Modulation of diabetic wound healing using carbon monoxide gas-entrapping materials.

Diabetic wound healing is uniquely challenging to manage due to chronic inflammation and heightened microbial growth from elevated interstitial glucose. Carbon monoxide (CO), widely acknowledged as a toxic gas, is also known to provide unique therapeutic immune modulating effects. To facilitate delivery of CO, we have designed hyaluronic acid-based CO-gas-entrapping materials (CO-GEMs) for topical and prolonged gas delivery to the wound bed. We demonstrate that CO-GEMs promote the healing response in murine diabetic wound models (full-thickness wounds and pressure ulcers) compared to N2-GEMs and untreated controls.

Advancing Resident Education: Experiential Success in the Creation of a Comprehensive Clinical Didactic Series in Radiation Oncology.

Purpose: An effective didactic curriculum is a cornerstone for a successful residency program, as it is the basis upon which residents acquire the necessary knowledge and perspective to provide high-quality, evidence-based care. Here we describe our success in creating a standardized curriculum in clinical radiation oncology - one that was well-received and led to significantly improved performance on the national in-service examination. Methods and Materials: One-hundred and fifty topics were outlined in accordance with the American Board of Radiology; to accommodate this breadth of material, didactic frequency was increased from biweekly to daily. As a clinical correlate to these sessions, a teaching library of over 100 real-world cases was compiled for individual learning. Finally, comprehensive dosimetric constraints were compiled to aid residents in radiation therapy plan evaluation. To evaluate these curricular changes, anonymous questionnaires were provided to all residents and faculty, and de-identified resident clinical performance from the annual in-service examination was analyzed. Results: Before the introduction of the standardized curriculum, the mean clinical percentage on the in-service examination was 46%, equivalent to the 17th percentile. Within 2 years of implementation of the new curriculum, both the mean percentage and percentile were significantly improved, with the mean percentage correct at 69.3% and the mean percentile at the 59th percentile (P < .001 and P = .034, respectively). Feedback showed the curriculum to be well-received and used frequently outside of standard didactic hours. Conclusions: This is the first report of the creation of a standardized curriculum and outcomes in radiation oncology. Although there are certainly developmental challenges, addressing these barriers creates an education model that effectively imparts knowledge, fosters multidisciplinary thinking, and prepares residents for the diverse challenges of clinical practice. We present our institutional experience with the intent of publishing this curriculum on a national platform in the coming years.

Impact of formulation on solid oxygen-entrapping materials to overcome tumor hypoxia.

Tumor hypoxia, resulting from rapid tumor growth and aberrant vascular proliferation, exacerbates tumor aggressiveness and resistance to treatments like radiation and chemotherapy. To increase tumor oxygenation, we developed solid oxygen gas-entrapping materials (O2-GeMs), which were modeled after clinical brachytherapy implants, for direct tumor implantation. The objective of this study was to investigate the impact different formulations of solid O2-GeMs have on the entrapment and delivery of oxygen. Using a Parr reactor, we fabricated solid O2-GeMs using carbohydrate-based formulations used in the confectionary industry. In evaluating solid O2-GeMs manufactured from different sugars, the sucrose-containing formulation exhibited the highest oxygen concentration at 1 mg/g, as well as the fastest dissolution rate. The addition of a surface coating to the solid O2-GeMs, especially polycaprolactone, effectively prolonged the dissolution of the solid O2-GeMs. In vivo evaluation confirmed robust insertion and positioning of O2-GeMs in a malignant peripheral nerve sheath tumor, highlighting potential clinical applications.

Oral Carbon Monoxide Enhances Autophagy Modulation in Prostate, Pancreatic, and Lung Cancers.

Modulation of autophagy, specifically its inhibition, stands to transform the capacity to effectively treat a broad range of cancers. However, the clinical efficacy of autophagy inhibitors has been inconsistent. To delineate clinical and epidemiological features associated with autophagy inhibition and a positive oncological clinical response, a retrospective analysis of patients is conducted treated with hydroxychloroquine, a known autophagy inhibitor. A direct correlation between smoking status and inhibition of autophagy with hydroxychloroquine is identified. Recognizing that smoking is associated with elevated circulating levels of carbon monoxide (CO), it is hypothesized that supplemental CO can amplify autophagy inhibition. A novel, gas-entrapping material containing CO in a pre-clinical model is applied and demonstrated that CO can dramatically increase the cytotoxicity of autophagy inhibitors and significantly inhibit the growth of tumors when used in combination. These data support the notion that safe, therapeutic levels of CO can markedly enhance the efficacy of autophagy inhibitors, opening a promising new frontier in the quest to improve cancer therapies.

