Investigating functional mechanisms in the Co-biodegradation of lignite and guar gum under the influence of salinity.

The biodegradation of guar gum by microorganisms sourced from coalbeds can result in low-temperature gel breaking, thereby reducing reservoir damage. However, limited attention has been given to the influence of salinity on the synergistic biodegradation of coal and guar gum. In this study, biodegradation experiments of guar gum and lignite were conducted under varying salinity conditions. The primary objective was to investigate the controlling effects and mechanisms of salinity on the synergistic biodegradation of lignite and guar gum. The findings revealed that salinity had an inhibitory effect on the biomethane production from the co-degradation of lignite and guar gum. The biomethane production declined with increasing salinity levels, decreasing from 120.9 mL to 47.3 mL. Even under 20 g/L salt stress conditions, bacteria in coalbeds could effectively break the gel and the viscosity decreased to levels below 5 mPa s. As salinity increased, the removal rate of soluble chemical oxygen demand (SCOD) decreased from 55.63% to 31.17%, and volatile fatty acids (VFAs) accumulated in the digestion system. High salt environment reduces the intensity of each fluorescence peak. Alterations in salinity led to changes in microbial community structure and diversity. Under salt stress, there was an increased relative abundance of Proteiniphilum and Methanobacterium, ensuring the continuity of anaerobic digestion. Hydrogentrophic methanogens exhibited higher salt tolerance compared to acetoclastic methanogens. These findings provide experimental evidence supporting the use of guar gum fracturing fluid in coalbeds with varying salinity levels.

Decreased Nrf2 protein level and low sperm quality in intractable spermatocystitis.

ABSTRACT: To investigate the molecular etiology of low sperm quality in patients with intractable spermatocystitis, spermatozoa samples from patients with persistent hematospermia undergoing transurethral seminal vesiculoscopy and healthy volunteers were utilized. Spermatozoa samples were collected from the seminal vesicles through transurethral seminal vesiculoscopy or by masturbation ejaculation. Sperm quality was analyzed by a WLJY-9000 color semen analysis system. Measurement of tumor necrosis factor alpha (TNFα) and interleukin-6 (IL-6) in the seminal plasma was performed using enzyme-linked immunosorbent assay (ELISA). Measurement of H2O2 in the seminal plasma was performed with a hydrogen peroxide kit. The protein levels of nuclear factor erythroid 2-related factor 2 (Nrf2) and phosphorylated-Nrf2 (p-Nrf2) were measured by western blot analysis and immunofluorescence assays. Low sperm quality parameters and increased levels of inflammatory cytokines (TNFα, IL-6, and H2O2) in the seminal plasma were detected among the semen samples from the patients with persistent hematospermia. Nrf2 and p-Nrf2 were strongly expressed in the nucleus and periphery of human sperm cells, according to the results of the immunofluorescence assays. The protein levels of Nrf2 and p-Nrf2 were significantly lower in the spermatozoa samples from patients with persistent hematospermia than in those from healthy volunteers with normal sperm motility. The results suggested that Nrf2 signaling might play a role in the low sperm quality of patients with intractable spermatocystitis.

Inhibition of signal peptidase complex expression affects the development and survival of Schistosoma japonicum.

