For both ACF and CPF as well as the fortified breads, the most abundant phenolic compounds were gallic (GA) and ellagic (ELLA) acids as found by HPLC-DAD analysis, while a hydrolysable tannin, valoneic acid dilactone, was also identified and quantified by HPLC-DAD-ESI-MS in high amount in the ACF-GF bread having the highest level of ACF (ACF:CPF 20:10), even though it seemed to decompose during breadmaking, possibly into GA and ELLA. Therefore, the inclusion of these two raw materials as ingredients in GF bread formulations resulted in baked products with enhanced concentrations of such bioactive compounds and higher antioxidant activities, as indicated by three different assays (DPPH, ABTS and FRAP). The extent of glucose release, as evaluated by an in vitro enzymic assay, was negatively correlated (r = -0.96; p = 0.005) with the level of added ACF, and was significantly reduced for all ACF-CPF fortified products when compared with their non-fortified GF counterpart. Furthermore, the GF bread containing a flour mixture of ACP:CPF at a weight ratio of 7.5:22.5, was subjected to an in vivo intervention protocol to assess the glycemic response when consumed by 12 healthy volunteers; in this case, white wheat bread was used as reference food. The glycemic index (GI) of the fortified bread was significantly lower compared to the control GF bread (97.4 versus 159.2, respectively), which along with its lower amount of available carbohydrates and the higher level of dietary fibers, resulted in a significantly reduced glycemic load (7.8 versus 18.8 g per serving of 30 g). The present findings underlined the effectiveness of acorn and chickpea flours in improving the nutritional quality and glycemic responses of fortified GF breads with these flours.

LC-MS Identification and Quantification of Phenolic Compounds in Solid Residues from the Essential Oil Industry.

Plant solid residues obtained from the essential oil industry represent a rich source of phenolic compounds with bioactive properties to be used in the food and pharmaceutical industries. A selective and sensitive liquid chromatography-mass spectrometry (LC-MS) method was developed for the simultaneous determination of phenolic compounds in solid residues of the Lamiaceae family plants. A total of 48 compounds can be separated within 35 min by using the Poroshell-120 EC-C18 column, and a gradient mobile phase of 0.1% formic acid and acetonitrile with flow rate of 0.5 mL/min; salicylic acid was used as internal standard. The calibration curves showed good linearity in the tested concentration range for each analyte (R2 > 0.9921), while recoveries ranged from 70.1% to 115.0% with an intra-day and inter-day precision of less than 6.63% and 15.00%, respectively. Based on the retention behavior, as well as absorption and mass spectra, 17 phenolic acids, 19 flavonoids and 2 phenolic diterpenes were identified and quantified in the solid residues obtained by distillation of six aromatic plants: oregano, rosemary, sage, satureja, lemon balm, and spearmint. The method constitutes an accurate analytical and quality control tool for the simultaneous quantitation of phenolics present in solid waste residues from the essential oil industry.

Physical Properties of Chitosan Films Containing Pomegranate Peel Extracts Obtained by Deep Eutectic Solvents.

Pomegranate peel is a byproduct of pomegranate juice production, and is rich in polyphenol compounds. The objective of this study was to investigate the incorporation of pomegranate peel extract in chitosan films. Green deep eutectic solvents (DESs) were used as extraction solvents. Choline chloride (ChCl) and glycerol (Gly) were used as the hydrogen bond acceptor and hydrogen bond donor, respectively; the molar ratio of the DES ingredients, ChCl:Gly, was 1:11. The extraction process was optimized by deploying response surface methodology. Under the optimized conditions, the extraction yield in total polyphenols amounted to 272.98 mg of gallic acid equivalents per g of dry matter and, for total flavonoids, 20.12 mg of quercetin equivalents per g of dry matter, with a liquid to solid ratio of 47 mL g-1, time of 70 min, and 30% (v/v) water concentration in the DES. Afterwards, composite chitosan films were prepared by using five different formulations; the DES containing extract was incorporated as a plasticizer in the chitosan films. Specimens of every recipe were submitted to large deformation tensile testing in Texture Analyzer. Furthermore, water sorption behavior and color parameters of the films were determined.

Bioactive Components and Antioxidant Activity Distribution in Pearling Fractions of Different Greek Barley Cultivars.

