Nickel (Ni) phytotoxicity and detoxification mechanisms: A review.

Scientists studying the environment, physiology, and biology have been particularly interested in nickel (Ni) because of its dual effects (essentiality and toxicity) on terrestrial biota. It has been reported in some studies that without an adequate supply of Ni, plants are unable to finish their life cycle. The safest Ni limit for plants is 1.5 µg g-1, while the limit for soil is between 75 and 150 µg g-1. Ni at lethal levels harms plants by interfering with a variety of physiological functions, including enzyme activity, root development, photosynthesis, and mineral uptake. This review focuses on the occurrence and phytotoxicity of Ni with respect to growth, physiological and biochemical aspects. It also delves into advanced Ni detoxification mechanisms such as cellular modifications, organic acids, and chelation of Ni by plant roots, and emphasizes the role of genes involved in Ni detoxification. The discussion has been carried out on the current state of using soil amendments and plant-microbe interactions to successfully remediate Ni from contaminated sites. This review has identified potential drawbacks and difficulties of various strategies for Ni remediation, discussed the importance of these findings for environmental authorities and decision-makers, and concluded by noting the sustainability concerns and future research needs regarding Ni remediation.

Possibility of using tannins to control greenhouse gas production during digestate storage.

The presented paper deals with the testing of a possibility to reduce emissions of undesirable greenhouse gases (CH4, CO2; NOx) and their mixture (biogas) during the storage of digestate using applications of secondary plant metabolites (tannins). The experiment was conducted in laboratory conditions in which the digestate was placed in fermentation chambers. Prior to the fermentation process, preparations were applied to the digestate, which contained tannins: Tanenol Antibotrytis (TA), Tanenol Clar (TC) and Tanenol Rouge (TR) in three concentrations (0.5, 1.0 and 2.0% w/w). The application of these preparations demonstrably affected the production of biogas and the contents of CH4, CO2 and N therein. The application of TR preparation in the concentration of 1.0% and 2.0% significantly reduced the production of biogas as compared with all variants. The preparation further inhibited the process of CH4 development. In contrast, the other preparations with the content of different kinds of TA and TC increased the production of biogas (on average by 15%), CH4 (on average by 7%) and CO2 (on average by 12%) as compared with the control variant and TR variant. These two variants reduced the concentration of N in biogas on average by 38%. Thus, the tested Tanenol tannin preparations can be used in different concentrations either to control emissions of greenhouse gases during the storage of digestate or, in case of increased production of CO2 for its reuse in order to increase methane yields in the process of anaerobic fermentation.

Cadmium Phytotoxicity, Tolerance, and Advanced Remediation Approaches in Agricultural Soils; A Comprehensive Review.

Cadmium (Cd) is a major environmental contaminant due to its widespread industrial use. Cd contamination of soil and water is rather classical but has emerged as a recent problem. Cd toxicity causes a range of damages to plants ranging from germination to yield suppression. Plant physiological functions, i.e., water interactions, essential mineral uptake, and photosynthesis, are also harmed by Cd. Plants have also shown metabolic changes because of Cd exposure either as direct impact on enzymes or other metabolites, or because of its propensity to produce reactive oxygen species, which can induce oxidative stress. In recent years, there has been increased interest in the potential of plants with ability to accumulate or stabilize Cd compounds for bioremediation of Cd pollution. Here, we critically review the chemistry of Cd and its dynamics in soil and the rhizosphere, toxic effects on plant growth, and yield formation. To conserve the environment and resources, chemical/biological remediation processes for Cd and their efficacy have been summarized in this review. Modulation of plant growth regulators such as cytokinins, ethylene, gibberellins, auxins, abscisic acid, polyamines, jasmonic acid, brassinosteroids, and nitric oxide has been highlighted. Development of plant genotypes with restricted Cd uptake and reduced accumulation in edible portions by conventional and marker-assisted breeding are also presented. In this regard, use of molecular techniques including identification of QTLs, CRISPR/Cas9, and functional genomics to enhance the adverse impacts of Cd in plants may be quite helpful. The review's results should aid in the development of novel and suitable solutions for limiting Cd bioavailability and toxicity, as well as the long-term management of Cd-polluted soils, therefore reducing environmental and human health hazards.

