Cytotoxicity evaluation, antibacterial effect, and degree of conversion of QAM-containing adhesives

Abstract The aim of this study was to evaluate the influence of adding quaternary ammonium methacrylates (QAMs) to experimental adhesives by assessing the degree of conversion (DC), cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. Two QAMs were added to an experimental adhesive: dimethylaminododecyl methacrylate bromododecane (DMADDM) or dimethylaminododecyl methacrylate bromohexadecane (DMAHDM) at three concentrations each: 1, 2.5, and 5 wt.%. Experimental adhesive without QAMs (control group) and commercially available Transbond XT Primer (3M Unitek, Monrovia, California, USA) were used for comparisons. The adhesives were tested for DC, cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. DC, cytotoxicity against fibroblasts, and antibacterial activity were analyzed using one-way ANOVA and Tukey's multiple comparisons. Cytotoxicity against keratinocytes was evaluated using the Kruskal Wallis and Dunn's post-hoc (α = 5%) tests. Transbond showed lower DC as compared to 5% DMAHDM, 1% DMADDM, and 5% DMADDM (p < 0.05). However, all groups presented proper DC when compared to commercial adhesives in the literature. In the evaluation of cytotoxicity against keratinocytes, Transbond induced higher viability than 2.5 wt.% groups (p < 0.05). Against fibroblasts, Transbond induced higher viability as compared to 5 wt.% groups (p < 0.05). DMAHDM at 5 wt.% reduced biofilm formation when compared to all the other groups (p < 0.05). Despite their cytotoxic effect against keratinocytes, gingival fibroblasts showed higher viability. DMAHDM at 5 wt.% decreased Streptococcus mutans viability. The incorporation of DMAHDM at 5 wt.% may be a strategy for reducing the development of white spot lesions.

Puricelli biconvex arthroplasty: an experimental study in sheep.

BACKGROUND: The aim of this study was to establish a sheep model of the Puricelli biconvex arthroplasty (ABiP) technique in sheep for evaluating its functional, biological and histological parameters. METHODS: Ten Corriedale black sheep were submitted to TMJ total reconstruction with poly(methyl methacrylate) (PMMA) using ABiP and euthanized after 45 (n = 5) or 90 (n = 5) days. Control animals (n = 2) underwent sham operations and were euthanized after 45 days. Variables were assessed before the surgery (T0), immediately after (T1) and at 45 or 90 postoperative days (T2). RESULTS: Histological analyses showed regression of inflammatory cells over the follow-up period. PMMA showed reduced porosity and roughness in the articular contact area. PMMA temporal components showed linear and volumetric wear in comparison to control, but no foreign body reaction was observed. The reconstructions were stable in all animals. The amplitude of mouth opening and left lateral movements were maintained, except for a reduction in the range of right lateral movements at day 90 in the experimental group. Clinical, macroscopic and radiographic observations showed that the reconstructions were stable. CONCLUSIONS: The analysis of functional, biological and histological parameters in sheep submitted to ABiP showed stable results of the procedure, with maintenance of body weight and all mandibular movements, save contralateral mandibular movement, suggesting that joint function was completely maintained following the procedure. This experimental study provides support for clinical results previously reported of the ABiP technique in TMJ reconstruction procedures.

Cost-related variables in the public purchase of dental materials for endodontic application: 10-year analysis

Aim: This study analyzed public procurements for different endodontic materials used in the Brazilian public health system and evaluated the variables related to their cost. Methods: A time-series study was performed by screening materials for endodontic application in the public Brazilian Databank of Healthcare Prices from 2010 to 2019. Data were categorized according to material composition and clinical application. The collated variables were used in a multiple linear regression model to predict the impact of unit price in procurement processes. Results: A total of 5,973 procurement processes (1,524,693 items) were evaluated. Calcium hydroxides were found in 79% of the observations (4,669 processes). Prices drop each year by US$1.87 while MTAs and epoxy resins are increasingly purchased at higher prices (US$50.87; US$67.69, respectively). The microregion, the procurement modality, and the type of institution had no influence on unit prices in the adjusted model (p > 0.05). Conclusions: Calcium hydroxide-based materials were the cheapest and most frequently purchased endodontic materials in the public health care system. Novel formulations are being implemented into clinical practice over time and their cost may be a barrier to the broad application of materials such as MTAs, despite their effectiveness

Impact of economic factors and knowledge translation on public procurement for dental adhesive systems

