Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

Three-dimensional evaluation of skeletal stability after surgery-first bimaxillary surgery for class III asymmetry in 70 consecutive patients.

Background/purpose: Skeletal stability after orthognathic surgery is essential for positive treatment outcome. This study evaluated the stability of osteotomy segments after surgery-first bimaxillary surgery for class III asymmetry. Materials and methods: Seventy adults with class III asymmetry consecutively corrected through surgery-first Le Fort I and bilateral sagittal split osteotomies were investigated. Cone-beam computed tomography before treatment (T0), 1-week after surgery (T1), and after all treatment (T2, ≥1-year after surgery) was used to assess surgical movement (T0 to T1) and skeletal stability (T1 to T2) regarding the translation and rotation of the maxillary, mandibular distal, and proximal segments. Results: At T1, the maxillary segment had moved forward and upward, turned to the deviated side, and rotated downward (all P < 0.01). The distal segment of mandible had moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment had moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment had moved upward and tilted to the deviated side (both P < 0.01). At T2, significant relapse occurred in the mandible. The distal segment moved forward and upward and rotated upward (all P < 0.001). The deviated proximal segment moved upward, tilted to the opposite side, and rotated upward (all P < 0.001). The opposite proximal segment moved upward and tilted to the deviated side (both P < 0.01). Conclusion: Clinically significant relapse of class III asymmetry was discovered on the mandibular distal and opposite proximal segments.

Surgery-First Orthognathic Approach for Correction of Dentofacial Deformity in Unilateral Cleft Lip and Palate.

BACKGROUND: Although several studies have reported the advantages of the surgery-first approach for orthognathic correction of class III deformity, there is no report of the success of this approach for patients with cleft lip and palate. Therefore, the purpose of this study was to evaluate the stability and outcome of bimaxillary surgery for cleft-related dentofacial deformity using a surgery-first approach. METHODS: Forty-one patients with unilateral cleft lip and palate who consecutively underwent Le Fort I and bilateral sagittal split osteotomies for skeletal class III deformity were included. Cone-beam computed tomographic scans before surgery, 1 week after surgery, and after orthodontic treatment were used to measure the surgical and postsurgical changes in jaw position by landmarks, and outcomes of jaw protrusion and relation, incisor angle and occlusion, and menton deviation after treatment. Self-report questionnaires regarding satisfaction with overall appearance of the face and seven facial regions were administered after treatment. RESULTS: A clinically insignificant relapse was found in the maxilla (<1 mm) and mandible (<2 mm). There was a significant improvement in the jaw protrusion and relation, incisor angle and occlusion, and menton deviation. Responses from the self-report questionnaires completed after treatment indicated that patient satisfaction was high. CONCLUSION: These findings demonstrate surgical-orthodontic treatment with a surgery-first approach can successfully improve cleft-related dentofacial deformity in patients with unilateral cleft lip and palate. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Surgical occlusion setup and skeletal stability of correcting cleft-associated class III deformity using surgery-first bimaxillary surgery.

BACKGROUND: This study aimed to assess the three-dimensional (3D) quantitative characteristics of the surgical occlusion setup in surgery-first cleft orthognathic surgery, and to evaluate its influence on post-surgical skeletal stability. METHODS: This prospective study was comprised of 35 patients with unilateral cleft lip and palate and class III deformity who consecutively underwent two-jaw surgery with surgery-first approach. Digitized dental models were analyzed to quantify the 3D characteristics of the final surgical occlusion setup. Cone-beam computed tomography was used to measure the 3D surgical skeletal movement and post-surgical skeletal stability. The correlation between skeletal stability and surgical occlusal contact or surgical skeletal movement was also evaluated. RESULTS: The surgical occlusion setup had a large incisor overjet and positive overbite, and buccal cross bite and open bite on second molars. Occlusal contact on three segments was present in 51.4% of the patients, and the average number for tooth contact was 4.3 teeth. No correlation was found between maxillary or mandibular stability and surgical occlusal contact. However, a significant correlation was found between maxillary and mandibular stability and the surgical skeletal movement. CONCLUSIONS: The surgical occlusion for correction of cleft-associated class III deformity using the surgery-first approach was characterized with large overjet and positive overbite, and posterior cross bite and open bite. On average, there was occlusal contact on four to five teeth; half of surgical occlusion setups had contact on three segments. The post-surgical skeletal stability was not related to the surgical occlusal contact but to the surgical skeletal movement.

