Communication and health education in communities experiencing asbestos risk and health impacts in Italy.

INTRODUCTION: Numerous municipalities in Italy currently experience asbestos health impact, in particular excesses of pleural mesothelioma incidence and mortality. This paper presents an integrated analysis of epidemiological studies and communication actions in affected municipalities to highlight how communication has been implemented depending on health impact evidence and involvement of local stakeholders. METHODOLOGY: Four case studies are identified concerning industrial and natural sources of asbestos exposure having different diseases burden. This integrated analysis benefited from multidisciplinary skills. DISCUSSION: Evidence of different stakeholders engagement is presented to emphasize their role in the communication process. Similarities and differences among case studies allowed us to identify lessons-learned to be transferred in other asbestos contaminated sites. CONCLUSIONS: The adoption of communication strategies and practices, since the very early evidence of asbestos health impact, represents a relevant contribution for epidemiological and health surveillance, particularly for those communities where asbestos health impact has only been recently reported.

[Health impact of asbestos fibres naturally occurring in Mount Pollino area (Basilicata Region, Southern Italy)]. / Impatto sulla salute delle fibre di amianto presenti in affioramenti naturali nell'area del Pollino (Basilicata).

OBJECTIVES: to estimate the health impact of asbestos fibres naturally occurring in Mount Pollino area (Basilicata Region, Southern Italy). DESIGN: geographic mortality, hospitalization, and incidence study. Setting and participant s: population resident in 12 Municipalities of Mount Pollino area with naturally occurring asbestos fibres. MAIN OUTCOME MEASURES: standardized mortality ratio (SMR) and standardized hospitalization rate (SHR) for asbestos-related diseases; standardized incidence ratio (SIR) for mesotheliomas. Result s: in the area of Mount Pollino, where asbestos fibres naturally occur, especially in the sub-area in which fibres are close to dwellings and settlements, it was observed: • a significant excess of mesothelioma incidence (SIR: 208; CI95% 111-355; 13 observed); • a non-significant excess of hospitalization for malignant pleural neoplasms (SHR: 176; CI95% 93-335; 9 observed); • a significant excess for mortality and hospitalization for pneumoconiosis (SMR: 534; CI95% 345-824; 20 observed - SHR: 245; CI95% 149-405; 15 observed); • a significant excess for hospitalization (SHR: 852; CI95% 290-2,506; 3 observed) for asbestosis. CONCLUSION: it is necessary to continue environmental monitoring and environmental remediation in the area with higher asbestos exposure. It is suggested to implement a permanent process of epidemiological surveillance in this same area. A communication plan with local administrators, general practitioners, school teachers, media, and the resident population at large should be realized.

Comparative biomechanical evaluation of mono-cortical osteosynthesis systems for condylar fractures using photoelastic stress analysis.

Fractures of the condyle account for 20-30% of all mandibular fractures, and are therefore one of the most common facial injuries. Precise evaluation of the mechanical stresses that develop in a fractured mandible is essential, particularly for the testing of systems currently used for stabilisation of the condylar fragment. Photoelastic stress analysis can be used to visualise alterations in the strain that is induced in the mandible by a fracture, and in the osteosynthesis materials used to stabilise it. This method, used on currently used osteosynthesis materials, showed that stabilisation of a subcondylar fracture with a single miniplate does not provide enough stability, whereas the use of two miniplates - properly positioned - offers sufficient stability in all loading conditions. A microplate may be used as a tension-resisting plate with equally good results.

[Consensus Conference "Health surveillance of resident population exposed to tremolite in Local Health Unit 3 territory Lagonegro, PZ". Rome 22-23 February 2005]. / Consensus Conference "Sorveglianza sanitaria delle popolazioni esposte a fibre di tremolite nel territorio della ASL 3 Lagonegro-PZ". Roma 22-23 febbraio 2005.

Herein is reported the health surveillance document agreed upon during the Consensus Conference held in Rome at the Istituto Superiore di Sanità last year. The aim of the consensus conference was to define guidelines for epidemiologic and health surveillance of the resident population in the area of the Basilicata region exposed to tremolite pollution (Local Health Unit 3 territory Lagonegro, PZ). The health surveillance program for residents and the nested epidemiologic study evaluates for each resident willing to participate, individual exposure with a personal dosimeter, as well as the prevalence of obstructive, restrictive or mixed pulmonary functional patterns, searching for fiber and asbestos bodies in induced-sputum, the prevalence of non malignant asbestos disturbances related to pleural anomalies and, last but not least, provides information on risks and sensitization, advising on personal behaviour that could reduce the risks.

Composite resin bond strength to primary dentin prepared with Er, Cr:YSSG laser.

This in vitro study evaluated the shear bond strength of a hybrid composite resin bonded to primary dentin prepared with an Er, Cr:YSGG hydrokinetic laser compared to conventional bur prepared primary dentin. The results suggest that primary dentin surfaces treated with the Er, Cr:YSGG laser, with or without etching, may provide comparable or increased composite resin bond strengths depending upon bonding agent used.

Bicortically stabilized implant load transfer.

PURPOSE: Questions exist as to the potential advantages of bicortical stabilization of implants in the mandible through engagement of the lingual cortical plate. The purpose of this investigation was to determine photoelastically the effect of lingual cortical plate engagement on implant load transfer. MATERIALS AND METHODS: Composite photoelastic models of an edentulous posterior segment of a mandible were fabricated using plastics of different modulus to simulate cortical and trabecular bone. One model included a 3.75 x 15-mm threaded implant that engaged the simulated lingual cortical plate, while in the other model the implant was centrally located within the simulated trabecular bone. A metal superstructure was cast using an abutment cylinder. Simulated vertical occlusal loads were applied to the superstructure over the implant and at fixed buccal cantilever lengths. Stresses that developed within the model were monitored photoelastically and recorded photographically. Peri-implant defects were then formed in the models and the loading and recording procedures were repeated. RESULTS: Lingual cortical plate engagement generated the highest stresses at the lingual cortical plate and the buccal crestal cortical layer at the implant neck. Stress intensity within the buccal plate at the implant neck was lower than that in the centrally placed implant. In the presence of a peri-implant defect, for all load conditions, more load was borne by the trabecular bone. Increasing cantilever lengths caused asymmetric load transfer with higher maximum stresses. DISCUSSION: For both implant placements, a large portion of the applied load was taken by the crestal cortical bone simulant. Engagement of the lingual cortical plate reduced maximum stress in the crestal cortical bone by approximately 25%. With peri-implant defects, the simulated trabecular bone provided the main support of the applied load. Longer buccal cantilever lengths increased maximum stresses for all placement and crestal bone conditions. CONCLUSIONS: The results of this investigation do not indicate a clear load transfer advantage to apical engagement of the lingual cortical plate in this model.

Transferencia de esfuerzos por implantes oseointegrados

Se estudiaron las características de la distribución de las cargas de dos diseños de implantes, el de Branemark y el sistema Core-Vent, bajo cargas verticales e inclinadas, usando modelos fotoelásticos. Las cargas aplicadas se transfirieron más equitativamente a las estructuras de soporte, con el diseño de Branemark, que con el diseño Core-Vent