RESUMO
The properties of food products are the result of changes produced in raw materials as a result of process treatments. In the olive oil extraction process, these changes can be observed as differences in quality, nutritional characteristics, taste, and flavor, and are especially due to the time and temperature of the malaxation phase. These parameters are closely related to the mechanical design of malaxer machines. In this study, a new reel model for malaxer machines was designed. The new model was incorporated into an industrial malaxer machine and experimental tests were carried out to study the effects of two different reel designs (modified and unmodified profile) on the rheological characteristics of olive paste, the energy consumption of the plant, and the temperature profile inside the machine. The main commercial parameters of the produced olive oil were studied, as well as the extraction yield and the extraction efficiency of the plant. The malaxer machine equipped with the modified reel showed better homogenization of the paste, which led to improved heat exchange and rheological properties. The results of this study showed that a specific modification of the rotating reel can improve the performance of the malaxer in terms of improving the viscosity of the paste, 127,157.67 (mPa sn) for the malaxer with the modified reel at the beginning of malaxation, reaching a final value of 64,626.00 (mPa sn) at the end. The unmodified malaxer showed an initial viscosity coefficient of 133,754.00 (mPa sn) and a final value of 111,990.67 (mPa sn). This led to a reduction in malaxing times, an increase in the work capacity of the plant, and a reduction in total energy consumption and slowed down the oxidative phenomena responsible for the decrease in the quality of olive oil.
RESUMO
BACKGROUND: Nowadays, olive oil extraction is basically achieved by means of two-phase decanters, which allow a reduction of water consumption and the leaching of phenolic compounds. Despite this, most of the working settings derive from studies carried out on three-phase decanters. Hence, the aim of the present study was to assess the influence of two-phase decanter feed pipe position (FP) on the extraction efficiency and chemical-sensory characteristics of virgin olive oil. Three different positions were considered: at 825 mm (FP1), 610 mm (FP2) and 520 mm (FP3) from the outlet of the oily phase. RESULTS: Position FP3 allowed the highest oil recovery (up to 10%), the lowest percentage of oil in the olive pomace and, in general, a regular trend in terms of oil extraction efficiency. However, the oily must that came out of the decanter was not completely clean in terms of residual content of solid sediment and water. The feeding position partially affected the profile of antioxidant compounds. CONCLUSION: In two-phase decanters, loading the olive paste close to the outlet of the oily phase is recommended to increase the extraction efficiency without jeopardizing the chemical-sensory characteristics of virgin olive oil. © 2018 Society of Chemical Industry.