Background: Schistosomiasis, the second most neglected tropical disease defined by the WHO, is a significant zoonotic parasitic disease infecting approximately 250 million people globally. This debilitating disease has seriously threatened public health, while only one drug, praziquantel, is used to control it. Because of this, it highlights the significance of identifying more satisfactory target genes for drug development. Protein translocation into the endoplasmic reticulum (ER) is vital to the subsequent localization of secretory and transmembrane proteins. The signal peptidase complex (SPC) is an essential component of the translocation machinery and functions to cleave the signal peptide sequence (SP) of secretory and membrane proteins entering the ER. Inhibiting the expression of SPC can lead to the abolishment or weaker cleavage of the signal peptide, and the accumulation of uncleaved protein in the ER would affect the survival of organisms. Despite the evident importance of SPC, in vivo studies exploring its function have yet to be reported in S. japonicum. Methods: The S. japonicum SPC consists of four proteins: SPC12, SPC18, SPC22 and SPC25. RNA interference was used to investigate the impact of SPC components on schistosome growth and development in vivo. qPCR and in situ hybridization were applied to localize the SPC25 expression. Mayer's carmalum and Fast Blue B staining were used to observe morphological changes in the reproductive organs of dsRNA-treated worms. The effect of inhibitor treatment on the worm's viability and pairing was also examined in vitro. Results: Our results showed that RNAi-SPC delayed the worm's normal development and was even lethal for schistosomula in vivo. Among them, the expression of SPC25 was significantly higher in the developmental stages of the reproductive organs in schistosomes. Moreover, SPC25 possessed high expression in the worm tegument, testes of male worms and the ovaries and vitellarium of female worms. The SPC25 knockdown led to the degeneration of reproductive organs, such as the ovaries and vitellarium of female worms. The SPC25 exhaustion also reduced egg production while reducing the pathological damage of the eggs to the host. Additionally, the SPC-related inhibitor AEBSF or suppressing the expression of SPC25 also impacted cultured worms' pairing and viability in vitro. Conclusions: These data demonstrate that SPC is necessary to maintain the development and reproduction of S. japonicum. This research provides a promising anti-schistosomiasis drug target and discovers a new perspective on preventing worm fecundity and maturation.

Application of 3 dimension-printed injection-molded polyether ether ketone lunate prosthesis in the treatment of stage III Kienböck's disease: A case report.

BACKGROUND: Polyether ether ketone (PEEK) is a high-performance medical polymer, and there are some clinical cases of PEEK prosthesis implantation. However, application of 3D-printed injection-molded PEEK lunate prosthesis for treatment of stage III Kienböck's disease has not been reported. This study's purpose was to analyze the clinical efficacy of 3D-printed injection-molded PEEK lunate prosthesis in the treatment of stage III Kienböck's disease and thus provide a good therapeutic choice for Kienböck's disease. CASE SUMMARY: We report a patient with stage III Kienböck's disease. With the healthy lunate bone as reference, 3D lunate reconstruction was performed using a mirroring technique. A PEEK lunate prosthesis was prepared by 3D printing and injection molding, and then it was inserted into the original anatomical position after removing the necrotic lunate bone. Wrist pain and function, anatomical suitability of the lunate prosthesis, and complications were evaluated and analyzed postoperatively. At the last visit (one year after surgery), the range of motion, grasp force, visual analog scale score and Cooney score of the affected wrist were significantly improved, and postoperative X-ray examination indicated that the lunate prosthesis had good anatomical suitability for adjacent bony structures. CONCLUSION: The 3D-printed injection-molded PEEK lunate prosthesis demonstrated definite efficacy in treating stage III Kienböck's disease.

Evaluation on production trend, compositions, and impact of plastic waste in Chengdu, southwestern China.

Based on statistical data from 2005 to 2019, we used the back propagation (BP) neural network model to predict the production amount of plastic waste in Chengdu. In addition to the amount of waste produced we wanted to achieve an understanding of its composition and environmental impacts. Compositions of plastic waste were analyzed by sampling. Particulate matter in the air and greenhouse gas emissions (GHGs) from plastic waste incineration, bisphenol A (BPA) from plastic waste landfills, were also evaluated. Results indicated that (a) economic development, urban construction level, and residents' consumption were pusitively correlated to different degrees to plastic waste production; (b) the production of plastic waste in Chengdu in 2025 and 2030 will reach 865.3 and 931 kilotons (Kt), respectively; (c) high density polyethylene (HDPE) and polypropylene (PP) are the two main components of plastic waste in Chengdu and accounted for 40.17% and 24.96%, respectively; (d) different degrees of environmental impacts occurred during plastic waste incineration and landfill (taking 2019 as an example, the incineration of plastic waste in Chengdu produced between 2874.82 and 4711.73 tons of inhalable particulate matter (PM) and emitted between 725.4 and 867.4 Kt of CO2, and between 65.02 and 910.27 kg of bisphenol A (BPA) leached from sanitary landfills); (e) positive policies and measures from the beginning to the end-of-life of plastics should be carried out in the future, which would improve the level of plastic waste management in Chengdu and mitigate the side-impacts from plastic waste treatment and disposal.Implications: The implications of this article are Generation trends of plastic waste were revealed by a BP neural network model, which provided essential data for authorities to make decisions on waste management.Influencing factors affecting plastic waste generation were analyzed, which will strongly support policy considerations regarding plastic waste control.This investigation first explored and reported the compositions of plastic waste mixed with municipal solid waste (MSW), which yielded valuable information concerning plastic waste and details concerning the impacts of plastic waste disposal processes.Those results of this investigation, being published here for the first time, will guide plastic waste management in Chengdu and could also provide useful information to other cities regarding that issue.

