Formation and culture of cell spheroids by using magnetic nanostructures resembling a crown of thorns.

In contrast to traditional two-dimensional cell-culture conditions, three-dimensional (3D) cell-culture models closely mimic complexin vivoconditions. However, constructing 3D cell culture models still faces challenges. In this paper, by using micro/nano fabrication method, including lithography, deposition, etching, and lift-off, we designed magnetic nanostructures resembling a crown of thorns. This magnetic crown of thorns (MCT) nanostructure enables the isolation of cells that have endocytosed magnetic particles. To assess the utility of this nanostructure, we used high-flux acquisition of Jurkat cells, an acute-leukemia cell line exhibiting the native phenotype, as an example. The novel structure enabled Jurkat cells to form spheroids within just 30 min by leveraging mild magnetic forces to bring together endocytosed magnetic particles. The size, volume, and arrangement of these spheroids were precisely regulated by the dimensions of the MCT nanostructure and the array configuration. The resulting magnetic cell clusters were uniform in size and reached saturation after 1400 s. Notably, these cell clusters could be easily separated from the MCT nanostructure through enzymatic digestion while maintaining their integrity. These clusters displayed a strong proliferation rate and survival capabilities, lasting for an impressive 96 h. Compared with existing 3D cell-culture models, the approach presented in this study offers the advantage of rapid formation of uniform spheroids that can mimicin vivomicroenvironments. These findings underscore the high potential of the MCT in cell-culture models and magnetic tissue enginerring.

Rapid time-lapse 3D oxygen tension measurements within hydrogels using widefield frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) and image segmentation.

Understanding the influence of oxygen tension on cellular functions and behaviors is crucial for investigating various physiological and pathological conditions. In vitro cell culture models, particularly those based on hydrogel extracellular matrices, have been developed to study cellular responses in specific oxygen microenvironments. However, accurately characterizing oxygen tension variations with great spatiotemporal resolutions, especially in three dimensions, remains challenging. This paper presents an approach for rapid time-lapse 3D oxygen tension measurements in hydrogels using a widely available inverted fluorescence microscope. Oxygen-sensitive fluorescent microbeads and widefield frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) are utilized for oxygen tension estimation. To incorporate the third dimension, a motorized sample stage is implanted that enables automated image acquisition in the vertical direction. A machine learning algorithm based on K-means clustering is employed for microbead position identification. Using an upside-down microfluidic device, 3D oxygen gradients are generated within a hydrogel sample, and z-stack images are acquired using the FD-FLIM system. Analyses of the acquired images, involving microbead position identification, lifetime calculation, and oxygen tension conversion, are then performed offline. The results demonstrate the functionality of the developed approach for rapid time-lapse 3D oxygen tension measurements in hydrogels. Furthermore, the 3D oxygen tension adjacent to a tumor spheroid within a hydrogel during media exchange is characterized. The results further confirm that the 3D spatiotemporal oxygen tension profiles can be successfully measured quantitatively using the established setup and analysis process and that the approach may have great potential for investigating cellular activities within oxygen microenvironments.

Effects of six pyrimidine analogs on the growth of Tetrahymena thermophila and their implications in pyrimidine metabolism.

Tetrahymena are ciliated protists that have been used to study the effects of toxic chemicals, including anticancer drugs. In this study, we tested the inhibitory effects of six pyrimidine analogs (5-fluorouracil, floxuridine, 5'-deoxy-5-fluorouridine, 5-fluorouridine, gemcitabine, and cytarabine) on wild-type CU428 and conditional mutant NP1 Tetrahymena thermophila at room temperature and the restrictive temperature (37°C) where NP1 does not form the oral apparatus. We found that phagocytosis was not required for pyrimidine analog entry and that all tested pyrimidine analogs inhibited growth except for cytarabine. IC50 values did not significantly differ between CU428 and NP1 for the same analog at either room temperature or 37°C. To investigate the mechanism of inhibition, we used two pyrimidine bases (uracil and thymine) and three nucleosides (uridine, thymidine, and 5-methyluridine) to determine whether the inhibitory effects from the pyrimidine analogs were reversible. We found that the inhibitory effects from 5-fluorouracil could be reversed by uracil and thymine, from floxuridine could be reversed by thymidine, and from 5'-deoxy-5-fluorouridine could be reversed by uracil. None of the tested nucleobases or nucleosides could reverse the inhibitory effects of gemcitabine or 5-fluorouridine. Our results suggest that the five pyrimidine analogs act on different sites to inhibit T. thermophila growth and that nucleobases and nucleosides are metabolized differently in Tetrahymena.