Low-Cost, High-Pressure-Synthesized Oxygen-Entrapping Materials to Improve Treatment of Solid Tumors.

Tumor hypoxia drives resistance to many cancer therapies, including radiotherapy and chemotherapy. Methods that increase tumor oxygen pressures, such as hyperbaric oxygen therapy and microbubble infusion, are utilized to improve the responses to current standard-of-care therapies. However, key obstacles remain, in particular delivery of oxygen at the appropriate dose and with optimal pharmacokinetics. Toward overcoming these hurdles, gas-entrapping materials (GeMs) that are capable of tunable oxygen release are formulated. It is shown that injection or implantation of these materials into tumors can mitigate tumor hypoxia by delivering oxygen locally and that these GeMs enhance responsiveness to radiation and chemotherapy in multiple tumor types. This paper also demonstrates, by comparing an oxygen (O2 )-GeM to a sham GeM, that the former generates an antitumorigenic and immunogenic tumor microenvironment in malignant peripheral nerve sheath tumors. Collectively the results indicate that the use of O2 -GeMs is promising as an adjunctive strategy for the treatment of solid tumors.

Case report: Robotically visualized and biopsy-confirmed peritoneal carcinomatosis as initial identification of metastatic prostate adenocarcinoma in a patient with a history of prostatic urethral lift.

Background: Peritoneal carcinomatosis is a particularly rare presentation of prostate cancer. Here we report a rare clinical case of surgically identified peritoneal carcinomatosis at the time of a planned robotic prostatectomy in a patient with a history of prostatic urethral lift procedure. Case presentation: A 72-year-old man, with a history of urinary retention managed with tamsulosin, presented to his local urologist. Prostatic urethral lift procedures were performed for symptom management. After a definitive uptrend in his prostate-specific antigen (PSA) values, a biopsy was obtained, which demonstrated prostate adenocarcinoma. On presurgical multidisciplinary review, it was presumed that he had very high-risk localized prostate cancer. However, upon initiation of robotically assisted laparoscopic radical prostatectomy (RALP), he was noted to have numerous punctate white plaques on the peritoneum; biopsy of these lesions confirmed metastatic disease-for which the patient was starting on triple therapy per the PEACE-1 trial. The PSA level responded appropriately, decreasing from 16.8 to 0.08. Genetic testing was performed and returned negative for any clinically significant mutations. Conclusion: Our patient, diagnosed with peritoneal carcinomatosis during a planned RALP, highlights the importance of vigilant laparoscopic exam prior to this prostatectomy. Multidisciplinary discussion is crucial for individualized and optimal treatment planning.

Continuous liquid interface production of 3D printed drug-loaded spacers to improve prostate cancer brachytherapy treatment.

Brachytherapy, which is the placement of radioactive seeds directly into tissue such as the prostate, is an important curative treatment for prostate cancer. By delivering a high dose of radiation from within the prostate gland, brachytherapy is an effective method of killing prostate cancer cells while limiting radiation dose to normal tissue. The main shortcomings of this treatment are: less efficacy against high grade tumor cells, acute urinary retention, and sub-acute urinary frequency and urgency. One strategy to improve brachytherapy is to incorporate therapeutics into brachytherapy. Drugs, such as docetaxel, can improve therapeutic efficacy, and dexamethasone is known to decrease urinary side effects. However, both therapeutics have high systemic side effects. To overcome this challenge, we hypothesized that we can incorporate therapeutics into the inert polymer spacers that are used to correctly space brachytherapy seeds during brachytherapy to enable local drug delivery. To accomplish this, we engineered 3D printed drug-loaded brachytherapy spacers using continuous liquid interface production (CLIP) with different surface patterns to control drug release. These devices have the same physical size as existing spacers, allowing them to easily replace commercial spacers. We examined these drug-loaded spacers using docetaxel and dexamethasone as model drugs in a murine model of prostate cancer. We found that drug-loaded spacers led to higher therapeutic efficacy for brachytherapy, and there was no discernable systemic toxicity from the drug-loaded spacers. STATEMENT OF SIGNIFICANCE: There has been high interest in the application of 3D printing to engineer novel medical devices. However, such efforts have been limited by the lack of technologies that can fabricate devices suitable for real world medical applications. In this study, we demonstrate a unique application for 3D printing to enhance brachytherapy for cancer treatment. We engineered drug-loaded brachytherapy spacers that can be fabricated using Continuous Liquid Interface Production (CLIP) 3D printing, allowing tunable printing of drug-loaded devices, and implanted intraoperatively with brachytherapy seeds. In combined chemotherapy and brachytherapy we are able to achieve greater therapeutic efficacy through local drug delivery and without systemic toxicities. We believe our work will facilitate further investigation in medical applications of 3D printing.

