Subregional pharyngeal changes after orthognathic surgery in skeletal Class III patients analyzed by convolutional neural networks-based segmentation.

OBJECTIVES: To evaluate the accuracy of fully automatic segmentation of pharyngeal volume of interests (VOIs) before and after orthognathic surgery in skeletal Class III patients using a convolutional neural network (CNN) model and to investigate the clinical applicability of artificial intelligence for quantitative evaluation of treatment changes in pharyngeal VOIs. METHODS: 310 cone-beam computed tomography (CBCT) images were divided into a training set (n = 150), validation set (n = 40), and test set (n = 120). The test datasets comprised matched pairs of pre- and post-treatment images of 60 skeletal Class III patients (mean age 23.1 ± 5.0 years; ANB<-2°) who underwent bimaxillary orthognathic surgery with orthodontic treatment. A 3D U-Net CNNs model was applied for fully automatic segmentation and measurement of subregional pharyngeal volumes of pre-treatment (T0) and post-treatment (T1) scans. The model's accuracy was compared to semi-automatic segmentation outcomes by humans using the dice similarity coefficient (DSC) and volume similarity (VS). The correlation between surgical skeletal changes and model accuracy was obtained. RESULTS: The proposed model achieved high performance of subregional pharyngeal segmentation on both T0 and T1 images, representing a significant T1-T0 difference of DSC only in the nasopharynx. Region-specific differences amongst pharyngeal VOIs, which were observed at T0, disappeared on the T1 images. The decreased DSC of nasopharyngeal segmentation after treatment was weakly correlated with the amount of maxillary advancement. There was no correlation between the mandibular setback amount and model accuracy. CONCLUSIONS: The proposed model offers fast and accurate subregional pharyngeal segmentation on both pre-treatment and post-treatment CBCT images in skeletal Class III patients. CLINICAL SIGNIFICANCE: We elucidated the clinical applicability of the CNNs model to quantitatively evaluate subregional pharyngeal changes after surgical-orthodontic treatment, which offers a basis for developing a fully integrated multiclass CNNs model to predict pharyngeal responses after dentoskeletal treatments.

Reorientation methodology for reproducible head posture in serial cone beam computed tomography images.

Low dose and accessibility have increased the application of cone beam computed tomography (CBCT). Often serial images are captured for patients to diagnose and plan treatment in the craniofacial region. However, CBCT images are highly variable and lack harmonious reproduction, especially in the head's orientation. Though user-defined orientation methods have been suggested, the reproducibility remains controversial. Here, we propose a landmark-free reorientation methodology based on principal component analysis (PCA) for harmonious orientation of serially captured CBCTs. We analyzed three serial CBCT scans collected for 29 individuals who underwent orthognathic surgery. We first defined a region of interest with the proposed protocol by combining 2D rendering and 3D convex hull method, and identified an intermediary arrangement point. PCA identified the y-axis (anterioposterior) followed by the secondary x-axis (transverse). Finally, by defining the perpendicular z-axis, a new global orientation was assigned. The goodness of alignment (Hausdorff distance) showed a marked improvement (> 50%). Furthermore, we clustered cases based on clinical asymmetry and validated that the protocol was unaffected by the severity of the skeletal deformity. Therefore, it could be suggested that integrating the proposed algorithm as the preliminary step in CBCT evaluation will address a fundamental step towards harmonizing the craniofacial imaging records.

Radiographical characteristics and traction duration of impacted maxillary canine requiring surgical exposure and orthodontic traction: a cross-sectional study.

