Versatile high-pressure gas apparatus for benchtop NMR: Design and selected applications.

A simple, yet highly versatile setup is presented for benchtop NMR analyses of gases at high-pressure. It consists mostly of commercial parts and includes multiple safety features while maintaining a small size to fit into a 1.20 m wide fume hood. Pressures up to 200 bar can be adjusted independently of the sample gas-bottle pressure in a matter of seconds. Mixtures of multiple gases can be produced in situ in a mixing chamber, which also serves to adjust the pressure. The high-pressure hardware and benchtop NMR spectrometer have been tested for long-term stability and repeatability of the measurements. The versatility of the setup is demonstrated by analyzing hydrocarbon-gas with attention to linewidths as well as their 1H relaxation times, by improving the resolution of 1H NMR spectra from solid polymers with pressurized CO2, and by visualizing the ingress of gaseous and supercritical methane into liquid benzene.

NMR relaxometry of oil paint binders.

Mobile nuclear magnetic resonance (NMR) is a flexible technique for nondestructive characterization of water in plants, the physical properties of polymers, moisture in porous walls, or the binder in paintings by relaxation measurements. NMR relaxation data report material properties and therefore can also help to characterize the state of tangible cultural heritage. In this work, we discuss the relaxation behavior in two series of naturally aged paint mock-up samples. First, paints with different pigment concentrations were prepared and investigated in terms of the longitudinal and transverse relaxation-time distributions. We document the evolution of both relaxation-time distributions during the initial drying stage and demonstrate the heightened importance of transverse over longitudinal relaxation measurements. Second, we observe nonlinear dependences of the relaxation times on the pigment concentration in a typical oil binder. Third, in a study of naturally aged paint samples prepared in the years between 1914 and 1951 and subsequently aged under controlled conditions, we explore the possibility of determining the age of paintings using partial least square regression (PLS) by fitting T1 -T2 data with the sample age. Our results suggest some correlation, albeit with significant scatter. Estimating the age of a painting stored under unknown conditions from NMR relaxation data is therefore not feasible, as the cumulative effects of light irradiation, humidity, and biological degradation further obfuscate the chemical and physical impact of aging on the relaxation times in addition to the impact of pigment concentration.

Production of highly concentrated and hyperpolarized metabolites within seconds in high and low magnetic fields.

Hyperpolarized metabolites are very attractive contrast agents for in vivo magnetic resonance imaging studies enabling early diagnosis of cancer, for example. Real-time production of concentrated solutions of metabolites is a desired goal that will enable new applications such as the continuous investigation of metabolic changes. To this end, we are introducing two NMR experiments that allow us to deliver high levels of polarization at high concentrations (50 mM) of an acetate precursor (55% 13C polarization) and acetate (17% 13C polarization) utilizing 83% para-state enriched hydrogen within seconds at high magnetic field (7 T). Furthermore, we have translated these experiments to a portable low-field spectrometer with a permanent magnet operating at 1 T. The presented developments pave the way for a rapid and affordable production of hyperpolarized metabolites that can be implemented in e.g. metabolomics labs and for medical diagnosis.

Desktop NMR spectroscopy for real-time monitoring of an acetalization reaction in comparison with gas chromatography and NMR at 9.4 T.

Monitoring of chemical reactions in real-time is in demand for process control. Different methods such as gas chromatography (GC), mass spectroscopy, infrared spectroscopy, and nuclear magnetic resonance (NMR) are used for that purpose. The current state-of-the-art compact NMR systems provide a useful method to employ with various reaction conditions for studying chemical reactions inside the fume hood at the chemical workplace. In the present study, an acetalization reaction was investigated with compact NMR spectroscopy in real-time. Acetalization is used for multistep synthesis of the variety of organic compounds to protect particular chemical groups. A compact 1 T NMR spectrometer with a permanent magnet was employed to monitor the acid catalyzed acetalization of the p-nitrobenzaldehyde with ethylene glycol. The concentrations of both reactant and product were followed by peak integrals in single-scan 1H NMR spectra as a function of time. The reaction conditions were varied in terms of temperature, agitation speed, catalyst loading, and feed concentrations in order to determine the activation energy with the help of a pseudo-homogeneous kinetic model. For low molar ratios of aldehyde and glycol, the equilibrium conversions were lower than for the stoichiometric ratio. Increasing catalyst concentration leads to faster conversion. The data obtained with low-field NMR spectroscopy were compared with data from GC and NMR spectroscopy at 9.4 T acquired in batch mode by extracting samples at regular time intervals. The reaction kinetics followed by either method agreed well. The activation energies for forward and backward reactions were determined by real-time monitoring with compact NMR at 1 T were 48 ± 5 and 60 ± 4 kJ/mol, respectively. The activation energies obtained with gas chromatography for forward and backward reactions were 48 ± 4 and 51 ± 4 kJ/mol. The equilibrium constant decreases with increasing temperature as expected for an exothermic reaction. The impact of dense sampling with online NMR and sparse sampling with GC was observed on the kinetic outcome using the same kinetic model. Graphical abstract Acetalization reaction kinetics were monitored with real-time desktop NMR spectroscopy at 1 T. Each data point was obtained at regular intervals with a single shot in 15 s. The kinetics was compared with sparsely sampled data obtained with GC and NMR at 9.4 T.

