Myocardial Blood Flow by Magnetic Resonance in Patients With Suspected Coronary Stenosis: Comparison to PET and Invasive Physiology.

BACKGROUND: Despite recent guideline recommendations, quantitative perfusion (QP) estimates of myocardial blood flow from cardiac magnetic resonance (CMR) have only been sparsely validated. Furthermore, the additional diagnostic value of utilizing QP in addition to the traditional visual expert interpretation of stress-perfusion CMR remains unknown. The aim was to investigate the correlation between myocardial blood flow measurements estimated by CMR, positron emission tomography, and invasive coronary thermodilution. The second aim is to investigate the diagnostic performance of CMR-QP to identify obstructive coronary artery disease (CAD). METHODS: Prospectively enrolled symptomatic patients with >50% diameter stenosis on computed tomography angiography underwent dual-bolus CMR and positron emission tomography with rest and adenosine-stress myocardial blood flow measurements. Subsequently, an invasive coronary angiography (ICA) with fractional flow reserve and thermodilution-based coronary flow reserve was performed. Obstructive CAD was defined as both anatomically severe (>70% diameter stenosis on quantitative coronary angiography) or hemodynamically obstructive (ICA with fractional flow reserve ≤0.80). RESULTS: About 359 patients completed all investigations. Myocardial blood flow and reserve measurements correlated weakly between estimates from CMR-QP, positron emission tomography, and ICA-coronary flow reserve (r<0.40 for all comparisons). In the diagnosis of anatomically severe CAD, the interpretation of CMR-QP by an expert reader improved the sensitivity in comparison to visual analysis alone (82% versus 88% [P=0.03]) without compromising specificity (77% versus 74% [P=0.28]). In the diagnosis of hemodynamically obstructive CAD, the accuracy was only moderate for a visual expert read and remained unchanged when additional CMR-QP measurements were interpreted. CONCLUSIONS: CMR-QP correlates weakly to myocardial blood flow measurements by other modalities but improves diagnosis of anatomically severe CAD. REGISTRATION: URL: https://www.clinicaltrials.gov; Unique identifier: NCT03481712.

Implementation of ultrasound-guided carpal tunnel release.

INTRODUCTION: Ultra-minimally invasive ultrasound-guided carpal tunnel release is a surgical procedure for treatment of carpal tunnel syndrome that is associated with less surgery-related morbidity and faster recovery than open surgery. The objectives of this study were to describe how the surgical technique may be acquired and to report the results obtained after implementation in a clinical setting. METHODS: The study consisted of two parts: 1) description of the surgical skills needed to perform the procedure, and 2) evaluation of the procedure in the first ten consecutively operated patients after 12-month follow-up using questionnaires and magnetic resonance imaging (MRI). RESULTS: The procedure was performed on 29 cadaveric arms and assessed regarding surgical release success and signs of iatrogenic damage. Subsequently, the procedure was performed on ten patients with carpal tunnel syndrome. The results of the six-item Carpal Tunnel Symptoms Scale (1-5) improved from 3.3 ± 0.9 (mean ± standard deviation) preoperatively to 1.2 ± 0.3, p = 0.002, after 12 months. Quick Disabilities of the Arm, Shoulder and Hand (DASH) (0-100) results improved from 33.4 ± 14.8 to 2.3 ± 4.0, p = 0.002. There were no infections or iatrogenic damage to nerves or blood vessels. CONCLUSIONS: This study presents a way to safely acquire the skills needed to perform the procedure and implement it in an out-patient setting. The results were comparable to previous findings regarding both effectiveness and safety. MRI documented the surgical gap in the transverse carpal ligament, release length, cross-sectional area changes in the carpal tunnel and median nerve, and reactive changes in the carpal tunnel. FUNDING: None. TRIAL REGISTRATION: Not relevant.

Diagnostic performance of clinical likelihood models of obstructive coronary artery disease to predict myocardial perfusion defects.

AIMS: Clinical likelihood (CL) models are designed based on a reference of coronary stenosis in patients with suspected obstructive coronary artery disease. However, a reference standard for myocardial perfusion defects (MPDs) could be more appropriate. We aimed to investigate the ability of the 2019 European Society of Cardiology pre-test probability (ESC-PTP), the risk-factor-weighted (RF-CL) model, and coronary artery calcium score-weighted (CACS-CL) model to diagnose MPDs. METHODS AND RESULTS: Symptomatic stable de novo chest pain patients (n = 3374) underwent coronary computed tomography angiography and subsequent myocardial perfusion imaging by single-photon emission computed tomography, positron emission tomography, or cardiac magnetic resonance. For all modalities, MPD was defined as coronary computed tomography angiography with suspected stenosis and stress-perfusion abnormality in ≥2 segments. The ESC-PTP was calculated based on age, sex, and symptom typicality, and the RF-CL and CACS-CL additionally included a number of risk factors and CACS. In total, 219/3374 (6.5%) patients had an MPD. Both the RF-CL and the CACS-CL classified substantially more patients to low CL (<5%) of obstructive coronary artery disease compared with the ESC-PTP (32.5 and 54.1 vs. 12.0%, P < 0.001) with preserved low prevalences of MPD (<2% for all models). Compared with the ESC-PTP [area under the receiver-operating characteristic curve (AUC) 0.74 (0.71-0.78)], the discrimination of having an MPD was higher for the CACS-CL model [AUC 0.88 (0.86-0.91), P < 0.001], while it was similar for the RF-CL model [AUC 0.73 (0.70-0.76), P = 0.32]. CONCLUSION: Compared with basic CL models, the RF-CL and CACS-CL models improve down classification of patients to a very low-risk group with a low prevalence of MPD.