Accuracy of implant site preparation in robotic navigated dental implant surgery.

BACKGROUND: Modern technological advancements have led to increase in the development of surgical robots in dentistry, resulting in excellent clinical treatment outcomes. PURPOSE: This study aimed to determine the accuracy of automatic robotic implant site preparation for different implant sizes by correlating planned and posttreatment positions, and to compare the performance of robotic and human freehand drilling. METHOD: Seventy-six drilling sites on partially edentulous models were used, with three different implant sizes (Ø = 3.5 × 10 mm, 4.0 × 10 mm, 5.0 × 10 mm). The robotic procedure was performed using software for calibration and step-by-step drilling processes. After robotic drilling, deviations in the implant position from the planned position were determined. The angulation, depth, and coronal and apical diameters on the sagittal plane of sockets created by human and robotic drilling were measured. RESULTS: The deviation of the robotic system was 3.78° ± 1.97° (angulation), 0.58 ± 0.36 mm (entry point), and 0.99 ± 0.56 mm (apical point). Comparison of implant groups showed the largest deviation from the planned position for 5 mm implants. On the sagittal plane, there were no significant differences between robotic and human surgery except for the 5-mm implant angulation, indicating similar quality between human and robotic drilling. Based on standard implant measurements, robotic drilling exhibited comparable performance to freehand human drilling. CONCLUSIONS: A robotic surgical system can provide the greatest accuracy and reliability regarding the preoperative plan for small implant diameters. In addition, the accuracy of robotic drilling for anterior implant surgery can also be comparable to that of human drilling.

The Treatment Efficiency and Microbiota Analysis of Sapindus mukorossi Seed Oil on the Ligature-Induced Periodontitis Rat Model.

Periodontitis is a common oral disease mainly caused by bacterial infection and inflammation of the gingiva. In the prevention or treatment of periodontitis, anti-bacterial agents are used to inhibit pathogen growth, despite increasing levels of bacterial resistance. Sapindus mukorossi Gaertn (SM) seed oil has proven anti-bacterial and anti-inflammation properties. However, the possibility of using this plant to prevent or treat periodontitis has not been reported previously. The aim of this study was to evaluate the effects of SM oil on experimental periodontitis in rats by using micro-CT and microbiota analysis. The distance between cementoenamel junction (CEJ) and alveolar bone crest (ABC) on the sagittal micro-CT slide showed that total bone loss (TBL) was significantly lower in CEJ-ABC distances between SM oil and SM oil-free groups on Day 14. Histology data also showed less alveolar bone resorption, a result consistent result with micro-CT imaging. The microbiota analyzed at phylum and class levels were compared between the SM oil and SM oil-free groups on Day 7 and Day 14. At the phylum level, Proteobacteria, Firmicutes, Bacteroidetes, and Actinobacteria were the dominant bacterium. Firmicutes in box plot analysis was significantly less in the SM oil group than in the SM oil-free group on Day 7. At the class level, Bacteroidia, Gammaproteobacteria, Bacilli, Clostridia, and Erysipelotrichia were the dominant bacteria. The bacteria composition proportion of Bacilli, Clostridiay, and Erysipelotrichia could be seen in the SM oil group significantly less than in t SM oil-free group on Day 7. Overall, the present results show that topical application of SM oil can reduce bone resorption and change bacteria composition in the ligature-induced periodontitis model. According to these results, it is reasonable to suggest SM oil as a potential material for preventing oral disease.

Cancer Cytotoxicity of a Hybrid Hyaluronan-Superparamagnetic Iron Oxide Nanoparticle Material: An In-Vitro Evaluation.