Abstract: This study aimed to screen the public procurement for dental adhesives in a public health system and evaluate the variables associated with the type and cost of purchased materials. A time series was conducted with secondary data collated from the Brazilian Databank of Healthcare Prices (BDHP). All public procurements for adhesive systems registered from 2010 to 2019 were collated. The frequency of purchase was described, and a multiple linear regression model was used to assess the influence of unit price on predictor variables. Multinomial logistic regression was conducted to describe the influence of selected variables on the probability of purchase for different classes of adhesive systems. A total of 2,752 purchases were analyzed, and the total cost of these materials reached US$ 7,022,659.00 in the 10 analyzed years. The 3-step Etch & Rinse adhesives corresponded to 45.63% of the processes, with increased probability of being purchased over time. The process conducted by public universities in recent years, using the auction modality, presented lower unit prices. The year of purchase, the type of institutions, the institution's location, and the procurement modality influenced the procurement process. The performed analyses contribute to the understanding of the variables associated with the procurements for adhesive systems, providing valuable information for rationalizing public expenditure and for implementing evidence-based practices to guarantee cost-effective and clinically effective procedures for users of the Brazilian public healthcare system.

Nanoscale mineralization of cell-laden methacrylated gelatin hydrogels using calcium carbonate-calcium citrate core-shell microparticles.

Conventional biomaterials developed for bone regeneration fail to fully recapitulate the nanoscale structural organization and complex composition of the native bone microenvironment. Therefore, despite promoting osteogenic differentiation of stem cells, they fall short of providing the structural, biochemical, and mechanical stimuli necessary to drive osteogenesis for bone regeneration and function. To address this, we have recently developed a novel strategy to engineer bone-like tissue using a biomimetic approach to achieve rapid and controlled nanoscale mineralization of a cell-laden matrix in the presence of osteopontin, a non-collagenous protein, and a supersaturated solution of calcium and phosphate medium. Here, we build on this approach to engineer bone regeneration scaffolds comprising methacrylated gelatin (GelMA) hydrogels incorporated with calcium citrate core-shell microparticles as a sustained and reliable source of calcium ions for in situ mineralization. We demonstrate successful biomineralization of GelMA hydrogels by embedded calcium carbonate-calcium citrate core-shell microparticles with the resultant mineral chemistry, structure, and organization reminiscent of that of native bone. The biomimetic mineralization was further shown to promote osteogenic differentiation of encapsulated human mesenchymal stem cells even in the absence of other exogenous osteogenic induction factors. Ultimately, by combining the superior biological response engendered by biomimetic mineralization with the intrinsic tissue engineering advantages offered by GelMA, such as biocompatibility, biodegradability, and printability, we envision that our system offers great potential for bone regeneration efforts.

Magnetic motion of superparamagnetic iron oxide nanoparticles- loaded dental adhesives: physicochemical/biological properties, and dentin bonding performance studied through the tooth pulpal pressure model.

The limited durability of dentin bonding harshly shortens the lifespan of resin composites restorations. The controlled, dynamic movement of materials through non-contacting forces provides exciting opportunities in adhesive dentistry. We, herein, describe comprehensive investigations of a new dental adhesive with superparamagnetic iron oxide nanoparticles (SPIONs) sensitive to magnetic fields for bonding optimization. This contribution outlines a roadmap of (1) designing and tuning of an adhesive formulation containing SPIONs to enhance penetrability into etched dentin guided by magnetic-field; (2) employing a clinically relevant model of simulated hydrostatic pulpal pressure on the microtensile bond to dentin; and (3) investigating a potential antibacterial effect of the formulated adhesives, and their biocompatibility. SPION-concentration-dependency chemical and mechanical behavior was shown via the degree of conversion, ultimate tensile strength, and micro shear bond strength to dentin. The effects of SPIONs carried on a dental adhesive on the bonding strength to dentin are studied in depth by combining experiments with in vitro simulated model. The results show that under the guided magnetic field, 0.07 wt.% of SPIONs-doped adhesive increased the bond strength that surpasses the reduction caused by hydrostatic pulpal pressure. Using a magnetic guide workflow during the bonding procedures, SPIONs-doped adhesives improved dentin's adhesion without changing adhesives' physicochemical properties. This outcome addresses the key challenge of poor resin infiltration of dentin's conventional total etching during the bonding procedure. The real-time magnetic motion of dental adhesives may open new paths to enhance resin-based restorations' longevity. STATEMENT OF SIGNIFICANCE: In this study, dental adhesives containing superparamagnetic iron oxide nanoparticles (SPIONs) were developed to enhance penetrability into dentin guided by a magnetic field. The adhesives were screened for physical, chemical, antibacterial properties, and cytotoxicity. For the first time, simulated pulpal pressure was used concurrently with the magnetic field to simulate a clinical setting. This approach showed that it is feasible to overcome pulpal pressure jeopardization on bond strength when SPIONs and a magnetic field are applied. The magnetic-responsive adhesives had great potential to improve bond strength, opening new paths to enhance resin-based restorations' longevity without affecting adhesives' biological properties. The use of magnetic-responsive particles and magnetically assisted motion is a promising strategy to improve the sealing ability of dental adhesives.