Comparison of regional soft tissue changes after bimaxillary rotational surgery between class III deformity with overbite and open bite: A 3D imaging analysis.

BACKGROUND: This prospective study aimed to compare regional soft tissue changes between patients with class III overbite and open bite deformities treated with bimaxillary surgery involving clockwise and counter-clockwise mandibular setback, respectively. MATERIAL AND METHODS: Class III deformity adults receiving Le Fort I and bilateral sagittal split osteotomies were grouped according to the incisal occlusion: overbite (n = 30) and open bite (n = 30). Combined cone-beam CT scans and 3D facial photographs preoperative and at least 1-year postoperative were taken to assess the soft tissue changes. RESULTS: Postoperative changes for the overbite and open bite groups included anterior repositioning of nose (-0.8 ± 1.2 mm and -1.1 ± 1.1 mm, respectively) and cheek (-1.9 ± 1.3 mm and -1.7 ± 2.6 mm, respectively), posterior repositioning of chin (5.2 ± 4.0 mm and 4.9 ± 3.2 mm, respectively), and medial (-1.7 ± 2.0 mm and -1.9 ± 2.1 mm, respectively) and posterior (2.7 ± 1.4 mm and 2.8 ± 2.3 mm, respectively) repositioning of bilateral angles. Posterior (1.2 ± 2.0 mm and 5.1 ± 3.3 mm) and inferior (-1.4 ± 2.2 mm and -2.4 ± 2.7 mm) repositioning of upper lip and lower lip occurred in overbite group. Inferior (-2.3 ± 2.4 mm) and superior (3.7 ± 3.4 mm) repositioning of chin occurred in the overbite and open bite groups, respectively. CONCLUSIONS: Treatment of class III overbite and open bite deformities with bimaxillary rotational surgery resulted in comparable regional soft tissue changes, except for upper lip, lower lip and chin.

PD-L1 and AKT Overexpressing Adipose-Derived Mesenchymal Stem Cells Enhance Myocardial Protection by Upregulating CD25+ T Cells in Acute Myocardial Infarction Rat Model.

This study explores the synergistic impact of Programmed Death Ligand 1 (PD-L1) and Protein Kinase B (Akt) overexpression in adipose-derived mesenchymal stem cells (AdMSCs) for ameliorating cardiac dysfunction after myocardial infarction (MI). Post-MI adult Wistar rats were allocated into four groups: sham, MI, ADMSC treatment, and ADMSCs overexpressed with PD-L1 and Akt (AdMSC-PDL1-Akt) treatment. MI was induced via left anterior descending coronary artery ligation, followed by intramyocardial AdMSC injections. Over four weeks, cardiac functionality and structural integrity were assessed using pressure-volume analysis, infarct size measurement, and immunohistochemistry. AdMSC-PDL1-Akt exhibited enhanced resistance to reactive oxygen species (ROS) in vitro and ameliorated MI-induced contractile dysfunction in vivo by improving the end-systolic pressure-volume relationship and preload-recruitable stroke work, together with attenuating infarct size. Molecular analyses revealed substantial mitigation in caspase3 and nuclear factor-κB upregulation in MI hearts within the AdMSC-PDL1-Akt group. Mechanistically, AdMSC-PDL1-Akt fostered the differentiation of normal T cells into CD25+ regulatory T cells in vitro, aligning with in vivo upregulation of CD25 in AdMSC-PDL1-Akt-treated rats. Collectively, PD-L1 and Akt overexpression in AdMSCs bolsters resistance to ROS-mediated apoptosis in vitro and enhances myocardial protective efficacy against MI-induced dysfunction, potentially via T-cell modulation, underscoring a promising therapeutic strategy for myocardial ischemic injuries.

Acute and Subacute Toxicity of Fluorescent Gold Nanoclusters Conjugated with α-Lipoic Acid.

