Exposure to metals and semivolatile organic compounds in Australian fire stations.

Firefighting is an occupation with exposure to a wide range of chemicals by means of inhalation, ingestion or dermal contact. Although advancements in personal protective clothing and equipment have reduced the risks for acute exposure during fire suppression operations, chronic exposure may still be present at elevated levels in fire stations. The aim of this study was to assess chemicals in air and on surfaces in fire stations, compare this with other indoor environments, and use this data to estimate firefighter exposure within the fire station. Fifteen Australian fire stations were selected for chemical exposure assessment by means of 135 active air monitors, 60 passive air monitors, and 918 wipe samples. These samples were collected from the interior and exterior of fire stations, from personal protective clothing and equipment, and from within the cabins of vehicles. Chemicals analysed included polycyclic aromatic hydrocarbons, volatile organic compounds, metals, and diesel particulate matter. Specific chemicals were detected from within each class of chemicals, with metals being most frequently detected. Statistical analysis by means of Pearson's Correlations and threshold tests were used to consider the source of exposure, and a collective addition risk quotient calculation was used to determine firefighter exposure. The presence of metals in fire stations was compared with findings from global indoor dust measurements. Concentrations across firefighter ensemble, inside vehicle cabins, and within fire stations for chromium (39.5-493 µg/m2), lead (46.7-619 µg/m2), copper (594-3440 µg/m2), zinc (11100-20900 µg/m2), nickel (28.6-2469 µg/m2) and manganese (73.0-997 µg/m2) were in most instances orders of magnitude higher when compared with concentrations measured in homes and offices. Our study suggests that the elevated concentrations are associated with the transfer of chemicals from fire suppression operations. Due to this elevated concentration of chemicals, firefighters may face increased exposure, and in turn increased risk of adverse health effects. Data suggest that exposure may be mitigated by means of increased laundering frequency and increased decontamination at the scene of the fire.

Comprehensive Biological Monitoring to Assess Isocyanates and Solvents Exposure in the NSW Australia Motor Vehicle Repair Industry.

Urethane products that contain isocyanates are extensively used in the motor vehicle repair (MVR) industry and other industries such as furniture and cabinet-making as two-pack spray paints, clears, and adhesives. Attention has recently been refocussed on isocyanate-containing chemicals, particularly in paints. The spray painters in the MVR industry had a propensity to develop industrial asthma at a rate 80 times higher than the general public, which was previously reported in the UK. To track workers exposure to isocyanates, urine samples were collected from 196 spray painters who worked mainly in 78 MVR shops across 54 New South Wales (NSW) towns and suburbs. The biological monitoring also covered exposure testing to a wide variety of solvents including aromatic hydrocarbons, ketones, and alcohols. The main finding of the study was that 2.6% of the spray painters surveyed in the MVR industry in NSW that handled isocyanate-containing paints showed exposure to isocyanates; with 1.0% being moderately exposed, which is more than twice the current UK's Health and Safety Executive (HSE) Biological Monitoring Guidance Value (BMGV) of 1 µmol mol-1 creatinine. Potential exposures to toluene (a solvent often found in paint thinners) was monitored via hippuric acid (HA) urine levels and showed 2.6% of the spray painters surveyed to be over the US' American Conference of Government Industrial Hygienists (ACGIH) Biological Exposure Index (BEI) of 1010 mmol/mole creatinine for HA. The other solvents or their metabolites were all below their respective BEI; these comprised benzene, xylene, ethyl benzene, methyl ethyl ketone, acetone, methanol, and ethanol. These findings indicate that isocyanates and certain solvents exposure were occurring in the NSW Australia vehicle repair industry, albeit at lower levels than previous occupational biological monitoring studies that showed higher exposure levels, particularly for isocyanates. One reason for this could be the increasing use of water-based paints in the industry, resulting in lower than expected isocyanate and solvent metabolite levels detected in this more recent study. Further, the completion of sample context form, along with spot urine collection in relation to the isocyanate exposure monitoring work details will provide crucial information to interpret the biological analysis results. The development of new biomarkers of isocyanate oligomer-derived triamines should be incorporated in the assessment of isocyanate exposure in the MVR industry to provide a more complete picture of isocyanate exposure.