Magnetic raspberry-like CuCo nanoalloy-embedded carbon as an enhanced activator of Oxone to degrade azo contaminant: Cu-induced hollowed structure and boosted activities.

Azo compounds, particularly azo dyes, are widely used but pose significant environmental risks due to their persistence and potential to form carcinogenic by-products. Advanced oxidation processes (AOPs) are effective in degrading these stubborn compounds, with Oxone activation being a particularly promising method. In this study, a unique nanohybrid material, raspberry-like CuCo alloy embedded carbon (RCCC), is facilely fabricated using CuCo-glycerate (Gly) as a template. With the incorporation of Cu into Co, RCCC is essentially different from its analogue derived from Co-Gly in the absence of Cu, affording a popcorn-like Co embedded on carbon (PCoC). RCCC exhibits a unique morphology, featuring a hollow spherical layer covered by nanoscale beads composed of CuCo alloy distributed over carbon. Therefore, RCCC significantly outperforms PCoC and Co3O4 for activating Oxone to degrade the toxic azo contaminant, Azorubin S (AS), in terms of efficiency and kinetics. Furthermore, RCCC remains highly effective in environments with high NaCl concentrations and can be efficiently reused across multiple cycles. Besides, RCCC also leads to the considerably lower Ea of AS degradation than the reported Ea values by other catalysts. More importantly, the contribution of incorporating Cu with Co as CuCo alloy in RCCC is also elucidated using the Density-Function-Theory (DFT) calculation and synergetic effect of Cu and Co in CuCo contributes to enhance Oxone activation, and boosts generation of SO4•-and •OH. The decomposition pathway of AS by RCCC + Oxone is also comprehensively investigated by studying the Fukui indices of AS and a series of its degradation by-products using the DFT calculation. In accordance to the toxicity assessment, RCCC + Oxone also considerably reduces acute and chronic toxicities to lower potential environmental impact. These results ensure that RCCC would be an advantageous catalyst for Oxone activation to degrade AS in water.

Surgical Outcomes of Pancreatic Solid Pseudopapillary Neoplasm: Experiences of 24 Patients in a Single Institute.

Background and Objectives: The pancreatic solid pseudopapillary neoplasm (SPN), a rare tumor predominantly affecting young women, has seen an increased incidence due to improved imaging and epidemiological knowledge. This study aimed to understand the outcomes of different interventions, possible complications, and associated risk factors. Materials and Methods: This study retrospectively analyzed 24 patients who underwent pancreatic surgery for SPNs between September 1998 and July 2020. Results: Surgical intervention, typically required for symptomatic cases or pathological confirmation, yielded favorable outcomes with a 5-year survival rate of up to 97%. Despite challenges in standardizing preoperative evaluation and follow-up protocols, aggressive complete resection showed promising long-term survival and good oncological outcomes. Notably, no significant differences were found between conventional and minimally invasive (MI) surgery in perioperative outcomes. Histopathological correlations were lacking in prognosis and locations. Among the patients, one developed diffuse liver metastases 41 months postoperatively but responded well to chemotherapy and transcatheter arterial chemoembolization, with disease stability observed at 159 postoperative months. Another patient developed nonalcoholic steatohepatitis after surgery and underwent liver transplantation, succumbing to poor medication adherence 115 months after surgery. Conclusions: These findings underscore the importance of surgical intervention in managing SPNs and suggest the MI approach as a viable option with comparable outcomes to conventional surgery.

Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene.