This cross-sectional study aimed to classify the radiographical characteristics of impacted maxillary canines that were surgically exposed following orthodontic traction and to find out which factor is most closely related to traction duration. This study enrolled 74 patients with 87 maxillary canines. Cone-beam computed tomography images, panoramic radiographs, and medical records were analyzed. Cystic-appearing lesion and resorption of adjacent roots were observed in 26.4% and 23.0% of cases, respectively. Impacted maxillary canines were mostly distributed in the lateral incisor area. The mean (± standard deviation) traction duration for the 47 teeth that met the study criteria was 13.9 (± 8.9) months. Impacted maxillary canines treated with surgical exposure and orthodontic traction showed increasing possibilities of palatal impaction and resorption of the adjacent root as they were located mesially (p < 0.05). The distance from the occlusal plane to the impacted maxillary canine showed the strongest positive correlation with traction duration (r = 0.519, p < 0.01). When establishing treatment plans for patients with impacted maxillary canines, distance from the occlusal plane to the impacted canines, rather than the angle, should be considered in predicting the duration of treatment.

Correlation Analysis between Three-Dimensional Changes in Pharyngeal Airway Space and Skeletal Changes in Patients with Skeletal Class II Malocclusion following Orthognathic Surgery.

INTRODUCTION: Studies on the pharyngeal airway space (PAS) changes using three-dimensional computed tomography (CT) have shed more light on patients with Class III than Class II malocclusion. This paper focuses on analyzing the long-term changes in the PAS and evaluating the postoperative association between these PAS and skeletal changes in patients with skeletal Class II malocclusion who have undergone orthognathic surgery. METHODS: The records of 21 patients with skeletal Class II malocclusion who had undergone orthognathic surgery were included. The anatomical modifications in both jaws, changes in volume, sectional area (SA), minimum sectional area (MSA), and anterior-posterior (AP) and transverse (TV) width in the airway at one month before surgery (T0), and one month (T1) and one year (T2) after surgery were analyzed using CT images. The association between the skeletal and airway changes was evaluated between T0, T1, and T2. RESULTS: After surgery, the ANS, A point, and PNS demonstrated significant posterior and superior movement. The B point and the pogonion exhibited substantial anterior and superior movement. The total and inferior oropharyngeal volumes (vol 3, vol 4) notably increased, while the nasopharyngeal volume (vol 1) decreased. The anterior-posterior movement at the ANS and PNS after surgery was significantly associated with the total volume, vol 2, vol 3, SA 1, MSA, and TV width 1, while substantial association with the total volume was found at the pogonion. CONCLUSION: Thus, an ideal treatment plan can be formulated for patients with skeletal Class II malocclusion by considering the postoperative PAS changes.

The effect of genetic polymorphisms on treatment duration following premolar extraction.

To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients are summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified nine single nucleotide polymorphisms (SNPs) of six genes that significantly differed in the two groups via targeted sequencing. The frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, TT genotype of SPP1 (rs1126616), and GG genotype of SFRP2 was significantly higher in the extreme long group than in the short group. In the extreme short group, the TC genotype of SPP1, AA genotype of P2RX7, CT genotype of TNFSF11, and AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Our findings could lead to further studies predicting the prolongation of the orthodontic treatment duration, and will be of great aid to patients as well as orthodontists.

Surgical treatment of a skeletal Class III patient using customized brackets based on the CAD/CAM virtual orthodontic system.

The computer-aided design/computer-aided manufacturing (CAD/CAM) virtual orthodontic system produces customized brackets, indirect bonding jigs, and archwires based on a three-dimensional virtual setup. In surgical cases, this system helps to visualize the final occlusion during diagnosis and to efficiently plan individualized presurgical orthodontic treatments. A 20-year-old female patient with a skeletal Class III malocclusion, maxillary protrusion, and lip protrusion was successfully treated with orthognathic surgery and orthodontic treatment with maxillary first premolar extractions. The CAD/CAM system was applied for efficient treatment, with a total active treatment time of 16 months. In this case report, the applicability of the CAD/CAM virtual orthodontic system for orthognathic surgery cases is demonstrated. Suggestions are also made to overcome the limitations and to maximize the advantages of this system during orthodontic treatment of patients undergoing orthognathic surgery.

Differences in soft-tissue thickness changes after bimaxillary surgery between patients with vertically high angle and normal angle.