While hyaluronic acid encapsulating superparamagnetic iron oxide nanoparticles have been reported to exhibit selective cytotoxicity toward cancer cells, it is unclear whether low-molecular-weight hyaluronic acid-conjugated superparamagnetic iron oxide nanoparticles also display such cytotoxicity. In this study, high-molecular-weight hyaluronic acid was irradiated with γ-ray, while Fe3O4 nanoparticles were fabricated using chemical co-precipitation. The low-molecular-weight hyaluronic acid and Fe3O4 nanoparticles were then combined according to a previous study. Size distribution, zeta potential, and the binding between hyaluronic acid and iron oxide nanoparticles were examined using dynamic light scattering and a nuclear magnetic resonance spectroscopy. The ability of the fabricated low-molecular-weight hyaluronic acid conjugated superparamagnetic iron oxide nanoparticles to target cancer cells was examined using time-of-flight secondary ion mass spectrometry and T2* weighted magnetic resonance images to compare iron signals in U87MG human glioblastoma and NIH3T3 normal fibroblast cell lines. Comparison showed that the present material could target U87MG cells at a higher rate than NIH3T3 control cells, with a viability inhibition rate of 34% observed at day two and no cytotoxicity observed in NIH3T3 normal fibroblasts during the three-day experimental period. Supported by mass spectrometry images confirming that the nanoparticles accumulated on the surface of cancer cells, the fabricated materials can reasonably be suggested as a candidate for both magnetic resonance imaging applications and as an injectable anticancer agent.

Sequential Application of Calcium Phosphate and ε-Polylysine Show Antibacterial and Dentin Tubule Occluding Effects In Vitro.

In this study, ε-polylysine and calcium phosphate precipitation (CPP) methods were employed to induce antibacterial effects and dentin tubule occlusion. Antibacterial effects of ε-polylysine were evaluated with broth dilution assay against P. gingivalis. CPP solution from MCPM, DCPD, and TTCP was prepared. Four concentrations of ε-polylysine(ε-PL) solutions (0.125%, 0.25%, 0.5%, 1%) were prepared. Dentin discs were prepared from recently extracted human third molars. Dentin discs were incubated with P. gingivalis (ATCC 33277) bacterial suspension (ca. 105 bacteria) containing Brain Heart Infusion medium supplemented with 0.1 g/mL Vitamin K, 0.5 mg/mL hemin, 0.4 g/mL L-cysteine in anaerobic jars (37 °C) for 7 days to allow for biofilm formation. P. g-infected dentin specimens were randomly divided into four groups: CPP + 0.125% ε-PL, CPP + 0.25% ε-PL, CPP + 0.5% ε-PL, CPP + 1% ε-PL. On each dentin specimen, CPP solution was applied followed by polylysine solution with microbrush and immersed in artificial saliva. Precipitate formation, antibacterial effects, and occlusion of dentinal tubules were characterized in vitro over up to 72 h using scanning electron microscopy. ε-PL showed 34.97% to 61.19% growth inhibition levels against P. gingivalis (P. g) after 24 h of incubation. On P. g-infected dentin specimens, DCPD + 0.25% ε-PL, and DCPD + 0.5% ε-PL groups showed complete bacterial inhibition and 78.6% and 98.1% dentin tubule occlusion, respectively (p < 0.001). The longitudinal analysis on fractured dentin samples in DCPD and TTCP groups revealed deeply penetrated hydroxyapatite-like crystal formations in dentinal tubules after 72 h of incubation in artificial saliva.

Surface Modified ß-Tricalcium phosphate enhanced stem cell osteogenic differentiation in vitro and bone regeneration in vivo.

