A facile method for separating fine water droplets dispersed in oil through a pre-wetted mesh membrane.

To achieve the successful separation of emulsions containing fine dispersed droplets and low volume fractions, a membrane with pore sizes comparable to or smaller than the droplet size is typically required. Although this approach is effective, its utilization is limited to the separation of emulsions with relatively large droplets. To overcome this limitation, a secondary membrane can be formed on the primary membrane to reduce pore size, but this can also be time-consuming and costly. Therefore, a facile and effective method is still required to be developed for separating emulsions with fine droplets. We introduce a pre-wetted mesh membrane with a pore size significantly larger than droplets, easily fabricated by wetting a hydrophilic stainless-steel mesh with water. Applying this membrane to emulsion separation via gravity-driven flow confirms a high efficiency greater than 98%, even with droplets approximately 10 times smaller than the pore size.

Complexation of Poly(ethylene glycol)-(ds)OligoDNA Conjugates with Ionic Liquids.

We report the complexation of poly(ethylene glycol) conjugated double-stranded oligoDNA (PEG-(ds)oligoDNA) with imidazolium-based ionic liquids (ILs) to form polyelectrolyte complex aggregates (PCAs). The PEG-(ds)oligoDNA conjugates are prepared following a solution-phase coupling reaction. The binding of PEG-(ds)oligoDNA with either 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) or 1-hexyl-3-methylimidazolium tetrafluoroborate ([HMIM][BF4]) is confirmed by a fluorescence displacement assay. Both ILs show stronger binding affinity to PEG-(ds)oligoDNA than bare (ds)oligoDNA due to the PEG-assisted increase in IL cation concentration in the vicinity of (ds)oligoDNA. The complex morphology formed at various amine (N) to phosphate (P) ratios is also examined. At high N/P ratios above 4, nanosized PCAs are formed, driven by a counterion-mediated attraction among the IL-bound (ds)oligoDNA segments and stabilized by the conjugated PEG segments. The PCAs exhibit near-neutral surface charges and resistance to DNase degradation, suggesting their potential use in gene delivery applications.

Synthesis of Aluminum-Based Metal-Organic Framework (MOF)-Derived Carbon Nanomaterials and Their Water Adsorption Isotherm.

The characteristics of water vapor adsorption depend on the structure, porosity, and functional groups of the material. Metal-organic framework (MOF)-derived carbon (MDC) is a novel material that exhibits a high specific area and tunable pore sizes by exploiting the stable structure and porosity of pure MOF materials. Herein, two types of aluminum-based MOFs were used as precursors to synthesize hydrophobic microporous C-MDC and micro-mesoporous A-MDC via carbonization and activation depending on the type of ligands in the precursors. C-MDC and A-MDC have different pore characteristics and exhibit distinct water adsorption properties. C-MDC with hydrophobic properties and micropores exhibited negligible water adsorption (108.54 mgg-1) at relatively low pressures (P/P0~0.3) but showed a rapid increase in water adsorption ability (475.7 mgg-1) at relative pressures of about 0.6. A comparison with the isotherm model indicated that the results were consistent with the theories, which include site filling at low relative pressure and pore filling at high relative pressure. In particular, the Do-Do model specialized for type 5 showed excellent agreement.

Asymmetric Supercapacitors Using Porous Carbons and Iron Oxide Electrodes Derived from a Single Fe Metal-Organic Framework (MIL-100 (Fe)).

MOF-derived carbon (MDC) and metal oxide (MDMO) are superior materials for supercapacitor electrodes due to their high specific capacitances, which can be attributed to their high porosity, specific surface area (SSA), and pore volume. To improve the electrochemical performance, the environmentally friendly and industrially producible MIL-100 (Fe) was prepared using three different Fe sources through hydrothermal synthesis. MDC-A with micro- and mesopores and MDC-B with micropores were synthesized through carbonization and an HCl washing process, and MDMO (α-Fe2O3) was obtained by a simple sintering in air. The electrochemical properties in a three-electrode system using a 6 M KOH electrolyte were investigated. These novel MDC and MDMO were applied to an asymmetric supercapacitor (ASC) system to overcome the disadvantages of traditional supercapacitors, enhancing energy density, power density, and cyclic performance. High SSA materials (MDC-A nitrate and MDMO iron) were selected for negative and positive electrode material to fabricate ASC with KOH/PVP gel electrolyte. As-fabricated ASC resulted in high specific capacitance 127.4 Fg-1 at 0.1 Ag-1 and 48.0 Fg-1 at 3 Ag-1, respectively, and delivered superior energy density (25.5 Wh/kg) at a power density 60 W/kg. The charging/discharging cycling test was also conducted, indicating 90.1% stability after 5000 cycles. These results indicate that ASC with MDC and MDMO derived from MIL-100 (Fe) has promising potential in high-performance energy storage devices.

Biodegradable Block Copolymer-Tannic Acid Glue.