The influence of the particle's size on the setting reaction of sol-gel derived calcium silicate particles / A influência do tamanho de partícula na reação de presa de cimentos de silicate de cálcio produzidos por sol-gel

Introduction: This study aims to analyze the influence of particles size of sol-gel derived calcium silicate particles in the setting reaction of bioactive endodontic cements. Materials and Methods: Sol-gel derived calcium silicate particles were synthesized and sieved to separate the particles in different sizes: CS400, CS200, and CS100. A commercial MTA (Control) was used as control. The particle size and the specific surface area were assessed by laser diffraction and nitrogen adsorption. The cements were prepared with water as the liquid for the reaction. The setting time was conducted according to ISO 6876, and the setting kinetics was analyzed by Fourier trans-formed infrared spectroscopy (FTIR) at different time points between 120s to 72h. Results: The particle size varied from 9.45µm (CS400 ) to 31.01 (Control). The higher specific surface area valuer reached 15.14g/cm2 in the CS400. The smallest particle sizes, the higher specific surface area, and the lowest setting time were found for CS400 (p < 0.05). Control presented the highest setting time (p < 0.05). The FTIR analyses showed the differences in materials structure over time, with faster hydration and crystallization for CS400. The setting kinetics was slower for Control even when compared to a sol-gel derived group with similar particle size. Conclusion:The route of synthesis and the particle size influences the setting reaction of calcium silicate-based cements. The reduction of particle size for sol-gel derived calcium silicates lead to the acceleration of the setting reaction of the produced bioactive endodontic cement.

Introdução: Este estudo tem como objetivo analisar a influência do tamanho de partículas de silicato de cálcio derivadas de sol-gel na reação de presa de cimentos endodônticos bioativos. Materiais e Métodos: Partículas de silicato de cálcio derivadas de sol-gel foram sintetizadas e peneiradas para separar as partículas em diferentes tamanhos: CS400, CS200 e CS100. Um MTA comercial (Controle) foi usado como controle. O tamanho das partículas e a área superficial específica foram avaliados por difração a laser e adsorção de nitrogênio. Os cimentos foram preparados com água como líquido para a reação. O tempo de presa foi conduzido de acordo com a ISO 6876, e a cinética de presa foi analisada por espectroscopia de infravermelho transformada de Fourier (FTIR) em diferentes pontos de tempo entre 120s a 72h. Resultados: O tamanho de partícula variou entre 9,45µm (CS400) e 31,01 (Controle). A maior área de superfície foi encontrada nas partículas do grupo CS400 (15.14g/cm2). Os menores tamanhos de partícula, a maior área de superfície específica e o menor tempo de presa foram encontrados para CS400 (p < 0,05). O Control apresentou o maior tempo de presa (p < 0,05). As análises de FTIR mostraram as diferenças na estrutura dos materiais ao longo do tempo, com hidratação e cristalização mais rápidas para CS400. A cinética de presa foi mais lenta para Control mesmo quando comparado a um grupo derivado de sol-gel com tamanho de partícula semelhante. Conclusão: A rota de síntese e o tamanho das partículas influenciam a reação de endurecimento dos cimentos à base de silicato de cálcio. A redução do tamanho de partícula para silicatos de cálcio derivados de sol-gel leva à aceleração da reação de pega do cimento endodôntico bioativo produzido.