INTRODUCTION: We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. METHODS: Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. RESULTS: Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. CONCLUSIONS: The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Changes in Cellular Regulatory Factors before and after Decompression of Odontogenic Keratocysts.

Decompression followed by enucleation, which is one of the treatments used for odontogenic keratocysts (OKCs), is frequently used in OKC lesions of large sizes. This method offers the advantage of minimizing the possibility of sensory impairment without creating a wide-range bone defect; moreover, the recurrence rate can be significantly lower than following simple enucleation. This study aimed to assess the changes in histology and expression of proliferation markers in OKCs before and after decompression treatment. A total of 38 OKC tissue samples from 19 patients who had undergone decompression therapy were examined morphologically and immunohistochemically to observe changes in proliferative activity before and after decompression. The markers used for immunohistochemistry (IHC) staining were Bcl-2, epidermal growth factor receptor (EGFR), Ki-67, P53, PCNA, and SMO. The immunohistochemistry positivity of the 6 markers was scored by using software ImageJ, version 1.49, by quantifying the intensity and internal density of IHC-stained epithelium. The values of Bcl-2, Ki-67, P53, proliferating cell nuclear antigen (PCNA), and SMO in OKCs before and after decompression showed no significant change. No correlation between clinical shrinkage and morphologic changes or expression of proliferation and growth markers could be found. There was no statistical evidence that decompression treatment reduces potentially aggressive behavior of OKC within the epithelial cyst lining itself. This might indicate that decompression does not change the biological behavior of the epithelial cyst lining or the recurrence rate.

Effect of Cyclic Compressive Forces on New Bone Formation during the Distraction Period in Mandibular Distraction Osteogenesis Using a Microactuator-Generated Distractor.

BACKGROUND: The traditional method of distraction required a long period until the new bone was fully fused. This study aimed to evaluate the effect of cyclic and repetitive compressive force on new bone formation by applying a newly designed microactuator-generated distractor compared with the traditional distraction protocol. METHODS: The distraction devices were applied to the right and left mandibles of eight mature beagles, four of which were allocated to the experimental group and the other four to the control group. After a 5-day latency period, in the experimental group, 1.5-mm distraction and 0.5-mm compression were alternately applied every 12 hours; and in the control group, 0.5-mm distraction was repeated every 12 hours to perform a total of 7-mm mandibular lengthening. After an 8-week consolidation period, microstructure analysis using micro-computed tomography and histologic evaluations were performed. RESULTS: Bone volume fraction and trabecular number were significantly higher in the experimental group. Trabecular thickness did not show a significant difference, and trabecular separation was significantly higher in the control group. The measurement of new bone was significantly higher in the experimental group, but the difference in mineral apposition rate between the experimental and control groups was not statistically significant. CONCLUSIONS: This study has revealed that applying cyclic compressive and tensile forces during the distraction period induces better new bone formation than repetitive distraction alone. In addition, the new distraction device produced reliable distraction results during the experiment.

How Is the Created Alveolar Space Finally Restored After Maxillary Anterior Segmental Distraction Osteogenesis?

OBJECTIVE: Maxillary anterior segmental distraction osteogenesis (MASDO) for cleft and palate patients is the alternative treatment option to correct malocclusion with maxillary arch deficiency and severe crowding. After MASDO, prosthetic considerations are crucial for patients with cleft lip and palate because it is related to facial esthetics and occlusal function. The objectives of this study were to investigate the final restoration type for created alveolar space by MASDO. METHODS: Thirteen patients with cleft lip and palate who underwent MASDO and orthodontic treatment from the years 2000 to 2010 in Yonsei University were examined. Final restorations are classified as dental implants, conventional prosthesis, and orthodontic space closure. The relationship between the distracted areas and final restoration type was investigated. The authors evaluated lateral cephalograms obtained at predistraction osteogenesis (pre-DO; T1), postdistraction osteogenesis (post-DO; T2), and debond (T3), and measured changes from T1 to T2 and from T2 to T3. RESULTS: There was no significant difference of final restoration percentage of dental implants, conventional prosthesis, and space closure with orthodontic treatment. However, dental implants and conventional prostheses were applied more frequently in the posterior area and in the anterior area, respectively. The relapse rate was observed as 36.7% and 22.4% in the values of N-A distance and ANB angulation in T2-T3 stage. CONCLUSION: The MASDO site should be decided, based on final restoration goal. Among the created alveolar spaces, implants were applied mainly to the posterior site and the conventional prostheses were mostly restored to the anterior site. For space closure by orthodontic approach, the area could be both anterior or posterior.