Delivery of therapeutic carbon monoxide by gas-entrapping materials.

Carbon monoxide (CO) has long been considered a toxic gas but is now a recognized bioactive gasotransmitter with potent immunomodulatory effects. Although inhaled CO is currently under investigation for use in patients with lung disease, this mode of administration can present clinical challenges. The capacity to deliver CO directly and safely to the gastrointestinal (GI) tract could transform the management of diseases affecting the GI mucosa such as inflammatory bowel disease or radiation injury. To address this unmet need, inspired by molecular gastronomy techniques, we have developed a family of gas-entrapping materials (GEMs) for delivery of CO to the GI tract. We show highly tunable and potent delivery of CO, achieving clinically relevant CO concentrations in vivo in rodent and swine models. To support the potential range of applications of foam GEMs, we evaluated the system in three distinct disease models. We show that a GEM containing CO dose-dependently reduced acetaminophen-induced hepatocellular injury, dampened colitis-associated inflammation and oxidative tissue injury, and mitigated radiation-induced gut epithelial damage in rodents. Collectively, foam GEMs have potential paradigm-shifting implications for the safe therapeutic use of CO across a range of indications.

Personalized Radiation Attenuating Materials for Gastrointestinal Mucosal Protection.

Cancer patients undergoing therapeutic radiation routinely develop injury of the adjacent gastrointestinal (GI) tract mucosa due to treatment. To reduce radiation dose to critical GI structures including the rectum and oral mucosa, 3D-printed GI radioprotective devices composed of high-Z materials are generated from patient CT scans. In a radiation proctitis rat model, a significant reduction in crypt injury is demonstrated with the device compared to without (p < 0.0087). Optimal device placement for radiation attenuation is further confirmed in a swine model. Dosimetric modeling in oral cavity cancer patients demonstrates a 30% radiation dose reduction to the normal buccal mucosa and a 15.2% dose reduction in the rectum for prostate cancer patients with the radioprotectant material in place compared to without. Finally, it is found that the rectal radioprotectant device is more cost-effective compared to a hydrogel rectal spacer. Taken together, these data suggest that personalized radioprotectant devices may be used to reduce GI tissue injury in cancer patients undergoing therapeutic radiation.

Evolution of the Role of Radiotherapy for Anal Cancer.

Prior to the 1980s, the primary management of localized anal cancer was surgical resection. Dr. Norman Nigro and colleagues introduced neoadjuvant chemoradiotherapy prior to abdominoperineal resection. Chemoradiotherapy 5-fluorouracil and mitomycin C afforded patients complete pathologic response and obviated the need for upfront surgery. More recent studies have attempted to alter or exclude chemotherapy used in the Nigro regimen to mitigate toxicity, often with worse outcomes. Reductions in acute adverse effects have been associated with marked advancements in radiotherapy delivery using intensity-modulated radiation therapy (IMRT) and image-guidance radiation delivery, resulting in increased tolerance to greater radiation doses. Ongoing trials are attempting to improve IMRT-based treatment of locally advanced disease with efforts to increase personalized treatment. Studies are also examining the role of newer treatment modalities such as proton therapy in treating anal cancer. Here we review the evolution of radiotherapy for anal cancer and describe recent advances. We also elaborate on radiotherapy's role in locally persistent or recurrent anal cancer.

