pH-Dependence Cytotoxicity Evaluation of Artepillin C against Tumor Cells.

Brazilian green propolis is a well-known product that is consumed globally. Its major component, Artepillin C, showed potential as an antitumor product. This study explored the impact of Artepillin C on fibroblast and glioblastoma cell lines, used as healthy and very aggressive tumor cell lines, respectively. The focus of the study was to evaluate the pH-dependence of Artepillin C cytotoxicity, since tumor cells are known to have a more acidic extracellular microenvironment compared to healthy cells, and Artepillin C was shown to become more lipophilic at lower pH values. Investigations into the pH-dependency of Artepillin C (6.0-7.4), through viability assays and live cell imaging, revealed compelling insights. At pH 6.0, MTT assays showed the pronounced cytotoxic effects of Artepillin C, yielding a notable reduction in cell viability to less than 12% among glioblastoma cells following a 24 h exposure to 100 µM of Artepillin C. Concurrently, LDH assays indicated significant membrane damage, affecting approximately 50% of the total cells under the same conditions. Our Laurdan GP analysis suggests that Artepillin C induces autophagy, and notably, provokes a lipid membrane packing effect, contributing to cell death. These combined results affirm the selective cytotoxicity of Artepillin C within the acidic tumor microenvironment, emphasizing its potential as an effective antitumor agent. Furthermore, our findings suggest that Artepillin C holds promise for potential applications in the realm of anticancer therapies given its pH-dependence cytotoxicity.

Influence of solvents on the morphology of Langmuir and Langmuir-Schaefer films of PCBM and PCBM-based oligomers and polymers.

Fullerene-based polymers and oligomers combined with non-fullerene acceptors show extremely high efficiencies in organic photovoltaic devices. Furthermore, fullerene-based materials are of interest for use in anti-cancer and anti-viral treatments, where their presence can enhance the efficacy of medication considerably. Therefore, it remains important to understand their morphology and electronic properties to improve devices and technological applications. The main goal of this study is to prepare and characterize Langmuir and Langmuir-Schaefer films of PCBM-based materials to investigate the influence of different solvents such as chloroform, toluene, and xylene, and co-components on their morphology. PCBM-based materials were thus studied either alone or in mixtures with a polythiophene derivative (poly(3-hexythiophene), P3HT) commonly used in organic photovoltaic devices. The formation of Langmuir films was studied using surface pressure isotherms and Brewster's angle microscopy (BAM), where the homogeneity, phase behavior, and morphology of the films were investigated. In addition, Langmuir-Schaefer films were characterized by UV-visible absorption spectroscopy, atomic force microscopy (AFM), and Raman spectroscopy, providing information on the morphology of the solid films. This study has shown that it is possible to successfully fabricate Langmuir and Langmuir-Schaefer films of PCBM and PCBM-based oligomers and polymers, both pure and in mixtures with P3HT, to compare their organization, roughness, and optical properties. With the Langmuir films, it was possible to estimate the area of the molecules and visualize their aggregation through BAM images, establishing a relationship between the area occupied by these materials and the solvent used. All characterization techniques corroborate that the use of chloroform significantly reduced the roughness of the LS films mixed with P3HT and also presented a higher ordering compared to films prepared with xylene solutions.

Correlating Artepillin C cytotoxic activity on HEp-2 cells with bioinspired systems of plasma membranes.

Artepillin C is the main compound present in propolis from Baccharis dracunculifolia, whose antitumor activity has been the focus of many studies. Herein, we shall investigate the Artepillin C mechanisms of action against cells derived from the oropharyngeal carcinoma (HEp-2). Cytotoxicity tests revealed that the concentrations of Artepillin C required to reduce cell viability by 50% (CC50) are dependent on the incubation time, decreasing from 40.7 × 10-5 mol/L to 15.7 × 10-5 mol/L and 9.05 × 10-5 mol/L considering 12, 24 and 48 h, respectively. Hydrophobic interactions on neutral species of Artepillin C induce aggregation over the HEp-2 plasma membrane, given the acid conditions of the cellular culture. Indeed, Langmuir monolayers mimicking cellular membranes of tumor cells revealed Artepillin C affinity to interact with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) containing 20 mol% of 1,2-dipalmitoyl-sn-glychero-3-phosphoserine (DPPS), leading aggregation on giant unilamellar vesicles (GUVs) at pH 3.2. Moreover, leakage experiments on GUVs have shown that the presence of DPPS enhances the efflux of the fluorescent probe signaling the membrane permeabilization, which is the origin of the necrotic pathway triggered in HEp-2 cells, as observed by flow cytometry assays.

