Insight into purification of monoclonal antibodies in industrial columns via studies of Protein A binding capacity by in situ ATR-FTIR spectroscopy.

Therapeutic monoclonal antibodies (mAbs) are effective treatments for a range of cancers and other serious diseases, however mAb treatments cost on average ∼$100 000 per year per patient, limiting their use. Currently, industry favours Protein A affinity chromatography (PrAc) as the key step in downstream processing of mAbs. This step, although highly efficient, represents a significant mAb production cost. Fouling of the Protein A column and Protein A ligand leaching contribute to the cost of mAb production by shortening the life span of the resin. In this study, we assessed the performance of used PrAc resin recovered from the middle inlet, center and outlet as well as the side inlet of a pilot-scale industrial column. We used a combination of static binding capacity (SBC) analysis and Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy to explore the used resin samples. SBC analysis demonstrated that resin from the inlet of the column had lower binding capacity than resin from the column outlet. ATR-FTIR spectroscopy with PLS (partial least square) analysis confirmed the results obtained from SBC analysis. Importantly, in situ ATR-FTIR spectroscopy also allowed both measurement of the concentration and assessment of the conformational state of the bound Protein A. Our results reveal that PrAc resin degradation after use is dependent on column location and that neither Protein A ligand leaching nor denaturation are responsible for binding capacity loss.

ATR-FTIR spectroscopy and spectroscopic imaging to investigate the behaviour of proteins subjected to freeze-thaw cycles in droplets, wells, and under flow.

Biopharmaceuticals are used to treat a range of diseases from arthritis to cancer, however, since the advent of these highly specific, effective drugs, there have been challenges involved in their production. The most common biopharmaceuticals, monoclonal antibodies (mAbs), are vulnerable to aggregation and precipitation during processing. Freeze thaw cycles (FTCs), which can be required for storage and transportation, can lead to a substantial loss of product, and contributes to the high cost of antibody production. It is therefore necessary to monitor aggregation levels at susceptible points in the production pathway, such as during purification and transportation, thus contributing to a fuller understanding of mAb aggregation and providing a basis for rational optimisation of the production process. This paper uses attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and spectroscopic imaging to investigate the effect of these potentially detrimental FTCs on protein secondary structure in both static wells and under flowing conditions, using lysozyme as a model protein. The results revealed that the amount of protein close to the surface of the ATR crystal, and hence level of aggregates, increased with increasing FTCs. This was observed both within wells and under flow conditions, using conventional ATR-FTIR spectroscopy and ATR-FTIR spectroscopic imaging. Interestingly, we also observed changes in the Amide I band shape indicating an increase in ß-sheet contribution, and therefore an increase in aggregates, with increasing number of FTCs. These results show for the first time how ATR-FTIR spectroscopy can be successfully applied to study the effect of FTC cycles on protein samples. This could have numerous broader applications, such as in biopharmaceutical production and rapid diagnostic testing.

ATR-FTIR spectroscopy and spectroscopic imaging for the analysis of biopharmaceuticals.

Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy is a label-free, non-destructive technique that can be applied to a vast range of biological applications, from imaging cancer tissues and live cells, to determining protein content and protein secondary structure composition. This review summarises the recent advances in applications of ATR-FTIR spectroscopy to biopharmaceuticals, the application of this technique to biosimilars, and the current uses of FTIR spectroscopy in biopharmaceutical production. We discuss the use of ATR-FTIR spectroscopic imaging to investigate biopharmaceuticals, and finally, give an outlook on the possible future developments and applications of ATR-FTIR spectroscopy and spectroscopic imaging to this field. Throughout the review comparisons will be made between FTIR spectroscopy and alternative analytical techniques, and areas will be identified where FTIR spectroscopy could perhaps offer a better alternative in future studies. This review focuses on the most recent advances in the field of using ATR-FTIR spectroscopy and spectroscopic imaging to characterise and evaluate biopharmaceuticals, both in industrial and academic research based environments.

Highly Branched Pentasaccharide-Bearing Amphiphiles for Membrane Protein Studies.

Detergents are essential tools for membrane protein manipulation. Micelles formed by detergent molecules have the ability to encapsulate the hydrophobic domains of membrane proteins. The resulting protein-detergent complexes (PDCs) are compatible with the polar environments of aqueous media, making structural and functional analysis feasible. Although a number of novel agents have been developed to overcome the limitations of conventional detergents, most have traditional head groups such as glucoside or maltoside. In this study, we introduce a class of amphiphiles, the PSA/Es with a novel highly branched pentasaccharide hydrophilic group. The PSA/Es conferred markedly increased stability to a diverse range of membrane proteins compared to conventional detergents, indicating a positive role for the new hydrophilic group in maintaining the native protein integrity. In addition, PDCs formed by PSA/Es were smaller and more suitable for electron microscopic analysis than those formed by DDM, indicating that the new agents have significant potential for the structure-function studies of membrane proteins.

