Surgical treatment of nasal fractures may benefit from intraoperative 3D imaging.

This retrospective study aimed to assess the effects of the use of intraoperative three-dimensional (3D) imaging on outcomes in surgical treatment of nasal fractures. Furthermore, we investigated whether the use of intraoperative imaging improves outcomes and decreases the frequency of corrective surgeries compared to published literature. This retrospective descriptive study included patients who underwent operative treatment for nasal fractures with the use of intraoperative 3D imaging between January 2015 and January 2020 at a University Hospital. The primary outcome measure was patient satisfaction, which was assessed through patient charts about subjective esthetic problems and nasal obstruction. The secondary outcome measures were the number of intraoperative images and necessity of intra- and postoperative revisions. All the outcomes were evaluated using regression analysis. Of the 172 patients, secondary rhinoplasty and intraoperative revision were performed in 10 (6 %) and 93 (54 %) patients, respectively. Postoperatively, 19 (11 %) and 12 (7 %) patients complained of subjective esthetic problems and nasal obstruction, respectively. The intraoperative revision rate in patients undergoing surgical treatment of nasal fractures with intraoperative 3D imaging was >50 %. However, the incidence of postoperative secondary revision, nasal obstruction, and subjective esthetic problems was lower than that reported in the literature not having an intraoperative imaging. Our findings suggest that prompt quality control of the operative result enables immediate correction and prevents postoperative revision.

Toll-Like Receptor 3 Mediates Aortic Stenosis Through a Conserved Mechanism of Calcification.

BACKGROUND: Calcific aortic valve disease (CAVD) is characterized by a phenotypic switch of valvular interstitial cells to bone-forming cells. Toll-like receptors (TLRs) are evolutionarily conserved pattern recognition receptors at the interface between innate immunity and tissue repair. Type I interferons (IFNs) are not only crucial for an adequate antiviral response but also implicated in bone formation. We hypothesized that the accumulation of endogenous TLR3 ligands in the valvular leaflets may promote the generation of osteoblast-like cells through enhanced type I IFN signaling. METHODS: Human valvular interstitial cells isolated from aortic valves were challenged with mechanical strain or synthetic TLR3 agonists and analyzed for bone formation, gene expression profiles, and IFN signaling pathways. Different inhibitors were used to delineate the engaged signaling pathways. Moreover, we screened a variety of potential lipids and proteoglycans known to accumulate in CAVD lesions as potential TLR3 ligands. Ligand-receptor interactions were characterized by in silico modeling and verified through immunoprecipitation experiments. Biglycan (Bgn), Tlr3, and IFN-α/ß receptor alpha chain (Ifnar1)-deficient mice and a specific zebrafish model were used to study the implication of the biglycan (BGN)-TLR3-IFN axis in both CAVD and bone formation in vivo. Two large-scale cohorts (GERA [Genetic Epidemiology Research on Adult Health and Aging], n=55 192 with 3469 aortic stenosis cases; UK Biobank, n=257 231 with 2213 aortic stenosis cases) were examined for genetic variation at genes implicated in BGN-TLR3-IFN signaling associating with CAVD in humans. RESULTS: Here, we identify TLR3 as a central molecular regulator of calcification in valvular interstitial cells and unravel BGN as a new endogenous agonist of TLR3. Posttranslational BGN maturation by xylosyltransferase 1 (XYLT1) is required for TLR3 activation. Moreover, BGN induces the transdifferentiation of valvular interstitial cells into bone-forming osteoblasts through the TLR3-dependent induction of type I IFNs. It is intriguing that Bgn-/-, Tlr3-/-, and Ifnar1-/- mice are protected against CAVD and display impaired bone formation. Meta-analysis of 2 large-scale cohorts with >300 000 individuals reveals that genetic variation at loci relevant to the XYLT1-BGN-TLR3-interferon-α/ß receptor alpha chain (IFNAR) 1 pathway is associated with CAVD in humans. CONCLUSIONS: This study identifies the BGN-TLR3-IFNAR1 axis as an evolutionarily conserved pathway governing calcification of the aortic valve and reveals a potential therapeutic target to prevent CAVD.

Mitochondrial respiration during normothermic liver machine perfusion predicts clinical outcome.