Association of TNFSF4 Gene Polymorphisms and Plasma TNFSF4 Level with Risk of Systemic Lupus Erythematosus in a Chinese Population.

BACKGROUND: Systemic lupus erythematosus (SLE) is an autoimmune disease. Tumor necrosis factor ligand superfamily member 4 (TNFSF4) is an inflammatory factor that has been discussed in different inflammatory diseases and cancers. However, relationship between TNFSF4 and SLE is limited. MATERIAL AND METHODS: The present case-control study recruited 400 SLE patients and 600 healthy controls from Southern Chinese Han origin. Plasma levels of TNFSF4 were tested by enzyme linked-immunosorbent assay, and association of rs2205960, rs704840, rs844648, rs3850641 and rs17568 polymorphisms in TNFSF4 gene with SLE risk was evaluated by TaqMan assay according to genotyping. RESULTS: Plasma levels of TNFSF4 were significantly higher in SLE patients than that in healthy controls (390.87 (189.10-906.01) versus 132. 70 (81.27-195.58) pg/ml, P < 0.001). Increased levels of TNFSF4 were positively related to SLE disease activity score, optic nerve injury, leukopenia, and hypocompleminemia. Genotype TT+TG, allele T of rs2205960, genotype GG+GT of rs704840, genotype AA of rs844648 and rs17568 were significantly related to SLE risk (all P < 0.05). Moreover, polymorphism rs844648 was related to SLE patients with clinical feature rash either for genotype AA or allele A. CONCLUSION: TNFSF4 was elevated in SLE patients and may associate with SLE susceptibility in Southern Chinese Han population.

High-efficiency removal of lead/cadmium from wastewater by MgO modified biochar derived from crofton weed.

The adsorption performance and mechanisms of Pb2+ and Cd2+ in wastewater using MgO modified biochar derived from crofton weed (MBCW600) are investigated. The Pb2+ and Cd2+ adsorption capacities of MBCW600 by the Hill model reach 384.08 mg/g and 207.02 mg/g, respectively, which is larger than that of original biochar. Pb2+ could be more easily captured by MBCW600 compared to Cd2+ in the multimetal system. Mg2+ contributes to Pb2+ and Cd2+ adsorption among coexisting cations. The exhausted MBCW600 could be well regenerated by simple method after use. The adsorption mechanism study indicates that Pb2+ and Cd2+ removal are primary contributed to mineral precipitation and ion exchange. The effective treatment volumes of Pb2+ and Cd2+ wastewater achieve 3050 mL and 2150 mL in the fixed-bed column experiment, respectively. Therefore, MBCW600 presents remarkable adsorption capability, excellent recoverability and large throughput, which shows the potential application in future treatment of wastewater containing heavy metal.

Carotid intima-media thickness in patients with hyperuricemia: a systematic review and meta-analysis.

OBJECTIVE: Despite the high incidence and mortality of cardiovascular events in hyperuricemia patients, the role of serum uric acid in cardiovascular diseases is still controversial. The aim of this meta-analysis was to explore the difference of carotid intima-media thickness in hyperuricemia and control groups. METHODS: We performed this meta-analysis by searching the PubMed, Cochrane Library, Embase and Web of Science databases up to July 2020. The 95% confidence intervals and standard mean differences were calculated to analyze the differences in carotid intima-media thickness in hyperuricemia groups and control groups. Sensitivity analysis, subgroup analysis and meta-regression were used to explore the sources of heterogeneity. Publication bias was evaluated by funnel plot and Begg's regression test. We used Stata 14.0 software to complete our analyses. RESULTS: A total of 8 articles were included. The results showed that there was a significant increase in carotid intima-media thickness in the hyperuricemia groups compared with the control groups [SMD = 0.264, 95% CI (0.161-0.366), P < 0.001]. Subgroup analyses showed that age, sample size, blood pressure and body mass index were not the source of heterogeneity. Meta-regression enrolled the method of CIMT measurement, location, age, smoking and diabetes mellitus as categorical variables, but none of these factors was found to be significant in the model. The Begg's test value (P = 0.174) was greater than 0.05, indicating there was no publication bias. CONCLUSION: The results showed that carotid intima-media thickness was increased in hyperuricemia patients compared with controls, which indicated that hyperuricemia patients may have a higher risk of cardiovascular diseases.