Bioadhesives are becoming an essential and important ingredient in medical science. Despite numerous reports, developing adhesive materials that combine strong adhesion, biocompatibility, and biodegradation remains a challenging task. Here, we present a biocompatible yet biodegradable block copolymer-based waterborne superglue that leads to an application of follicle-free hair transplantation. Our design strategy bridges self-assembled, temperature-sensitive block copolymer nanostructures with tannic acid as a sticky and biodegradable polyphenolic compound. The formulation further uniquely offers step-by-step increases in adhesion strength via heating-cooling cycles. Combining the modular design with the thermal treating process enhances the mechanical properties up to 5 orders of magnitude compared to the homopolymer formulation. This study opens a new direction in bioadhesive formulation strategies utilizing block copolymer nanotechnology for systematic and synergistic control of the material's properties.

Potential toxicity of inorganic ions in particulate matter: Ion permeation in lung and disruption of cell metabolism.

Exposure to ambient particulate matter (PM) is associated with adverse health effects. Yet, due to the complexity of its chemical composition, the molecular effects of PM exposure and the mechanism of PM-mediated toxicity remain largely unknown. Here, we show that water-soluble inorganics such as nitrate and sulfate ions, rather than PM itself, rapidly penetrate the lung surfactant barrier to the alveolar region and perturb gene expression in the lungs. Through high-throughput sequencing of lung adenocarcinoma cells, we find that exposure to nitrate and sulfate ions activates the cholesterol biosynthetic metabolism and induces the expression of genes related to tumorigenesis. Transcriptome analysis of mouse lungs exposed to nitrate/sulfate aerosols reveals interferon gamma-associated immune response. Interestingly, we find that exposure to a nitrate/sulfate mixture leads to a unique gene expression pattern that is not observed when nitrate or sulfate is treated alone. Our work suggests that the water-soluble ions are a potential source of PM-mediated toxicity and provides a roadmap to unveil the molecular mechanism of health hazards from PM exposure.

Swelling-based preparation of polypropylene nanocomposite with non-functionalized cellulose nanofibrils.

Dispersion of nanofillers in a polymer matrix is one of the most important steps in preparing polymer nanocomposites. However, hydrophobic polymers and hydrophilic nanofillers are intrinsically incompatible, making it difficult to mix them homogeneously. Here, we propose the swelling-based particle adsorption method (SPA) providing a simple route to disperse cellulose nanofibrils (CNFs) within incompatible polypropylene (PP) matrix without surface functionalization of CNFs. The SPA enables CNFs to adsorb onto the surface of PP particles using a small amount of solvent. PP/CNFs composite films fabricated from the SPA showed increased Young's modulus by 80%, which agrees well with a theoretical prediction proving nano-dispersed. Furthermore, simply mixing a bit of polypropylene-graft-maleic anhydride can improve the tensile strength by 30% and the elongation at break by 10-fold than that of PP/CNFs composites. The SPA can be universally applied to any incompatible polymer-nanofiller pairs for the fabrication of nanocomposite materials.

Solvent-Free Deposition of Ultrathin Copolymer Films with Tunable Viscoelasticity for Application to Pressure-Sensitive Adhesives.

A new fabrication method for an ultrathin (500 nm thick) pressure-sensitive adhesive (PSA) was demonstrated by utilizing a series of in situ cross-linked viscoelastic copolymer films. Viscoelastic films composed of poly(2-hydroxyethyl acrylate- co-2-ethylhexyl acrylate) were synthesized successfully in a one-step manner by an initiated chemical vapor deposition (iCVD) process, where free-radical polymerization is triggered in the vapor phase either by heat or UV, or a combination of both. In particular, the photoinitiated chemical vapor deposition method generated a highly cross-linked polymer film, whereas cross-linking of the copolymer film was suppressed greatly in the conventional thermal iCVD method. A combination of thermal and photoinitiated chemical vapor deposition could regulate the cross-linking density of the copolymer films. We controlled the cross-linking density of the copolymer films to exhibit a viscoelastic property so that they would readily adhere to various kinds of substrates with only 500 nm thick copolymer PSA. The adhesion performance of the PSA was systematically optimized by tuning the copolymer composition as well as the cross-linking density, and consequently a high shear strength of more than 85.2 ± 5 N/cm2 was achieved despite the 500 nm thickness. In addition, the PSA was completely transparent. We expect that the ultrathin PSAs developed in this work will be utilized widely for the realization of various soft electronic devices, which usually require strong adhesion, tunable viscoelastic properties, and optical transparency.

Surface charge regulation of carboxyl terminated polystyrene latex particles and their interactions at the oil/water interface.

We study electrostatic interactions of polystyrene particles at an oil/water interface controlled by a chemical reaction of carboxylate surface functional groups. By replacing the carboxyl functional groups with hydrocarbon chains using the well-known EDC (1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide) coupling reaction, the surface charge density decreases while the hydrophobicity of the colloid surface increases. Direct visualization of the particle-laden interface reveals that, depending on the extent of hydrocarbon coupling, the strength of the electrostatic repulsion can be regulated: the repulsive interaction increases with the reaction, removing aggregates, but rapidly decreases if the reaction proceeds too much, forming a large aggregation. This simple reaction, thus, dramatically changes the structures of the colloidal monolayers at the oil/water interface. We conclude that such structural change is the result of change of the repulsive interactions from the oil phase, although interactions in the water phase are also changed slightly.