A Simple Method for Quantification of Polyhydroxybutyrate and Polylactic Acid Micro-Bioplastics in Soils by Evolved Gas Analysis.

Conventional plastics are being slowly replaced by biodegradable ones to prevent plastic pollution. However, in the natural environment, the biodegradation of plastics is usually slow or incomplete due to unfavorable conditions and leads to faster micro-bioplastic formation. Many analytical methods were developed to determine microplastics, but micro-bioplastics are still overlooked. This work presents a simple method for determining poly-3-hydroxybutyrate and polylactic acid micro-bioplastics in soil based on the thermogravimetry-mass spectrometry analysis of low molecular gases evolved during pyrolysis. For the method development, model soils containing different soil organic carbon contents were spiked with micro-bioplastics. Specific gaseous pyrolysis products of the analytes were identified, while the ratio of their amounts appeared to be constant above the level of detection of the suggested method. The constant ratio was explained as a lower soil influence on the evolution of the gaseous product, and it was suggested as an additional identification parameter. The advantages of the presented method are no sample pretreatment, presumably no need for an internal standard, low temperature needed for the transfer of gaseous products and the possibility of using its principles with other, cheaper detectors. The method can find application in the verification of biodegradation tests and in the monitoring of soils after the application of biodegradable products.

Nano Zero Valent Iron (nZVI) as an Amendment for Phytostabilization of Highly Multi-PTE Contaminated Soil.

In recent years, a lot of attention has been given to searching for new additives which will effectively facilitate the process of immobilizing contaminants in the soil. This work considers the role of the enhanced nano zero valent iron (nZVI) strategy in the phytostabilization of soil contaminated with potentially toxic elements (PTEs). The experiment was carried out on soil that was highly contaminated with PTEs derived from areas in which metal waste had been stored for many years. The plants used comprised a mixture of grasses-Lolium perenne L. and Festuca rubra L. To determine the effect of the nZVI on the content of PTEs in soil and plants, the samples were analyzed using flame atomic absorption spectrometry (FAAS). The addition of nZVI significantly increased average plant biomass (38%), the contents of Cu (above 2-fold), Ni (44%), Cd (29%), Pb (68%), Zn (44%), and Cr (above 2-fold) in the roots as well as the soil pH. The addition of nZVI, on the other hand, was most effective in reducing the Zn content of soil when compared to the control series. Based on the investigations conducted, the application of nZVI to soil highly contaminated with PTEs is potentially beneficial for the restoration of polluted lands.

Polluted brownfield site converted into a public urban park: A place providing ecosystem services or a hidden health threat?

The conversion of old brownfield sites into places once again serving society is becoming an upward global trend, especially in urban areas. Due to the increasingly growing pressure on the expansion of urban green spaces, such sites can become, for instance, urban parks. The aim of the study was to assess whether the solution is appropriate and if it does not pose a potential health risk. Heavy pollution of soils was found out by means of the example of the urban park newly established in a reclaimed area of a historic mining town. The high average values in the topsoil were found out mainly in As (132 mg/kg), Cd (6.8 mg/kg), Pb (535 mg/kg) and Zn (1604 mg/kg). The assessment of the non-carcinogenic health risk has revealed possible As-related adverse health effects in children even at irregular park visits. According to the carcinogenic risk assessment, As, Cd, Cr and Ni can be ranked in the category of an acceptable total risk for regulatory purposes. The health status of park vegetation as a significant component of the urban ecosystem was also assessed. Soil phytotoxicity brought about severe damage to the seedlings, with a mortality rate of up to 84% locally. The results indicate that heavily polluted brownfield sites with historic mining-related activities are not suitable for establishing urban parks even after reclamation and nature-based solutions may not be invariably appropriate. Based on the findings, the management steps that ought to be implemented in the process of brownfield redevelopment into the urban park even after its establishment have been highlighted in order to minimize the health risk to park visitors while providing the required ecosystem services by vegetation.