Vibrational Spectroscopic Characterization and Coherent Anti-Stokes Raman Spectroscopy (CARS) Imaging of Artepillin C.

In the following work, the vibrational spectroscopic characteristics of artepillin C are reported by means of Fourier transform infrared (FT-IR) and Raman spectroscopies, surface-enhanced Raman scattering (SERS), and coherent anti-Stokes Raman scattering (CARS) microscopy. Artepillin C is an interesting compound due to its pharmacological properties, including antitumor activity. It is found as the major component of Brazilian green propolis, a resinous mixture produced by bees to protect their hives against intruders. Vibrational spectroscopic techniques have shown a strong peak at 1599 cm-1, assigned to C=C stretching vibrations from the aromatic ring of artepillin C. From these data, direct visualization of artepillin C could be assessed by means of CARS microscopy, showing differences in the film hydration obtained for its neutral and deprotonated states. Raman-based methods show potential to visualize the uptake and action of artepillin C in biological systems, triggering its interaction with biological systems that are needed to understand its mechanism of action.

Disruption of giant unilamellar vesicles mimicking cell membranes induced by the pesticides glyphosate and picloram.

Giant unilamellar vesicles (GUVs) have been one of the most extensively investigated membrane model to study cell membrane-ligand interactions. In this study, we investigated the interaction between glyphosate and picloram with GUVs made with sphingomyelin (SM), cholesterol (CHOL), and dioleoyl-sn-glycerol-3-phosphocholine (DOPC) (DOPC/SM (1:1), DOPC/CHOL/SM (1:1:1)) in a physiological environment using confocal and phase contrast microscopy. At high pesticide concentrations (70 to 90 µM), we generally found the GUVs undergoing a physical such as contouring, elongation, and eventually lose their characteristic spherical shape. In addition, to determine the comparative effect of the pesticides, control experiments were performed using GUVs made with only DOPC and DOPC/SM 1:1. The results show that, at low concentration (0.5 µM), a significant effect was observed during a 30 min incubation time. These findings also suggest that cholesterol may play a significant role in the permeability of the vesicle against the action of the pesticides, which have important biological implications on the lipid composition of the membrane.

Supramolecular Arrangement of Iron Phthalocyanine in Langmuir-Schaefer and Electrodeposited Thin Films.

The supramolecular arrangement in thin film technology has been explored through different deposition techniques aiming to control the film properties at the molecular level. We report on the formation of iron phthalocyanine (FePc) films using both Langmuir-Schaefer (LS) and electrodeposition methods. The multilayer formation was monitored with ultraviolet-visible absorption spectroscopy (UV-vis) and electrochemical measurements. According to Raman spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM), the surface morphology of electrodeposited films is more homogeneous than LS films at micro and nanometer scales. From FTIR spectroscopy, the FePc molecules in the electrodeposited films are oriented preferentially with the macrocycle parallel to the substrate surface (flat-on), while a slight tilt is suggested in LS films, being both films crystalline. Therefore, the use of different deposition techniques allowed the fabrication of thin films from FePc with distinct supramolecular arrangements, leading to distinct electrochemical properties. For instance, the electrodeposited films show higher surface coverage, suggesting a more compact structure, which favors the charge transfer and smaller energy gap. The possibility of tuning some properties according to deposition technique for the same material can help the development of technological applications such as electronic or sensing devices.

New trends in plasmonic (bio)sensing

Abstract The strong enhancement and localization of electromagnetic field in plasmonic systems have found applications in many areas, which include sensing and biosensing. In this paper, an overview will be provided of the use of plasmonic phenomena in sensors and biosensors with emphasis on two main topics. The first is related to possible ways to enhance the performance of sensors and biosensors based on surface plasmon resonance (SPR), where examples are given of functionalized magnetic nanoparticles, magnetoplasmonic effects and use of metamaterials for SPR sensing. The other topic is focused on surface-enhanced Raman scattering (SERS) for sensing, for which uniform, flexible, and reproducible SERS substrates have been produced. With such recent developments, there is the prospect of improving sensitivity and lowering the limit of detection in order to overcome the limitations inherent in ultrasensitive detection of chemical and biological analytes, especially at single molecule levels.

Sensitive detection of estriol hormone in creek water using a sensor platform based on carbon black and silver nanoparticles.