The management of plastic waste (PW) has become an indispensable worldwide issue because of the enhanced accumulation and environmental impacts of these waste materials. Thermo-catalytic pyrolysis has been proposed as an emerging technology for the valorization of PW into value-added liquid fuels. This review provides a comprehensive investigation of the latest advances in thermo-catalytic pyrolysis of PW for liquid fuel generation, by emphasizing polyethylene, polypropylene, and polystyrene. To this end, the current strategies of PW management are summarized. The various parameters affecting the thermal pyrolysis of PW (e.g., temperature, residence time, heating rate, pyrolysis medium, and plastic type) are discussed, highlighting their significant influence on feed reactivity, product yield, and carbon number distribution of the pyrolysis process. Optimizing these parameters in the pyrolysis process can ensure highly efficient energy recovery from PW. In comparison with non-catalytic PW pyrolysis, catalytic pyrolysis of PW is considered by discussing mechanisms, reaction pathways, and the performance of various catalysts. It is established that the introduction of either acid or base catalysts shifts PW pyrolysis from the conventional free radical mechanism towards the carbonium ion mechanism, altering its kinetics and pathways. This review also provides an overview of PW pyrolysis practicality for scaling up by describing techno-economic challenges and opportunities, environmental considerations, and presenting future outlooks in this field. Overall, via investigation of the recent research findings, this paper offers valuable insights into the potential of thermo-catalytic pyrolysis as an emerging strategy for PW management and the production of liquid fuels, while also highlighting avenues for further exploration and development.

The Effectiveness of an Upper Limb Rehabilitation Program on Quality of Life in Breast Cancer Patients after Mastectomy: A Randomized Controlled Trial.

OBJECTIVE: This study aims to investigate the effectiveness of an upper limb rehabilitation program on the quality of life in patients who had been first diagnosed breast cancer and subsequently underwent mastectomy. DATA SOURCES: This randomized controlled trial enrolled 48 breast cancer patients who underwent mastectomy at a medical center in Taiwan. The patients were randomly assigned to either the intervention group (n = 24) or control group (n = 24). The patients in the intervention group participated in a 12-week upper limb rehabilitation program involving face-to-face upper limb rehabilitation education and once-a month monitoring of their upper extremity activity. The control group received standard nursing care. Quality of life was assessed through EORTC QLQ-C30 and QLQ-BR 23 questionnaires at baseline and weeks 4, 8, and 12 after enrollment. RESULTS: Both the intervention and control groups had significantly improved their levels of functioning, symptoms, and quality of life from baseline to week 12 after enrollment. The intervention group showed greater improvements in functioning and symptom levels after the intervention compared to the control group; however, no statistically significant differences were found. Additionally, the levels of global health status/quality of life in both groups gradually increased from baseline to week 12 CONCLUSION: An upper limb rehabilitation program is effective in improving the functioning and symptoms of breast cancer patients who have undergone mastectomy. IMPLICATIONS FOR NURSING PRACTICE: Patients are encouraged to undergo upper limb rehabilitation in order to improve their functioning, symptoms and quality of life.

First principal observation documenting the three-dimensional uptake of cadmium and spatial distribution of cadmium hydroxyapatite mineral in bone char.

The 3-D matrix scale ion-exchange mechanism was explored for high-capacity cadmium (Cd) removal using bone chars (BC) chunks (1-2 mm) made at 500 °C (500BC) and 700 °C (700BC) in aqueous solutions. The Cd incorporation into the carbonated hydroxyapatite (CHAp) mineral of BC was examined using a set of synchrotron-based techniques. The Cd removal from solution and incorporation into mineral lattice were higher in 500BC than 700BC, and the diffusion depth was modulated by the initial Cd concentration and charring temperature. A higher carbonate level of BC, more pre-leached Ca sites, and external phosphorus input enhanced Cd removal. The 500BC showed a higher CO32-/PO43- ratio and specific surface area (SSA) than the 700BC, providing more vacant sites by dissolution of Ca2+. In situ observations revealed the refilling of sub-micron pore space in the mineral matrix because of Cd incorporation.The X-ray nanodiffraction (XND) analyses revealed that Cd was mainly removed from water by incorporation into the mineral lattice of 500BC via ion exchange, rather than surface sorption and precipitation, and the mineral phase was transformed from hydroxyapatite (HAp) to cadmium hydroxyapatite (Cd-HAp). The Rietveld's refinement of X-ray diffraction (XRD) data resolved up to 91% of the crystal displacement of Ca2+ by Cd2+. The specific phase and stoichiometry of the new Cd-HAp mineral was dependent on the level of ion exchange. This mechanistic study confirmed that 3-D ion exchange was the most important path for heavy metal removal from aqueous solution and immobilization in BC mineral matrix, and put forward a novel and sustainable remediation strategy for Cd removal in wastewater and soil clean-up.

Oncological and functional outcomes of high-risk and very high-risk prostate cancer patients after robot-assisted radical prostatectomy.