Insight into metal immobilization and microbial community structure in soil from a steel disposal dump phytostabilized with composted, pyrolyzed or gasified wastes.

The soil system is a key component of the environment that can serve as a sink of pollutants. Using processed waste for aided phytostabilization of metals (HMs) in contaminated soils is an attractive phytoremediation technique that integrates waste utilization and recycling. In this study, we evaluated the effect of biologically and thermally processed wastes, i.e. sewage sludge compost (CSS), poultry feather ash (AGF) and willow chip biochar (BWC), on phytostabilization of contaminated soil from a steel disposal dump. Greenhouse experiments with Lupinus luteus L. and amendments (dosage: 3.0%, w/w) were conducted for 58 days. Soil toxicity was evaluated with Ostracodtoxkit and Phytotoxkit tests. At the end of the experiment, soil pH, plant biomass yield, and HM accumulation in plant tissues were determined. HM distribution, HM stability (reduced partition index) and potential environmental risk (mRI index) in the soil were assessed. During phytostabilization, changes in the diversity of the rhizospheric bacterial community were monitored. All amendments significantly increased soil pH and biomass yield and decreased soil phytotoxicity. AGF and BWC increased accumulation of individual HMs by L. luteus roots better than CSS (Cu and Cr, and Ni and Zn, respectively). The soil amendments did not improve Pb accumulation by the roots. Improvements in HM stability depended on amendment type: Ni and Pb stability were improved by all amendments; Zn stability, by AGF, and BWC; Cd stability, by AGF; and Cr stability, by BWC. AGF reduced the mRI most effectively. Microbial diversity in amended soils increased with time of phytostabilization and was up to 9% higher in CSS amended soil than in control soil. AGF application favored the abundance of the genera Arenimonas, Brevundimonas, Gemmatimonas and Variovorax, whose metabolic potential could have contributed to the better plant growth and lower mRI in that soil. In conclusion, AGF and BWC have great potential for restoring steel disposal dump areas, and the strategies researched here can contribute to achieving targets for sustainable development.

Human health and ecological risk assessment of trace elements in urban soils of 101 cities in China: A meta-analysis.

Urban soils pollution by trace elements arouses the growing interest in China. The aim of this study was to assess urban soil pollution by As, Cd, Cr, Cu, Hg, Ni, Pb and Zn in China and the possible impacts on urban inhabitants and urban green spaces (UGS). Data from more than 17,000 samples were applied to characterize the status of 101 cities. The pollution assessment proved that 11% of the cities are heavily polluted. According to the Hazard Index, the value of risk for the infant population in 15 cities exceed the standardly accepted tolerable levels. The carcinogenic risk assessment demonstrated the potential threat in the cities with the total population approximately 20,566,900. Cr and As were detected to be the most hazardous elements. UGS may be seriously threatened by trace elements toxicity in 38 cities. Cd was found to be the riskiest element for UGS. Ecosystem services of UGS can be significantly disrupted under the current situation in China and their status is expected to deteriorate in the future. For this reason, it is essential to alter the policy of the urbanization process and develop functional concepts of urban green infrastructures adapted to the high level of contamination which shall improve human well-being in China.

Effect of Cadmium-Tolerant Rhizobacteria on Growth Attributes and Chlorophyll Contents of Bitter Gourd under Cadmium Toxicity.