In this study, three pearling fractions, namely bran, dehulled grains and pearled grains, derived from fourteen hulled and one hull-less Greek barley cultivars (Hordeum vulgare L.), were analyzed for the protein, ash, ß-glucan, phenolic compounds and tocols contents. High variations appeared in the bioactive contents across the barley cultivars and fractions as well. The protein and ash contents decreased from the outer to the inner layers, whereas ß-glucans presented an inverse trend. The highest protein and ß-glucan contents were in the hull-less cultivar; however, one hulled cultivar (Sirios) exhibited similar ß-glucan content, while another (Constantinos) had even higher protein content. The results also revealed that functional compounds were mainly located in bran fraction. Similar trends were also noted for the antioxidant activity. Ferulic acid was the primary phenolic acid in all fractions, followed by sinapic and p-coumaric acids that were dominant in bound form. However, oligomeric flavonoids, such as prodelphinidin B3, catechin, and procyanidin B2, were more abundant in free form. Overall, this study highlights that different barley cultivars can provide pearling flour fractions of varying composition (nutrients and bioactives), which have the potential to serve as nutritionally valuable ingredients in formulations of cereal-based functional food products.

Natural food colourants derived from onion wastes: application in a yoghurt product.

The valorization of onion (Allium cepa) solid wastes, a 450,000 tonnes/year waste in Europe, by a green extraction method is presented. Polyphenols of onion solid wastes were extracted using eco-friendly solvents, such as water and glycerol. The 2-hydroxypropyl-ß-cyclodextrin was also used as a co-solvent for the augmentation of the extraction yield. The process has been optimized by implementing a central composite face centered design of experiments, with two replicates in the central point, taking into consideration the following independent variables: glycerol concentration, cyclodextrin concentration and temperature. The assessment of the extraction model was based on two responses: the total pigment yield and the antiradical capacity. LC-MS analysis was also employed in order to identify polyphenols and colourants of the obtained extracts. The main polyphenols found were quercetin and quercetin derivatives and the main colourant was cyanidin 3-O-glucoside. The extract was also tested as a food colourant in a yoghurt matrix. The onion leaf extract was found to be a stable natural colourant and could be utilized as an alternative ingredient to synthetic coloring agents. This article is protected by copyright. All rights reserved.

Changing Trends in Nutritional Behavior among University Students in Greece, between 2006 and 2016.

The objective of the present survey was to study the dietary behavior of university students residing away from the family home. In this context, we (a) compared their dietary habits in two time periods, namely 2006 and 2016; and (b) explored the possible impact of gender on the behavioral changes in nutritional choices. A total of four hundred and five university students (2006, n = 242; 2016, n = 163) participated in the study. Dietary assessment was carried out using a qualitative Food Frequency Questionnaire, while data about demographic and lifestyle factors were also collected. Students' dietary habits have been modified in a generally desirable direction, as reflected, e.g., in the elevated consumption of several plant-based foods. Gender was also significantly associated with Body Mass Index (BMI) and changes in dietary attitudes. Possible reasons for the transition towards healthier and more balanced dietary habits could involve the budgetary constraints facing Greece in the last decade, as well as increasing nutritional awareness and other socio-cultural factors characterizing this target group. A deeper understanding of these relations would be crucial to foster nutritional education and further enhance the effectiveness of health promotion campaigns.

Optimization of a green extraction method for the recovery of polyphenols from olive leaf using cyclodextrins and glycerin as co-solvents.

Olive leaf, an agricultural by-product, was studied for the valorization of its biophenols using green extraction techniques; i.e. non-toxic and eco-friendly extraction solvents were used, involving water and glycerol. 2-hydroxypropyl-ß-cyclodextrin (CD), was also employed as an enhancer of the extraction, since cyclodextrins (CD's) are known to improve the extractability of olive leaf polyphenols by forming water soluble inclusion complexes. The process was optimized by implementing a central composite (Box-Behnken) experimental design and response surface methodology, taking into consideration the following independent variables: glycerol concentration (Cgl), CD concentration (CCD) and temperature (T). The evaluation of the extraction model was based on two responses: the total polyphenol yield (YTP) and the antiradical activity (AAR). Optimum values for the extraction process were obtained at 60% (w/v) glycerol content, T = 60 °C and 7% (w/v) CD content. LC-MS analysis was also applied in order to characterize the polyphenolic composition of extracts containing cyclodextrins. The main polyphenols present were oleuropein and oleuropein derivatives. Olive leaf aqueous extracts containing glycerol and cyclodextrins may be used as raw materials/ingredients for several end-users in the food, cosmetic and pharmaceutical industries.

Second trimester amniotic fluid uric acid, potassium, and cysteine to methionine ratio levels as possible signs of early preeclampsia: A case report.

OBJECTIVE: The precise etiopathogenesis of preeclampsia (PE) still remains enigmatic. In recent published work, there is a scientific trend aiming to unveil early biomarkers of PE based on amniotic fluid compositional changes before the development of clinical symptoms. CASE REPORT: We describe a case of an apparently clinically healthy woman, whose amniotic fluid, retrieved after amniocentesis at 222/7 gestational week, had elevated uric acid and potassium concentration, as well as cysteine to methionine ratio. At the time of amniocentesis, conventional clinical signs of PE were absent. The woman developed severe PE and intrauterine growth restriction, at the 280/7 week of gestation. CONCLUSION: Although the limitation of such studies lies in the fact that amniocentesis is an invasive procedure, and thus employed only under specific indications, our scientific observations might be useful for future research towards unraveling the causes of PE.