PURPOSE: This study investigated the oncological and functional outcomes of robot-assisted radical prostatectomy (RaRP) in high-risk and very high-risk prostate cancer patients. MATERIALS AND METHODS: One hundred localized prostate cancer patients receiving RaRP from August 2015 to December 2020 were retrospectively enrolled. According to NCCN risk classification, patients were classified into two groups, below high-risk group, and high-risk/very high-risk group, to analyze continence outcome within postoperative year one and biochemical recurrence-free survival. RESULTS: The mean age of the cohort was 69.7 ± 7.4 years with a median follow-up of 26.4 (range 3.3-71.3) months. Among them, 53%, and 47% patients were below high-risk group, and high-risk/very high-risk group, respectively. The median biochemical recurrence-free survival of the entire cohort was 53.1 months. The high-risk/very high-risk group without adjuvant treatment had significantly worse biochemical recurrence-free survival than the high-risk/very high-risk group with adjuvant treatment (19.6 vs. 60.5 months, p = 0.029). Rates of postoperative stress urinary incontinence at 1 week, 1 month, and 12 months were 50.7%, 43.7%, and 8.5%, respectively. High-risk/very high-risk patients had significantly higher rates of stress urinary incontinence at postoperative week 1 (75.8% vs. 28.9%) and month 1 (63.6% vs. 26.3%) than the below high-risk group (both p < 0.01). Rates of stress urinary incontinence after RaRP did not differ between two groups from postoperative 3 months to 12 months. The factor of high-risk / very high-risk group was a predictor of immediate but not for long-term postoperative stress urinary incontinence. CONCLUSIONS: High-risk and very high-risk prostate cancer patients receiving a combination of RaRP and adjuvant treatment had comparable biochemical recurrence-free survival to below high-risk prostate cancer patients. The high-risk/very high-risk factor impeded early but not long-term postoperative recovery of continence. RaRP can be considered a safe and feasible option for high-risk and very high-risk prostate cancer patients.

Microalgae bio-oil production by pyrolysis and hydrothermal liquefaction: Mechanism and characteristics.

Microalgae have great potential in producing energy-dense and valuable products via thermochemical processes. Therefore, producing alternative bio-oil to fossil fuel from microalgae has rapidly gained popularity due to its environmentally friendly process and elevated productivity. This current work aims to review comprehensively the microalgae bio-oil production using pyrolysis and hydrothermal liquefaction. In addition, core mechanisms of pyrolysis and hydrothermal liquefaction process for microalgae were scrutinized, showing that the presence of lipids and proteins could contribute to forming a large amount of compounds containing O and N elements in bio-oil. However, applying proper catalysts and advanced technologies for the two aforementioned approaches could improve the quality, heating value, and yield of microalgae bio-oil. In general, microalgae bio-oil produced under optimal conditions could have 46 MJ/kg heating value and 60% yield, indicating that microalgae bio-oil could become a promising alternative fuel for transportation and power generation.

Environmental benefits from the use of CO2 in the thermal disposal of cigarette butts.

As the global consumption of cigarettes has increased, the massive generation of cigarette butts (CBs) has led to critical environmental and health problems. Landfilling or incineration of CBs has been conventionally carried out, but such disposal protocols have suffered from the potential risks of the unwanted/uncontrolled release of leachates, carcinogens, and toxic chemicals into all environmental media. Thus, this study focuses on developing an environmentally dependable method for CB disposal. Littered CBs from filtered/electronic cigarettes were valorized into syngas (H2/CO). To seek a greener approach for the valorization of CBs, CO2 was intentionally considered as a reaction intermediate. Prior to multiple pyrolysis studies, the toxic chemicals in the CBs were qualitatively determined. This study experimentally proved that the toxic chemicals in CBs were detoxified/valorized into syngas. Furthermore, this work demonstrated that CO2 was effective in thermally destroying toxic chemicals in CBs via a gas-phase reaction. The reaction features and CO2 synergistically enhance syngas production. With the use of a supported Ni catalyst and CO2, syngas production from the catalytic pyrolysis of CBs was greatly enhanced (approximately 4 times). Finally, the gas-phase reaction by CO2 was reliably maintained owing to the synergistic mechanistic/reaction feature of CO2 for coke formation prevention on the catalyst surface.