Physicochemical properties and biological effects of quaternary ammonium methacrylates in an experimental adhesive resin for bonding orthodontic brackets

Abstract Fixed orthodontic appliances may lead to biofilm accumulation around them that may increase caries risk. This study aimed to evaluate the influence of quaternary ammonium methacrylates (QAMs) on the physicochemical properties, cytotoxicity, and antibacterial activity of adhesive resins for orthodontic purposes. Methodology: A base resin was prepared with a comonomer blend and photoinitiator/co-initiator system. Two different QAMs were added to the base adhesive: dimethylaminododecyl methacrylate at 5 wt.% (DMADDM) or dimethylaminohexadecyl methacrylate (DMAHDM) at 10 wt.%. The base adhesive, without QAMs, (GC) and the commercial Transbond™ XT Primer 3M (GT) were used as control. The resins were tested immediately and after six months of aging in the water regarding the antibacterial activity and shear bond strength (SBS). The antibacterial activity was tested against Streptococcus mutans via metabolic activity assay (MTT test). The groups were also tested for the degree of conversion (DC) and cytotoxicity against keratinocytes. Results: The resins containing QAM showed antibacterial activity compared to the commercial material by immediately reducing the metabolic activity by about 60%. However, the antibacterial activity decreased after aging (p<0.05). None of the groups presented any differences for SBS (p>0.05) and DC (p>0.05). The incorporation of DMADDM and DMAHDM significantly reduced the keratinocyte viability compared to the GT and GC groups (p<0.05). Conclusion: Both adhesives with QAMs showed a significant reduction in bacterial metabolic activity, but this effect decreased after water aging. Lower cell viability was observed for the group with the longer alkyl chain-QAM, without significant differences for the bonding ability and degree of conversion. The addition of QAMs in adhesives may affect the keratinocytes viability, and the aging effects maybe decrease the bacterial activity of QAM-doped materials.

Avaliação de soluções antifúngicas de guanidina para resina base de dentadura: um estudo in vitro / Evaluation of guanidine antifungal solutions for denture base resin: an in vitro study

Background: The purposes of this study were: (1) to formulate polyhexamethylene guanidine hydrochloride (PHMGH) solutions at different concentrations; (2) to evaluate their antifungal activity against a mature biofilm of Candida albicans on acrylic resins; (3) to evaluate possible effects on acrylic resins flexural strength and surface roughness. Methods: PHMGH solutions were formulated with distilled water and 0.125, 0.250, or 0.5 wt.% of PHMGH. One group without PHMGH was used as control. For antifungal activity analysis, acrylic resin specimens were contaminated with C. albicans. Specimens were immersed in PHMGH solutions or distilled water for 5 or 10 min. Ultimate flexural strength and surface roughness of acrylic resins were evaluated. Results: All PHMGH solutions at 5 or 10 min showed antifungal activity compared to the control group (p<0.05). The group with 0.5 wt.% of PHMGH showed no countable colonies regardless of the time of contact with the acrylic resins. After 10 min, all PHMGH solutions had antifungal effect without differences from 0.125 to 0.5 wt.% of PHMGH. All groups showed high flexural strength after contact with the solutions compatible with ISO 20795-1:2013 recommendation. The values of surface roughness always remained low, from 0.01 to 0.04 µm for all groups. Conclusion: Within the limitations of this study, it was concluded that the use of a solution composed by distilled water and 0.5 wt.% of PHMGH for 5 min was effective as a disinfectant agent against mature biofilm of C. albicans , maintaining acceptable roughness and flexural strength.

Antecedentes: Os objetivos deste estudo foram: (1) formular soluções de cloridrato de polihexametileno guanidina (PHM-GH) em diferentes concentrações; (2) avaliar sua atividade antifúngica contra biofilme maduro de Candida albicans em resinas acrílicas; (3) avaliar efeitos na resistência à flexão e rugosidade da superfície. Métodos: Soluções de PHMGH foram formuladas com água destilada e 0,125, 0,250 ou 0,5% em peso de PHMGH. Um grupo sem PHMGH foi usado como controle. Para análise da atividade antifúngica, amostras de resina acrílica foram contaminadas com C. albicans, e imersas em soluções de PHMGH ou água destilada por 5 ou 10 min. Resistência à flexão final e rugosidade da superfície foram avaliadas. Resultados: Todas as soluções de PHMGH aos 5 ou 10 minutos apresentaram atividade antifúngica em comparação ao grupo controle (p <0,05). O grupo com 0,5% em peso de PHMGH não mostrou colônias contáveis, independentemente do tempo. Após 10 minutos, todas as soluções de PHMGH tiveram efeito antifúngico sem diferenças de 0,125 a 0,5% em peso de PHM-GH. Os grupos apresentaram alta resistência à flexão após o contato com as soluções compatíveis com a recomendação ISO 20795-1: 2013. Os valores de rugosidade da superfície permaneceram baixos, de 0,01 a 0,04 µm para todos os grupos. Conclusão: Dentro das limitações deste estudo, concluiu-se que o uso de uma solução composta por água destilada e 0,5% em massa de PHMGH por 5 min foi eficaz como agente desinfetante contra o biofilme maduro de C. albicans, mantendo rugosidade e resistência à flexão aceitáveis.