Modulation on tetrodotoxin-resistant sodium current of loureirin B in rat dorsal root ganglion neurons via cyclic AMP-dependent protein kinase A.

To search the modulation mechanism of loureirin B, a flavonoid is extracted from Dracaena cochinchinensis, on tetrodotoxin-resistant (TTX-R) sodium channel in dorsal root ganglion (DRG) neurons of rats. Experiments were carried out based on patch-clamp technique and molecular biological methods. We observed the time-dependent inhibition of loureirin B on TTX-R sodium currents in DRG neurons and found that neither occupancy theory nor rate theory could well explain the time-dependent inhibitory effect of loureirin B on TTX-R sodium currents. It suggested that a second messenger-mediated signaling pathway may be involved in the modulation mechanism. So the cyclin AMP (cAMP) level of the DRG neurons before and after incubation with loureirin B was tested by ELISA Kit. Results showed that loureirin B could increase the cAMP level and the increased cAMP was caused by the enhancement of adenylate cyclase (AC) induced by loureirin B. Immunolabelling experiments further confirmed that loureirin B can promote the production of PKA in DRG neurons. In the presence of the PKA inhibitor H-89, the inhibitory effect of loureirin B on TTX-R sodium currents was reversed. Forskolin, a tool in biochemistry to raise the levels of cAMP, also could reduce TTX-R sodium currents similar to that of loureirin B. These studies demonstrated that loureirin B can modulate the TTX-R sodium channel in DRG neurons via an AC/cAMP/PKA pathway involving the activation of AC and PKA, which also can be used to explain the other pharmacological effects of loureirin B.

Brucine inhibits TNF-α-induced HFLS-RA cell proliferation by activating the JNK signaling pathway.

Rheumatoid arthritis (RA) is a diffuse connective tissue disease. Brucine selectively inhibits cell immunity, immune hypersensitivity and induces apoptosis. The current study aimed to investigate effects of brucine on human fibroblast-like synoviocytes (HFLS) of RA and to clarify associated molecular mechanisms. HFLS-RA were treated with tumor necrosis factor (TNF)-α prior to treatment with brucine at carrying concentrations. Cell Counting Kit-8 assays were performed to evaluate HFLS-RA proliferation. Western blot assays were employed to examine c-Jun N-terminal kinase (JNK) expression and phosphorylation in TNF-α-induced HFLS-RA. An association between brucine treatment and JNK phosphorylation was assessed by employing a linear regression analysis. The results suggested that low doses of brucine (0.125 and 0.25 mg/ml) significantly reversed proliferation effects induced by TNF-α, however, final cell viabilities were increased compared with the untreated control (P>0.05 and P<0.05, respectively). High brucine doses (≥0.5 mg/ml) significantly reversed TNF-α-induced proliferation and further inhibited viability compared with the untreated control (P<0.05). Regarding JNK expression, there were no significant differences among the brucine treatment, and between the Control and the TNF-α groups (P>0.05). Brucine treatment significantly decreased JNK phosphorylation compared with the TNF-α group (P<0.05). JNK specific inhibitor, SP600125, significantly inhibited brucine-induced cell viability enhancement compared with the brucine-treated groups without inhibitor (P<0.05). A linear regression analysis suggested that brucine was associated with JNK phosphorylation in TNF-α-treated HFLS-RA. In conclusion, brucine significantly inhibited TNF-α-induced HFLS-RA proliferation by activating the JNK signaling pathway. Therefore, brucine may have potential clinical applications in the treatment of RA.