We report the electrochemical detection of estriol using carbon black nanoballs (CNB) decorated with silver nanoparticles (AgNP) as electrode material. Homogeneous, porous films on glassy carbon electrodes (GCE) were obtained, with diameters of 20 - 25nm for CNB and 5 - 6nm for AgNP. CNB/AgNP electrodes had increased conductivity and electroactive area in comparison with bare GCE and GCE/CNB, according to cyclic voltammetry and electrochemical impedance spectroscopy. The oxidation potential peak was also down shifted by 93mV, compared to the bare GC electrode. Differential pulse voltammetry data were obtained in 0.1molL-1 PBS (pH 7.0) to detect estriol without the purification step, in the linear range between 0.2 and 3.0µmolL-1 with detection and quantification limits of 0.16 and 0.5µmolL-1 (0.04 and 0.16mgL-1), respectively. The sensor was used to detect estriol in a creek water sample with the same performance as in the official methodology based on high performance liquid chromatography.

Large-area plasmonic substrate of silver-coated iron oxide nanorod arrays for plasmon-enhanced spectroscopy.

One-dimensional iron oxide materials fabricated on conducting glass substrates and their unique properties make these nanostructures promising candidates for a wide range of applications. Herein, vertically oriented α-Fe2O3 nanorod arrays synthesized under hydrothermal conditions over a large area are described, as an active platform for surface-enhanced resonance Raman scattering (SERRS) and surface-enhanced fluorescence (SEF). From scanning electron microscopy images the formation of a homogeneous distribution of vertically oriented rods in a large area is confirmed. For activating the localized surface plasmon resonances, which are responsible for SERRS and SEF, a 6 nm layer of Ag is deposited onto the α-Fe2O3 nanorod arrays by physical vapor deposition to form Ag islands.

Subcutaneous tissue reaction and cytotoxicity of polyvinylidene fluoride and polyvinylidene fluoride-trifluoroethylene blends associated with natural polymers.

Cytotoxicity and subcutaneous tissue reaction of innovative blends composed by polyvinylidene fluoride and polyvinylidene fluoride-trifluoroethylene associated with natural polymers (natural rubber and native starch) forming membranes were evaluated, aiming its applications associated with bone regeneration. Cytotoxicity was evaluated in mouse fibroblasts culture cells (NIH3T3) using trypan blue staining. Tissue response was in vivo evaluated by subcutaneous implantation of materials in rats, taking into account the presence of necrosis and connective tissue capsule around implanted materials after 7, 14, 21, 28, 35, 60, and 100 days of surgery. The pattern of inflammation was evaluated by histomorphometry of the inflammatory cells. Chemical and morphological changes of implanted materials after 60 and 100 days were evaluated by Fourier transform infrared (FTIR) absorption spectroscopy and scanning electron microscopy (SEM) images. Cytotoxicity tests indicated a good tolerance of the cells to the biomaterial. The in vivo tissue response of all studied materials showed normal inflammatory pattern, characterized by a reduction of polymorphonuclear leukocytes and an increase in mononuclear leukocytes over the time (p < 0.05 Kruskal-Wallis). On day 60, microscopic analysis showed regression of the chronic inflammatory process around all materials. FTIR showed no changes in chemical composition of materials due to implantation, whereas SEM demonstrated the delivery of starch in the medium. Therefore, the results of the tests performed in vitro and in vivo show that the innovative blends can further be used as biomaterials.

Fast dynamics in the optical storage with Langmuir-Blodgett films of a diazocrown ether molecule.

Azobenzene-containing molecules have been studied for a number of applications exploiting the efficient trans-cis-trans photoisomerization cycles, which lead to molecular alignment and even micrometer-scale mass transport. One of the limitations of these materials, though, is the slow dynamics of the alignment process that requires significant molecular rearrangement. In this paper, we report on Langmuir-Blodgett (LB) films of a derivative of azocrown ether, referred to as 29-membered diazocrown ether, specially synthesized for the photoisomerization to involve only distortion of the shape of the crown. As a result, the dynamics of the writing process was extremely fast, with maximum birefringence being reached within less than 1 s, to be contrasted with tens or even hundreds of seconds for other azobenzene materials. A disadvantage is this strategy, however, is that the resulting birefringence was low, of the order of 10(-3), because the closely packed arrangement prevented the whole diazocrown molecule to be fully reoriented. From a comparison with results obtained in guest-host, cast films where the 29-membered diazocrown ether was incorporated into a polystyrene matrix, we confirmed that both fast dynamics and small birefringence features are due to a combination of effects from the nanostructured nature of the LB films and the molecular structure of the specially-designed diazocrown ether. Significantly, the fast dynamics opens the way for various applications, as in command surfaces for liquid crystal devices.