SARM modulates MyD88-mediated TLR activation through BB-loop dependent TIR-TIR interactions.

Toll-like receptors (TLRs) recognise invading pathogens and initiate an innate immune response by recruiting intracellular adaptor proteins via heterotypic Toll/interleukin-1 receptor (TIR) domain interactions. Of the five TIR domain-containing adaptor proteins identified, Sterile α- and armadillo-motif-containing protein (SARM) is functionally unique; suppressing immune signalling instead of promoting it. Here we demonstrate that the recombinantly expressed and purified SARM TIR domain interacts with both the major human TLR adaptors, MyD88 and TRIF. A single glycine residue located in the BB-loop of the SARM TIR domain, G601, was identified as essential for interaction. A short peptide derived from this motif was also found to interact with MyD88 in vitro. SARM expression in HEK293 cells was found to significantly suppress lipopolysaccharide (LPS)-mediated upregulation of inflammatory cytokines, IL-8 and TNF-α, an effect lost in the G601A mutant. The same result was observed with cytokine activation initiated by MyD88 expression and stimulation of TLR2 with lipoteichoic acid (LTA), suggesting that SARM is capable of suppressing both TRIF- and MyD88- dependent TLR signalling. Our findings indicate that SARM acts on a broader set of target proteins than previously thought, and that the BB-loop motif is functionally important, giving further insight into the endogenous mechanisms used to suppress inflammation in immune cells.

Heterologous expression of G-protein-coupled receptors in yeast.

Heterologous yeast expression systems have been successfully used for the production of G-protein-coupled receptors (GPCRs) for both structural and functional studies. Yeast combine comparatively low cost and short culture times with straightforward generation of expression clones. They also perform some key posttranslational modifications not possible in bacterial systems. There are two major yeast expression systems, Pichia pastoris and Saccharomyces cerevisiae, both of which have been used for the production of GPCRs. P. pastoris has a proven track record for the production of large amounts of GPCR for structural studies. High-resolution crystal structures of both the adenosine A2A and the histamine H1 receptors have been obtained using protein expressed in this system. S. cerevisiae is relatively easy to engineer and this has resulted in the development of sophisticated tools for the functional characterization of GPCRs. In this chapter, we provide protocols for both large-scale receptor expression in P. pastoris for structural studies and small-scale receptor expression in S. cerevisiae for functional characterization. In both cases, the receptor used is the human adenosine A2A receptor. The results that both we and others have obtained using these protocols show the wide utility of the yeast expression systems for the production of GPCRs.

Arginine 199 and leucine 208 have key roles in the control of adenosine A2A receptor signalling function.

One successful approach to obtaining high-resolution crystal structures of G-protein coupled receptors is the introduction of thermostabilising mutations within the receptor. This technique allows the generation of receptor constructs stabilised into different conformations suitable for structural studies. Previously, we functionally characterised a number of mutants of the adenosine A2A receptor, thermostabilised either in an agonist or antagonist conformation, using a yeast cell growth assay and demonstrated that there is a correlation between thermostability and loss of constitutive activity. Here we report the functional characterisation of 30 mutants intermediate between the Rag23 (agonist conformation mutant) and the wild-type receptor using the same yeast signalling assay with the aim of gaining greater insight into the role individual amino acids have in receptor function. The data showed that R199 and L208 have important roles in receptor function; substituting either of these residues for alanine abolishes constitutive activity. In addition, the R199A mutation markedly reduces receptor potency while L208A reduces receptor efficacy. A184L and L272A mutations also reduce constitutive activity and potency although to a lesser extent than the R199A and L208A. In contrast, the F79A mutation increases constitutive activity, potency and efficacy of the receptor. These findings shed new light on the role individual residues have on stability of the receptor and also provide some clues as to the regions of the protein responsible for constitutive activity. Furthermore, the available adenosine A2A receptor structures have allowed us to put our findings into a structural context.

UXT plays dual opposing roles on SARM-induced apoptosis.

Apoptosis is a vital defense mechanism for the clearance of infected cells. Ubiquitously expressed transcript (UXT), which exists in two isoforms (V1 and V2), interact with both apoptotic and cellular proteins. By yeast two-hybrid analysis, we found that UXT interacts with SARM (sterile α and HEAT armadillo motif-containing protein). Since SARM is a TLR adaptor which induces intrinsic apoptosis following immune activation, we were prompted to query whether UXT and SARM might co-regulate apoptosis. We found that the UXT isoforms elicit dual opposing regulatory effects on SARM-induced apoptosis; while UXT V1, co-expressed with SARM, caused a reduction in caspase 8 activity, UXT V2 strongly increased caspase 8 activity and enhanced SARM-induced apoptosis by activating the extrinsic pathway and depolarizing the mitochondria.

