Evaluating effectiveness of cadaveric arthroscopic training for orthopaedic residents: A comparison of joints and training levels.

Purpose: This study aimed to evaluate the effects and interactions of training level and different joints on the outcomes of cadaveric arthroscopic training courses for orthopaedic residents. Methods: This prospective study enrolled 16 orthopaedic residents who voluntarily participated in a cadaveric training programme involving the shoulder, elbow, wrist, knee and ankle joints. Outcomes were quantitatively assessed using task-specific checklists and the Arthroscopic Surgery Skill Evaluation Tool. Two-way analysis of variance (ANOVA) was conducted to determine the significance of the interactions between joint and years of training. Results: Resident scores significantly increased after the dedicated lectures in all five joints (p = 0.003 for the shoulder module, p < 0.001 for the other joints). Two-way ANOVA revealed that the progress made after the dedicated lectures was significantly impacted by the joint (p = 0.006) and training level × joint interaction (p = 0.005) but not by the training level (p = 0.47). The simple effect of the joint was examined using Sidak's multiple comparison test. Among junior residents, the dedicated lectures resulted in more substantial progress in elbow and wrist arthroscopy when compared to shoulder arthroscopy (p = 0.020 and p = 0.043, respectively). Conclusions: The results suggest that, in cadaveric arthroscopic training courses for orthopaedic residents, training outcomes are primarily impacted by the specific joint being trained rather than the training level. Specifically, junior residents demonstrated greater improvement with training in procedures that are less commonly encountered during on-the-job training, such as elbow and wrist arthroscopy. Clinical Relevance: These findings suggest the need to prioritise wrist and elbow arthroscopic training for junior residents to optimise educational outcomes. Level of Evidence: Level III.

Mechanistic study of the Aldo-keto reductase family 1 member A1 in regulating mesenchymal stem cell fate decision toward adipogenesis and osteogenesis.

AIMS: Akr1A1 is a glycolytic enzyme catalyzing the reduction of aldehyde to alcohol. This study aims to delineate the role of Akr1A1 in regulating the adipo-osteogenic lineage differentiation of mesenchymal stem cells (MSCs). MAIN METHODS: MSCs derived from human bone marrow and Wharton Jelly together with gain- and loss-of-function analysis as well as supplementation with the S-Nitrosoglutathione reductase (GSNOR) inhibitor N6022 were used to study the function of Akr1A1 in controlling MSC lineage differentiation into osteoblasts and adipocytes. KEY FINDINGS: Akr1A1 expression, PKM2 activity, and lactate production were found to be decreased in osteoblast-committed MSCs, but PGC-1α increased to induce mitochondrial oxidative phosphorylation. Increased Akr1A1 inhibited the SIRT1-dependent pathway for decreasing the expressions of PGC-1α and TAZ but increasing PPAR γ in adipocyte-committed MSCs, hence promoting glycolysis in adipogenesis. In contrast, Akr1A1 expression, PKM2 activity and lactate production were all increased in adipocyte-differentiated cells with decreased PGC-1α for switching energy utilization to glycolytic metabolism. Reduced Akr1A1 expression in osteoblast-committed cells relieves its inhibition of SIRT1-mediated activation of PGC-1α and TAZ for facilitating osteogenesis and mitochondrial metabolism. SIGNIFICANCE: Several metabolism-involved regulators including Akr1A1, SIRT1, PPARγ, PGC-1α and TAZ were differentially expressed in osteoblast- and adipocyte-committed MSCs. More importantly, Akr1A1 was identified as a new key regulator for controlling the MSC lineage commitment in favor of adipogenesis but detrimental to osteogenesis. Such information should be useful to develop perspective new therapeutic agents to reverse the adipo-osteogenic differentiation of BMSCs, in a way to increase in osteogenesis but decrease in adipogenesis.

Effect of graft types for outcomes in revision anterior cruciate ligament reconstruction: A meta-analysis.