Prolonged caffeine intake decreases alveolar bone damage induced by binge-like ethanol consumption in adolescent female rats.

Ethanol consumption has been reported to negatively impact on periodontal disease. In particular, oral cavity disorders occur upon ethanol exposure during adolescence, a life period associated with particular patterns of short and intense ('binge-like') ethanol consumption that is most deleterious to oral health. The hazardous central effects of ethanol have been linked to the overfunction of adenosine receptors, which are antagonized by caffeine, a bioactive substance present in numerous natural nutrients, which can also modify bone metabolism. The aim of this study was to investigate the effects of caffeine on alveolar bone damage induced by an ethanol binge drinking paradigm during adolescence. Female Wistar rats (35 days old; n = 30) were allocated to six groups: control (vehicle), ethanol (3 g/kg/day; 3 days On-4 days Off challenge), caffeine (10 mg/kg/day), caffeine plus ethanol, SCH58261 (0.1 mg/kg/day, an antagonist of A2A receptors), and SCH58261 plus ethanol. Bone micromorphology and vertical bone loss were analyzed by computed microtomography. Our data showed that ethanol binge drinking reduced alveolar bone quality, with repercussion on alveolar bone size. This ethanol-induced alveolar bone deterioration was abrogated upon treatment with caffeine, but not with SCH58261. This shows that caffeine prevented the periodontal disorder caused by ethanol binge drinking during adolescence, an effect that was not mediated by adenosine A2A receptor blockade.

Development of resin-based bioactive endodontic cements with glycerol salicylate and calcium silicate / Desenvolvimento de cimentos endodônticos bioativos à base de resina com salicilato de glicerol e silicato de cálcio

Introduction: The combination of sol-gel derived calcium silicate particles and glycerol salicylate resins may enhance the pyhisico-chemical properties contribute to the unders-tanding of the interaction between these materials. This study aims to evaluate the physical-chemical properties of resin-based bioactive endodontic cements with glycerol salicylate resins and calcium silicate particles. Materials and methods: Calcium silicate was produced by the sol-gel route, while the resin was produced by mixing 60wt% glycerol salicylate, 30wt% methyl salicylate and 10wt% distilled water. Calcium silicate was added in three different concentrations, 50, 40 and 25% by weight. The cement was tested for setting time, flow, radiopacity and pH. Results: The 50:50 group shows the time of 15min8s while the 75:25 shows the time of 256min13s (p < 0.05). The 50:50 group has a lower flow (15.156mm) compared to 60:40 (23.588 mm) and 75:25 (25.396 mm). All radiopacity values were below 3mmAl. All groups showed a pH increase up to 24 hours and the pH value drop was inversely proportional to the amount of calcium silicate. Discussion: Bioactive calcium silicate particles were used in a composite material with a glycerol salicylate resin. Among the tested cements, the combination of 50wt% calcium silicate particles to 50wt% glycerol salicylate resin showed adequate setting time and promoted an increase in water pH. Conclusion: The 50:50 group showed the setting time and the pH, showing that these materials may be able to promote enhanced biological response. The adjustment of flow and radiopacity should be considered for its clinical application.