A major number of studies have demonstrated Beta-tricalcium phosphate (ß-TCP) biocompatibility, bioactivity, and osteoconductivity characteristics in bone regeneration. The aim of this research was to enhance ß-TCP's biocompatibility, and evaluate its physicochemical properties by argon glow discharge plasma (GDP) plasma surface treatment without modifying its surface. Treated ß-TCP was analyzed by scanning electron microscopy (SEM), energy-dispersive spectrometry, X-ray photoelectron spectroscopy (XPS), X-ray diffraction analysis, and Fourier transform infrared spectroscopy characterization. To evaluate treated ß-TCP biocompatibility and osteoblastic differentiation, water-soluble tetrazolium salts-1 (WST-1), immunofluorescence, alkaline phosphatase (ALP) assay, and quantitative real-time polymerase chain reaction (QPCR) were done using human mesenchymal stem cells (hMSCs). The results indicated a slight enhancement of the ß-TCP by GDP sputtering, which resulted in a higher Ca/P ratio (2.05) than the control. Furthermore, when compared with control ß-TCP, we observed an improvement of WST-1 on all days (p < 0.05) as well as of ALP activity (day 7, p < 0.05), with up-regulation of ALP, osteocalcin, and Osteoprotegerin osteogenic genes in cells cultured with the treated ß-TCP. XPS and SEM results indicated that treated ß-TCP's surface was not modified. In vivo, micro-computed tomography and histomorphometric analysis indicated that the ß-TCP test managed to regenerate more new bone than the untreated ß-TCP and control defects at 8 weeks (p < 0.05). Argon GDP treatment is a viable method for removing macro and micro particles of < 7 µm in size from ß-TCP bigger particles surfaces and therefore improving its biocompatibility with slight surface roughness modification, enhancing hMSCs proliferation, osteoblastic differentiation, and stimulating more new bone formation.

Glow Discharge Plasma Treatment on Zirconia Surface to Enhance Osteoblastic-Like Cell Differentiation and Antimicrobial Effects.

Peri-implantitis is the pathological condition of connective tissue inflammation and the progressive loss of supporting bone around dental implants. One of the primary causes of peri mucositis evolving into peri-implantitis is bacterial infection, including infection from Porphyromonas gingivalis. Enhancing the surface smoothness of implants helps to prevent P. gingivalis adhesion to the implant's surface. Interaction analyses between bacteria and the surface roughness of zirconia (Zr) discs subjected to a glow discharge plasma (GDP) treatment compared with non-plasma-treated autoclaved control Zr discs were done. Examinations of the material prosperities revealed that the GDP-treated Zr group had a smoother surface for a better wettability. The GDP-treated Zr discs improved the proliferation of the osteoblast-like cells MG-63, and the osteoblastic differentiation was assessed through alkaline phosphatase detection and marker gene bone sialoprotein (Bsp) and osteocalcin (OC) induction. Scanning electron microscopy demonstrated a relatively low P. gingivalis adhesion on GDP-treated Zr disks, as well as lower colonization of P. gingivalis compared with the control. Our findings confirmed that the GDP treatment of Zr discs resulted in a significant reduction of P. gingivalis adhesion and growth, demonstrating a positive correlation between surface roughness and bacteria adhesion. Therefore, the GDP treatment of Zr dental implants can provide a method for reducing the risk of peri-implantitis.

Physical and Biological Evaluation of Low-Molecular-Weight Hyaluronic Acid/Fe3O4 Nanoparticle for Targeting MCF7 Breast Cancer Cells.

Low-molecular-weight hyaluronic acid (LMWHA) was integrated with superparamagnetic Fe3O4 nanoparticles (Fe3O4 NPs). The size distribution, zeta potential, viscosity, thermogravimetric and paramagnetic properties of the LMWHA-Fe3O4 NPs were systematically examined. For cellular experiments, MCF7 breast cancer cell line was carried out. In addition, the cell targeting ability and characteristics of the LMWHA-Fe3O4 NPs for MCF7 breast cancer cells were analyzed using the thiocyanate method and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The experimental results showed that the LMWHA-Fe3O4 NPs were not only easily injectable due to their low viscosity, but also exhibited a significant superparamagnetic property. Furthermore, the in vitro assay results showed that the NPs had negligible cytotoxicity and exhibited a good cancer cell targeting ability. Overall, the results therefore suggest that the LMWHA-Fe3O4 NPs have considerable potential as an injectable agent for enhanced magnetic resonance imaging (MRI) and/or hyperthermia treatment in breast cancer therapy.

Antibacterial Effect of the Natural Polymer ε-Polylysine Against Oral Pathogens Associated with Periodontitis and Caries.