PURPOSE: This meta-analysis was performed to compare outcomes among different types of graft for revision anterior cruciate ligament reconstruction (ACLR). METHODS: A comprehensive search from Embase, PubMed, and Cochrane Library was performed to identify relevant articles. Studies that conducted a comparative analysis on outcomes among different types of grafts were included. A meta-analysis was performed using Review Manager 5.4 software. RESULTS: In total, 7 non-randomized studies with a minimum 1-year follow-up were included in analysis, and all studies compared outcomes between autograft and allograft. International Knee Documentation Committee subjective knee (IKDC) scores and side-to-side anterior laxity were not significantly different between autograft and allograft. Revision ACLR with allograft had a higher risk of failure than autograft at the final follow-up (OR=2.22, 95% CI=1.55-3.18). The rates of return to pre-injury type of sport and return to same and higher level of pre-injury sport were not significantly different between autograft and allograft. CONCLUSION: The outcomes of IKDC score, side-to-side anterior laxity, and rates of return to sport were not significantly different between autograft and allograft. Autografts provide a significantly lower risk of failure than allografts in revision ACLR. LEVEL OF EVIDENCE: IV; meta-analysis.

Modified arthroscopic intra-articular transtendinous looped biceps tenodesis leads to satisfactory functional outcomes and less frequent Popeye deformity compared to biceps tenotomy.

PURPOSE: The present study aimed to propose a modified intra-articular transtendinous looped biceps tenodesis (mTLBT) using a suture anchor and to compare the functional outcomes and incidence of Popeye deformities between biceps tenotomy and mTLBT. METHODS: Medical records of patients who underwent either tenotomy or mTLBT for the long head of the biceps tendon (LHBT) lesion between January 2016 and April 2021 were retrospectively reviewed. The inclusion criteria were patients aged 40-70 years with LHBT pathologies, such as superior labrum anterior to posterior (SLAP) lesions > type II, LHBT pulley system rupture with bicipital instability, and intra-articular LHBT tear. The exclusion criteria were full-thickness supraspinatus tears, frozen shoulder, shoulder fracture, and postoperative traumatic events that affected the operated shoulder. All patients were followed up for at least 1 year. Popeye deformity, bicipital cramping pain, visual analog scale (VAS) pain score, and functional outcome scores (University of California at Los Angeles [UCLA] and American Shoulder and Elbow Surgeons [ASES] scores) were recorded. Fisher's exact test and Chi-square test were used for categorical variables, whereas the Mann-Whitney U test was used for nonparametric variables. RESULTS: The mTLBT and tenotomy groups included 15 and 40 patients, respectively. The incidence of Popeye deformity and biceps cramping pain in the tenotomy group (52.5% and 50%, respectively) was significantly higher than that in the mTLBT group (13.3% and 20%, respectively) (p = 0.009 and p = 0.045, respectively). The postoperative VAS, UCLA, and ASES scores were not significantly different between the two groups. One patient in the tenodesis group experienced metallic-anchor pullout. CONCLUSION: mTLBT is an arthroscopic intra-articular top of the groove tenodesis that can be performed completely in the intra-articular space and is especially suitable for patients with an intact or partially torn rotator cuff. This technique is reliable for treating biceps pathologies as it results in similar functional outcome scores, lesser biceps cramping pain, and less frequent Popeye deformity compared to biceps tenotomy. LEVEL OF EVIDENCE: III.

Young Children with a Bucket-Handle Tear to the Discoid Lateral Meniscus Successfully Treated Using Arthroscopic Saucerization and Repair: Two Case Reports.