Injection Molded Autoclavable, Scalable, Conformable (iMASC) system for aerosol-based protection: a prospective single-arm feasibility study.

OBJECTIVE: To develop and test a new reusable, sterilisable N95 filtering facepiece respirator (FFR)-comparable face mask, known as the Injection Molded Autoclavable, Scalable, Conformable (iMASC) system, given the dire need for personal protective equipment within healthcare settings during the COVID-19 pandemic. DESIGN: Single-arm feasibility study. SETTING: Emergency department and outpatient oncology clinic. PARTICIPANTS: Healthcare workers who have previously undergone N95 fit testing. INTERVENTIONS: Fit testing of new iMASC system. PRIMARY AND SECONDARY OUTCOME MEASURES: Primary outcome is success of fit testing using an Occupational Safety and Health Administration (OSHA)-approved testing method, and secondary outcomes are user experience with fit, breathability and filter replacement. RESULTS: Twenty-four subjects were recruited to undergo fit testing, and the average age of subjects was 41 years (range of 21-65 years) with an average body mass index of 26.5 kg/m2. The breakdown of participants by profession was 46% nurses (n=11), 21% attending physicians (n=5), 21% resident physicians (n=5) and 12% technicians (n=3). Of these participants, four did not perform the fit testing due to the inability to detect saccharin solution on premask placement sensitivity test, lack of time and inability to place mask over hair. All participants (n=20) who performed the fit test were successfully fitted for the iMASC system using an OSHA-approved testing method. User experience with the iMASC system, as evaluated using a Likert scale with a score of 1 indicating excellent and a score of 5 indicating very poor, demonstrated an average fit score of 1.75, breathability of 1.6, and ease of replacing the filter on the mask was scored on average as 2.05. CONCLUSIONS: The iMASC system was shown to successfully fit multiple different face sizes and shapes using an OSHA-approved testing method. These data support further certification testing needed for use in the healthcare setting.

Post-operative radiation therapy to the surgical cavity with standard fractionation in patients with brain metastases.

The paradigm for post-operative cavity radiation therapy has shifted to more targeted, less morbid approaches. Single-fraction or hypofractionated radiation therapy is a common approach to treating the postoperative cavity but is associated with a local failure rate 20-40%. We employed an alternative treatment strategy involving fractionated partial brain radiation therapy to the surgical cavity. Patients with brain metastases who underwent radiation treatment 30-42 Gy in 3 Gy/fraction regimens to surgical cavity were retrospectively identified. The 6-month and 12-month freedom from local failure rates were 97.0% and 88.2%. Three patients (7%) experienced local failure at 4, 6, and 22 months. Of these, the histologies were colorectal adenocarcinoma (N = 1) and breast adenocarcinoma (N = 2). The 6-month and 12-month freedom from distant brain metastases rates were 74.1% and 68.8%, respectively, and the 6-month and 12-month overall survival rates were 84.9% and 64.3% respectively. The median overall survival was 39 months, and there were no events of late radionecrosis. Fractionated partial brain irradiation to the surgical cavity of resected brain metastases results in low rates of local failure. This strategy represents an alternative to SRS and WBRT.

Use of iontophoresis for the treatment of cancer.

Despite major advancements in cancer treatments, there are still many limitations to therapy including off-target effects, drug resistance, and control of cancer-related symptoms. There are opportunities for local drug delivery devices to intervene at various stages of cancer to provide curative and palliative benefit. Iontophoretic devices that deliver drugs locally to a region of interest have been adapted for the treatment of cancer. These devices have shown promise in pre-clinical and clinical studies for retinoblastoma, skin, bladder, and pancreatic cancers. Herein, we review iontophoretic devices used in the management of cancer.

Impact of formulation on the iontophoretic delivery of the FOLFIRINOX regimen for the treatment of pancreatic cancer.