Effect of flapless osteoperforation-assisted tooth movement on atrophic alveolar ridge: Histomorphometric and gene-enrichment analysis.

OBJECTIVE: To investigate the effect of flapless osteoperforation on the tissue response of the atrophic alveolar ridge affected by orthodontic tooth movement (OTM). MATERIALS AND METHODS: An atrophic alveolar ridge model was established in the mandibular quadrants of eight beagle dogs. As a split-mouth design, the quadrants were randomly divided into group C (OTM only) and group OP (OTM with flapless osteoperforation). The rate of OTM for 10 weeks was compared between groups, and micro-CT-based histomorphometric analysis and RNA-sequencing-based gene-enrichment analysis were performed targeting the atrophic ridge. RESULTS: Group OP displayed more rapid tooth movement with lower bone mineral density and higher trabecular fraction in the atrophic ridge than did group C, showing no intergroup difference of total ridge volume. As contributing biological functional pathways in group OP, the genes related to osteoclast differentiation and TNF signaling pathway were up-regulated and those associated with Wnt signaling pathway and AMPK signaling pathway were down-regulated. CONCLUSIONS: Flapless osteoperforation facilitated the rate of OTM toward the atrophic ridge, maintaining low bone density, whereas it did not increase the volume of the atrophic ridge.

Comparison of changes in the transverse dental axis between patients with skeletal Class III malocclusion and facial asymmetry treated by orthognathic surgery with and without presurgical orthodontic treatment.

OBJECTIVE: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. METHODS: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. RESULTS: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, -1.8° ± 2.8°, p = 0.044; nondeviated side, -3.7° ± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0° ± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. CONCLUSIONS: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

Skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion in young adults: A cone-beam computed tomography study.

OBJECTIVE: The aim of this study was to evaluate the skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion (MARPE) in young adults by cone-beam computed tomography (CBCT). METHODS: This retrospective study included 14 patients (mean age, 20.1 years; range, 16-26 years) with maxillary transverse deficiency treated with MARPE. Skeletal and dentoalveolar changes were evaluated using CBCT images acquired before and after expansion. Statistical analyses were performed using paired t-test or Wilcoxon signed-rank test according to normality of the data. RESULTS: The midpalatal suture was separated, and the maxilla exhibited statistically significant lateral movement (p < 0.05) after MARPE. Some of the landmarks had shifted forwards or upwards by a clinically irrelevant distance of less than 1 mm. The amount of expansion decreased in the superior direction, with values of 5.5, 3.2, 2.0, and 0.8 mm at the crown, cementoenamel junction, maxillary basal bone, and zygomatic arch levels, respectively (p < 0.05). The buccal bone thickness and height of the alveolar crest had decreased by 0.6-1.1 mm and 1.7-2.2 mm, respectively, with the premolars and molars exhibiting buccal tipping of 1.1°-2.9°. CONCLUSIONS: Our results indicate that MARPE is an effective method for the correction of maxillary transverse deficiency without surgery in young adults.

Is There a Difference in Stability After Intraoral Vertical Ramus Osteotomy Between Vertically High-Angle and Normal-Angle Patients?

PURPOSE: Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. MATERIALS AND METHODS: The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. RESULTS: The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. CONCLUSIONS: These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

Five-year investigation of a large orthodontic patient population at a dental hospital in South Korea.