Advances in soot particles from gasoline direct injection engines: A focus on physical and chemical characterisation.

With an increasing market share of gasoline direct injection (GDI) vehicles, high particulate emissions of GDI engines are of increasing concern due to their adverse impacts on both human health and the ecological environment. A thorough understanding of GDI nanoparticulate properties is required to develop advanced particulate filters and assess the exhaust toxicity and environmental impacts. To this end, this paper aims to provide a comprehensive review of the physical and chemical characteristics of GDI nanoparticles from a distinctive perspective, including soot oxidation reactivity, morphology, nanostructure, surface chemistry, chemical components, and their correlations. This review begins with a brief description of nanoparticle characterisation methods. Then, the nanoparticle characteristics of GDI engines are reviewed with the following aspects: in-cylinder soot, exhaust particulate features, and a comparison between GDI and diesel nanoparticles. Previous studies showed that exhaust nanoparticle presents a more stable nanostructure and is less prone to oxidation if compared with in-cylinder soot. Additionally, GDI particles are less-ordered, more inorganic and metallic containing, and more reactive than diesel particles. Afterwards, the impacts of engine operating parameters and aftertreatments on GDI soot features are discussed in detail. Finally, the conclusions and future research recommendations are presented.

Progressive yield of nickel cobaltite nanocubes for visible light utilization and degrading activities of methyl orange dye pollutant.

In this study, pure cobalt oxide (Co3O4) as well as nickel cobaltite (NiCo2O4) were investigated with their capacity of degradation efficiency for textile dyes like methyl orange (MO) employing visible light irradiation. Two variable concentrations of nickel cobaltite (NiCo2O4) with 75:25 and 50:50 wt ratios along with the pure metal oxides were synthesized by thermal decomposition method and analyzed by various sophisticated instruments. Initially, the structural characteristics described the fine crystalline nature of NiCo2O4 and also exhibits reduced size than the pure component material (Co3O4). Besides, NiCo2O4 catalysts represented nano cubic shaped particles, and also their coordinating functional groups were evaluated. Further, the absorption wavelength confirms the two band positions of NiCo2O4 which leads to promote visible light absorption, and degrading efficiency of about 47.5% for NiCo2O4 (75:25) sample compared with NiCo2O4 (50:50) which produced only 26.3% degradation. This higher efficiency of the former was due to high crystallinity and interfacial charge transfer of combined Ni2+, Ni3+, Co2+ and Co3+ redox couples. This consecutively produces effective OH radicals that brought the degradation effectively under visible light. The recycling capacity up to 5 repeated cycles has been studied with the NiCo2O4 (75:25) and therefore the catalyst can further be used in other dye degradation.

Household food waste conversion to biohydrogen via steam gasification over copper and nickel-loaded SBA-15 catalysts.

Household food waste (FW) was converted into biohydrogen-rich gas via steam gasification over Ni and bimetallic Ni (Cu-Ni and Co-Ni) catalysts supported on mesoporous SBA-15. The effect of catalyst method on steam gasification efficiency of each catalyst was investigated using incipient wetness impregnation, deposition precipitation, and ethylenediaminetetraacetic acid metal complex impregnation methods. H2-TPR confirmed the synergistic interaction of the dopants (Co and Cu) and Ni. Furthermore, XRD and HR-TEM revealed that the size of the Ni particle varied depending on the method of catalyst synthesis, confirming the formation of solid solutions in Co- or Cu-doped Ni/SBA-15 catalysts due to dopant insertion into the Ni. Notably, the exceptional activity of the Cu-Ni/SBA-15-EMC catalyst in FW steam gasification was attributed to the fine distribution of the concise Ni nanoparticles (9 nm), which resulted in the highest hydrogen selectivity (62 vol%), gas yield (73.6 wt%). Likewise, Cu-Ni solid solution decreased coke to 0.08 wt%.

Clinicopathologic characteristics of incidental thyroid carcinoma in euthyroid patients receiving total thyroidectomy for multinodular goiter: A retrospective cohort study.