BACKGROUND: Reliable biomarkers for organ quality assessment during normothermic machine perfusion (NMP) are desired. ATP (adenosine triphosphate) production by oxidative phosphorylation plays a crucial role in the bioenergetic homeostasis of the liver. Thus, detailed analysis of the aerobic mitochondrial performance may serve as predictive tool towards the outcome after liver transplantation. METHODS: In a prospective clinical trial, 50 livers were subjected to NMP (OrganOx Metra) for up to 24.ßh. Biopsy and perfusate samples were collected at the end of cold storage, at 1.ßh, 6.ßh, end of NMP, and 1.ßh after reperfusion. Mitochondrial function and integrity were characterized by high-resolution respirometry (HRR), AMP, ADP, ATP and glutamate dehydrogenase analysis and correlated with the clinical outcome (L-GrAFT score). Real-time confocal microscopy was performed to assess tissue viability. Structural damage was investigated by histology, immunohistochemistry and transmission electron microscopy. FINDINGS: A considerable variability in tissue viability and mitochondrial respiration between individual livers at the end of cold storage was observed. During NMP, mitochondrial respiration with succinate and tissue viability remained stable. In the multivariate analysis of the 35 transplanted livers (15 were discarded), area under the curve (AUC) of LEAK respiration, cytochrome c control efficiency (mitochondrial outer membrane damage), and efficacy of the mitochondrial ATP production during the first 6.ßh of NMP correlated with L-GrAFT. INTERPRETATIONS: Bioenergetic competence during NMP plays a pivotal role in addition to tissue injury markers. The AUC for markers of outer mitochondrial membrane damage, ATP synthesis efficiency and dissipative respiration (LEAK) predict the clinical outcome upon liver transplantation. FUNDING: This study was funded by a Grant from the In Memoriam Dr. Gabriel Salzner Stiftung awarded to SS and the Tiroler Wissenschaftsfond granted to TH.

Embryology of the Abdominal Wall and Associated Malformations-A Review.

In humans, the incidence of congenital defects of the intraembryonic celom and its associated structures has increased over recent decades. Surgical treatment of abdominal and diaphragmatic malformations resulting in congenital hernia requires deep knowledge of ventral body closure and the separation of the primary body cavities during embryogenesis. The correct development of both structures requires the coordinated and fine-tuned synergy of different anlagen, including a set of molecules governing those processes. They have mainly been investigated in a range of vertebrate species (e.g., mouse, birds, and fish), but studies of embryogenesis in humans are rather rare because samples are seldom available. Therefore, we have to deal with a large body of conflicting data concerning the formation of the abdominal wall and the etiology of diaphragmatic defects. This review summarizes the current state of knowledge and focuses on the histological and molecular events leading to the establishment of the abdominal and thoracic cavities in several vertebrate species. In chronological order, we start with the onset of gastrulation, continue with the establishment of the three-dimensional body shape, and end with the partition of body cavities. We also discuss well-known human etiologies.

GCN5 contributes to intracellular lipid accumulation in human primary cardiac stromal cells from patients affected by Arrhythmogenic cardiomyopathy.

Arrhythmogenic cardiomyopathy (ACM) is a genetic disease associated with sudden cardiac death and cardiac fibro-fatty replacement. Over the last years, several works have demonstrated that different epigenetic enzymes can affect not only gene expression changes in cardiac diseases but also cellular metabolism. Specifically, the histone acetyltransferase GCN5 is known to facilitate adipogenesis and modulate cardiac metabolism in heart failure. Our group previously demonstrated that human primary cardiac stromal cells (CStCs) contribute to adipogenesis in the ACM pathology. Thus, this study aims to evaluate the role of GCN5 in ACM intracellular lipid accumulation. To do so, CStCs were obtained from right ventricle biopsies of ACM patients and from samples of healthy cadaveric donors (CTR). GCN5 expression was increased both in ex vivo and in vitro ACM samples compared to CTR. When GCN5 expression was silenced or pharmacologically inhibited by the administration of MB-3, we observed a reduction in lipid accumulation and a mitigation of reactive oxygen species (ROS) production in ACM CStCs. In agreement, transcriptome analysis revealed that the presence of MB-3 modified the expression of pathways related to cellular redox balance. Altogether, our findings suggest that GCN5 inhibition reduces fat accumulation in ACM CStCs, partially by modulating intracellular redox balance pathways.

Proximity of the middle meningeal artery and maxillary artery to the mandibular head and mandibular neck as revealed by three-dimensional time-of-flight magnetic resonance angiography.

