Advanced flexible transvaginal mesh with high visibility under computerized tomography (CT) scan.

Pelvic floor disorders, including pelvic organ prolapse (POP) and stress urinary incontinence (SUI), are serious and very common. Surgery is commonly undertaken to restore the strength of the vaginal wall using transvaginal surgical mesh (TVM). However, up to 15% of TVM implants result in long-term complications, including pain, recurrent symptoms, and infection.Clinical Relevance- In this study, a new bioengineered TVM has been developed to address these issues. The TVM is visible using noninvasive imaging techniques such as computed tomography (CT); it has a highly similar structural profile to human tissue and potential to reduce pain and inflammation. These combined technological advances have the potential to revolutionize women's health.

A Green Synthesis Route to Derive Carbon Quantum Dots for Bioimaging Cancer Cells.

Carbon quantum dots (CQDs) are known for their biocompatibility and versatile applications in the biomedical sector. These CQDs retain high solubility, robust chemical inertness, facile modification, and good resistance to photobleaching, which makes them ideal for cell bioimaging. Many fabrication processes produce CQDs, but most require expensive equipment, toxic chemicals, and a long processing time. This study developed a facile and rapid toasting method to prepare CQDs using various slices of bread as precursors without any additional chemicals. This fast and cost-effective toasting method could produce CQDs within 2 h, compared with the 10 h process in the commonly used hydrothermal method. The CQDs derived from the toasting method could be used to bioimage two types of colon cancer cells, namely, CT-26 and HT-29, derived from mice and humans, respectively. Significantly, these CQDs from the rapid toasting method produced equally bright images as CQDs derived from the hydrothermal method.

Carbon Dot Therapeutic Platforms: Administration, Distribution, Metabolism, Excretion, Toxicity, and Therapeutic Potential.

Ultrasmall nanoparticles are often grouped under the broad umbrella term of "nanoparticles" when reported in the literature. However, for biomedical applications, their small sizes give them intimate interactions with biological species and endow them with unique functional physiochemical properties. Carbon quantum dots (CQDs) are an emerging class of ultrasmall nanoparticles which have demonstrated considerable biocompatibility and have been employed as potent theragnostic platforms. These particles find application for increasing drug solubility and targeting, along with facilitating the passage of drugs across impermeable membranes (i.e., blood brain barrier). Further functionality can be triggered by various environmental conditions or external stimuli (i.e., pH, temperature, near Infrared (NIR) light, ultrasound), and their intrinsic fluorescence is valuable for diagnostic applications. The focus of this review is to shed light on the therapeutic potential of CQDs and identify how they travel through the body, reach their site of action, administer therapeutic effect, and are excreted. Investigation into their toxicity and compatibility with larger nanoparticle carriers is also examined. The future of CQDs for theragnostic applications is promising due to their multifunctional attributes and documented biocompatibility. As nanomaterial platforms become more commonplace in clinical treatments, the commercialization of CQD therapeutics is anticipated.

Improving in vitro and in vivo antibacterial functionality of Mg alloys through micro-alloying with Sr and Ga.

Despite of technical advancements in design and development of new biomaterials, device-related infections continue to occur and can be life-threatening. Differing from existing research work pertaining to introducing antibacterial function upon device surface, this study attempts to address such germ-infection issues through controlled release of antibacterial species from bulk gallium (Ga) and strontium (Sr) containing magnesium (Mg) alloys. To validate such a conceptual framework, Mg alloys containing micro-level concentrations of Ga and/or Sr (0.1 wt%) are employed as model materials, along with commercially pure Mg and titanium (Ti) as control groups. Biodegradation progress of such metal specimens is examined through pH and mass loss measurements, and inductively coupled plasma - atomic emission spectrometry (ICP-AES) as a function of immersion time in Trypticase Soy Broth (TSB) solution under physiological conditions. In vitro biocompatibility and antibacterial performance are characterised through MTT proliferation assay with human mesenchymal stem cells (hMSCs) and the spread plate method with three representative bacterial strains, i.e. S. aureus (ATCC 43300), E. coli (ATCC 25922), and S. epidermidis (ATCC 35984). Animal tests are performed through implanting target metal rods into femurs of Sprague Dawley rats, accompanied with injection of S. aureus to build a model of osteomyelitis. Results demonstrate that such lean additions of Ga and/or Sr reduce the degradation kinetics of Mg matrix, and the release of Ga3+ ions plays a crucial role in disabling the viability of all selected bacterial strains. The histological tests confirm that the growth of fibrous tissue has been accelerated in the vicinity of Mg-based implants, in comparison to that of blank and c.p. Ti controls. It is also striking that the smallest number density of S. aureus bacteria on the surface of the retrieved Ga-containing Mg rod implants. Such a proof-of-concept study provides a new and feasible strategy to address the notorious device-infection issues associated with biomedical implants for bone fracture management.