Observations of a symptomatic discoid lateral meniscus in young children are infrequent. The objective of this report was to demonstrate the use of arthroscopic saucerization and repair for treating a bucket-handle tear of a lateral discoid meniscus in two young children. Two young children (a 28-month-old girl and a 5-year-old boy) presented with a bucket-handle tear of the complete type lateral discoid meniscus. Both patients received arthroscopic saucerization and repair. A full knee extension under a long leg cast was applied for one month after surgery. The two patients were able to achieve a full range of motion of their operated knees without limping or presenting an antalgic gait at the third month after surgery. Both patients and their parents felt satisfied with the treatment at the 2- and 3-year follow-ups, respectively. Our results demonstrated that arthroscopic saucerization and repair seems to be an effective treatment for bucket-handle tears of the lateral discoid meniscus in young children-even those younger than 3 years old. We reported the youngest case (a 28-month-old girl) in comparison with the findings from a literature review.

Successful Plate Fixation with Long Intramedullary Fibula Bone Graft for Periprosthetic Femur Fracture: A Case Report.

Background and objectives: Treatment of a displaced or comminuted periprosthetic distal femur fracture is challenging, especially in patients with osteoporosis. In this case report, we shared our successful surgical experience of using a long intramedullary fibula bone graft in a plate fixation surgery for a periprosthetic distal femur fracture in an extremely elderly patient with osteoporosis. Case report: A 95-year-old woman with severe osteoporosis (bone mineral density level: -3.0) presented with right knee pain and deformity after a fall, and a right periprosthetic distal femur fracture was identified. The patient underwent an open reduction and an internal plate fixation surgery with the application of a long intramedullary fibular bone graft. Due to a solid fixation, immediate weight-bearing was allowed after the surgery. She could walk independently without any valgus or varus malalignment or shortening 3 months after the surgery. A solid union was achieved 4 months postoperatively. Conclusions: We present a case wherein a long intramedullary allogenous fibula strut bone graft was used successfully to treat a right periprosthetic femur fracture in an extremely elderly patient. A long allogenous fibula bone graft can act not only as a firm structure for bridging the bone defect but also as a guide for precise component alignment. We believe this treatment option for periprosthetic fractures is beneficial for achieving biological and mechanical stability and facilitates early mobilization and weight-bearing for the patient.

Biomechanical comparisons of hook plate and screw fixations in split-type greater tuberosity fractures of the humerus.

BACKGROUND: Screws and plate are commonly utilized for the fixation of split-type humeral greater tuberosity (GT) fractures. However, the mechanical properties of these 2 types of fixation methods have not been compared directly. The aim of the present study was to evaluate the classic 2 screws fixation with hook locking plate from a mechanical perspective. METHODS: Sixteen synthetic humerii (Sawbones Pacific Research Laboratories, Vashon, WA, USA) were divided into 2 groups. An osteotomy was performed to simulate a split-type GT fracture. Group A (n = 8) was fixed with 2 standard parallel screws. Group B (n = 8) was fixed with a hook plate. Each specimen was tested with traction force at 45° shoulder abduction. Following the 20-N preload, a 500-cycle loading test was applied with a force ranging from 20 to 200 N (valley/peak), and the interfragmental displacement was measured periodically at intervals of 100 cycles. Finally, all the specimens were pulled with destructive force at a rate of 5 mm/min until catastrophic failure. RESULTS: The hook plate exhibited greater construct stiffness than the screw fixation (63.2 ± 6.1 N/mm vs. 40.9 ± 3.4 N/mm, P < .001). All of the specimens completed the entire cyclic loading test without catastrophic failure, and the fragment displacement after 500 cycles was 0.4 ± 0.2 mm for the hook plate and 2.1 ± 0.3 mm for screw fixation, which was statistically lower in the plate group (P < .001). In terms of failure load, the hook plate group exhibited a significantly greater value than the screw group (770.6 ± 94.6 vs. 427.5 ± 45.1 N/mm, P < .001). The failure modes of both fixation methods were distinct. CONCLUSION: In humeral GT fracture fixation, hook plate fixation appears to offer greater construct stiffness and failure load while maintaining fragment stability to resist a physiological traction force. The current study provides support from a mechanical perspective for the clinical application of the hook plate.