Fluorescent gold nanoclusters conjugated with α-lipoic acid (FANC) is a promising biocompatible fluorescent nanomaterial with a high potential for drug development. However, there is still no FANC-related research on toxicology, which is very important for future research and the development of healthy food supplements or drugs. This study uses oral administration of FANC to determine the most appropriate dose range in ICR mice for further evaluation. The in vivo acute and subacute toxicity study was conducted by oral administration of FANC to male and female ICR mice. Animal survival, body weight, daily food consumption, hematological profile, organ coefficient, serum biochemistry profile, and histopathological changes were analyzed. FANC did not show any form of morbidity or mortality at acute and subacute toxicity in both male and female ICR mice. Animal behavior, daily food consumption, hematological profile, organ coefficient, and histopathology showed no treatment-related malignant changes at single and repeated doses. Furthermore, serum glutamic-oxaloacetic transaminase (GOT), glutamic-pyruvic transaminase (GPT), lactate dehydrogenase (LDH), blood urea nitrogen (BUN), and creatinine (CRE) levels showed no significant malignant changes, which indicated that FANC does not cause liver and renal damage. The only change observed in this study was the change in body weight. The body weight of the FANC-treated group was slightly decreased in female mice but increased in male mice; however, the body weight decreases were below the threshold of concern, and there was no dose-response effect. In conclusion, no observed adverse effect level (NOAEL) in repeated doses was considered in 20 µM/100 µL/25 g male and female ICR mice.

Is the pattern of mandibular asymmetry in mild craniofacial microsomia comparable to non-syndromic class II asymmetry?

OBJECTIVES: To compare the characteristics of mandibular asymmetry in patients with unilateral craniofacial microsomia (CFM) and class II asymmetry. MATERIALS AND METHODS: Pretreatment cone-beam computed tomography of consecutive adults with Pruzansky-Kaban type I and IIA CFM (CFM group) was analyzed by 3D cephalometry. Fourteen mandibular landmarks and two dental landmarks were identified. The mandibular size and positional asymmetry were calculated by using landmark-based linear and volumetric measurements, in terms of asymmetry ratios (affected/non-affected side) and absolute differences (affected - non-affected side). Results were compared with non-syndromic class II with matched severity of chin deviation (Class II group). Statistical analyses included independent t test, paired t test, chi-square test, and ANOVA. RESULTS: CFM group (n, 21; mean age, 20.4 ± 2.5 years) showed significantly larger size asymmetry in regions of mandibular body, ramus, and condyle compared to Class II group (n, 21; mean age, 27.8 ± 5.9 years) (p < 0.05). The curvature of mandibular body was asymmetric in CFM. Regarding the positional asymmetry of mandibular body, while a comparable transverse shift and a negligible yaw rotation were found among the two groups, the roll rotation in CFM was significantly greater as well as the occlusal (6.06° vs. 4.17°) and mandibular (7.84° vs. 2.80°) plane cants (p < 0.05). CONCLUSIONS: Mild CFM showed significantly more severe size asymmetry and roll rotation in mandible than non-CFM class II asymmetry. CLINICAL RELEVANCE: To improve the mandibular size and positional asymmetry in CFM, adjunct hard tissue augmentation or reduction in addition to OGS orthodontics with a meticulous roll and yaw planning is compulsory, which is expected to be distinct from treating non-CFM class II asymmetry.

Three-Dimensional Analysis of the Condylar Hypoplasia and Facial Asymmetry in Craniofacial Microsomia Using Cone-Beam Computed Tomography.