Analysis of the stress distribution of the subtalar joint and fusion efficacy after double-screw insertion.

BACKGROUND: Screw fixation is a typical technique for the isolated subtalar joint. However, no consensus has been reached on how to select the most suitable insertion position and direction. This study aims to find the ideal screw insertion and then explore its influence on the clinical efficacy of subtalar fusion by analyzing the effects of different cannulated screw insertions on the stress distribution, anti-rotary strength, and anti-inversion/eversion strength of the subtalar joint. METHODS: In this study, we investigated three cannulated screw insertions for subtalar fusion: screw insertion with the most uniform stress distribution (group A), lateral-medial parallel screw insertion (group B), and traditional longitudinally parallel screw insertion (group C). The effects of these three insertions on the loading stress of the subtalar joint (including stress distribution, anti-inversion/eversion strength, and anti-rotary strength) were comparatively analyzed with the three-dimensional finite element method to screen the ideal screw insertion. Moreover, a prospective study was conducted to analyze the influence of the ideal screw insertion on subtalar fusion, including the fusion rate, fusion time, and clinical efficacy (VAS score, AOFAS score, and complications). RESULTS: Group B was worse than group A with respect to the stress distribution uniformity, but slightly better than group C, and better than both groups A and C in terms of the anti-rotary strength and anti-inversion/eversion strength. The screw insertion based on the most uniform stress distribution is not feasible in surgery. Therefore, the lateral-medial antiparallel screw insertion is the ideal insertion. From January 2012 to June 2016, 48 cases were treated by subtalar fusion with the ideal screw insertion, and then followed up for 30.6 months (12-48 months). The fusion was proved in all 48 cases with a fusion rate of 100% by X-ray or CT scan. The mean time of fusion was 12.8 weeks (12-16 weeks). The VAS score decreased from 6.00 before operation to 1.03 on the last visit (P < 0.05), and the AOFAS score increased from 57.0 to 85.6 (P < 0.05), with a good and excellent rate of 95.8%. CONCLUSIONS: The lateral-medial parallel screw insertion not only demonstrates a good stress distribution profile of the subtalar joint but also has advantages such as easy localization and operation during surgery, as well as a high fusion rate and few complications after surgery. Therefore, it is a safe, accurate, and effective fixation mode that is worthy of being popularized clinically.

Initial stability and stress distribution of ankle arthroscopic arthrodesis with three kinds of 2-screw configuration fixation: a finite element analysis.

BACKGROUND: Arthroscopic ankle arthrodesis (AAA) is recognized as the standard treatment for the end-stage ankle arthritis. Two-screw configuration fixation is a typical technique for AAA; however, no consensus has been reached on how to select most suitable inserted position and direction. For better joint reduction, we developed a new configuration (2 home run-screw configuration: 2 screws are inserted from the lateral-posterior and medial-posterior malleolus into the talar neck) and investigated whether it turned out to be better than the other commonly used 2-screw configurations. METHODS: In this study, we investigated three kinds of 2-screw configurations: 2 "home run"-screw configuration (group A), crossed transverse configuration (the screw is inserted from the medial malleolus into the anterior talus and the other from the lateral tibia maintains posterior talus, group B), and 2 parallel screw configuration (2 parallel screws are inserted from the posteromedial side of the tibia into talus, group C). The effects of the above three insertions on the loading stress of the tibio-talar joint were comparatively analyzed with a three-dimensional finite element model. RESULTS: Group A was better than groups B and C in respect of stress distribution uniformity and superior to both groups B and C in anti-flexion strength and anti-internal rotation strength. Group A was slightly worse than group C but better than group B in anti-dorsiflexion and anti-valgus and varus strength. CONCLUSIONS: Two "home run"-screw configuration facilitates the reduction of anterior talus dislocation of end-stage ankle arthritis. Our finite element analysis demonstrates the configuration is superior to crossed transverse and parallel configuration for arthroscopic ankle arthrodesis in terms of stress distribution and initial stability.

Identification of differentially expressed proteins in the gastric mucosal atypical hyperplasia tissue microenvironment.