Human and viral Golgi anti-apoptotic proteins (GAAPs) oligomerize via different mechanisms and monomeric GAAP inhibits apoptosis and modulates calcium.

Golgi anti-apoptotic proteins (GAAPs) are hydrophobic proteins resident in membranes of the Golgi complex. They protect cells from a range of apoptotic stimuli, reduce the Ca(2+) content of intracellular stores, and regulate Ca(2+) fluxes. GAAP was discovered in camelpox virus, but it is highly conserved throughout evolution and encoded by all eukaryote genomes examined. GAAPs are part of the transmembrane Bax inhibitor-containing motif (TMBIM) family that also includes other anti-apoptotic and Ca(2+)-modulating membrane proteins. Most TMBIM members show multiple bands when analyzed by SDS-PAGE, suggesting that they may be oligomeric. However, the molecular mechanisms of oligomerization, the native state of GAAPs in living cells and the functional significance of oligomerization have not been addressed. TMBIM members are thought to have evolved from an ancestral GAAP. Two different GAAPs, human (h) and viral (v)GAAP were therefore selected as models to examine oligomerization of TMBIM family members. We show that both hGAAP and vGAAP in their native states form oligomers and that oligomerization is pH-dependent. Surprisingly, hGAAP and vGAAP do not share the same oligomerization mechanism. Oligomerization of hGAAP is independent of cysteines, but oligomerization of vGAAP depends on cysteines 9 and 60. A mutant vGAAP that is unable to oligomerize revealed that monomeric vGAAP retains both its anti-apoptotic function and its effect on intracellular Ca(2+) stores. In conclusion, GAAP can oligomerize in a pH-regulated manner, and monomeric GAAP is functional.

Loss of constitutive activity is correlated with increased thermostability of the human adenosine A2A receptor.

BACKGROUND AND PURPOSE: Thermostabilization by mutagenesis is one method which has facilitated the determination of high-resolution structures of the adenosine A2A receptor (A(2A)R). Sets of mutations were identified, which both thermostabilized the receptor and resulted in preferential agonist (Rag23 mutant) or antagonist (Rant5 and Rant21) binding forms as assessed by radioligand binding analysis. While the ligand-binding profiles of these mutants are known, the effects these mutations have on receptor activation and downstream signalling are less well characterized. EXPERIMENTAL APPROACH: Here we have investigated the effects of the thermostabilizing mutations on receptor activation using a yeast cell growth assay. The assay employs an engineered Saccharomyces cerevisiae, MMY24, which couples receptor activation to cell growth. KEY RESULTS: Analysis of the receptor activation profile revealed that the wild-type (WT) A(2A)R had considerable constitutive activity. In contrast, the Rag23, Rant5 and Rant21 thermostabilized mutants all exhibited no constitutive activity. While the preferentially antagonist-binding mutants Rant5 and Rant21 showed a complete lack of agonist-induced activity, the Rag23 mutant showed high levels of agonist-induced receptor activity. Further analysis using a mutant intermediate between Rag23 and WT indicated that the loss of constitutive activity observed in the agonist responsive mutants was not due to reduced G-protein coupling. CONCLUSIONS AND IMPLICATIONS: The loss of constitutive activity may be an important feature of these thermostabilized GPCRs. In addition, the constitutively active and agonist-induced active conformations of the A(2A)R are distinct.

Large-scale production of membrane proteins in Pichia pastoris: the production of G protein-coupled receptors as a case study.

One of the major advantages of using Pichia pastoris is that it is readily adapted to large-scale culture in bioreactors. Bioreactors allow precise regulation of cell growth parameters increasing both yields and reproducibility of the culture. P. pastoris cultures grow to very high cell densities which helps minimise culture volume and facilitates downstream processing of the sample. Here, we provide protocols for the large-scale production of the human adenosine A(2A) receptor (A(2A)R) and provide some details of how bioreactor cultures can be used for optimisation of expression of the human dopamine D2 receptor (D2DR).

Radioligand binding analysis as a tool for quality control of GPCR production for structural characterization: adenosine A(2a)R as a template for study.

Functional characterization of G protein-coupled receptors is essential to ascertain the suitability of a protein target for downstream studies and to help develop optimal expression and isolation procedures. Radioligand binding analysis is a well-established technique, which allows direct measurement of the amount of functional receptor in a sample. It can be readily applied to both membrane-bound and soluble receptor samples and is an ideal method for monitoring the amount of functional protein at each stage in the expression and isolation process. This unit presents protocols for the radioligand binding analysis of the human adenosine A(2a) receptor and provides examples of how these assays can be used at several stages to help optimize expression, solubilization, and isolation procedures.