Antimicrobials are important adjuncts in the treatment of caries and periodontitis. However, increased bacterial resistance and hypersensitivity reactions to commonly used antimicrobials have led to an increasing demand for safe and natural substances. The objective of this study was to investigate the antibacterial effects of ε-polylysine against oral pathogens Streptococcus mutans and Porphyromonas gingivalis. Broth dilution assay, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) analyses were performed to explore the antibacterial effect of ε-polylysine against S. mutans strain ATCC25175 and P. gingivalis strain ATCC332277. For the test solution, ε-polylysine was added to the bacterial suspension to prepare 0.125%, 0.25%, 0.5% and 1% ε-polylysine solutions diluted in broth medium. All four concentrations demonstrated complete inhibition of S. mutans and significantly reduced viable cell counts of P. gingivalis after 24 h. From starting inoculum of 9.15 log CFU/mL, P. gingivalis cell counts reduced to 4.01 log CFU/mL in the 0.125% ε-polylysine treatment group. SEM, CLSM, and the LIVE/DEAD bacterial assay of ε-polylysine application on P. gingivalis biofilm-dentin specimens revealed bacterial cell membrane disruption and irregular cell morphologies. The results indicated satisfactory antibacterial efficacy of ε-polylysine against P. gingivalis and S. mutans in liquid medium and as an application on biofilm-dentin specimens.

Correction: Huang, H.-M., et al. Effects of Sapindus mukorossi Seed Oil on Skin Wound Healing: In Vivo and In Vitro Testing. Int. J. Mol. Sci. 2019, 20, 2579.

The authors are sorry to report that some of the HPLC data reported in their recently published paper [...].

Effects of Sapindus mukorossi Seed Oil on Skin Wound Healing: In Vivo and in Vitro Testing.

Sapindus mukorossi seed oil is commonly used as a source for biodiesel fuel. Its phytochemical composition is similar to the extracted oil from Sapindus trifoliatus seeds, which exhibit beneficial effects for skin wound healing. Since S. mukorossi seed shows no cyanogenic property, it could be a potential candidate for the treatment of skin wounds. Thus, we evaluated the effectiveness of S. mukorossi seed oil in the treatment of skin wounds. We characterized and quantified the fatty acids and unsaponifiable fractions (including ß-sitosterol and δ-tocopherol) contained in S. mukorossi seed-extracted oil by GC-MS and HPLC, respectively. Cell proliferation and migratory ability were evaluated by cell viability and scratch experiments using CCD-966SK cells treated with S. mukorossi oil. The anti-inflammatory effects of the oil were evaluated by measuring the nitric oxide (NO) production in lipopolysaccharide-treated RAW 264.7 cells. Antimicrobial activity tests were performed with Propionibacterium acnes, Staphylococcus aureus, and Candida albicans using a modified Japanese Industrial Standard procedure. Uniform artificial wounds were created on the dorsum of rats. The wounds were treated with a carboxymethyl cellulose (CMC)/hyaluronic acid (HA)/sodium alginate (SA) hydrogel for releasing the S. mukorossi seed oil. The wound sizes were measured photographically for 12 days and were compared to wounds covered with analogous membranes containing a saline solution. Our results showed that the S. mukorossi seed oil used in this study contains abundant monounsaturated fatty acids, ß-sitosterol, and δ-tocopherol. In the in vitro tests, S. mukorossi seed oil prompted cell proliferation and migration capability. Additionally, the oil had significant anti-inflammatory and anti-microbial activities. In the in vivo animal experiments, S. mukorossi seed oil-treated wounds revealed acceleration of sequential skin wound healing events after two days of healing. The size of oil-treated wound decreased to half the size of the untreated control after eight days of healing. The results suggest that S. mukorossi seed oil could be a potential source for promoting skin wound healing.

Enhancement of natural killer cell cytotoxicity by using static magnetic field to increase their viability.