Recent Progress and Required Developments in Atmospheric Corrosion of Galvanised Steel and Zinc.

This paper reviews the progress in atmospheric corrosion of zinc since 2009. It firstly summarises the state of the art in 2009, then outlines progress since 2009, and then looks at the significance of this progress and the areas the need more research. Within this framework, it looks at climate effects, oxide formation, oxide properties, pitting, laboratory duplication of atmospheric corrosion, and modelling. The major findings are that there have been major advances in the fields understanding of the structure of corrosion patina, in particular their layered structure and the presence of compact layers, local corrosion attacks have been found to be a significant process in atmospheric corrosion and experiments under droplets are leading to new understanding of the criticality of drop size in regulating atmospheric corrosion processes. Further research is indicating that zinc oxide within corrosion products may promote the oxygen reduction reaction (ORR) and that, in porous oxides, the ORR would control pore chemistry and may promote oxide densification. There is a strong need for more research to understand more deeply the formation and properties of these layered oxides as well as additional research to refine and quantify our emerging understanding of corrosion under droplets.

Effect of Pseudomonas fluorescens on Buried Steel Pipeline Corrosion.

Buried steel infrastructure can be a source of iron ions for bacterial species, leading to microbiologically influenced corrosion (MIC). Localized corrosion of pipelines due to MIC is one of the key failure mechanisms of buried steel pipelines. In order to better understand the mechanisms of localized corrosion in soil, semisolid agar has been developed as an analogue for soil. Here, Pseudomonas fluorescens has been introduced to the system to understand how bacteria interact with steel. Through electrochemical testing including open circuit potentials, potentiodynamic scans, anodic potential holds, and electrochemical impedance spectroscopy it has been shown that P. fluorescens increases the rate of corrosion. Time for oxide and biofilms to develop was shown to not impact on the rate of corrosion but did alter the consistency of biofilm present and the viability of P. fluorescens following electrochemical testing. The proposed mechanism for increased corrosion rates of carbon steel involves the interactions of pyoverdine with the steel, preventing the formation of a cohesive passive layer, after initial cell attachment, followed by the formation of a metal concentration gradient on the steel surface.

Carbon dots as fluorescent probes for "off-on" detection of Cu2+ and L-cysteine in aqueous solution.

Copper ion (Cu(2+)) and L-cysteine (L-Cys) detection is critically important since an abnormal level of Cu(2+) or L-Cys is an indicator for many diseases. In this paper, we demonstrate an "off-on" approach for highly sensitive and selective detection of Cu(2+) and L-Cys using carbon dots (CDs) as fluorescent probes. CDs were prepared by using mesoporous silica (MS) spheres as nanoreactors. The binding ability of CDs towards metal ions was examined by comparing the fluorescence intensities of CDs before and after the addition of the metal ions. The addition of Cu(2+) cations leads to their absorption on the surface of CDs and the significant fluorescence quench of CDs (turn-off). The resulting in CDs-Cu(2+) system was found to be sensitive to L-Cys. The addition of L-Cys not only serves to shelter the CDs effectively from being quenched, but also to reverse the quenching and restore the fluorescence (turn-on) due to its ability to remove Cu(2+) from the surface of CDs. This method is facile, rapid, low cost, and environment-friendly. A detection limit as low as 2.3×10(-8) M for Cu(2+) and 3.4×10(-10) M for L-Cys is obtained, which is promising for biological applications.