Introdução: A combinação entre partículas de silicato de cálcio e glycerol salicilato tem potencial para melhorar as propriedades físico-químicas de cimentos endodônticos bioativos. O objetivo deste estudo foi avaliar as propriedades físico-químicas de cimentos resinosos contendo glicerol salicilato e silicatos de cálcio. Materiais e métodos: O silicato de cálcio foi produzido pelo método sol-gel, en-quanto o líquido foi obtido pela mistura de 60% de salicilato de glicerol, 30% de salicilato de metila e 10% de água destilada em peso. O silicato de cálcio foi adicionado em três diferentes concentrações, sendo elas 50, 40 e 25% em peso. O cimento foi testado em relação ao tempo de presa, escoamento, radiopacidade e pH. Resultados: O grupo 50:50 apresentou tempo de presa de 15min8s enquanto o 75:25 apresentou um tempo de 256min13s (p < 0,05). O grupo 50:50 apresentou menor escoamento (15,156mm) em comparação ao 60:40 (23,588mm) e 75:25 (25,396mm). Quanto à radiopacidade, todos obtiveram valores menores que 3mmAl. Todos apresentaram aumento de pH até 24h, e após esse período tiveram quedas inversamente proporcionais a quantidade de silicato de cálcio em cada um. Discussão: Partículas bioativas de silicato de cálcio foram utilizadas em um compósito com base resi-nosa de glicerol salicilato. Dentre os cimentos utilizados, a combinação de 50:50 entre os componentes tem resultados promissores para a aplicação destes materiais. Conclusão: O grupo 50:50 apresentou adequado tempo de presa e pH, indicando que o material pode manter suas propriedades biológicas. A radiopacidade e o escoamento, no entando, devem ser adequadas para aplicação do material.

Blood Oxidative Stress Modulates Alveolar Bone Loss in Chronically Stressed Rats.

We aimed to investigate the effects of chronic stress (CS) on experimental periodontitis (EP) in rats. For this, 28 Wistar rats were divided into four groups: control, ligature-induced experimental periodontitis (EP), chronic stress (CS; by physical restraint model) and CS+EP (association of chronic stress and ligature-induced periodontitis). The experimental period lasted 30 days, including exposure to CS every day and ligature was performed on the 15th experimental day. After 30 days, the animals were submitted to the behavioral test of the elevated plus maze (EPM). Next, rats were euthanized for blood and mandible collection in order to evaluate the oxidative biochemistry (by nitric oxide (NO), reduced-glutathione activity (GSH), and thiobarbituric acid reactive substance levels (TBARS)) and alveolar bone characterization (by morphometric, micro-CT, and immunohistochemistry), respectively. The behavioral parameters evaluated in EPM indicated higher anxiogenic activity in the CS and CS+EP, groups, which is a behavioral reflex of CS. The results showed that CS was able to change the blood oxidative biochemistry in CS and CS+EP groups, decrease GSH activity in the blood, and increase the NO and TBARS concentrations. Thus, CS induces oxidative blood imbalance, which can potentialize or generate morphological, structural, and metabolic damages to the alveolar bone.

Surface and mechanical properties of adhesives with calcium phosphates challenged to different storage media

Aim: To evaluate the behavior of experimental dental adhesives with hydroxyapatite (HAp), alpha-tricalcium phosphate (α-TCP) or octacalcium phosphate (OCP) after storing them in three different media: dry storage, distilled water, or lactic acid. Methods: An experimental adhesive resin was formulated with bisphenol A glycol dimethacrylate, 2-hydroxyethyl methacrylate, and photoiniciator/co-initiator system. HAp(GHAp), α-TCP (Gα-TCP), or OCP (GOCP) were added to the adhesive resin at 2 wt.%, and one group remained without calcium phosphates to be used as a control (GCtrl). The adhesives were evaluated for surface roughness, scanning electron microscopy (SEM), and ultimate tensile strength (UTS) after storing in distilled water (pH=5.8), lactic acid (pH=4) or dry medium. Results: The initial surface roughness was not different among groups (p>0.05). GHAp showed increased values after immersion in water (p<0.05) or lactic acid (p<0.05). SEM analysis showed a surface variation of the filled adhesives, mainly for Gα-TCP and GHAp. GHApshowed the highest UTS in dry medium (p<0.05), and its value decreased after lactic acid storage (p<0.05). Conclusions: The findings of this study showed that HAp, OCP, and α-TCP affected the physical behavior of the experimental adhesive resins in different ways. HAp was the calcium phosphate that most adversely affected the surface roughness and the mechanical property of the material, mainly when exposed to an acid medium

Brazilian dentistry research productivity: state level socioeconomic, educational and structural factors