Natural killer (NK) cells are innately immune to the body's immune system and can actively recognize and kill cancer cells. This study explores the potential for enhancing the killing ability of NK cells by co-culturing the NK cells with the target cells under a static magnetic field (SMF). In this study, NK92-MI cell lines were cultured in the presence of a 0.4-T SMF. The effect of the SMF on NK cell viability was evaluated by means of an MTT assay. Culturing tests were performed with inhibitors of the DAG/IP3, STAT3, ERK, JNK and p38 pathways in order to examine the possible signaling cascade responsible for the SMF effect on the NK92-MI cell viability. Finally, the effect of the SMF on the cytotoxicity of the NK92-MI cells was evaluated by co-culturing the NK cells with K562 leukemia cell lines. The results showed that the application of a 0.4-T SMF significantly increased (p < 0.05) the viability of the NK92-MI cells. Furthermore, the inhibitor tests indicated that the SMF affected cell viability by activating multiple MAPK signaling pathways (ERKs, JNKs, and p38-MAPK). Finally, SMF pre-exposure for 48 hr significantly improved the killing activity of the NK92-MI cells (p < 0.05). That is, pre-exposure to SMF increased the viability of the NK92-MI cells and improved their killing ability against K562 tumor cells. In general, the present results suggest that NK cells pre-exposed to 0.4-T SMF show potential as a tool for immune-therapy treatment of cancer.

Bone regeneration using a porcine bone substitute collagen composite in vitro and in vivo.

The biocharacteristics of xenogeneic grafts make them a possible substitute for autogenous bone grafts in dental bone graft procedures. This study aimed to develop a novel porcine graft with collagen capable of generating new bone in bone defects via osteoconduction over 8 weeks of healing and to compare it with a porcine graft. The porcine collagen graft was made to undergo a cell viability test (MTT) and alkaline phosphatase assay (ALP). The surgical procedure was performed in 20 male adult New Zealand white rabbits. Four calvarial critical-size defects of 6 mm in diameter were prepared in each rabbit. The upper left defect was filled with a porcine graft of 500-1000 µm, the upper right with a porcine collagen graft, the lower left with hydroxyapatite/beta-tricalcium phosphate and the lower right served as the control without any filling material. The rabbits were divided and sacrificed at 2, 4, 6 and 8 weeks after surgery. Histological and micro-CT scan results showed that the performance of the porcine collagen graft is superior for regenerating new bone. Porcine collagen graft showed cell viability and osteoblast-like cell differentiation in vitro. The results indicate that porcine collagen graft is a potential bone substitute for clinical application.

Limitation of the antibiotic-eluting bone graft substitute: An example of gentamycin-impregnated calcium sulfate.

Patients with inadequate volume of alveolar processes or bone defects commonly require graft substitutes in oral, maxillofacial or orthopedic surgery. Ridge augmentation and reconstruction of facial bony defects with bone graft materials achieve better outcomes in functional and aesthetic rehabilitation. The injectable calcium sulfate filler is used widely in intra-operative applications. Calcium sulfate bone filler has been shown to upregulate bone formation-related mRNA genes in vitro and improve osseointegration in vivo. In addition, the bone graft substitute can be used as a drug delivery system for antibiotics to treat or prevent infections based on the clinical experiences. However, the influences of antibiotics addition on the calcium sulfate are not fully understood. In this study, calcium sulfate impregnated with gentamycin in different weight ratios was characterized. The results showed that gentamycin prolonged the hydration process and extended initial/final setting times of calcium sulfate. The addition of gentamycin slowed the conversion from calcium sulfate hemihydrate to dihydrate and changed the crystalline phase and microstructure. Higher amounts of gentamycin added resulted in faster degradation and lower mechanical strength of calcium sulfate. This study reveals that the extended setting time, decreased compressive strength, and the accelerated degradation of the gentamycin-impregnated calcium sulfate bone graft substitutes should be considered during intra-operative applications. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 80-87, 2018.

Dental Implant Surrounding Marginal Bone Level Evaluation: Platform Switching versus Platform Matching-One-Year Retrospective Study.

The benefits and feasibility of platform switching have been discussed in several studies, reporting lesser crestal bone loss in platform-switched implants than in platform-matched implants. Objective. The aim of the present study was to observe the changes in vertical and horizontal marginal bone levels in platform-switched and platform-matched dental implants. Materials and Methods. 51 patients received 60 dental implants in the present study over a 1-year period. Measurement was performed between the implant shoulder and the most apical and horizontal marginal defect by periapical radiographs to examine the changes of peri-implant alveolar bone before and 12 months after prosthodontic restoration delivery. Results. These marginal bone measurements showed a bone gain of 0.23 ± 0.58 mm in the vertical gap and 0.22 ± 0.53 mm in the horizontal gap of platform matching, while in platform switching a bone gain of 0.93 ± 1 mm (P < 0.05) in the vertical gap and 0.50 ± 0.56 mm in the horizontal gap was found. The average vertical gap reduction from the baseline until 12 months was 0.92 ± 1.11 mm in platform switching and 0.29 ± 0.85 mm in platform matching (P < 0.05). Conclusions. Within the limitations of the present study, platform switching seemed to be more effective for a better peri-implant alveolar bone vertical and horizontal gap reduction at 1 year.