In the present study, the interaction of proteins in the microenvironment of gastric mucosal atypical hyperplasia was analyzed. The stromata of normal gastric mucosa (NGM) and gastric mucosal atypical hyperplasia (GMAH) tissues were purified with laser capture microdissection (LCM). The differentially expressed GMAH proteins of the NGM and GMAH tissues were identified by quantitative proteomic techniques with isotope labeling. The cross-talk between differentially expressed proteins in NGM and GMAH tissues was then analyzed by bioinformatics. There were 165 differentially expressed proteins identified from the stromata of NGM and GMAH tissues. Among them, 99 proteins were upregulated and 66 were downregulated in GMAH tissue. The present study demonstrated that these proteins in gastric mucosal atypical hyperplasia were involved in cancer-associated signaling pathways, including the p53, mitogen-activated protein kinase (MAPK), cell cycle and apoptosis signaling pathways, and were involved in cellular growth, cellular proliferation, apoptosis and the humoral immune response. The results of the present study suggest that the 165 differentially expressed proteins, including S100 calcium-binding protein A6 (S100A6) and superoxide dismutase 3 (SOD3) in the microenvironment of gastric mucosal atypical hyperplasia, are involved in the p53, MAPK, cell cycle and apoptosis signaling pathways, and serve a function in the pathogenesis of gastric cancer.

Comparison of activated carbon and iron/cerium modified activated carbon to remove methylene blue from wastewater.

The methylene blue (MB) removal abilities of raw activated carbon and iron/cerium modified raw activated carbon (Fe-Ce-AC) by adsorption were researched and compared. The characteristics of Fe-Ce-AC were examined by N2 adsorption, zeta potential measurement, FTIR, Raman, XRD, XPS, SEM and EDS. After modification, the following phenomena occurred: The BET surface area, average pore diameter and total pore volume decreased; the degree of graphitization also decreased. Moreover, the presence of Fe3O4 led to Fe-Ce-AC having magnetic properties, which makes it easy to separate from dye wastewater in an external magnetic field and subsequently recycle. In addition, the equilibrium isotherms and kinetics of MB adsorption on raw activated carbon and Fe-Ce-AC were systematically examined. The equilibrium adsorption data indicated that the adsorption behavior followed the Langmuir isotherm, and the pseudo-second-order model matched the kinetic data well. Compared with raw activated carbon, the maximum monolayer adsorption capacity of Fe-Ce-AC increased by 27.31%. According to the experimental results, Fe-Ce-AC can be used as an effective adsorbent for the removal of MB from dye wastewater.

Workplace violence against medical staff of Chinese children's hospitals: A cross-sectional study.

BACKGROUND: In China, medical staff of children's hospitals are commonly exposed to violence. However, few studies on medical violence are conducted in the settings of children's hospitals. The aim of this study is to assess the incidence, magnitude, consequences, and potential risk factors of workplace violence (WPV) against medical staff of children's hospitals. METHODS: A retrospective cross-sectional design was used. A self-administered questionnaire was utilized to collect data on 12 children's hospitals. The questionnaires were distributed to a stratified proportional random sample of 2,400 medical staff; 1,932 valid questionnaires were collected. A chi-square test and multiple logistic regression analysis were conducted. RESULTS: A total of 68.6% of respondents had experienced at least one WPV incident involving non-physical and/or physical violence in the past year. The perpetrators were mainly family members of patients (94.9%). Most of the WPV occurred during the day shift (70.7%) and in wards (41.8%). Males were 1.979 times (95% CI, 1.378 to 2.841) more likely than females to experience physical violence. Emergency departments were more exposed to physical violence than other departments. Oncology was 2.733 times (95% CI, 1.126 to 6.633) more exposed to non-physical violence than the emergency department. As a result of WPV, victims felt aggrieved and angry, work enthusiasm declined, and work efficiency was reduced. However, only 5.6% of the victims received psychological counseling. CONCLUSION: Medical staff are at high risk of violence in China's children's hospitals. Hospital administrators and related departments should pay attention to the consequences of these incidents. There is a need for preventive measures to protect medical staff and provide a safer workplace environment. Our results can provide reference information for intervention strategies and safety measures.

[Preparation of Magnetic Biomass Carbon by Thermal Decomposition of Siderite Driven by Wheat Straw and Its Adsorption on Cadmium].

