Nomogram predicting long-term overall and cancer-specific survival of patients with buccal mucosa cancer.

BACKGROUND: Few models about the personalized prognosis evaluation of buccal mucosa cancer (BMC) patients were reported. We aimed to establish predictive models to forecast the prognosis of BMC patients. METHODS: The complete clinicopathological information of BMC patients from the surveillance, epidemiology and end results program was collected and reviewed retrospectively. Two nomograms were established and validated to predict long-term overall survival (OS) and cancer-specific survival (CSS) of BMC patients based on multivariate Cox regression survival analysis. RESULTS: 1155 patients were included. 693 and 462 patients were distributed into modeling and validation groups with 6:4 split-ratio via a random split-sample method. Based on the survival analysis, independent prognostic risk factors (variables that can be used to estimate disease recovery and relapse chance) influencing OS and CSS were obtained to establish nomograms. Then, we divided the modeling group into high- and low-risk cohorts. The low-risk cohort had improved OS and CSS compared to the high-risk cohort, which was statistically significant after the Log-rank test (p < 0.05). Furthermore, we used the concordance index (C-index), calibration curve to validate the nomograms, showing high accuracy. The decision curve analyses (DCA) revealed that the nomograms had evident clinical value. CONCLUSIONS: We constructed two credible nomogram models, which would give the surgeons reference to provide an individualized assessment of BMC patients.

A tumor-specific pro-IL-12 activates preexisting cytotoxic T cells to control established tumors.

It is a challenge to effectively reactivate preexisting tumor-infiltrating lymphocytes (TILs) without causing severe toxicity. Interleukin-12 (IL-12) can potently activate lymphocytes, but its clinical use is limited by its short half-life and dose-related toxicity. In this study, we developed a tumor-conditional IL-12 (pro-IL-12), which masked IL-12 with selective extracellular receptor­binding domains of the IL-12 receptor while preferentially and persistently activating TILs after being unmasked by matrix metalloproteinases expressed by tumors. Systemic delivery of pro-IL-12 demonstrated reduced toxicity but better control of established tumors compared with IL-12-Fc. Mechanistically, antitumor responses induced by pro-IL-12 were dependent on TILs and IFNγ. Furthermore, direct binding of IL-12 to IL-12R on CD8+, not CD4+, T cells was essential for maximal effectiveness. Pro-IL-12 improved the efficacy of both immune checkpoint blockade and targeted therapy when used in combination. Therefore, our study demonstrated that pro-IL-12 could rejuvenate TILs, which then combined with current treatment modalities while limiting adverse effects for treating established tumors.

Prefabricated 3D-Printed Tissue-Engineered Bone for Mandibular Reconstruction: A Preclinical Translational Study in Primate.

The advent of three dimensionally (3D) printed customized bone grafts using different biomaterials has enabled repairs of complex bone defects in various in vivo models. However, studies related to their clinical translations are truly limited. Herein, 3D printed poly(lactic-co-glycolic acid)/ß-tricalcium phosphate (PLGA/TCP) and TCP scaffolds with or without recombinant bone morphogenetic protein -2 (rhBMP-2) coating were utilized to repair primate's large-volume mandibular defects and compared efficacy of prefabricated tissue-engineered bone (PTEB) over direct implantation (without prefabrication). 18F-FDG PET/CT was explored for real-time monitoring of bone regeneration and vascularization. After 3-month's prefabrication, the original 3D-architecture of the PLGA/TCP-BMP scaffold was found to be completely lost, while it was properly maintained in TCP-BMP scaffolds. Besides, there was a remarkable decrease in the PLGA/TCP-BMP scaffold density and increase in TCP-BMP scaffolds density during ectopic (within latissimus dorsi muscle) and orthotopic (within mandibular defect) implantation, indicating regular bone formation with TCP-BMP scaffolds. Notably, PTEB based on TCP-BMP scaffold was successfully fabricated with pronounced effects on bone regeneration and vascularization based on radiographic, 18F-FDG PET/CT, and histological evaluation, suggesting a promising approach toward clinical translation.

In Vitro Mechanical and Biological Properties of 3D Printed Polymer Composite and ß-Tricalcium Phosphate Scaffold on Human Dental Pulp Stem Cells.