PURPOSE: The close topographic relationship between vascular and osseous structures in the condylar and subcondylar region and marked variability in the arterial course has been revealed by both imaging and cadaveric studies. This study aimed to verify the previously published information in a large sample and to determine a safe surgical region. METHODS: We analyzed the three-dimensional time-of-flight magnetic resonance angiography images of 300 individuals. RESULTS: The mean distance between the middle meningeal artery and the apex of the condyle or the most medial point of the condyle was 18.8 mm (range: 11.2-25.9 mm) or 14.5 mm (range: 8.8-22.9 mm) respectively. The course of the maxillary artery relative to the lateral pterygoid muscle was medial in 45.7% of cases and lateral in 54.3%. An asymmetric course was evident in 66 patients (22%). The mean distance between the maxillary artery and condylar process at the deepest point of the mandibular notch was 6.2 mm in sides exhibiting a medial course (range: 3.7-9.8 mm) and 6.6 mm in sides exhibiting a lateral course (range: 3.9-10.4 mm). The distances were significantly influenced by age, gender, and the course of the maxillary artery. CONCLUSION: Our study emphasizes the marked inter- and intra-individual variability of the maxillary and middle meningeal arterial courses. We confirmed the proximity of the arteries to the condylar process. Extensive surgical experience and thorough preparation for each individual case are essential to prevent iatrogenic vascular injury.

Volumetric Evaluated Bone Resorption After Open Reduction and Internal Fixation of Condylar Head Fractures of the Mandible.

PURPOSE: Decision making in the management of condylar head fractures remains difficult due to its dependency on multiple factors like fracture type, degree of dislocation, patient`s age and dental condition. As open reduction and internal fixation (ORIF) of condylar head fractures (CHFs) becomes more popular, the question of osteosynthesis removal is controversial. So far, information on volumetric changes after ORIF are available for a short-term period (<6 months) only. This study, therefore, was performed to assess bone resorption after condylar head fractures and to follow-up intermediate-term (>1 year) remodelling after removal of metallic osteosynthesis material. Furthermore clinical outcome was measured using Helkimo Index and put in relation with bone resorption. MATERIALS AND METHODS: A retrospective analysis of 19 patients who underwent open reduction and internal fixation of condylar head fractures at the University Hospital of Zürich between January 2016 and April 2018 using intraoperative cone-beam computed tomography repositioning control was conducted. The bone resorption on the condylar head was measured in the course after removal of osteosynthesis material by segmenting and superimposing of the postoperative 3D radiologic follow-up exam (T2) over the initial intraoperative cone-beam computed tomography (T1) using iPlan-CMF software. Complementary Helkimo index was assessed to put resorption rate in relation to clinical outcome. RESULTS: A total of 19 patients fulfilled the inclusion criteria. The mean follow-up time was 15.6 months and the mean bone resorption on the condylar head was -0.348cm3 or -15.29% of segmented condylar head. There was no correlation of clinical outcome and bone resorption. CONCLUSIONS: Helkimo index showed satisfying results; therefore, ORIF of condylar head fracture proves as a feasible treatment option. The mean bone resorption rate of -15.29% in the intermediate-term follow-up time (mean 15.6 months) is comparable to findings of other studies with short-term follow-up time (< 6 months). Thus, postinterventional remodeling activity and resorption seems highest in the first 4 to 6 postoperative months with little further resorption. In prevention of negative sequelae of protruding implants, timing of osteosynthesis material removal after this period of high bone remodeling activity is recommended. The resorption rate showed no correlation to clinical outcome.

Myogenic progenitor cell transplantation for muscle regeneration following hindlimb ischemia and reperfusion.