OBJECTIVE: The purpose of this study was to investigate the characteristics of orthodontic patients at Yonsei Dental Hospital from 2008 to 2012. METHODS: We evaluated Angle's classification from molar relationships, classification of skeletal malocclusion from the A point-nasion-B point angle, facial asymmetry, and temporomandibular joint disorders (TMDs) from the records of 7,476 patients who received an orthodontic diagnosis. The orthognathic surgery rate, extraction rate, and extraction sites were determined from the records of 4,861 treated patients. RESULTS: The patient number increased until 2010 and gradually decreased thereafter. Most patients were aged 19-39 years, with a gradual increase in patients aged ≥ 40 years. Angle's Class I, Class II divisions 1 and 2, and Class III malocclusions were observed in 27.7%, 25.6%, 10.6%, and 36.1% patients, respectively, with a gradual decrease in the frequency of Class I malocclusion. The proportion of patients with skeletal Class I, Class II, and Class III malocclusions was 34.3%, 34.3%, and 31.4%, respectively, while the prevalence of facial asymmetry and TMDs was 11.0% and 24.9%, respectively. The orthognathic surgery rate was 18.5%, with 70% surgical patients exhibiting skeletal Class III malocclusion. The overall extraction rate among nonsurgical patients was 35.4%, and the maxillary and mandibular first premolars were the most commonly extracted teeth. CONCLUSIONS: The most noticeable changes over time included a decrease in the patient number after 2010, an increase in the average patient age, and a decrease in the frequency of Angle's Class I malocclusion. Our results suggest that periodic characterization is necessary to meet the changing demands of orthodontic patients.

Major factors contributing to anterior and posterior relapse after intraoral vertical ramus osteotomy.

The aim of this retrospective cohort study was to investigate the factors contributing to mandibular relapse after intraoral vertical ramus osteotomy (IVRO) while controlling for possible confounders. Forty-seven patients who underwent bimaxillary surgery were divided into three groups according to the direction of horizontal mandibular relapse: a stable group (group S), a posterior relapse group (group P), and an anterior relapse group (group A). Lateral cephalograms were analysed 1 month before and at 7 days and 12 months after surgery. One month before surgery, the pogonion in group A was positioned about 13 mm more anteriorly than in group P (P < 0.05). Immediately after surgery, the mandibles in groups A and S had moved about 6 mm more posteriorly than in group P. At 12 months, both the mandibles (point B) and the maxillae (point A) had moved posteriorly in group P (P < 0.05). A multivariate linear regression analysis showed that the amount of setback was the one key factor predicting postoperative mandibular changes 12 months after IVRO. As the amount of setback decreased, mandibular posterior horizontal relapse increased after IVRO. These findings suggest that the amount of setback can be a key factor predicting postoperative mandibular relapse.

Intraoral Vertical Ramus Osteotomy Results in Good Long-Term Mandibular Stability in Patients With Mandibular Prognathism and Anterior Open Bite.

PURPOSE: Few studies have evaluated the outcomes of intraoral vertical ramus osteotomy (IVRO) for the correction of skeletal Class III malocclusion with an anterior open bite and the potential for postoperative relapse. Therefore, this study evaluated the stability of outcomes of IVRO for mandibular prognathism with and without an anterior open bite. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusion with (AOB group) and without (NAOB group) an anterior open bite who underwent IVRO at Yonsei Dental Hospital (Seoul, Korea). Lateral cephalograms were analyzed for predictor (open bite, yes or no) and outcome (horizontal and vertical relapse in the mandible) variables before and 7 days, 1 year, and 2 years after surgery. Other variables included the patients' demographic characteristics. Data were analyzed using independent t tests, repeated measures analysis of variance, Pearson correlation coefficients, and multiple linear regression analysis. RESULTS: The 2 groups (n = 15 each) were matched for baseline demographic characteristics. During the 2-year postoperative period, anterior and superior mandibular movements were observed in the NAOB group, whereas posterior and superior movements were observed in the AOB group. However, there were no meaningful intergroup differences in horizontal and vertical relapses of the mandible at all time points, although the amount of postoperative inferior relapse increased with a decrease in the amount of initial overbite. CONCLUSIONS: IVRO for the correction of skeletal Class III malocclusion resulted in good postoperative stability over time, regardless of the presence of a preoperative open bite, although the amount of postoperative inferior relapse showed a weak negative correlation with the initial overbite. Thus, IVRO can be a clinically acceptable treatment for skeletal Class III malocclusion with an anterior open bite.