3D printed biomaterials have been extensively investigated and developed in the field of bone regeneration related to clinical issues. However, specific applications of 3D printed biomaterials in different dental areas have seldom been reported. In this study, we aimed to and successfully fabricated 3D poly (lactic-co-glycolic acid)/ß-tricalcium phosphate (3D-PLGA/TCP) and 3D ß-tricalcium phosphate (3D-TCP) scaffolds using two relatively distinct 3D printing (3DP) technologies. Conjunctively, we compared and investigated mechanical and biological responses on human dental pulp stem cells (hDPSCs). Physicochemical properties of the scaffolds, including pore structure, chemical elements, and compression modulus, were characterized. hDPSCs were cultured on scaffolds for subsequent investigations of biocompatibility and osteoconductivity. Our findings indicate that 3D printed PLGA/TCP and ß-tricalcium phosphate (ß-TCP) scaffolds possessed a highly interconnected and porous structure. 3D-TCP scaffolds exhibited better compressive strength than 3D-PLGA/TCP scaffolds, while the 3D-PLGA/TCP scaffolds revealed a flexible mechanical performance. The introduction of 3D structure and ß-TCP components increased the adhesion and proliferation of hDPSCs and promoted osteogenic differentiation. In conclusion, 3D-PLGA/TCP and 3D-TCP scaffolds, with the incorporation of hDPSCs as a personalized restoration approach, has a prospective potential to repair minor and critical bone defects in oral and maxillofacial surgery, respectively.

Effects of Steam Sterilization on 3D Printed Biocompatible Resin Materials for Surgical Guides-An Accuracy Assessment Study.

Computer-assisted surgery with three-dimensional (3D) printed surgical guides provides more accurate results than free-hand surgery. Steam sterilization could be one of the factors that affect the dimensions of surgical guide resin materials, leading to inaccuracies during surgeries. The purpose of this study was to evaluate the effects of steam sterilization on the dimensional accuracy of indication-specific hollow cube test bodies, manufactured in-house using Class IIa biocompatible resin materials (proprietary and third-party). To evaluate the pre- and post-sterilization dimensional accuracy, root mean square (RMS) values were calculated. The results indicate that, in all the groups, steam sterilization resulted in an overall linear expansion of the photopolymeric resin material, with an increase in outer dimensions and a decrease in inner dimensions. The effects on the dimensional accuracy of test bodies were not statistically significant in all the groups, except PolyJet Glossy (p > 0.05). The overall pre- and post-sterilization RMS values were below 100 and 200 µm, respectively. The highest accuracies were seen in proprietary resin materials, i.e., PolyJet Glossy and SLA-LT, in pre- and post-sterilization measurements, respectively. The dimensional accuracy of third-party resin materials, i.e., SLA-Luxa and SLA-NextDent, were within a comparable range as proprietary materials and can serve as an economical alternative.

Author Correction: A next-generation tumor-targeting IL-2 preferentially promotes tumor-infiltrating CD8+ T-cell response and effective tumor control.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A next-generation tumor-targeting IL-2 preferentially promotes tumor-infiltrating CD8+ T-cell response and effective tumor control.

While IL-2 can potently activate both NK and T cells, its short in vivo half-life, severe toxicity, and propensity to amplify Treg cells are major barriers that prevent IL-2 from being widely used for cancer therapy. In this study, we construct a recombinant IL-2 immunocytokine comprising a tumor-targeting antibody (Ab) and a super mutant IL-2 (sumIL-2) with decreased CD25 binding and increased CD122 binding. The Ab-sumIL2 significantly enhances antitumor activity through tumor targeting and specific binding to cytotoxic T lymphocytes (CTLs). We also observe that pre-existing CTLs within the tumor are sufficient and essential for sumIL-2 therapy. This next-generation IL-2 can also overcome targeted therapy-associated resistance. In addition, preoperative sumIL-2 treatment extends survival much longer than standard adjuvant therapy. Finally, Ab-sumIL2 overcomes resistance to immune checkpoint blockade through concurrent immunotherapies. Therefore, this next-generation IL-2 reduces toxicity while increasing TILs that potentiate combined cancer therapies.

Particulate Coral Hydroxyapatite Sheltered by Titanium Mesh for Localized Alveolar Rehabilitation After Onlay Graft Failure: A Case Report.

Reconstruction of bone loss in the alveolar ridge has long been challenging. Autologous bone grafts are considered as the "golden standard," while little research has focused on how to repair pronounced alveolar bone defects after autologous bone graft failure. The aim of this study was to detail a method based on the titanium mesh technique coupled with particulate coral hydroxyapatite to solve the onlay graft failure. With bone deficiency in the No. 11 and No. 24-25 regions, we harvested 2 autologous bone blocks for reconstruction. Two weeks after transplantation, the graft in the No. 11 region had healed uneventfully, while the graft in the anterior mandible became infected because of soft tissue dehiscence. After removal of the failed autologous bone block, pure coral hydroxyapatite stabilized within titanium mesh was used for alveolar rehabilitation. Six months later, the width of the local alveolar bone was evaluated. After the titanium mesh was removed, a biopsy was performed to study bone regeneration by micro computerized tomography and histology, following by a standard Straumann implant insertion. Although there was wound dehiscence 14 days after bone augmentation, repeated local rinsing and anti-inflammation therapy controlled the inflammatory reaction. The total horizontal bone gain was 4.2 ± 0.5 mm. Micro computerized tomography revealed that the closer the coral hydroxyapatite was to the host bone, the more was resorbed and the more bone regenerated. Histology showed mature lamellar bone structures, with evident residual coral hydroxyapatite. A 3-year follow-up revealed stable bone around the dental implant and successful function of the implant-born prosthesis. This study proposes that the method of particulate coral hydroxyapatite sheltered by titanium mesh is a promising solution in handling alveolar bone augmentation failure. More cases are needed for further research to form an efficient treatment procedure.