BACKGROUND: Total thyroidectomy is the treatment of choice for multinodular goiter (MNG). In some of these cases, incidental thyroid cancer (ITC) is detected postoperatively. Papillary thyroid microcarcinoma (PTMC), the most common type of ITC, has clinical factors and pathologic similarities with ITC that have not been well clarified previously. We investigated the incidence and characteristics of ITC and PTMC in euthyroid patients undergoing total thyroidectomy for MNG. METHODS: We retrospectively investigated the data of 151 euthyroid patients who underwent total thyroidectomy for MNG between January 2016 and December 2020. Patients with PTMC were then selected from among those with ITC for further data analysis. RESULTS: The incidence rates of ITC and PTMC were 31.1% (47/151) and 21.1% (32/151), respectively. The mean age of patients with ITC was 52.8 ± 11.7 years, which was younger than that of patients with benign MNG (57.2 ± 12.5 years, p < 0.05). Bilateral cancer was observed in 17 patients with ITC (17/47, 36.2%) and nine with PTMC (9/32, 28.1%). The numbers of patients in the ITC and PTMC groups whose cancer was not on the side comprising the dominant tumor were 15 (15/47, 31.9%) and 13 (13/32, 40.6%), respectively. The multivariate analysis demonstrated that younger age was a clinical factor associated with ITC and PTMC. CONCLUSION: Younger age is a clinical factor for ITC and PTMC. We recommend taking considering clinical factors and pathologic characteristics of ITC and PTC when considering total thyroidectomy in euthyroid patients with MNG.

Co-pyrolysis of microalgae and other biomass wastes for the production of high-quality bio-oil: Progress and prospective.

Microalgae are the most prospective raw materials for the production of biofuels, pyrolysis is an effective method to convert biomass into bioenergy. However, biofuels derived from the pyrolysis of microalgae exhibit poor fuel properties due to high content of moisture and protein. Co-pyrolysis is a simple and efficient method to produce high-quality bio-oil from two or more materials. Tires, plastics, and bamboo waste are the optimal co-feedstocks based on the improvement of yield and quality of bio-oil. Moreover, adding catalysts, especially CaO and Cu/HZSM-5, can enhance the quality of bio-oil by increasing aromatics content and decreasing oxygenated and nitrogenous compounds. Consequently, this paper provides a critical review of the production of bio-oil from co-pyrolysis of microalgae with other biomass wastes. Meanwhile, the underlying mechanism of synergistic effects and the catalytic effect on co-pyrolysis are discussed. Finally, the economic viability and prospects of microalgae co-pyrolysis are summarized.

Assessment of the emission factors for potentially toxic elements from coal-fired boilers and sintering furnaces in a steel production plant.

The emission factor (EF), the weight of potentially toxic elements (PTEs) per unit energy or weight of sinter produced were evaluated for coal-fired boilers and sintering furnaces integrated in a steel plant. From three coal-fired boilers, 15 samples were taken while 22 samples were taken from four sintering furnaces. Investigations were performed on the EF of lead, cadmium, mercury, arsenic and chromium (VI). The coefficient of variance for the first 3 samples from each PTE was used to decide whether 2 more samples were necessary for the investigation. Three samples were sufficient for Cr (VI), however, 5 samples were required for Pb, Cd, Hg, and As, since the variances in concentrations of the first three samples exceeded 20%. The ranges for the ratio of the laboratory-based EF to the default EF applied by the Environment Protection Administration (EPA Taiwan) for Pb, Cd, Hg, and As for the coal-fired boiler were 0.08-0.013, 0.014-0.017, 0.019-0.033, 0.047-0.066 and for the sintering furnaces were 0.059-0.232, 0.05-0.151, 0.05-0.364, and 0.067-0.824. The ratio for Cr (VI)- was constant at 0.005 for all the coal fired boilers while it ranged from 0.057-0.709 for the sintering furnaces. Whilst source identification, enrichment factors, and spatial distributions for PTEs are often studied, laboratory-based investigations on the EFs for PTEs from industrial plants are rarely performed. This study filled the information gap and compared the obtained EFs with the EPA default values. To avoid overcharging industrial plants equipped with the best available technology for emission control, the EPA should apply field investigations and laboratory-based EFs instead of the default EPA EFs to calculate air pollution fees. Insights from this investigation can be applied to promote the adoption of appropriate air pollution control devices to cut down the emission of PTEs.