BACKGROUND: Muscle is severely affected by ischemia/reperfusion injury (IRI). Quiescent satellite cells differentiating into myogenic progenitor cells (MPC) possess a remarkable regenerative potential. We herein established a model of local application of MPC in murine hindlimb ischemia/reperfusion to study cell engraftment and differentiation required for muscle regeneration. METHODS: A clamping model of murine (C57b/6 J) hindlimb ischemia was established to induce IRI in skeletal muscle. After 2 h (h) warm ischemic time (WIT) and reperfusion, reporter protein expressing MPC (TdTomato or Luci-GFP, 1 × 106 cells) obtained from isolated satellite cells were injected intramuscularly. Surface marker expression and differentiation potential of MPC were analyzed in vitro by flow cytometry and differentiation assay. In vivo bioluminescence imaging and histopathologic evaluation of biopsies were performed to quantify cell fate, engraftment and regeneration. RESULTS: 2h WIT induced severe IRI on muscle, and muscle fiber regeneration as per histopathology within 14 days after injury. Bioluminescence in vivo imaging demonstrated reporter protein signals of MPC in 2h WIT animals and controls over the study period (75 days). Bioluminescence signals were detected at the injection site and increased over time. TdTomato expressing MPC and myofibers were visible in host tissue on postoperative days 2 and 14, respectively, suggesting that injected MPC differentiated into muscle fibers. Higher reporter protein signals were found after 2h WIT compared to controls without ischemia, indicative for enhanced growth and/or engraftment of MPC injected into IRI-affected muscle antagonizing muscle damage caused by IRI. CONCLUSION: WIT-induced IRI in muscle requests increased numbers of injected MPC to engraft and persist, suggesting a possible rational for cell therapy to antagonize IRI. Further investigations are needed to evaluate the regenerative capacity and therapeutic advantage of MPC in the setting of ischemic limb injury.

Surgical Outcomes of Orbital Fracture Reconstruction Using Patient-Specific Implants.

PURPOSE: Patient-specific implants (PSIs) are known to yield reliable outcomes in orbital wall fracture reconstruction (high precision, smoother operating techniques, and shorter surgical duration). This study analyzed the surgical error and clinical and esthetic outcomes of orbital reconstructions with PSIs. METHODS: This ambispective cohort study enrolled patients who underwent orbital reconstruction using PSIs between October 2016 and January 2018. The study end points were surgical error, indication and duration of surgery, long-term sequelae, revision surgeries, and surgical complications. Surgical error was analyzed by superimposing the postoperative implant position onto the preoperative virtual plan. Both qualitative (heat map) and quantitative (distance) measurements were obtained. RESULTS: Three patients were enrolled prospectively, and 23 were enrolled retrospectively. Indications for surgery were defect size (25 patients), diplopia (10 patients), impaired eye motility (4 patients), and significant enophthalmos (6 patients). At the last patient visit, there were 5 cases of diplopia, 1 case of exophthalmos, and 6 cases of slight enophthalmos of incremental degree. In terms of surgical error, a mean distance of 0.6 mm (95% confidence interval, 0.49 to 0.76), with a mean maximal distance of 3.4 mm (95% confidence interval, 2.79 to 4.02), was noted. No revision surgery was necessary. Lid malposition complications were not observed. However, 1 case each of symblepharon and scleral show were observed. No time-saving component was observed. CONCLUSIONS: PSI use in orbital reconstruction guarantees a preplanned 3-dimensional anatomical shape with a mean surgical error of just 0.6 mm. Our clinical results were similar to those of other protocols; however, warranting a complex 3-dimensional anatomical shape also in large orbital fractures with a low mean surgical error is feasible by using PSIs.

Customized Titanium Reconstruction of Orbital Fractures Using a Mirroring Technique for Virtual Reconstruction and 3D Model Printing.

PURPOSE: Early operative reconstruction using titanium mesh is a technique often used for preventing sequelae after an orbital fracture. We sought to examine the utility of patient-specific molding of the mesh with a biomodel via virtual mirroring of the nonaffected side. METHODS: We retrospectively assessed the clinical and radiological outcomes of orbital fracture reconstruction using a customized titanium mesh shaped on 3D-printed biomodels in 34 unilateral orbital fracture cases. Preoperative virtual orbital reconstruction images, using the mirroring technique, were superimposed on postoperative 3D images, and clinical data from patient charts were analyzed. Orbital reconstructions were rated, and the intention to revise results intraoperatively, or during inpatient or outpatient phases, was assessed by 2 consultants and 2 residents. RESULTS: We found that most fractures arose from falls of <3 meters or from interpersonal violence. Ophthalmic injuries included subconjunctival bleeding, ocular contusion, enophthalmos, and diplopia. Long-term sequelae at last followup were diplopia (8.8%) and mild enophthalmos (11.8%). CONCLUSION: Interrater reliabilities regarding consultants' intention to revise results were substantial to almost perfect at any time point. Therefore, using the mirroring technique for the virtual reconstruction of a fractured orbit and a 3D-printed biomodel to customize commercial titanium implants yields good and reliable results, enhances surgical precision, and decreases the need for intraoperative revision, as well as long-term sequelae of orbital fractures.