Stacked planar micro coils for single-sided NMR applications.

This paper describes planar micro structured coils fabricated in a novel multilayer assembly for single-sided NMR experiments. By arranging the coil's turns in both lateral and vertical directions, all relevant coil parameters can be tailored to a specific application. To this end, we implemented an optimization algorithm based on simulations applying finite element methods (FEMs), which maximizes the coil's sensitivity and thus signal-to-noise ratio (SNR) while incorporating boundary conditions such as the coil's electrical properties and a localized sensitivity needed for single-sided applications. Utilizing thin-film technology and microstructuring techniques, the planar character is kept by a sub-millimeter overall thickness. The coils are adapted to the Profile NMR-MOUSE® magnet with a homogeneous slice of about 200 µm in height and a uniform depth gradient of about 20T/m. The final design of a coil with 20 turns, separated in four layers with five turns each, and an outer dimension of 4×4 mm(2) is able to measure a sample volume almost five times smaller than that of a state-of-the-art 14×16 mm(2) Profile NMR-MOUSE® coil with the same SNR. This allows for volume-limited measurements with high SNR and enables different future developments. The minimal dead time of 4 µs facilitates further improvements of the SNR by echo adding techniques and the characterization of samples with short T2 relaxation times. Measurements on solid polymers like polyethylene (PE) and polypropylene (PP) with T2 components as short as 200 µs approve the overall beneficial coil properties. Furthermore the ability to perform depth profiling with microscopic resolution is demonstrated.

Para-hydrogen induced polarization of amino acids, peptides and deuterium-hydrogen gas.

Signal Amplification by Reversible-Exchange (SABRE) is a method of hyperpolarizing substrates by polarization transfer from para-hydrogen without hydrogenation. Here, we demonstrate that this method can be applied to hyperpolarize small amounts of all proteinogenic amino acids and some chosen peptides down to the nanomole regime and can be detected in a single scan in low-magnetic fields down to 0.25 mT (10 kHz proton frequency). An outstanding feature is that depending on the chemical state of the used catalyst and the investigated amino acid or peptide, hyperpolarized hydrogen-deuterium gas is formed, which was detected with (1)H and (2)H NMR spectroscopy at low magnetic fields of B(0) = 3.9 mT (166 kHz proton frequency) and 3.2 mT (20 kHz deuterium frequency).

Selective drug trace detection with low-field NMR.

Advances with para-hydrogen induced polarization open up new fields of applications for portable low-field NMR. Here we report the possibility of tracing drugs down to the micromolar regime. We could selectively polarize nicotine quantities similar to those found in one cigarette. Also less than 1 mg of harmine, a drug used for treatment of Parkinson's disease, and morphine extracted from an opium solution were detectable after polarization with para-hydrogen in single-scan (1)H-experiments. Moreover, we demonstrate the possibility to selectively enhance and detect the (1)H-signal of drug molecules with PHIP in proton rich standard solutions that would otherwise mask the (1)H NMR signal of the drug.

NMR with excitation modulated by Frank sequences.

Miniaturized NMR is of growing importance in bio-, chemical, and -material sciences. Other than the magnet, bulky components are the radio-frequency power amplifier and the power supply or battery pack. We show that constant flip-angle excitation with phase modulation following a particular type of polyphase perfect sequences results in low peak excitation power at high response peak power. It has ideal power distribution in both the time domain and the frequency domain. A savings in peak excitation power of six orders of magnitude has been realized compared to conventionally pulsed excitation. Among others, the excitation promises to be of use for button-cell operated miniature NMR devices as well as for complying with specific-absorption-rate regulations in high-field medical imaging.

Spatial distribution of coke residues in porous catalyst pellets analyzed by field-cycling relaxometry and parameter imaging.

The distribution of coke residues inside porous catalyst pellets was investigated on the molecular as well as the macroscopic scale. The presence of coke on the pore surface affects the relaxation properties of adsorbed liquid species; these were determined by field-cycling relaxometry for different polar and nonpolar liquids in metal-doped and metal-free catalyst carrier materials. The presence of metal in the Al2O3 matrix had only a minor influence on the dispersion behavior, while the interaction of the adsorbates with the coke layer leads to considerable changes in the relaxation times at low Larmor frequencies. Lowering the temperature to well below the bulk freezing point of dimethyl sulfoxide resulted in a slightly stronger frequency dependence of T1. Not only relaxation times but also the diffusion coefficient is affected by the presence of coke residues in the pores. For macroscopically heterogeneous samples, they offer the possibility to generate maps of the local coke concentration by introducing appropriate filters into NMR imaging sequences. High-temperature regeneration of coked catalysts leads to such heterogeneous distributions which is visualized by T1 parameter imaging.

Particle motion in gas-fluidized granular systems by pulsed-field gradient nuclear magnetic resonance.

Nuclear magnetic resonance k-space and q-space imaging methods were applied for the first time to monitor the time-averaged density variations and the random motion of granular particles in the presence of gas flow of variable velocity in a model gas-fluidized bed reactor. The transitions toward fluidization, bubbling phase, and slugging phase are visible as sudden changes in the density and the root mean-squared displacement. The onset of these transitions is shown to depend on the particle sizes for a given cell geometry. The effective diffusion coefficients are measured and the distributions of particle displacements, or propagators, are presented.