PURPOSE: To assess the condylar hypoplasia and its correlation with craniofacial deformities in adults with unilateral craniofacial microsomia (CFM). METHODS: Pretreatment cone-beam computed tomography scans of consecutive adults (mean age: 20.4 ± 3.0 years; range: 17.3 to 31.4 years) with Pruzansky-Kaban type I and IIA CFM were reconstructed in 3D. Both condyles were segmented. Asymmetry ratios (affected side/contralateral side) of condylar volume were calculated to indicate the extent of condylar hypoplasia. 3D cephalometry was performed to quantify the maxillomandibular morphology and facial asymmetry. The correlations in between were assessed by using Pearson's or Spearman's correlation coefficients. RESULTS: Thirty-six subjects were enrolled, consisting of 22 subjects with Pruzansky-Kaban type I and 14 subjects with type IIA. The condyles in type IIA group were significantly more hypoplastic in height (asymmetry ratio: 40.69 vs 59.95%, P = .006) and volume (18.16 vs 47.84%, P < .001) compared to type I group. Type IIA group had a significantly smaller SNB value than type I group (72.94° vs 77.41°, P = .012), and a significantly greater facial asymmetry (P < .05). The hypoplastic extent of condylar volume and Pruzansky-Kaban types were significantly correlated with SNB (r = 0.457 and ρ = -0.411, respectively), upper incisor deviation (r = -0.446 and ρ = 0.362), chin deviation (r = -0.477 and ρ = 0.527), upper occlusal plane cant (r = -0.672 and ρ = 0.631), and mandibular plane cant (r = -0.557 and ρ = 0.357, P < .05). CONCLUSION: For unilateral CFM adults, greater condylar hypoplasia in volume along with more severe mandibular retrusion and facial asymmetry objectively indicated a higher scale of Pruzansky-Kaban classification (type IIA). These quantitative distinctions are expected to enhance the diagnostic reliability of CFM.

Nanomedicine and Early Cancer Diagnosis: Molecular Imaging using Fluorescence Nanoparticles.

Incorporating nanotechnology into fluorescent imaging and magnetic resonance imaging (MRI) has shown promising potential for accurate diagnosis of cancer at an earlier stage than the conventional imaging modalities. Molecular imaging (MI) aims to quantitatively characterize, visualize, and measure the biological processes or living cells at molecular and genetic levels. MI modalities have been exploited in different applications including noninvasive determination and visualization of diseased tissues, cell trafficking visualization, early detection, treatment response monitoring, and in vivo visualization of living cells. High-affinity molecular probe and imaging modality to detect the probe are the two main requirements of MI. Recent advances in nanotechnology and allied modalities have facilitated the use of nanoparticles (NPs) as MI probes. Within the extensive group of NPs, fluorescent NPs play a prominent role in optical molecular imaging. The fluorescent NPs used in molecular and cellular imaging can be categorized into three main groups including quantum dots (QDs), upconversion, and dyedoped NPs. Fluorescent NPs have great potential in targeted theranostics including cancer imaging, immunoassay- based cells, proteins and bacteria detections, imaging-guided surgery, and therapy. Fluorescent NPs have shown promising potentials for drug and gene delivery, detection of the chromosomal abnormalities, labeling of DNA, and visualizing DNA replication dynamics. Multifunctional NPs have been successfully used in a single theranostic modality integrating diagnosis and therapy. The unique characteristics of multifunctional NPs make them potential theranostic agents that can be utilized concurrently for diagnosis and therapy. This review provides the state of the art of the applications of nanotechnologies in early cancer diagnosis focusing on fluorescent NPs, their synthesis methods, and perspectives in clinical theranostics.

Three-dimensional characterization of mandibular asymmetry in craniofacial microsomia.

OBJECTIVES: This study aimed to investigate the three-dimensional (3D) mandibular asymmetry in craniofacial microsomia (CFM) and its association with the Pruzansky-Kaban classification system. MATERIALS AND METHODS: Cone-beam computed tomography images of 48 adult CFM cases were collected. The asymmetry of the mandibular body and ramus was analyzed with 3D landmarks. The mirrored mandibular model was registered on the original model, yielding a color-coded distance map and an average distance (i.e., asymmetry score) to quantify the overall mandibular asymmetry. RESULTS: The lengths of the mandibular body and ramus were significantly shorter on the affected than the contralateral side (p < 0.001). The ANB (p = 0.009), body and ramal lengths (both p < 0.001), and body and ramal length asymmetry (both p < 0.05) were significantly different between mild (types I/IIA) and severe (types IIB/III) cases. The mandibular asymmetry score correlated with mandibular body length asymmetry (r = 0.296, p = 0.046). CFM mandibles showed high variability in shape asymmetry. CONCLUSIONS: CFM patients showed distinct body and ramal length asymmetries. In severe cases, mandibles were smaller, more retruded, and more asymmetric in length. The mandibular shape asymmetry was highly variable regardless of the Pruzansky-Kaban types, being a determinant in the extent of overall mandibular asymmetry. CLINICAL RELEVANCE: The 3D morphologic analysis provides better insights into real mandibular asymmetry. Although the Pruzansky-Kaban classification was applied, high individual variability of the mandibular morphology still existed within the types. Therefore, individualized analyses and treatment plans for CFM patients are highly recommended.