Radiologic Analysis of Surgically Treated Fractures of the Condylar Process by an Endoscopic-Assisted Transoral Approach.

PURPOSE: This study analyzed the radiologic outcomes of patients with unilateral mandibular condylar fractures treated with open reduction-internal fixation (ORIF) through a transoral approach. PATIENTS AND METHODS: In this retrospective study, the radiologic images of 40 patients who underwent open reduction-internal fixation through a transoral approach were presented to 2 independent examiners. All patients underwent the surgical procedure between January 2015 and December 2016 at the Department of Cranio-Maxillofacial Surgery at UniversitätsSpital Zürich and were included in a previous functional outcome study. The surgical results were analyzed and graded as poor, acceptable, or good. The examiners declared whether they would have made any intraoperative revisions if the radiologic information had been available. Finally, the examiners estimated the required duration of elastic intermaxillary fixation (IMF) from the radiologic images, which was compared with the actual duration. RESULTS: Fracture reduction was classified as good in 33 cases (82.5%), acceptable in 5 cases, and poor in 2 cases by one examiner and as good in 32 cases (80%), acceptable in 6 cases, and poor in 2 cases by the other examiner. The inter-rater reliability was determined to be good (Cohen κ = 0.92). Correct osteosynthesis placement was found in 19 cases by one examiner and in 21 cases by the other examiner, with good inter-rater reliability (κ = 0.8). Moderate inter-rater reliability (κ = 0.4) was found for the required duration of elastic IMF. Furthermore, the estimated elastic IMF duration matched the actual duration in fewer than half of the cases. CONCLUSIONS: It is feasible to achieve reliably good radiologic results when operating on condylar process fractures by a transoral approach with endoscopic assistance and angled instruments. Intraoperative 3-dimensional imaging enables instant quality control and prompts surgical revision if needed.

Does Zygomatic Complex Symmetry Differ Between Healthy Individuals and Surgically Treated Patients Using Intraoperative 3-Dimensional Cone Beam Computed Tomographic Imaging?

PURPOSE: Reconstruction of symmetry after zygomaticomaxillary complex (ZMC) fractures is essential for esthetic appearance as well as function. Therefore, this study aimed to analyze whether bony facial symmetry in patients surgically treated for unilateral ZMC fractures via intraoperative imaging differs from that of healthy individuals. PATIENTS AND METHODS: Retrospective and cross-sectional radiographic measurements of patients treated for unilateral ZMC fractures via intraoperative cone beam computed tomography (CBCT) were performed to evaluate the postoperative ZMC symmetry. The same number of healthy individuals without any history of midfacial trauma matched for age and gender served as the control group. Asymmetry of the ZMC was determined by measuring bilateral differences in the malar eminence position on CBCT. In addition, demographic statistics, etiology, and fracture type were analyzed. RESULTS: Analysis of 57 surgically treated patients and 57 healthy individuals with a mean age of 29 years was performed. No significant difference in the symmetry of the malar eminence position was observed between healthy individuals and patients treated for a unilateral ZMC fracture (P = .890). In one third of patients, corrections were needed after intraoperative CBCT control. CONCLUSIONS: The results of this study indicate that, on average, a ZMC asymmetry of 1.6 mm is observed in healthy individuals. Furthermore, the use of intraoperative CBCT for the treatment of dislocated ZMC fractures helps to achieve precise anatomic, symmetrical repositioning and is suggested to improve the quality of care.

Improved Results in Closed Reduction of Zygomatic Arch Fractures by the Use of Intraoperative Cone-Beam Computed Tomography Imaging.