Owen, Sugaya, and Hayashida Classifications Give Poor Intra- and Inter-Rater Agreement on a Magnetic Resonance Imaging Evaluation of Subscapularis Tendon Retears.

PURPOSE: To investigate the intra- and inter-rater agreements for magnetic resonance imaging (MRI) evaluations of subscapularis tendon integrity at 6 months after arthroscopic rotator cuff repairs. METHODS: Patients who had isolated or combined subscapularis tears and had undergone arthroscopic rotator cuff repairs were retrospectively included. The exclusion criteria included revision of arthroscopic surgery, minor subscapularis tears without repair, and inadequate postoperative images. MRI scans 6 months after surgery were used for the purpose of accessing the integrity of the subscapularis tendons. Three orthopaedic surgeons blindly evaluated the images twice at 2-week intervals. Three currently available classifications were used: the Owen classification, the Sugaya classification, and the Hayashida classification. Dichotomization and trichotomization methods were used for the Sugaya classification and Hayashida classifications. The aforementioned classification scores were combined for the agreement evaluation. Intra- and inter-rater agreement was assessed by calculating the Fleiss' kappa coefficients. RESULTS: A total of 35 patients were included. Both the Owen and Hayashida classifications had poor inter-rater agreements (κ = 0.10 and 0.04, respectively) and poor-to-weak intra-rater agreements (κ = 0.27-0.44 and 0.16-0.45, respectively). The Sugaya classification had poor inter-rater agreement (κ = 0.10) and poor intra-rater agreements (κ = 0.16-0.32). Dichotomization and trichotomization of Sugaya and Hayashida classifications did not lead to superior agreements. The classification combination resulted in poor inter- and intra-rater agreements (κ = 0.01-0.12 and 0.08-0.39, respectively). CONCLUSIONS: The Owen classification, Sugaya classification, and Hayashida classification had poor intra- and inter-rater agreement in terms of evaluating subscapularis tendon re-tears on 6 months' postoperative MRI. The dichotomized and trichotomized classifications as well as the combined classifications from currently available classifications did not lead to superior agreements. LEVEL OF EVIDENCE: Level IV, diagnostic: case series.

"Flip lid" type of lateral tibia plateau fracture with a meniscus radial tear: A case report.

CASE: A 45-year-old woman sustained a unique lateral tibia plateau fracture pattern with a vertically rotated fragment composed of an intact articular surface and subchondral bone. During open reduction and internal fixation (ORIF), a full thickness radial tear of the lateral meniscus was found, which was repaired under direct visualization through arthrotomy. At final follow-up, the patient regained pain-free activity with good meniscus healing, as confirmed with a second-look arthroscopic examination. CONCLUSION: This case represents an undescribed fracture pattern that indicates an associated meniscus injury. A thorough evaluation, including Magnetic Resonance Imaging should be considered. One-stage ORIF followed with meniscus repair represents a good treatment option.

Modified Superior Capsule Reconstruction Using the Long Head of the Biceps Tendon as Reinforcement to Rotator Cuff Repair Lowers Retear Rate in Large to Massive Reparable Rotator Cuff Tears.