Partitioned Extracts of Bauhinia championii Induce G0/G1 Phase Arrest and Apoptosis in Human Colon Cancer Cells.

Bauhinia championii (Benth.) is one of the commonly used herbs in Taiwan. The stem of this plant has been used to treat epigastria pain and rheumatoid arthritis. However, the antitumor activities of this herb have never been reported. This study aims to investigate the mechanism of anticancer activity of the extracts from B. championii (BC). BC was fractionated with a series of organic solvents, including n-hexane (H), ethyl acetate (EA), 1-butanol (B), and water (W). We first investigated the effects of BC-H, BC-EA, BC-B and BC-W partitioned fraction on cell viability. In HCT 116 colon cancer cell lines, BC-EA showed the highest inhibition of cell viability and changed the morphology of cells. With dose- and time-dependent manners, BC-EA inhibited the proliferation of HCT 116 cells by inducing apoptosis and G0/G1 phase arrest of cell cycle. To determine the underlying mechanisms, down-regulated CDK2, Cyclin D, and Cyclin E and up-regulated p16, p21, and p53 may account for the cell cycle arrest, while the apoptotic effect of BC-EA may attribute to increased intracellular Ca2+, loss of mitochondria membrane potential (ΔΨm), increase of Bax, Bak, puma, and AIF, and decrease of Bcl-2. Furthermore, the inactivation of Ras signaling pathway by BC-EA also contributed to its apoptotic effect on HCT 116. Our study demonstrates that BC-EA not only inhibits cell growth but also induces apoptosis through inhibiting Ras signal pathway and increasing p53 expression levels. We suggest that BC-EA may be a new dietary supplement and a useful tool to search for therapeutic candidates against colon cancer.

Perspectives of Decision-Making for Corneal Donation: A Qualitative Research Among Cancer Patients.

This study investigates the subjective experiences of terminal cancer patients who expedite their corneal donation decisions. The percentage of cancer patients who donate their corneas postmortem is low in Taiwan. The reasons are complex and needs further exploration. A qualitative design using content analysis was used. A semistructured interview approach was adopted to interview cancer patients recruited from a cancer ward in northern Taiwan. The study findings show that the factors contributing to an aversive preference of cancer patients included the necessity to consider the emotions of family members, traditional perceptions, religious reasons, disease, and no reason at all. Most cancer patients maintain a negative stance toward corneal donation. The results obtained in the present study can be used as a reference for future in-service education and promotional efforts regarding corneal donation. Discussing cornea donation needs to become a routine end-of-life care discussion.

Surgical-orthodontic treatment for class II asymmetry: outcome and influencing factors.

The study aimed to evaluate the treatment outcome of bimaxillary surgery for class II asymmetry and find the influencing factors for residual asymmetry. Cone-beam computed tomographic images of 30 adults who had bimaxillary surgery were acquired, and midline and contour landmarks of soft tissue and teeth were identified to assess treatment changes and outcome of facial asymmetry. The postoperative positional asymmetry of each osteotomy segment was also measured. After surgery, the facial midline asymmetry of the mandible, chin, and lower incisors improved significantly (all p < 0.01). However, the residual chin deviation remained as high as 2.64 ± 1.80 mm, and the influencing factors were residual shift asymmetry of the mandible (p < 0.001), chin (p < 0.001), and ramus (p = 0.001). The facial contour asymmetry was not significantly improved after surgery, and the influencing factors were the initial contour asymmetry (p < 0.001), and the residual ramus roll (p < 0.001) or yaw (p < 0.01) asymmetry. The results showed that bimaxillary surgery significantly improved midline but not contour symmetry. The postoperative midline and contour asymmetry was mainly affected by the residual shift and rotational jaw asymmetry respectively.

The sodium-glucose co-transporter 2 inhibitor empagliflozin attenuates cardiac fibrosis and improves ventricular hemodynamics in hypertensive heart failure rats.