PURPOSE: The use of intraoperative imaging could help overcome the insufficiency of closed reduction that can result from the absence of visible feedback to evaluate the accuracy of the reduction in isolated zygomatic arch fractures. The aim of the present study was to evaluate the use of intraoperative 3-dimensional cone-beam computed tomography (CBCT) to improve the accuracy of reduction, by measuring the remaining cortical step and dislocation angle. We also evaluated the effect of CBCT on the need for repeat surgery. PATIENTS AND METHODS: We performed a retrospective cohort study of patients who had undergone zygomatic arch reduction surgery from January 2008 to May 2018. The patients were grouped according to the predictor variables into group A (postoperative radiologic follow-up studies) and group B (intraoperative CBCT imaging studies). The primary outcome variables were the remaining cortical step and dislocation angle compared with the ideal virtually mirrored position. These were assessed as measures of reduction accuracy. The secondary variables included age, gender, surgery duration, and fracture type. Statistical analysis was performed using a robust multiple regression analysis. RESULTS: The 45 patients were divided into 2 subgroups with 18 patients in the no intraoperative imaging (control) group and 27 patients in the intraoperative imaging group. Insufficient reduction occurred in 1 patient in the group without intraoperative imaging, leading to repeat surgery. No repeat surgery was necessary in the intraoperative imaging group. The remaining cortical step of the intraoperative imaging group was significantly lower than that of the control group (0.18 vs 2.03 mm; P < .001). For the remaining dislocation angle, similar findings were observed but without statistical significance (3.93° vs 7.75°; P = .58). CONCLUSIONS: The use of intraoperative CBCT significantly increased the accuracy of the reduction. Furthermore, the need for repeat surgery was not required for any patient in the intraoperative imaging group with CBCT-guided reduction.

Accuracy of Computer-Guided Template-Based Implant Surgery: A Computed Tomography-Based Clinical Follow-Up Study.

OBJECTIVE: The aim of this clinical study was to analyze the accuracy of computer-guided implant surgery. MATERIALS AND METHODS: Assisted by computed tomography (CT)-based planning software and navigational templates, 16 patients successfully received 26 dental implants. Each implant parameter (a-d) was calculated based on superimposed preoperative and postoperative cone beam CT scans: (a) deviation at entry point; (b) deviation at apex; (c) angular deviation; and (d) depth deviation. RESULTS: Mean central deviation at implant entry point and apex was 0.91 mm (standard error [SE] = 0.11 mm; 95% confidence interval [CI]: 0.69-1.13) and 1.22 mm (SE = 0.11 mm; 95% CI: 0.99-1.45), respectively. Mean angulation deviation was 4.11 degrees (SE = 0.52 degrees; 95% CI: 3.04-5.17) and the average depth deviation was 0.65 mm (SE = 0.11 mm; 95% CI: 0.42-0.87). For the total number of implants placed, the maximum error was 2.34 mm at entry point, 2.71 mm at apex, 9.44 degrees in angular deviation, and 2.00 mm in depth deviation. CONCLUSION: Great accuracy was reached even in advanced cases with prior bone augmentation and complex traumas. This leads to the conclusion that particularly in advanced cases, computer-guided implantation can be beneficial.

[CAD/CAM Revolution in Craniofacial Reconstruction]. / Die CAD/CAM-Revolution in der kraniofazialen Rekonstruktion.

CAD/CAM Revolution in Craniofacial Reconstruction Abstract. The face is an important part of the personality and at the same time fulfils a variety of tasks. Aesthetics and function form a unique unit. The formation of the field of oral and maxillofacial surgery began in the first decades of the last century. It includes the prevention, diagnosis, therapy and rehabilitation of diseases, injuries, malformations and changes of the complex structures of the face, oral cavity, jaw and teeth. In the meantime, oral and maxillofacial surgery has arrived in the 21st century. Today's oral and maxillofacial surgery is a link between medicine and dentistry and a protagonist in the implementation of digital workflows in clinical care. Individual solutions with patient-specific implants are the rule, computer-assisted techniques support the surgeon in the planning and performing of surgical procedures. This article intends to give you an insight into how our patients benefit from advanced technologies.

Outcome of Surgically Treated Fractures of the Condylar Process by an Endoscopic Assisted Transoral Approach.