PURPOSE: To retrospectively assess the clinical outcomes of the patients with large to massive reparable RCTs treated by arthroscopic rotator cuff repair (ARCR) combined with modified superior capsule reconstruction (mSCR) using the long head of biceps tendon (LHBT) as reinforcement with a minimum of 2 years of follow-up. METHODS: We retrospectively evaluated 40 patients with large to massive reparable RCTs who underwent ARCR and mSCR (group I) between February 2017 and June 2018 (18 patients) or underwent ARCR and tenotomy of LHBT performed at the insertion site (group II) between January 2015 and January 2017 (22 patients). The pain visual analog score (VAS) was assessed preoperatively and 1, 3, 6, 12, 24 months postoperatively. American Shoulder and Elbow Surgeons (ASES) scores, the University of California, Los Angeles (UCLA) shoulder rating scale, and active range of motion (AROM) were assessed before surgery and 6, 12, and 24 months after surgery. The integrity of the rotator cuff and mSCR was evaluated using magnetic resonance images at 12 months postoperatively. RESULTS: After surgery, both groups had significantly improved in VAS, ASES, UCLA and AROM scores in the final follow-up. There were no significant between-group differences in the characteristics of the patients before surgery. Group I had improved pain relief at 1 month (P < .001) and at 3 months (P < .01) after surgery. For the AROM, group I (flexion, external rotation, internal rotation) demonstrated better improvement than group II 6 months after surgery (all P < .05) and better internal rotation 12 and 24 months after surgery (all P < .05). The mSCR survival rate was 94.4% (17/18). The retear rate of repaired rotator cuffs for groups I and II was 16.7% (3/18) and 40.9% (9/22), respectively, and the differences were significant (P < .046). CONCLUSIONS: ARCR combined with mSCR using LHBT as reinforcement may lead to a lower retear rate and earlier functional recovery than conventional ARCR with tenotomy of LHBT for large to massive reparable RCTs. LEVEL OF EVIDENCE: Level III, retrospective therapeutic comparative trial.

Does using high-tensile strength tape improve the fixation strength in tendon graft fixation with needleless suture wrapping techniques compared to a suture?

PURPOSE: To compare the biomechanical properties of a high-tensile strength suture and high-tensile strength tape in tendon graft fixation using two needleless suture wrapping techniques, the modified Prusik knot and modified rolling hitch. METHODS: Two needleless suture wrapping techniques, the modified rolling hitch (MR) and modified Prusik knot (MP), were utilized. Meanwhile, two kinds of suture materials, a No. 2 braided nonabsorbable high-strength suture (S) and a 1.3 mm high-tensile strength tape (T), were used. A total of 40 porcine tendons were used, which were randomly divided into four groups. Each group was assigned to one of the following groups: MRS, MRT, MPS, and MPT. Each specimen was pretensioned to 100 N for three cycles, cyclically loaded from 50 to 200 N for 200 cycles, and finally loaded to failure. RESULTS: The MRT group (34.1 ± 3.5%) had a significantly higher value compared with the MRS (29.7 ± 2.3%), MPS (27.1 ± 3.6%) and MPT (29.5 ± 4.0%) groups in term of elongation after cyclic loadings (p = 0.002). In terms of ultimate failure load, there were no significant differences in the MRS (401 ± 27 N), MRT (380 ± 27 N), MPS (398 ± 44 N) and MPT (406 ± 49 N) values (p = 0.539). All specimens failed due to suture breakage at the knots. CONCLUSION: Compared with the high-tensile strength suture, using the high-tensile strength tape lead to greater elongation after cyclic loading when the modified rolling hitch was used. No differences in terms of elongation after cyclic loading and load to failure were found between the high-tensile strength suture and tape using the modified Prusik knot.

Superior biomechanical properties and tying time with the modified Prusik knot and Wittstein suture loop to the Krackow stitch.