Colonic volume in patients with functional constipation or irritable bowel syndrome determined by magnetic resonance imaging.

BACKGROUND: Functional constipation (FC) and irritable bowel syndrome constipation type (IBS-C) share many similarities, and it remains unknown whether they are distinct entities or part of the same spectrum of disease. Magnetic resonance imaging (MRI) allows quantification of intraluminal fecal volume. We hypothesized that colonic volumes of patients with FC would be larger than those of patients with IBS-C, and that both patient groups would have larger colonic volumes than healthy controls (HC). METHODS: Based on validated questionnaires, three groups of participants were classified into FC (n = 13), IBS-C (n = 10), and HC (n = 19). The colonic volume of each subject was determined by MRI. Stool consistency was described by the Bristol stool scale and colonic transit times were assessed with radiopaque makers. KEY RESULTS: Overall, total colonic volumes were different in the three groups, HC (median 629 ml, interquartile range (IQR)(562-868)), FC (864 ml, IQR(742-940)), and IBS-C (520 ml IQR(489-593)) (p = 0.001). Patients with IBS-C had lower colonic volumes than patients with FC (p = 0.001) and HC (p = 0.019), but there was no difference between FC and HC (p = 0.10). Stool consistency was similar in the two patient groups, but patients with FC had longer colonic transit time than those with IBS-C (117.6 h versus 43.2 h, p = 0.019). CONCLUSION: Patients with IBS-C have lower total colonic volumes and shorter colonic transit times than patients with FC. Future studies are needed to confirm that colonic volume allows objective distinction between the two conditions.

Three-dimensional liver motion tracking using real-time two-dimensional MRI.

PURPOSE: Combined magnetic resonance imaging (MRI) systems and linear accelerators for radiotherapy (MR-Linacs) are currently under development. MRI is noninvasive and nonionizing and can produce images with high soft tissue contrast. However, new tracking methods are required to obtain fast real-time spatial target localization. This study develops and evaluates a method for tracking three-dimensional (3D) respiratory liver motion in two-dimensional (2D) real-time MRI image series with high temporal and spatial resolution. METHODS: The proposed method for 3D tracking in 2D real-time MRI series has three steps: (1) Recording of a 3D MRI scan and selection of a blood vessel (or tumor) structure to be tracked in subsequent 2D MRI series. (2) Generation of a library of 2D image templates oriented parallel to the 2D MRI image series by reslicing and resampling the 3D MRI scan. (3) 3D tracking of the selected structure in each real-time 2D image by finding the template and template position that yield the highest normalized cross correlation coefficient with the image. Since the tracked structure has a known 3D position relative to each template, the selection and 2D localization of a specific template translates into quantification of both the through-plane and in-plane position of the structure. As a proof of principle, 3D tracking of liver blood vessel structures was performed in five healthy volunteers in two 5.4 Hz axial, sagittal, and coronal real-time 2D MRI series of 30 s duration. In each 2D MRI series, the 3D localization was carried out twice, using nonoverlapping template libraries, which resulted in a total of 12 estimated 3D trajectories per volunteer. Validation tests carried out to support the tracking algorithm included quantification of the breathing induced 3D liver motion and liver motion directionality for the volunteers, and comparison of 2D MRI estimated positions of a structure in a watermelon with the actual positions. RESULTS: Axial, sagittal, and coronal 2D MRI series yielded 3D respiratory motion curves for all volunteers. The motion directionality and amplitude were very similar when measured directly as in-plane motion or estimated indirectly as through-plane motion. The mean peak-to-peak breathing amplitude was 1.6 mm (left-right), 11.0 mm (craniocaudal), and 2.5 mm (anterior-posterior). The position of the watermelon structure was estimated in 2D MRI images with a root-mean-square error of 0.52 mm (in-plane) and 0.87 mm (through-plane). CONCLUSIONS: A method for 3D tracking in 2D MRI series was developed and demonstrated for liver tracking in volunteers. The method would allow real-time 3D localization with integrated MR-Linac systems.