C-Fe3O4 composite material [magnetic biomass char (MBC)] was prepared by pyrolysis of a mixture of wheat straw and siderite at 500℃. The MBC was characterized by XRF, FTIR, XRD, SEM, XPS, and a magnetic susceptibility device. The effect of contact time, pH value, initial Cd2+ concentration, and ionic strength on the adsorption capacity of the MBC to Cd2+ was investigated. The results showed that the BET surface areas of the MBC and biomass char (BC) were 23.38 m2·g-1 and 7.20 m2·g-1, respectively, total pore volumes were 1.04×10-1 cm3·g-1 and 2.23×10-2 cm3·g-1, and average pore diameters were 17.74 nm and 12.38 nm. The magnetic susceptibility of the MBC was 42900×10-8 m3·kg-1. FTIR showed that phenolic hydroxyl and carboxyl functional groups bound metal ions on the surface of the MBC and BC. The kinetic data of the MBC were described well by the pseudo-second-order model. Isothermal adsorption of Cd2+ by MBC and BC was fitted well by the Freundlich equation. The adsorption velocity increased with an increase of pH in the region 3-6 and then stabilized in the region 6-9. The adsorption capacity of Cd2+ decreased slightly when ionic strength increased from 1 mmol·L-1 to 100 mmol·L-1, whereas the desorption rate increased from 0.51% to 8.5%. The adsorption properties and characterization results illustrated that the removal mechanism of Cd2+ likely was through adsorption and ion exchange on the surface of the MBC with a high amount of functional groups. In addition, magnetic adsorbents offered a significant advantage compared to other adsorbents in the aspect of separation from aqueous solution.

Thermal ablation in cancer.

Radiofrequency ablation (RFA) and cryoablation are alternative forms of therapy used widely in various pathological states, including treatment of carcinogenesis. The reason is that ablation techniques have ability of modulating the immune system. Furthermore, recent studies have applied this form of therapy on tumor microenvironment and in the systematic circulation. Moreover, RFA and cryoablation result in an inflammatory immune response along with tissue disruption. Evidence has demonstrated that these procedures affect carcinogenesis by causing a significant local inflammatory response leading to an immunogenic gene signature. The present review enlightens the current view of these techniques in cancer.

Tibiotalocalcaneal arthrodesis with headless compression screws.

BACKGROUND: Tibiotalocalcaneal arthrodesis with headless compression screws has not been previously reported. We hypothesized that these screws could be suitable for tibiotalocalcaneal arthrodesis because of their special design. This study aimed to evaluate the clinical outcomes of patients undergoing tibiotalocalcaneal arthrodesis with headless compression screws for the treatment of severe arthropathy of the ankle and subtalar joint. METHODS: From 2010 to 2015, 23 patients with severe ankle and subtalar arthropathy underwent tibiotalocalcaneal arthrodesis. All surgeries were completed by a senior surgeon in the same hospital. These patients were 18~76 years (mean 54.6 years) old; the duration of their disease was 9~38 months (mean 13.2 months). The study population included 12 males and 11 females; 12 patients underwent surgery on the left and 11 on the right. Indications for surgery included avascular necrosis of the talus (n = 14), severe posttraumatic arthritis (n = 4), osteoarthritis (n = 2), terminal tuberculous arthritis (n = 1), rheumatoid arthritis (n = 1) and Charcot neuroarthropathy (n = 1). A lateral oblique incision was performed to expose the subtalar joint, and an anteromedial longitudinal incision was used to expose the ankle joint. After the articular surfaces were removed, the tibia, talus and calcaneus were carefully aligned and fixed with two headless compression screws. Patients were followed up at 6 weeks and 3, 6 and 9 months after surgery; they were evaluated by Roles and Maudsley patient satisfaction scores, the American Orthopaedic Foot & Ankle Society (AOFAS) Ankle-Hindfoot Score, visual analogue scale (VAS) score and radiographic evaluation. RESULTS: Seventeen patients were studied, with a mean follow-up time of 6.5 months (range 5-24). The mean Roles and Maudsley patient satisfaction score was 1.41 at the last follow-up; most of the patients were satisfied with the surgery results. The mean preoperative AOFAS Ankle-Hindfoot Score was 29.6 (range 18-37), while the mean last follow-up AOFAS Ankle-Hindfoot Score was 68.5 (range 61-80). The VAS score for preoperative functional pain was 6.95 (range 3-10) compared to 1.56 (range 0-3) postoperatively (P < 0.001). The mean surgical duration was 57 (range 42-125) min. The mean time to union was 3.8 months (range 3-12 months); fusion of the ankle and subtalar joint was successful in all patients. One patient experienced delayed wound healing. CONCLUSIONS: Tibiotalocalcaneal arthrodesis with headless compression screws for the treatment of severe arthropathy of the ankle and subtalar joint is an effective treatment that is minimally invasive and is associated with a short operation time, high fusion rate, low incidence of complications and good postoperative recovery.