Purification of the human G protein-coupled receptor adenosine A(2a)R in a stable and functional form expressed in Pichia pastoris.

The isolation of membrane proteins with the aim of producing highly pure, homogeneous, stable, and functional material remains challenging, and it is often necessary to develop protein-specific purification protocols by trial and error. One key tool that is required in the development of a suitable protocol is a functional assay. This unit describes a range of different protocols for isolation of the human adenosine A2a receptor (A(2a)R). These protocols show the importance of developing a robust method for comparing the quality of protein obtained by a combination of biophysical analyses including SDS-PAGE, analytical size-exclusion chromatography, and functional analysis. One of the keys to isolating and maintaining a functional receptor, found not only in the optimal protocol described here but in other published examples, is that there should be no more than two chromatographic steps.

A purified C-terminally truncated human adenosine A(2A) receptor construct is functionally stable and degradation resistant.

Recent high resolution structures of modified G-protein coupled receptors (GPCRs) have provided major insight into the mechanisms of receptor-ligand binding. However understanding of the complete mechanism of GPCR function remains limited. This study characterised C-terminally truncated versions of the human adenosine A(2A) receptor (A(2A)R) with a view to producing protein suitable for structural studies. The constructs terminated at residue A316, removing the intracellular C-terminal tail, or V334, producing a C-terminal tail equivalent in length to that of rhodopsin. Higher levels of functional receptor before and after solubilisation were obtained for both C-terminally truncated constructs compared to the wild-type receptor (WT) as assessed by radioligand binding analysis using [(3)H]ZM241385. The construct which yielded the highest level of functional receptor, V334 A(2A)R, was purified in DDM to high homogeneity with a final yield of 2 mg/L. Binding analysis revealed that the purified receptor had a specific activity of 20.2+/-1.2 nmol/mg, close to the theoretical maximum. Pure V334 A(2A)R was resistant to degradation over 15 days when stored at 4 degrees C or 20 degrees C and showed remarkable functional stability when stored at 4 degrees C, retaining 84% of initial functionality after 30 days. This construct is an excellent candidate for structural studies.

Large-scale functional expression of WT and truncated human adenosine A2A receptor in Pichia pastoris bioreactor cultures.

BACKGROUND: The large-scale production of G-protein coupled receptors (GPCRs) for functional and structural studies remains a challenge. Recent successes have been made in the expression of a range of GPCRs using Pichia pastoris as an expression host. P. pastoris has a number of advantages over other expression systems including ability to post-translationally modify expressed proteins, relative low cost for production and ability to grow to very high cell densities. Several previous studies have described the expression of GPCRs in P. pastoris using shaker flasks, which allow culturing of small volumes (500 ml) with moderate cell densities (OD600 ~15). The use of bioreactors, which allow straightforward culturing of large volumes, together with optimal control of growth parameters including pH and dissolved oxygen to maximise cell densities and expression of the target receptors, are an attractive alternative. The aim of this study was to compare the levels of expression of the human Adenosine 2A receptor (A2AR) in P. pastoris under control of a methanol-inducible promoter in both flask and bioreactor cultures. RESULTS: Bioreactor cultures yielded an approximately five times increase in cell density (OD600 ~75) compared to flask cultures prior to induction and a doubling in functional expression level per mg of membrane protein, representing a significant optimisation. Furthermore, analysis of a C-terminally truncated A2AR, terminating at residue V334 yielded the highest levels (200 pmol/mg) so far reported for expression of this receptor in P. pastoris. This truncated form of the receptor was also revealed to be resistant to C-terminal degradation in contrast to the WT A2AR, and therefore more suitable for further functional and structural studies. CONCLUSION: Large-scale expression of the A2AR in P. pastoris bioreactor cultures results in significant increases in functional expression compared to traditional flask cultures.

Architecture of NarGH reveals a structural classification of Mo-bisMGD enzymes.

The structure of the catalytic and electron-transfer subunits (NarGH) of the integral membrane protein, respiratory nitrate reductase (Nar) has been determined to 2.0 A resolution revealing the molecular architecture of this Mo-bisMGD (molybdopterin-guanine-dinucleotide) containing enzyme which includes a previously undetected FeS cluster. Nar, together with the related enzyme formate dehydrogenase (Fdh-N), is a key enzyme in the generation of proton motive force across the membrane in Escherichia coli nitrate respiration. A comparative study revealed that Nar and Fdh-N employ different approaches for acquiring substrate, reflecting different catalytic mechanisms. Nar uses a very narrow and nonpolar substrate-conducting cavity with a nonspecific substrate binding site, whereas Fdh-N accommodates a wider, positively charged substrate-conducting cavity with a more specific substrate binding site. The Nar structure also demonstrates the first example of an Asp side chain acting as a Mo ligand providing a structural basis for the classification of Mo-bisMGD enzymes.