BACKGROUND: Sodium glucose co-transporter 2 inhibitor (SGLT2i), a new class of anti-diabetic drugs acting on inhibiting glucose resorption by kidneys, is shown beneficial in reduction of heart failure hospitalization and cardiovascular mortality. The mechanisms remain unclear. We hypothesized that SGLT2i, empagliflozin can improve cardiac hemodynamics in non-diabetic hypertensive heart failure. METHODS AND RESULTS: The hypertensive heart failure model had been created by feeding spontaneous hypertensive rats (SHR) with high fat diet for 32 weeks (total n = 13). Half SHRs were randomized to be administered with SGLT2i, empagliflozin at 20 mg/kg/day for 12 weeks. After evaluation of electrocardiography and echocardiography, invasive hemodynamic study was performed and followed by blood sample collection and tissue analyses. Empagliflozin exhibited cardiac (improved atrial and ventricular remodeling) and renal protection, while plasma glucose level was not affected. Empagliflozin normalized both end-systolic and end-diastolic volume in SHR, in parallel with parameters in echocardiographic evaluation. Empagliflozin also normalized systolic dysfunction, in terms of the reduced maximal velocity of pressure incline and the slope of end-systolic pressure volume relationship in SHR. In histological analysis, empagliflozin significantly attenuated cardiac fibrosis in both atrial and ventricular tissues. The upregulation of atrial and ventricular expression of PPARα, ACADM, natriuretic peptides (NPPA and NPPB), and TNF-α in SHR, was all restored by treatment of empagliflozin. CONCLUSIONS: Empagliflozin improves hemodynamics in our hypertensive heart failure rat model, associated with renal protection, attenuated cardiac fibrosis, and normalization of HF genes. Our results contribute some understanding of the pleiotropic effects of empagliflozin on improving heart function.

Treatment outcome of bimaxillary surgery for asymmetric skeletal class II deformity.

OBJECTIVES: Facial asymmetry is one of the main concerns in patients with a dentofacial deformity. The aims of the study were to (1) evaluate the changes in facial asymmetry after bimaxillary surgery for asymmetric skeletal class II deformity and (2) compare preoperative and postoperative facial asymmetry of class II patients with normal controls. MATERIALS AND METHODS: The facial asymmetry was assessed for 30 adults (21 women and 9 men, mean age: 29.3 years) who consecutively underwent bimaxillary surgery for asymmetric skeletal class II deformity using cone-beam computed tomography before and at least 6 months after surgery. Thirty soft tissue and two dental landmarks were identified on each three-dimensional facial image, and the asymmetry index of each landmark was calculated. Results were compared with those of 30 normal control subjects (21 women and 9 men, mean age: 26.2 years) with skeletal class I structure. RESULTS: Six months after surgery, the asymmetric index of the lower face and total face decreased significantly (17.8 ± 29.4 and 16.6 ± 29.5 mm, respectively, both p < 0.01), whereas the asymmetric index of the middle face increased significantly (1.2 ± 2.2 mm, p < 0.01). Postoperatively, 53% of the class II patients had residual chin asymmetry. The postoperative total face asymmetric index was positively correlated with the preoperative asymmetric index (r = 0.37, p < 0.05). CONCLUSIONS: Bimaxillary surgery for patients with asymmetric class II deformity resulted in a significant improvement in lower face asymmetry. However, approximately 50% of the patients still had residual chin asymmetry. The total face postoperative asymmetry was moderately related to the initial severity of asymmetry. CLINICAL RELEVANCE: These findings could help clinicians better understand orthognathic outcomes on different facial regions for patients with asymmetric class II deformity.

Long-term outcomes of bimaxillary surgery for treatment of asymmetric skeletal class III deformity using surgery-first approach.