Aim: To explore socioeconomic, educational and research factors associated with dental research productivity at the state level in Brazil. Methods: The authors used the Scopus database to identify dental articles published from 2006 to 2016 associated with Brazilian universities at the state level. Several social, economic, educational and research structure variables were obtained from the census and National Research Council to predict the rate of articles per 100 thousand inhabitants among the 27 Brazilian states. Rates were fitted in linear weighted least-squared regression with stepwise technique. Twenty-two variables were grouped in six blocks (social, economic, general education, dental education, research workforce and structure). Results: A total of 21189 articles were published, and the state of São Paulo accounted for 46%, followed by Rio Grande do Sul with 9.4%; four states did not publish any articles. There were an average (± standard deviation) of 2.6 (±1.98) published articles per 100 researchers and 13.4 (±9.6) articles per 100 thousand inhabitants. Research structure and workforce explained 92.4% and 87.2% of state variability, respectively, while the final model explained 94.5%. One extra PhD and one extra undergraduate researcher per 100 thousand inhabitants were associated with 11.3 more and 3.5 fewer articles, respectively, while every 10 points (range 0-100) on the Human Development Index (Education Component) was associated with 3.3 more articles. Conclusion: State scientific output has several associated factors, but research workforce and general education variables seem to be good predictors. Large disparities among state research outputs have been described and must be addressed by research and development policies

Bone healing with niobium-containing bioactive glass composition in rat femur model: A micro-CT study.

OBJECTIVE: The aim of this study is to investigate bone healing ability of niobium-containing bioactive glasses in rat femur model with quantitative and qualitative measurements through x-ray computed microtomography. METHODS: Niobium-containing bioactive powders and scaffolds were produced by sol-gel route (BAGNb). Glasses without niobium addition were produced as well (BAG). Five groups were used: BAGNb powders, BAG powders, BAGNb scaffolds, BAG scaffolds and, as a control group, autogenous bone was used. Materials were implanted in the femur of male rats (Wistar Lineage n=10) and the healing was observed after 15, 30 and 60 days. After the post-operative times, samples were scanned by X-ray microcomputed tomography where morphometric measurements and the mineral density were assessed in image software. RESULTS: No postoperative complications were observed after surgery. BAGNb glasses presented higher mineral deposition, which was observed in the relative volume of bone and the mineral density when compared BAG groups. In these parameters, no statistical difference was found between BAGNb and autogenous bone. The BAGNb powders presented a higher amount of mineralized tissue when compared to BAGNb scaffolds. The analysis of trabecular structure showed lower trabecular formation in synthetic materials when compared to autogenous bone. SIGNIFICANCE: Niobium-containing bioactive glasses promoted bone formation comparable to that of the autogenous bone without compromising the quality of the formed bone.

Effect of immersion in various disinfectant solutions on the properties of a heat-cured acrylic resin / Efeito da imersão em diferentes soluções desinfetantes nas propriedades de uma resina acrílica de termoativação

ABSTRACT Objective: The aim of the present study was to evaluate the influence, of immersion in different disinfectant solutions, on microhardness and surface roughness of a heat-cured acrylic resin. Methods: Specimens were immersed in distilled water, commercial vinegar for domestic use, sodium hypochlorite and hydrogen peroxide, for 150 hours or 300 hours (n=10). After periods of immersion, Knoop microhardness and surface roughness were evaluated using a microhardness tester and a roughness tester, respectively. The data were analyzed using two-way ANOVA and Holm-Sidak, at a level of significance of 5%. Results: The microhardness values ranged from 16.90 ± 0.33 to 17.80 ± 0.51 and roughness values from 0.05 ± 0.01 to 0.08 ± 0.02. There is no difference in microhardness and roughness between groups and times (p>0.05). Conclusion: Within the limitations of this study, it is possible to conclude that vinegar and hydrogen peroxide, as alternative disinfectant solutions for acrylic resin devices, did not promote deleterious effects on microhardness and polishing of a heat-cured acrylic resin used for the fabrication of prostheses, neither in the medium term nor the long term.

RESUMO Objetivo: Avaliar a influência da imersão em diferentes soluções desinfetantes na microdureza e rugosidade de uma resina acrílica de termoativação. Métodos: Corpos de prova de resina acrílica termopolimerizável foram imersos em água destilada, vinagre comercial de uso doméstico, hipoclorito de sódio e peróxido de hidrogênio, por períodos de 150 h ou 300 h (n=10). A microdureza Knoop e a rugosidade superficial dos corpos de prova foram avaliadas com o uso de microduro?metro e rugosímetro, respectivamente. Os dadosforam analisados com o teste análise de variância a dois critérios e Holm-Sidak, com nível de significância de 5%. Resultados: Osvalores de microdureza variaram de 16,90 ± 0,33 a 17,80 ± 0,51 e a rugosidade, de 0,05 ± 0,01a 0,08 ± 0,02. Não houve diferença nos resultados de microdureza e rugosidade entre os grupos e tempos (p>0.05). Conclusão: Dentro das limitações do estudo, é possível concluir que a utilização de vinagre ou de peróxido de hidrogênio, como alternativas para a desinfecção de resina acrílica, não provocam efeitos deletérios na dureza e no polimento da resina acrílica termoativada utilizada para confecção de próteses, nem a médio nem a longo prazo.