The dual induction of apoptosis and autophagy by SZC014, a synthetic oleanolic acid derivative, in gastric cancer cells via NF-κB pathway.

Oleanolic acid (OA) possesses various pharmacological activities, such as antitumor and anti-inflammation; however, its clinical applications are limited by its relatively weak activities and low bioavailability. In this study, we evaluated the cytotoxic activity of seven novel OA derivatives, one of which, SZC014 [2-(pyrrolidine-1-yl) methyl-3-oxo-olean-12-en-28-oic acid], exhibited the strongest antitumor activity; its anticancer effect on gastric cancer cells and action mechanisms were investigated. The viability of OA and seven synthesized derivatives treating gastric cancer cells was detected using tetrazolium (MTT). Among them, SZC014 exhibited the strongest cytotoxic activity against gastric cancer cells (SGC7901, MGC803, and MKN-45). The effect of SZC014 on cell cycle was identified by propidium iodide (PI) staining assay. The cellular apoptosis induced by SZC014 was tested by annexin V/PI. The cellular morphological changes and ultrastructural structures affected by SZC014 were observed and imaged through inverted phase contrast microscope and transmission electron microscopy. Western blotting was performed to explore the expression of proteins associated with apoptosis (caspase 3, caspase 9, Bax, Bcl-2, and Bcl-xL), autophagy (Beclin 1 and ATG 5), and nuclear factor-κB (NF-κB) signal pathway, respectively. The cytotoxic activities of all the seven synthesized OA derivatives were stronger than that of OA against gastric cancer cells. SZC014 exhibited stronger cytotoxic activity than other OA derivatives, inhibited the proliferation of gastric cancer cells, besides, induced G2/M phase cell cycle arrest in SGC7901 cells. Both apoptosis and autophagy were found simultaneously in SZC014-treated SGC7901 cells. Caspase-dependent apoptosis induced by SZC014 was confirmed to be associated with upregulation of Bax and downregulation of Bcl-2 and Bcl-xL, while upregulation of Beclin 1 and ATG 5 was inferred to be involved in SZC014-induced autophagy. Moreover, treating cells with SZC014 resulted in a decrease in phosphorylation of IκBα and NF-κB/p65 and NF-κB/p65 nuclear translocation. The cytotoxic activities of seven OA derivatives were generally stronger than that of OA, among which, SZC014 possessed the most potent anticancer activity in SGC7901 cells and would be a promising chemotherapic agent for the treatment of gastric cancer.

Three-Dimensional Printed Prosthesis for Repair of Superior Canal Dehiscence.

Outcomes following repair of superior canal dehiscence (SCD) are variable, and surgery carries a risk of persistent or recurrent SCD symptoms, as well as a risk of hearing loss and vestibulopathy. Poor outcomes may occur from inadequate repair of the SCD or mechanical insult to the membranous labyrinth. Repair of SCD using a customized, fixed-length prosthesis may address current operative limitations and improve surgical outcomes. We aim to 3-dimensionally print customized prostheses to resurface or occlude bony SCD defects. Dehiscences were created along the arcuate eminence of superior semicircular canals in cadaveric temporal bones. Prostheses were designed and created using computed tomography and a 3-dimensional printer. The prostheses occupied the superior semicircular canal defect, reflected in postrepair computed tomography scans. This novel approach to SCD repair could have advantages over current techniques. Refinement of prosthesis design and materials will be important if this approach is translated into clinical use.