PURPOSE: Effective treatment of patients with locally advanced pancreatic cancer is a significant unmet clinical need. One major hurdle that exists is inadequate drug delivery due to the desmoplastic stroma and poor vascularization that is characteristic of pancreatic cancer. The local iontophoretic delivery of chemotherapies provides a novel way of improving treatment. With the growing practice of highly toxic combination therapies in the treatment of pancreatic cancer, the use of iontophoresis for local delivery can potentiate the anti-cancer effects of these therapies while sparing unwanted toxicity. The objective of this study was to investigate the impact of formulation on the electro-transport of the FOLFIRINOX regimen for the development of a new treatment for pancreatic cancer. METHODS: Three formulations of the FOLFIRINOX regimen (5-fluorouracil, leucovorin, irinotecan, and oxaliplatin) were generated at a fixed pH of 6.0 and were referred to as formulation A (single drug solution with all four drugs combined), formulation B (two drug solutions with two drugs per solution), and formulation C (four individual drug solutions). Anodic iontophoresis of the three different formulations was evaluated in orthotopic patient-derived xenografts of pancreatic cancer. RESULTS: Iontophoretic transport of the FOLFIRINOX drugs was characterized according to organ exposure after a single device treatment in vivo. We report that the co-iontophoresis of two drug solutions, leucovorin + oxaliplatin and 5-fluorouracil + irinotecan, resulted in the highest levels of cytotoxic drugs in the tumor compared to drugs delivered individually or combined into one solution. There was no significant difference in plasma, pancreas, kidney, and liver exposure to the cytotoxic drugs delivered by the three different formulations. In addition, we found that reducing the duration of iontophoretic treatment from 10 to 5 min per solution resulted in a significant decrease in drug concentrations. CONCLUSIONS: Underlying the difference in drug transport of the formulations was electrolyte concentrations, which includes both active and inactive components. Electrolyte concentrations can hinder or improve drug electro-transport. Overall, balancing electrolyte concentration is needed for optimal electro-transport.

Docetaxel-Loaded PLGA Nanoparticles Improve Efficacy in Taxane-Resistant Triple-Negative Breast Cancer.

Novel treatment strategies, including nanomedicine, are needed for improving management of triple-negative breast cancer. Patients with triple-negative breast cancer, when considered as a group, have a worse outcome after chemotherapy than patients with breast cancers of other subtypes, a finding that reflects the intrinsically adverse prognosis associated with the disease. The aim of this study was to improve the efficacy of docetaxel by incorporation into a novel nanoparticle platform for the treatment of taxane-resistant triple-negative breast cancer. Rod-shaped nanoparticles encapsulating docetaxel were fabricated using an imprint lithography based technique referred to as Particle Replication in Nonwetting Templates (PRINT). These rod-shaped PLGA-docetaxel nanoparticles were tested in the C3(1)-T-antigen (C3Tag) genetically engineered mouse model (GEMM) of breast cancer that represents the basal-like subtype of triple-negative breast cancer and is resistant to therapeutics from the taxane family. This GEMM recapitulates the genetics of the human disease and is reflective of patient outcome and, therefore, better represents the clinical impact of new therapeutics. Pharmacokinetic analysis showed that delivery of these PLGA-docetaxel nanoparticles increased docetaxel circulation time and provided similar docetaxel exposure to tumor compared to the clinical formulation of docetaxel, Taxotere. These PLGA-docetaxel nanoparticles improved tumor growth inhibition and significantly increased median survival time. This study demonstrates the potential of nanotechnology to improve the therapeutic index of chemotherapies and rescue therapeutic efficacy to treat nonresponsive cancers.

Iontophoretic device delivery for the localized treatment of pancreatic ductal adenocarcinoma.

Poor delivery and systemic toxicity of many cytotoxic agents, such as the recent promising combination chemotherapy regimen of folinic acid (leucovorin), fluorouracil, irinotecan, and oxaliplatin (FOLFIRINOX), restrict their full utility in the treatment of pancreatic cancer. Local delivery of chemotherapies has become possible using iontophoretic devices that are implanted directly onto pancreatic tumors. We have fabricated implantable iontophoretic devices and tested the local iontophoretic delivery of FOLFIRINOX for the treatment of pancreatic cancer in an orthotopic patient-derived xenograft model. Iontophoretic delivery of FOLFIRINOX was found to increase tumor exposure by almost an order of magnitude compared with i.v. delivery with substantially lower plasma concentrations. Mice treated for 7 wk with device FOLFIRINOX experienced significantly greater tumor growth inhibition compared with i.v. FOLFIRINOX. A marker of cell proliferation, Ki-67, was stained, showing a significant reduction in tumor cell proliferation. These data capitalize on the unique ability of an implantable iontophoretic device to deliver much higher concentrations of drug to the tumor compared with i.v. delivery. Local iontophoretic delivery of cytotoxic agents should be considered for the treatment of patients with unresectable nonmetastatic disease and for patients with the need for palliation of local symptoms, and may be considered as a neoadjuvant approach to improve resection rates and outcome in patients with localized and locally advanced pancreatic cancer.