Evaluation of an antibacterial orthodontic adhesive incorporated with niobium-based bioglass: an in situ study

Abstract This in situ study aimed to evaluate the antibacterial and anti-demineralization effects of an experimental orthodontic adhesive containing triazine and niobium phosphate bioglass (TAT) around brackets bonded to enamel surfaces. Sixteen volunteers were selected to use intra-oral devices with six metallic brackets bonded to enamel blocks. The experimental orthodontic adhesives were composed by 75% BisGMA and 25% TEGDMA containing 0% TAT and 20% TAT. Transbond XT adhesive (TXT) was used as a control group. Ten volunteers, mean age of 29 years, were included in the study. The six blocks of each volunteer were detached from the appliance after 7 and 14 days to evaluate mineral loss and bacterial growth including total bacteria, total Streptococci, Streptococci mutans, and Lactobacilli. Statistical analysis was performed using GLM model - univariate analysis of variance for microhardness and 2-way ANOVA for bacterial growth (p<0.05). The 20% TAT adhesive caused no difference between distances from bracket and the sound zone at 10-µm deep after 7 and 14 days. After 14 days, higher mineral loss was shown around brackets at 10- to 30-µm deep for TXT and 0% TAT adhesives compared to 20% TAT. S. mutans growth was inhibited by 20% TAT adhesive at 14 days. Adhesive with 20% TAT showed lower S. mutans and total Streptococci growth than 0% TAT and TXT adhesives. The findings of this study show that the adhesive incorporated by triazine and niobium phosphate bioglass had an anti-demineralization effect while inhibiting S. mutans and total Streptococci growth. The use of this product may inhibit mineral loss of enamel, preventing the formation of white spot lesions.

Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride

Abstract The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Performance of progressive and constant tapered instruments rotary systems at canal preparation / Desempenho de sistemas endodônticos rotatórios constante e progressivo no preparo do canal radicular

ABSTRACT Objective: The aim of this study was to compare the performance of two nickel-titanium rotary systems regarding the preparation time, final shape of canal, incidence of aberration, transportation, and fracture of instrument. Methods: A total of 40 simulated canals in resin blocks with 30o curves and a length of 17 mm were divided randomly into two groups: preparation with ProTaper and BioRaCe systems up to F5 and BR5 respectively. Pre- and post-operative canal images were taken and superimposed in order to identify aberrations, transportation, and to take measurements of the canal width. In addition, the preparation time and instrument fractures were recorded. The data were analyzed using Student's t test. Results: There is no difference (p>.05) comparing the systems regarding preparation time, canal aberration, and instrument fracture rates. The progressive tapered instruments of ProTaper prepared significantly larger canal widths in the apical third (p<.05). Conclusion: Overall, both systems provided safe canal preparation, associated with few canal aberrations and instrument fractures.

RESUMO Objetivo: Comparar o desempenho de dois sistemas rotatórios em relação ao tempo de preparo, formato final e alterações do canal, desvio e fratura de instrumento. Métodos: Um total de 40 canais simulados em blocos de resina com curvatura de 30o e comprimento de 17 mm foram divididos randomicamente nos sistemas ProTaper e BioRaCe preparados até F5 e BR5 respectivamente. Imagens pré e após o preparo dos canais foram obtidas e superpostas para identificação de alterações de forma, desvios e largura. O tempo de preparo e fratura de instrumentos também foram avaliados. Os dados foram analisados por teste t de Student. Resultados: O tempo de preparo, alterações de forma e taxa de fratura de instrumentos não teve diferença entre os dois sistemas avaliados (p>0,05). Os instrumentos progressivos do ProTaper resultou em canais significativamente mais largos no terço apical (p<0,05). Conclusão: Os dois sistemas rotatórios avaliados resultaram em preparo endodôntico seguro, com poucas alterações e fratura de instrumento.