OBJECTIVES: Although several studies have reported the advantages of the surgery-first approach for orthognathic correction of Class III deformity, there are few reports of the success of this approach for patients with facial asymmetry. Therefore, the purpose of this study was to evaluate the outcome of bimaxillary surgery for asymmetric skeletal Class III deformity using a surgery-first approach. MATERIALS AND METHODS: Sixty-five patients who consecutively underwent at least a combined Le Fort I and a bilateral sagittal split osteotomy for asymmetric skeletal Class III deformity were identified in the authors' patient database. Standardized frontal photographs were used to measure the change in midface, intercommissural line, chin from midface, and chin deviation angles as well as upper, middle, and lower contour deviation angles. The facial midline symmetry index, facial contour symmetry index, and overall facial symmetry index were also calculated. Self-reported questionnaires regarding overall appearance and satisfaction with facial areas were administered at least 1 year post-surgery. RESULTS: Forty-six patients had genioplasty. There was a statistically significant improvement in the deviation angles measured and the facial midline, facial contour, and overall facial symmetry index. Self-reported questionnaires, completed at least 1 year post-surgery, showed that patient satisfaction was high. CONCLUSIONS: These findings demonstrate that the surgical-orthodontic treatment with surgery-first approach can successfully maintain or improve facial symmetry. CLINICAL RELEVANCE: The surgery-first approach for improving facial asymmetry using the guidelines described for setups of the models is a feasible alternative to the classic orthodontic-first approach for bimaxillary orthognathic surgery.

Repair of rabbit cartilage defect based on the fusion of rabbit bone marrow stromal cells and Nano-HA/PLLA composite material.

Objective To assess the effect of the fusion of rabbit bone marrow stromal cells (rBMSCs) and Nano-hydroxyapatite/poly (l-lactic acid) (Nano-HA/PLLA) in repairing the rabbit knee joint with full-thickness cartilage defect. Method The rBMSCs were isolated and cultured in vitro, and the third generation of rBMSCs was co-cultured with the Nano-HA/PLLA to construct the tissue-engineered cartilage (TEC). Eighteen New Zealand white rabbits were selected and randomly divided into three groups, namely, TEC group, Nano-HA/PLLA group, and control group. A cartilage defect model with the diameter of 4.5 mm and depth of 5 mm was constructed on the articular surface of medial malleolus of rabbit femur. General observation, histological observation, and Wakitani's histological scoring were conducted in the 12th and 24th week postoperatively. Results The results of TEC group indicated that new cartilage tissue was formed on the defect site and subchondral bone achieved physiological integration basically. Histological and immunohistochemical analyses indicated the generation of massive extracellular matrix. In contrast, limited regeneration and reconstruction of cartilage was achieved in the Nano-HA/PLLA group and control group, with a significant difference from the TEC group (p < 0.05). Moreover, the effect of cartilage repair was positively correlated with time. Conclusion The porous Nano-HA/PLLA combined with BMSCs promoted the repair of weight-bearing bone of adult rabbit's knee joint with cartilage defect.

A modified nasoalveolar molding technique for correction of unilateral cleft nose deformity.

INTRODUCTION: Traditional Figueroa nasoalveolar molding (NAM) requires weekly or biweekly adjustments to remove acrylic from the palatal plate to narrow the alveolar gap. These frequent adjustments create a burden for patients living far from a hospital. To minimize this burden, we developed a modified NAM technique using simplified lip taping and a passive palatal plate. Herein we present our clinical experience and outcomes using the traditional and modified methods. MATERIAL AND METHODS: In this blinded, retrospective study of 66 patients with complete unilateral cleft lip and palate, 33 received the traditional NAM and 33 received the modified NAM. Pretreatment and posttreatment facial photographs and clinical charts were used to compare efficacy (nostril height ratio, nostril width ratio, columellar angle, nasal base angle), efficiency (molding frequency), incidence of complications (facial irritation, mucosal ulceration), and medical cost. RESULTS: Traditional and modified NAM did not differ in treatment efficacy for nostril height ratio (0.88 ± 0.14 vs. 0.90 ± 0.12), nostril width ratio (2.22 ± 0.39 vs. 2.38 ± 0.50), columellar angle (73.5 ± 9.1 degrees vs. 71.3 ± 11.8 degrees), nasal base angle (5.1 ± 2.4 degrees vs. 5.9 ± 2.7 degrees), or alveolar gap width (2.0 ± 2.0 mm vs. 2.0 ± 1.7 mm) (all p > 0.05). Traditional NAM was less efficient, i.e., required more adjustments (8.6 ± 2.0 vs. 6.7 ± 1.1), and cost more (22016.4 ± 2012.7 New Taiwan dollars vs. 20137.6 ± 1173.4 New Taiwan dollars) (both p < 0.001). CONCLUSIONS: Both NAM techniques similarly improved nasal deformities and reduced alveolar gaps, but the modified technique was more efficient and cost less in terms of insurance reimbursement and supplies (labial tapes).