Engineering interfacial properties by anionic surfactant-chitosan complexes to improve stability of oil-in-water emulsions.

Oil-in-water emulsions (10% w/w n-tetradecane) were prepared at pH = 5.7 by using, as surface active agents, electrostatically formed complexes of sodium stearoyl lactylate (SSL) at a concentration of 0.4% (w/w) and chitosan (CH) in a concentration range between 0 and 0.48% w/w. The use of complexes in emulsions with a low concentration of CH (<0.24% w/w) resulted in highly flocculated systems; instead, with increased level of CH, the emulsions had a smaller average droplet size and exhibited greater stability during storage. Emulsions stabilised by SSL/CH complexes showed non-Newtonian flow behavior with pronounced shear thinning. Among all formulations studied none showed a gel-like behavior since in all cases the G' (storage modulus) was lower that G'' (loss modulus). Adsorption kinetics of pure SSL and SSL/CH complexes to the oil/water interfaces were evaluated using an automated drop tensiometer (ADT). Even though complexation of SSL with CH resulted in a delay of the adsorption of the surface active species at the oil/water interface, the inclusion of the polysaccharide resulted in substantially improved interfacial properties as indicated by a significant increase of the dilatational modulus. Furthermore, the enhanced interfacial properties of the emulsion droplets resulted in improved stability against freeze-thaw cycling. The results of this study may facilitate the development of frozen food products such as desserts with an ameliorated stability and favorable sensorial characteristics.

Physico-chemical properties of whey protein isolate films containing oregano oil and their antimicrobial action against spoilage flora of fresh beef.

Antimicrobial films were prepared by incorporating different levels of oregano oil (0.5%, 1.0%, and 1.5% w/w in the film forming solution) into sorbitol-plasticized whey protein isolate (WPI) films. The moisture uptake behavior and the water vapor permeability (WVP) were not affected by the addition of oregano oil at any of the concentrations used. A reduction of the glass transition temperature (∼10-20°C), as determined by dynamic mechanical thermal analysis (DMTA), was caused by addition of oil into the protein matrix. A decrease of Young modulus (E) and maximum tensile strength (σ(max)) accompanied with an increase in elongation at break (%EB) was observed with increasing oil concentration up to a level of 1.0% (w/w). Wrapping of beef cuts with the antimicrobial films resulted in smaller changes in total color difference (ΔΕ) and saturation difference (Δ(chroma)) during refrigeration (5°C, 12days). The maximum specific growth rate (µ(max)) of total flora (total viable count, TVC) and pseudomonads were significantly reduced (P<0.05) by a factor of two with the use of antimicrobial films (1.5% w/w oil in the film forming solution), while the growth of lactic acid bacteria was completely inhibited. These results pointed to the effectiveness of oregano oil containing whey protein films to increase the shelf life of fresh beef.

Phase transitions, solubility, and crystallization kinetics of phytosterols and phytosterol-oil blends.

The thermal properties, solubility characteristics, and crystallization kinetics of four commercial phytosterol preparations (soy and wood sterols and stanols) and their blends with corn oil were examined. Differential scanning calorimetry (DSC) revealed narrow melting peaks between 138 and 145 degrees C for all phytosterol samples, reversible on rescan. Broader and less symmetrical melting transitions at lower temperatures with increasing oil content were observed for two samples of phytosterol-oil admixtures. The estimated, from the solubility law, deltaH values (34.7 and 70.7 mJ/mg for wood sterols and stanols, respectively), were similar to the DSC experimental data. Fatty acid esters of soy stanols differing in the chain length of the acyl groups (C2-C12) exhibited suppression of the melting point and increase of the fusion enthalpy with increasing chain length of the acyl group; the propionate ester exhibited the highest melting point (Tm: 151 degrees C) among all stanol-fatty acid esters. Solubility of phytosterols in corn oil was low (2-3% w/w at 25 degrees C) and increased slightly with a temperature rise. Plant sterols appeared more soluble than stanols with higher critical concentrations at saturation. The induction time for recrystallization of sterol-oil liquid blends, as determined by spectrophotometry, depended on the supersaturation ratio. The calculated interfacial free energies between crystalline sediments and oil were smaller for sterol samples (3.80 and 3.85 mJ/m2) than stanol mixtures (5.95 and 6.07 mJ/m2), in accord with the higher solubility of the sterol crystals in corn oil. The XRD patterns and light microscopy revealed some differences in the characteristics among the native and recrystallized in oil phytosterol preparations.