Pyrolysis: An effective technique for degradation of COVID-19 medical wastes.

COVID-19 has led to the enormous rise of medical wastes throughout the world, and these have mainly been generated from hospitals, clinics, and other healthcare establishments. This creates an additional challenge in medical waste management, particularly in developing countries. Improper managing of medical waste may have serious public health issues and a significant impact on the environment. There are currently three disinfection technologies, namely incineration, chemical and physical processes, that are available to treat COVID-19 medical waste (CMW). This study focuses on thermochemical process, particularly pyrolysis process to treat the medical waste. Pyrolysis is a process that utilizes the thermal instability of organic components in medical waste to convert them into valuable products. Besides, the technique is environmentally friendly, more efficient and cost-effective, requires less landfill capacity, and causes lower pollution. The current pandemic situation generates a large amount of plastic medical wastes, which mainly consists of polyethylene, polypropylene, polystyrene, polyethylene terephthalate, and nylon. These plastic wastes can be converted into valuable energy products like oil, gas and char through pyrolysis process. This review provides detailed information about CMW handling, treatment, valuable product generation, and proper discharge into the open environment.

Postoperative quality of life and cosmetic outcome between minimally invasive video-assisted thyroidectomy and bilateral axillo-breast approach robotic thyroidectomy: a single center retrospective cohort study.

Different approaches to endoscopic thyroidectomy utilize incisions that result in inevitable physical trauma to patients since postoperative tissue fibrosis and scars will influence their quality of life for a lifetime. Over the past few years, most studies have discussed the safety concerns of different kinds of endoscopic thyroidectomy; conversely, there has been less discussion on postoperative quality of life. Because most patients undergoing thyroidectomy for cancer or benign diseases are likely to have long-term survival, it is essential to study the cosmetic outcome of patients' scars from minimally invasive video-assisted thyroidectomy (MIVAT) and bilateral axillo-breast approach (BABA) robotic thyroidectomy on quality of life. From July 2015 to December 2017, 95 patients-60 who underwent MIVAT and 35 who underwent BABA robotic thyroidectomy-were retrospectively studied. Patient demographics, operative indications, pathologic findings, pain scores after surgery, complications, perception of scars, and overall satisfaction were compared between the two groups. The cosmetic outcome and overall satisfaction were evaluated at least 2 years after the operation using the patient scar assessment questionnaire and the 36-item short form health survey (SF-36). There was no statistically significant difference in scar perception between the two groups. However, in the SF-36, the MIVAT group had better satisfaction than the BABA robotic group regarding general health, vitality, mental health, and health change. MIVAT and BABA robotic thyroidectomy can be safely performed in selected patients, and patients who underwent MIVAT had better postoperative qualities of life than those who underwent the BABA robotic approach.

Synthesis of renewable heterogeneous acid catalyst from oil palm empty fruit bunch for glycerol-free biodiesel production.

Interest in biodiesel research has escalated over the years due to dwindling fossil fuel reserves. The implementation of a carbon-based solid acid catalyst in biodiesel production eradicates the separation problems associated with homogeneous catalysis. However, its application in the glycerol-free interesterification process for biodiesel production is still rarely being studied in the literature. In this study, novel environmentally benign catalysts were prepared from oil palm empty fruit bunch (OPEFB) derived activated carbon (AC) which is sustainable and low cost via direct sulfonation using concentrated sulfuric acid. The effects of synthesizing variables such as carbonization and sulfonation temperatures with different holding times towards the fatty acid methyl ester (FAME) yield in interesterification reaction with oleic acid and methyl acetate were investigated in detail. It was found that the optimum carbonization temperature and duration together with sulfonation temperature and duration were 600 °C, 3 h, 100 °C and 6 h, respectively. The catalyst possessed an amorphous structure with a high total acid density of 9.0 mmol NaOH g-1 due to the well-developed porous framework structure of the carbon support. Under these optimum conditions, the OPEFB derived solid acid catalyst recorded an excellent catalytic activity of 50.5% methyl oleate yield at 100 °C after 8 h with 50:1 methyl acetate to oleic acid molar ratio and 10 wt% catalyst dosage. The heterogeneous acid catalyst derived from OPEFB had shown promising properties that made them highly suitable for cost-effective and environmental-friendly glycerol-free biodiesel production.