Effect of Audiovisual Treatment Information on Relieving Anxiety in Patients Undergoing Impacted Mandibular Third Molar Removal.

PURPOSE: The authors hypothesized that an audiovisual slide presentation that provided treatment information regarding the removal of an impacted mandibular third molar could improve patient knowledge of postoperative complications and decrease anxiety in young adults before and after surgery. A group that received an audiovisual description was compared with a group that received the conventional written description of the procedure. MATERIALS AND METHODS: This randomized clinical trial included young adult patients who required surgical removal of an impacted mandibular third molar and fulfilled the predetermined criteria. The predictor variable was the presentation of an audiovisual slideshow. The audiovisual informed group provided informed consent after viewing an audiovisual slideshow. The control group provided informed consent after reading a written description of the procedure. The outcome variables were the State-Trait Anxiety Inventory, the Dental Anxiety Scale, a self-reported anxiety questionnaire, completed immediately before and 1 week after surgery, and a postoperative questionnaire about the level of understanding of potential postoperative complications. The data were analyzed with χ(2) tests, independent t tests, Mann-Whitney U  tests, and Spearman rank correlation coefficients. RESULTS: Fifty-one patients fulfilled the inclusion criteria. The audiovisual informed group was comprised of 20 men and 5 women; the written informed group was comprised of 21 men and 5 women. The audiovisual informed group remembered significantly more information than the control group about a potential allergic reaction to local anesthesia or medication and potential trismus (P < .05). The audiovisual informed group had lower self-reported anxiety scores than the control group 1 week after surgery (P < .05). CONCLUSION: These results suggested that informing patients of the treatment with an audiovisual slide presentation could improve patient knowledge about postoperative complications and aid in alleviating anxiety after the surgical removal of an impacted mandibular third molar.

Realization of masticatory movement by 3-dimensional simulation of the temporomandibular joint and the masticatory muscles.

Masticatory muscles are closely involved in mastication, pronunciation, and swallowing, and it is therefore important to study the specific functions and dynamics of the mandibular and masticatory muscles. However, the shortness of muscle fibers and the diversity of movement directions make it difficult to study and simplify the dynamics of mastication. The purpose of this study was to use 3-dimensional (3D) simulation to observe the functions and movements of each of the masticatory muscles and the mandible while chewing. To simulate the masticatory movement, computed tomographic images were taken from a single Korean volunteer (30-year-old man), and skull image data were reconstructed in 3D (Mimics; Materialise, Leuven, Belgium). The 3D-reconstructed masticatory muscles were then attached to the 3D skull model. The masticatory movements were animated using Maya (Autodesk, San Rafael, CA) based on the mandibular motion path. During unilateral chewing, the mandible was found to move laterally toward the functional side by contracting the contralateral lateral pterygoid and ipsilateral temporalis muscles. During the initial mouth opening, only hinge movement was observed at the temporomandibular joint. During this period, the entire mandible rotated approximately 13 degrees toward the bicondylar horizontal plane. Continued movement of the mandible to full mouth opening occurred simultaneously with sliding and hinge movements, and the mandible rotated approximately 17 degrees toward the center of the mandibular ramus. The described approach can yield data for use in face animation and other simulation systems and for elucidating the functional components related to contraction and relaxation of muscles during mastication.