Cadmium (Cd) is one of the heavy metals that negatively affects the growth of plants. High solubilization in water leads Cd to enter into plants quite easily, thus decreasing seed germination, photosynthesis, and transpiration. It also shows an antagonistic effect with many of the plants' nutrients like Mn, Ca, K, Mg and Fe. Nowadays, inoculation of plants with ACC deaminase (ACCD) rhizobacteria to mitigate Cd's adverse effects has drawn the attention of environmental microbiologists. The rhizobacteria secrete organic compounds that can immobilize Cd in soil. Therefore, this study was accomplished to investigate the effect of ACCD plant growth promoting rhizobacteria (PGPR) on the bitter gourd under Cd stress. There were six treatments consisting of two ACCD PGPR (Stenotrophomonas maltophilia and Agrobacterium fabrum) strains and inorganic fertilizers at two levels of Cd, i.e., 2 (Cd2) and 5 mg kg-1 soil (Cd5). The results showed A. fabrum with the recommended NPK fertilizer (RNPKF) significantly increased the vine length (48 and 55%), fresh weight (24 and 22%), and contents of chlorophyll a (79 and 50%), chlorophyll b (30 and 33%) and total chlorophyll (61 and 36%), over control at the two Cd levels i.e., Cd2 and Cd5, respectively. In conclusion, the recommended NPK fertilizer + A. fabrum combination is a very effective treatment with which to immobilize Cd in soil for the improvement of bitter gourd growth.

Assessment of phytotoxicity, environmental and health risks of historical urban park soils.

Urban soil areas can be contaminated with potentially dangerous heavy metals (HM), which might have got there by means of the human activity. The aim of the present study was to determine the contamination level of the city park soils and its impact on urban ecosystem. The indices assessing soil contamination such as Enrichment Factor (EF), Geoaccumulation Index (Igeo), Nemerow Pollution Index (IPIN), and indices assessing health risks, namely Hazard Index (HI) and Carcinogenic Risk (CR), have been calculated. Furthermore, the phytotoxic effect of the soil samples has been determined. The soil contains in average 58.6 mg/kg Zn, 0.3 mg/kg Cd, 27.2 mg/kg Pb and 16.6 mg/kg Cu. Based on EF index, it has been confirmed that the increased amounts of Zn, Cd and Pb in the soil are of the anthropogenic origin. The soil may be classified as moderately to strongly polluted in the case of Zn and Pb according to Igeo. Nevertheless, soil contamination in the park is at a safe level as per IPIN. Based on HI and CR indices, it is possible to state that the soil in the park does not pose any health risks. Subject to the outcomes of the toxicity test, the concentrations of HMs found out in the soils are not inhibitory for plants.

Iron Oxide Nanoparticles: Innovative Tool in Cancer Diagnosis and Therapy.

Although cancer is one of the most dangerous and the second most lethal disease in the world, current therapy including surgery, chemotherapy, radiotherapy, etc., is highly insufficient not in the view of therapy success rate or the amount of side effects. Accordingly, procedures with better outcomes are highly desirable. Iron oxide nanoparticles (IONPs) present an innovative tool-ideal for innovation and implementation into practice. This review is focused on summarizing some well-known facts about pharmacokinetics, toxicity, and the types of IONPs, and furthermore, provides a survey of their use in cancer diagnosis and therapy.

Anticarcinogenic Effect of Spices Due to Phenolic and Flavonoid Compounds-In Vitro Evaluation on Prostate Cells.

This study shows the effects of spices, and their phenolic and flavonoid compounds, on prostate cell lines (PNT1A, 22RV1 and PC3). The results of an MTT assay on extracts from eight spices revealed the strongest inhibitory effects were from black pepper and caraway seed extracts. The strongest inhibitory effect on prostatic cells was observed after the application of extracts of spices in concentration of 12.5 mg·mL-1. An LC/MS analysis identified that the most abundant phenolic and flavonoid compounds in black pepper are 3,4-dihydroxybenzaldehyde and naringenin chalcone, while the most abundant phenolic and flavonoid compounds in caraway seeds are neochlorogenic acid and apigenin. Using an MTT assay for the phenolic and flavonoid compounds from spices, we identified the IC50 value of ~1 mmol·L-1 PNT1A. The scratch test demonstrated that the most potent inhibitory effect on PNT1A, 22RV1 and PC3 cells is from the naringenin chalcone contained in black pepper. From the spectrum of compounds assessed, the naringenin chalcone contained in black pepper was identified as the most potent inhibitor of the growth of prostate cells.

Amalgam Electrode-Based Electrochemical Detector for On-Site Direct Determination of Cadmium(II) and Lead(II) from Soils.