Threonine 80 phosphorylation of non-structural protein 1 regulates the replication of influenza A virus by reducing the binding affinity with RIG-I.

Influenza A virus evades host antiviral defense through hijacking innate immunity by its non-structural protein 1 (NS1). By using mass spectrometry, threonine 80 (T80) was identified as a novel phosphorylated residue in the NS1 of the influenza virus A/WSN/1933(H1N1). By generating recombinant influenza viruses encoding NS1 T80 mutants, the roles of this phosphorylation site were characterized during viral replication. The T80E (phosphomimetic) mutant attenuated virus replication, whereas the T80A (non-phosphorylatable) mutant did not. Similar phenotypes were observed for these mutants in a mouse model experiment. In further study, the T80E mutant decreased the binding capacity between NS1 and viral nucleoprotein (NP), leading to impaired viral ribonucleoprotein (vRNP)-mediated viral transcription. The T80E mutant was also unable to inhibit interferon (IFN) production by reducing the binding affinity between NS1 and retinoic acid-induced gene 1 protein (RIG-I), causing attenuation of virus replication. Taken together, the present study reveals that T80 phosphorylation of NS1 reduced influenza virus replication through controlling RIG-I-mediated IFN production and vRNP activity.

[The progress of research on three-dimensional printed jaw scaffolds].

Large defects of jaw caused by tumor, trauma and so on in oral and maxillofacial region lead to facial deformity, language and chewing dysfunction, which severely damage the patient's life quality. Three-dimensional printing (3DP) is also named additive manufacturing (AM), which can print materials layer by layer to create three-dimensional objects. The complex shape of jaw defects can be accurately reconstructed using 3DP scaffold combined with image data, computer-aided-design and manufacture. It has specific advantages compared with traditional way of jaw reconstruction and has attracted much attention in the field of jaw tissue engineering recently. This article presented the progress of 3DP scaffold and its application in jaw reconstruction, providing a new idea for jaw reconstruction.

Phosphorylation controls the nuclear-cytoplasmic shuttling of influenza A virus nucleoprotein.

UNLABELLED: The nucleoprotein (NP) is a major component of the viral ribonucleoprotein (vRNP) complex. During the replication of influenza virus, the vRNP complex undergoes nuclear-cytoplasmic shuttling, during which NP serves as one of the determinants. To date, many phosphorylation sites on NP have been identified, but the biological functions of many of these phosphorylation sites remain unknown. In the present study, the functions of the phosphorylation sites S9, Y10, and Y296 were characterized. These residues are highly conserved, and their phosphorylation was essential for virus growth in cell culture and in a mouse model by regulating the activity of the viral polymerase and the nuclear-cytoplasmic shuttling of NP. The phosphorylation and dephosphorylation of S9 and Y10 controlled nuclear import of NP by affecting the binding affinity between NP and different isoforms of importin-α. In addition, the phosphorylation of Y296 caused nuclear retention of NP by reducing the interaction between NP and CRM1. Furthermore, tyrosine phosphorylation of NP during the early stage of virus infection was ablated when Y296 was mutated to F. However, at later stages of infection, it was weakened by the Y10F mutation. Taken together, the present data indicate that the phosphorylation and dephosphorylation of NP control the shuttling of NP between the nucleus and the cytoplasm during virus replication. IMPORTANCE: It is well known that phosphorylation regulates the functions of viral proteins and the life cycle of influenza A virus. As NP is the most abundant protein in the vRNP complex of influenza A virus, several phosphorylation sites on this protein have been identified. However, the functions of these phosphorylation sites were unknown. The present study demonstrates that the phosphorylation status of these sites on NP can mediate its nuclear-cytoplasmic shuttling, which drives the trafficking of vRNP complexes in infected cells. The present data suggest that the phosphorylated residues of NP are multistep controllers of the virus life cycle and new targets for the design of anti-influenza drugs.