Local iontophoretic administration of cytotoxic therapies to solid tumors.

Parenteral and oral routes have been the traditional methods of administering cytotoxic agents to cancer patients. Unfortunately, the maximum potential effect of these cytotoxic agents has been limited because of systemic toxicity and poor tumor perfusion. In an attempt to improve the efficacy of cytotoxic agents while mitigating their side effects, we have developed modalities for the localized iontophoretic delivery of cytotoxic agents. These iontophoretic devices were designed to be implanted proximal to the tumor with external control of power and drug flow. Three distinct orthotopic mouse models of cancer and a canine model were evaluated for device efficacy and toxicity. Orthotopic patient-derived pancreatic cancer xenografts treated biweekly with gemcitabine via the device for 7 weeks experienced a mean log2 fold change in tumor volume of -0.8 compared to a mean log2 fold change in tumor volume of 1.1 for intravenous (IV) gemcitabine, 3.0 for IV saline, and 2.6 for device saline groups. The weekly coadministration of systemic cisplatin therapy and transdermal device cisplatin therapy significantly increased tumor growth inhibition and doubled the survival in two aggressive orthotopic models of breast cancer. The addition of radiotherapy to this treatment further extended survival. Device delivery of gemcitabine in dogs resulted in more than 7-fold difference in local drug concentrations and 25-fold lower systemic drug levels than the IV treatment. Overall, these devices have potential paradigm shifting implications for the treatment of pancreatic, breast, and other solid tumors.

Generating Better Medicines for Cancer.

The complexity of tumor biology warrants tailored drug delivery for overcoming the major challenges faced by cancer therapies. The versatility of the PRINT® (Particle Replication In Non-wetting Templates) process has enabled the preparation of shape- and size-specific particles with a wide range of chemical compositions and therapeutic cargos. Different particle matrices and drugs may be combined in a plug-and-play approach, such that physico-chemical characteristics of delivery vectors may be optimized for biocompatibility, cargo stability and release, circulation half-life, and efficacy. Thus, the engineering of particles for cancer therapy with specific biophysical behaviors and cellular responses has been demonstrated via the PRINT process.

Engineering nanomedicines using stimuli-responsive biomaterials.

The ability to engineer particles has the potential to shift the paradigm in the creation of new medicines and diagnostics. Complete control over particle characteristics, such as size, shape, mechanical property, and surface chemistry, can enable rapid translation and facilitate the US Food and Drug Administration (FDA) approval of particle technologies for the treatment of cancer, infectious diseases, diabetes, and a host of other major illnesses. The incorporation of natural and artificial external stimuli to trigger the release of drugs enables exquisite control over the release profiles of drugs in a given environment. In this article, we examine several readily scalable top-down methods for the fabrication of shape-specific particles that utilize stimuli-responsive biomaterials for controlled drug delivery. Special attention is given to Particle Replication In Nonwetting Templates (PRINT®) technology and the application of novel triggered-release synthetic and natural polymers.

Tunable bifunctional silyl ether cross-linkers for the design of acid-sensitive biomaterials.

Responsive polymeric biomaterials can be triggered to degrade using localized environments found in vivo. A limited number of biomaterials provide precise control over the rate of degradation and the release rate of entrapped cargo and yield a material that is intrinsically nontoxic. In this work, we designed nontoxic acid-sensitive biomaterials based on silyl ether chemistry. A host of silyl ether cross-linkers were synthesized and molded into relevant medical devices, including Trojan horse particles, sutures, and stents. The resulting devices were engineered to degrade under acidic conditions known to exist in tumor tissue, inflammatory tissue, and diseased cells. The implementation of silyl ether chemistry gave precise control over the rate of degradation and afforded devices that could degrade over the course of hours, days, weeks, or months, depending upon the steric bulk around the silicon atom. These novel materials could be useful for numerous biomedical applications, including drug delivery, tissue repair, and general surgery.