Kinetics and thermodynamics dataset of iron oxide reduction using torrefied microalgae for chemical looping combustion.

The reduction of iron oxides transpires through the application of heat wherein a carbon source known as reductant is required. In order to design a chemical looping combustion using iron as an oxygen carrier and torrefied microalgae biomass as a reductant, the kinetics and thermodynamics dataset must be determined. Using the Arrhenius law of reaction, the kinetics dataset was obtained employing the three chemical reaction model such as the first order (C1), the reaction order 1.5 (C1.5), and the second-order (C2). The iron oxide reduction from hematite to metallic iron was sub-divided into three phases wherein phase 1 (Fe2O3 → Fe3O4) is from 365 °C to 555 °C, phase 2 (Fe3O4 → FeO) is from 595 °C to 799 °C, and phase 3 (FeO → Fe) is from 800 °C to 1200 °C. Two torrefied microalgae (Chlamydomonas sp. JSC4 and Chlorella vulgaris ESP-31) were considered as a reducing agent. The kinetics dataset comprise of the activation energy (E), pre-exponential factor (A), and the reaction rate (k) while the thermodynamic dataset consists of the change in enthalpy (ΔH), change in Gibbs energy (ΔG), and change in entropy (ΔS). These kinetics and thermodynamics parameters are essential in understanding the reaction mechanisms of the reduction process of iron oxides enabling process optimization and improvement. Current literature lacks the kinetics and thermodynamics datasets for the reduction of iron oxides using the two torrefied microalgae as reductants. This work provides these datasets which are useful for the design of reactors in chemical looping combustion.

Anterior nucleus of paraventricular thalamus mediates chronic mechanical hyperalgesia.

Pain-related diseases are the top leading causes of life disability. Identifying brain regions involved in persistent neuronal changes will provide new insights for developing efficient chronic pain treatment. Here, we showed that anterior nucleus of paraventricular thalamus (PVA) plays an essential role in the development of mechanical hyperalgesia in neuropathic and inflammatory pain models in mice. Increase in c-Fos, phosphorylated extracellular signal-regulated kinase, and hyperexcitability of PVA neurons were detected in hyperalgesic mice. Direct activation of PVA neurons using optogenetics and pharmacological approaches were sufficient to induce persistent mechanical hyperalgesia in naive animals. Conversely, inhibition of PVA neuronal activity using DREADDs (designer receptors exclusively activated by designer drugs) or inactivation of PVA extracellular signal-regulated kinase at the critical time window blunted mechanical hyperalgesia in chronic pain models. At the circuitry level, PVA received innervation from central nucleus of amygdala, a known pain-associated locus. As a result, activation of right central nucleus of amygdala with blue light was enough to induce persistent mechanical hyperalgesia. These findings support the idea that targeting PVA can be a potential therapeutic strategy for pain relief.

Effect of torrefaction pretreatment on the pyrolysis of rubber wood sawdust analyzed by Py-GC/MS.

The aim of this study was to investigate the effect of torrefaction on the pyrolysis of rubber wood sawdust (RWS) using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Three typical torrefaction temperatures (200, 250, and 300 °C) and pyrolysis temperatures (450, 500, and 550 °C) were considered. The results suggested that only diethyl phthalate, belonging to esters, was detected at the torrefaction temperatures of 200 and 250 °C, revealing hemicellulose degradation. With the torrefaction temperature of 300 °C, esters, aldehydes, and phenols were detected, suggesting the predominant decomposition of hemicellulose and lignin. The double-shot pyrolysis indicated that the contents of oxy-compounds such as acids and aldehydes in pyrolysis bio-oil decreased with rising torrefaction temperature, implying that increasing torrefaction severity abated oxygen content in the bio-oil. With the torrefaction temperature of 300 °C, relatively more cellulose was retained in the biomass because the carbohydrate content in the pyrolysis bio-oil increased significantly.