INTRODUCTION: The purposes of the study were to compare (1) the biomechanical properties of the modified Prusik knot, Wittstein suture loop, and Krackow stitch fixation, and (2) the knot tying times for tendon graft fixation among the Krackow stitch, modified rolling hitch, modified Prusik knot, and Wittstein suture loop. MATERIALS AND METHODS: First, 33 fresh-frozen porcine flexor profundus tendons were randomly divided into three groups of 11 specimens. The experimental procedure was designed to assess elongation of the suture-tendon construct across the modified Prusik knot, Wittstein suture loop, and the Krackow stitch. Multistranded nonabsorbable sutures were used. Each specimen was pre-tensioned to 100 N for three cycles, cyclically loaded to 200 N for 200 cycles, and finally loaded to failure. Elongation, load to failure, and failure mode of each specimen were recorded. Second, the knot tying times for modified rolling hitch, modified Prusik knot, Wittstein suture loop, and Krackow stitch were investigated. The measurements were taken on three different occasions to account for intraobserver repeatability and interobserver reproducibility. RESULTS: The elongation after cyclic loading of the modified Prusik knot (22 ± 6%), Wittstein suture loop (25 ± 2%) were significantly smaller than the Krackow stitch (31 ± 5%) (p = 0.001 and 0.003, respectively). The failure loads of three groups were not significantly from one another. Meanwhile, the Krackow stitch group (80.9 ± 16.7 s) had significantly longer average procedure time than the modified rolling hitch group (9.2. ± 1.9 s) (p < 0.001), modified Prusik knot group (9.1 ± 1.8 s) (p < 0.001), and Wittstein suture loop group (9.0 ± 2.2 s) (p < 0.001). CONCLUSIONS: Compared to the Krackow stitch, the modified Prusik knot and Wittstein suture loop had less elongation after cyclic loading and similar ultimate load to failure in this porcine in vitro biomechanical study. Shorter knot tying times were required to complete the modified rolling hitch, modified Prusik knot, and Wittstein suture loop than the Krackow stitch.

Correction to: Superior biomechanical properties and tying time with the modified Prusik knot and Wittstein suture loop to the Krackow stitch.

Due to an error during the production process, the legend.

Technique using the modified rolling hitch for split peroneus brevis tendon transfer in lateral ankle stabilization.

We report our technique for split peroneus brevis lateral ankle stabilization using the modified rolling hitch for tendon graft fixation. Applying the modified rolling hitch for tendon grasping in this procedure was useful, and it could decrease the surgical time and avoid the tendon injury caused by the needle.

Biomechanical study comparing biceps wedge tenodesis with other proximal long head of the biceps tenodesis techniques.

PURPOSE: The purpose of this biomechanical study was to compare the ultimate failure strength, stiffness, cyclic displacement, and failure displacement of 5 different proximal biceps tenodesis fixation techniques, specifically comparing wedge tenodesis with the other 4 techniques. METHODS: Forty cadaveric shoulders underwent 1 of 5 long head of the biceps tenodesis techniques and were cyclically tested to failure by use of tensile forces applied parallel to the longitudinal axis of the humerus. A preload at 5 N was applied for 2 minutes, followed by cyclical loading for 500 cycles from 5 to 70 N at 1 Hz and a pull-to-failure test at 1 mm/s. The techniques studied were wedge tenodesis, suture anchor fixation, suprapectoral interference screw fixation, T-wedge tenodesis, and the percutaneous intra-articular transtendon (PITT) technique. Cyclic displacement, failure displacement, and stiffness were calculated. RESULTS: The wedge tenodesis technique had an ultimate failure load similar to interference screw fixation and a greater ultimate failure load and stiffness than the suture anchor, PITT, and T-wedge techniques (P < .05). CONCLUSIONS: In this biomechanical study, wedge tenodesis was found to have an ultimate failure load similar to interference screw fixation and a greater ultimate failure load and stiffness than the suture anchor, PITT, and T-wedge techniques. CLINICAL RELEVANCE: On biomechanical testing, wedge tenodesis compares favorably with other techniques and may be a useful clinical option for proximal biceps tenodesis.

Synovial osteochondromatosis of the second metatarsophalangeal joint: a case report.

Synovial osteochondromatosis is usually monoarticular, involving a large joint. Common locations include the knee, elbow, shoulder, and hip. It is not very common in the ankle, and it is very rare in the smaller joints of the foot. To our knowledge, and with the exception of 4 cases that occurred in the great toe, this condition has never been described in other metatarsophalangeal joints. In this report, we presented a case of synovial osteochondromatosis in the second metatarsophalangeal joint and reviewed the literature.