PURPOSE: Fractures of the condylar process are frequent. Ideal management of these fractures, as discussed in the literature, is controversial. Some recent meta-analyses have favored open reduction and internal fixation using various approaches. A strictly transoral approach has been described to minimize scarring and risk of facial nerve injury but has restricted visibility. This retrospective study analyzed outcomes of patients with unilateral mandibular condyle fractures who were treated by open reduction and internal fixation through an endoscopic-assisted transoral approach. MATERIALS AND METHODS: This study included 40 patients who were operated on from January 2015 through December 2016. All patients underwent surgery for a condylar process fracture using an endoscopic-assisted transoral approach. Fracture classification, demographic, and outcome data were collected. RESULTS: Most condylar process fractures were caused by falls from a height less than 3 m. Most were condylar base fractures and classified according to Spiessl and Schroll as Classes I and II. Sixteen patients showed a preoperative malocclusion, whereas 2 patients showed a slight postoperative malocclusion. In cases in which only 1 plate could be placed, the proximal fragment was shorter. A higher Spiessl and Schroll class showed a tendency toward longer operation times. For postoperative outcomes, 1 case of temporary facial palsy was the worst complication (2.5%), 2 cases exhibited minimal occlusal interference (5%), and 1 case exhibited a deviated mouth opening (2.5%). Ramus height was restored in all cases. No chronic pain was found in any cases. CONCLUSIONS: It is feasible to treat condylar process fractures in a safe manner using a transoral approach with endoscopic assistance and angled instruments without facial scarring and at a low complication rate. The endoscope improves the restricted visibility of the transoral approach, although a learning curve is necessary. This applies especially to dislocated fractures or to fractures with a short proximal fragment.

Intraoperative 3-dimensional cone beam computed tomographic imaging during reconstruction of the zygoma and orbit.

OBJECTIVE: Fractures of the zygoma and orbit are common facial skeleton injuries. Inadequate reduction and internal fixation may result in functional and aesthetic impairment. The aim of this study was to assess the use of intraoperative 3-dimensional (3-D) cone beam computed tomography (CBCT) for determining the intraoperative revision rate and the need for additional reconstruction of the orbit. STUDY DESIGN: We conducted a retrospective analysis of 48 consecutive patients (15 females, 33 males) suffering from simple or complex zygomatic fractures, seen between June 2015 and October 2016. Intraoperative 3-D CBCT (Xoran Technologies, Ann Arbor, MI) was performed, and the intraoperative image was overlaid on the preoperative image by using iPlan software (Brainlab, Feldkirchen, Germany) for quality control. Categorical variables were cross-tabulated and compared using Fisher's exact test. P values and 95% confidence intervals were assessed. RESULTS: In 6 of 48 patients, intraoperative revision was deemed necessary on the basis of the superimposition on the preoperative images. Five of these 6 patients had comminuted fractures (P = .001). In 7 patients, the indication for orbital reconstruction was revised after intraoperative 3-D CBCT. CONCLUSIONS: Intraoperative 3-D CBCT allows for immediate revision and prevents unnecessary orbital reconstruction.

Cone Beam Computed Tomography Evaluation of the Artery in the Lateral Wall of the Maxillary Sinus: Retrospective Analysis of 602 Sinuses.

PURPOSE: This retrospective study evaluates the location of the arteries in the maxillary sinus, particularly in the middle portion, using cone beam computed tomography (CBCT) scans that can detect the lateral arteries with high reliability. METHODS: In this retrospective study, 2 experienced independent examiners evaluated 602 sinuses on CBCT scans. DISCUSSION: No significant correlation was found between the location of arteries and the patient's age, sex, or dentition. In 92.0% (P ≤ 0.001) of the sinuses, at least 1 arterial branch was detectable. CONCLUSION: Based on the CBCT scans, we found that a very high proportion of patients have the maxillary artery in their lateral sinus wall, which is important information for sinus augmentation or sinus surgery.

Comparison of preseptal and retroseptal transconjunctival approaches in patients with isolated fractures of the orbital floor.

Transconjunctival approach has become a standard procedure to access fractures of orbit and the infraorbital rim. The transconjunctival incision can be performed pre- or retroseptally. Both approaches have been described combined with modifications such as transcaruncular or detachment of the lateral canthus for wider exposure of the orbital walls and rim. Particularly concerning aesthetics, the transconjunctival approach shows advantages compared to the transcutaneous incisions, such as the transciliary and infraorbital access. Moreover, transconjunctival approach is preferred in the literature regarding lid retraction. In this study the preseptal approach is compared with the retroseptal approach concerning en- or ectropion, foreign body sensation and formation of symblepharon. In our collective complication rates were lower in the retroseptal transconjunctival group, although this was not statistically significant. Whether the preseptal or the retroseptal transconjunctival approach is selected, is rather based on the surgeon's preferences. Nevertheless, the retroseptal approach must be considered as advantageous alternative to the preseptal approach because of simpler surgical technique and the safer distance to the vulnerable lid apparatus.