Lhx2 Expression in Postmitotic Cortical Neurons Initiates Assembly of the Thalamocortical Somatosensory Circuit.

Cortical neurons must be specified and make the correct connections during development. Here, we examine a mechanism initiating neuronal circuit formation in the barrel cortex, a circuit comprising thalamocortical axons (TCAs) and layer 4 (L4) neurons. When Lhx2 is selectively deleted in postmitotic cortical neurons using conditional knockout (cKO) mice, L4 neurons in the barrel cortex are initially specified but fail to form cellular barrels or develop polarized dendrites. In Lhx2 cKO mice, TCAs from the thalamic ventral posterior nucleus reach the barrel cortex but fail to further arborize to form barrels. Several activity-regulated genes and genes involved in regulating barrel formation are downregulated in the Lhx2 cKO somatosensory cortex. Among them, Btbd3, an activity-regulated gene controlling dendritic development, is a direct downstream target of Lhx2. We find that Lhx2 confers neuronal competency for activity-dependent dendritic development in L4 neurons by inducing the expression of Btbd3.

In Vitro and In Vivo Study of a Novel Porcine Collagen Membrane for Guided Bone Regeneration.

For years, in order to improve bone regeneration and prevent the need of a second stage surgery to remove non-resorbable membranes, biological absorbable membranes have gradually been developed and applied in guided tissue regeneration (GTR). The present study's main objective was to achieve space maintenance and bone regeneration using a new freeze-dried developed porcine collagen membrane, and compare it with an already commercial collagen membrane, when both were used with a bovine xenograft in prepared alveolar ridge bone defects. Prior to surgery, the membrane's vitality analysis showed statistically significant higher cell proliferation in the test membrane over the commercial one. In six beagle dogs, commercial bone xenograft was packed in lateral ridge bone defects prepared in the left and right side and then covered with test porcine collagen membrane or commercial collagen membrane. Alveolar height changes were measured. Histomorphometric results, in vitro and in vivo properties indicated that the new porcine collagen membrane is biocompatible, enhances bone xenograft osteoconduction, and reduces the alveolar ridge height reabsorption rate.

Modal damping factor detected with an impulse-forced vibration method provides additional information on osseointegration during dental implant healing.

PURPOSE: To evaluate whether resonance frequency (RF) analysis combined with modal damping factor (MDF) analysis provides additional information on dental implant healing status. MATERIALS AND METHODS: In in vitro tests, epoxy resin was used to simulate the implant healing process. The RF and MDF values of the implants were measured during the entire polymerization process. Implant stability quotient (ISQ) and Periotest values (PTVs) from Ostell and Periotest devices were used to validate the apparatus. In in vivo experiments, vibrational analysis was performed on 17 dental implants in 12 patients. The RF and MDF values of the tested implants were recorded during the first 10 weeks after surgery. The effects of jaw types and primary stability on MDF healing curves were analyzed. RESULTS: In the in vitro model, the RF values obtained from the apparatus used in this study were similar to those obtained from the Osstell device. Unlike the Periotest healing curve, the MDF curve showed a 1.8-fold increase during the early phase. In clinical experiments, the mean RF values were unchanged during the first 2 weeks and increased continuously until 6 weeks. The corresponding mean MDF value decreased over time and reached 0.045 ± 0.011 at 10 weeks, which is approximately 50% lower than the initial value. Although the RF values of the implants with higher initial frequency remained unchanged during the healing period, the MDF values decreased significantly. CONCLUSION: Analysis of RF combined with MDF provides additional information on dental implant healing status. MDF analysis can detect changes in the implant/bone complex during the healing period even in implants with higher RF values.