Toxic metal contamination of the environment is a global issue. In this paper, we present a low-cost and rapid production of amalgam electrodes used for determination of Cd(II) and Pb(II) in environmental samples (soils and wastewaters) by on-site analysis using difference pulse voltammetry. Changes in the electrochemical signals were recorded with a miniaturized potentiostat (width: 80 mm, depth: 54 mm, height: 23 mm) and a portable computer. The limit of detection (LOD) was calculated for the geometric surface of the working electrode 15 mm² that can be varied as required for analysis. The LODs were 80 ng·mL-1 for Cd(II) and 50 ng·mL-1 for Pb(II), relative standard deviation, RSD ≤ 8% (n = 3). The area of interest (Dolni Rozinka, Czech Republic) was selected because there is a deposit of uranium ore and extreme anthropogenic activity. Environmental samples were taken directly on-site and immediately analysed. Duration of a single analysis was approximately two minutes. The average concentrations of Cd(II) and Pb(II) in this area were below the global average. The obtained values were verified (correlated) by standard electrochemical methods based on hanging drop electrodes and were in good agreement. The advantages of this method are its cost and time effectivity (approximately two minutes per one sample) with direct analysis of turbid samples (soil leach) in a 2 M HNO3 environment. This type of sample cannot be analyzed using the classical analytical methods without pretreatment.

Size-related cytotoxicological aspects of polyvinylpyrrolidone-capped platinum nanoparticles.

The nanotechnological concept is based on size-dependent properties of particles in the 1-100 nm range. Nevertheless, the connection between their size and effect is still not clear. Thus, we focused on reductive colloidal synthesis, characterization and biological testing of Pt nanoparticles (PtNPs) capped with biocompatible polymer polyvinylpyrrolidone (PVP). Synthesized PtNPs were of 3 different primary sizes (approx. ∼10; ∼14 and > 20 nm) and demonstrated exceptional haemocompatibility. In vitro treatment of three different types of malignant cells (prostate - LNCaP, breast - MDA-MB-231 and neuroblastoma - GI-ME-N) revealed that even marginal differences in PtNPs diameter resulted in changes in their cytotoxicity. The highest cytotoxicity was observed using the smallest PtNPs-10, where 24IC50 was lower (3.1-6.2 µg/mL) than for cisplatin (8.1-19.8 µg/mL). In contrast to MDA-MB-231 and LNCaP cells, in GI-ME-N cells PtNPs caused noticeable changes in their cellular structure without influencing their viability. Post-exposure analyses revealed that PtNPs-29 and PtNPs-40 were capable of forming considerably higher amount of reactive oxygen species with consequent stimulation of expression of metallothionein (MT1/2 and MT3), at both mRNA and protein level. Overall, our pilot study demonstrates that in the nanoscaled world even the smallest differences can have crucial biological effect.

Comparative study on toxicity of extracellularly biosynthesized and laboratory synthesized CdTe quantum dots.

Nanobiosynthesis belongs to the most recent methods for synthesis of nanoparticles. This type of synthesis provides many advantages including the uniformity in particle shape and size. The biosynthesis has also a significant advantage regarding chemical properties of the obtained particles. In this study, we characterized the basic properties and composition of quantum dots (QDs), obtained by the extracellular biosynthesis by Escherichia coli. Furthermore, the toxicity of the biosynthesized QDs was compared to QDs prepared by microwave synthesis. The obtained results revealed the presence of cyan CdTe QDs after removal of substantial amounts of organic compounds, which stabilized the nanoparticle surface. QDs toxicity was evaluated using three cell lines Human Foreskin Fibroblast (HFF), Human Prostate Cancer cells (PC-3) and Breast Cancer cells (MCF-7) and the MTT assay. The test revealed differences in the toxicity between variants of QDs, varying about 10% in the HFF and 30% in the MCF-7 cell lines. The toxicity of the biosynthesized QDs to the PC-3 cell lines was about 35% lower in comparison with the QDs prepared by microwave synthesis.