Design of Multicomponent Peptide Fibrils with Ordered and Programmable Compositional Patterns.

Advanced applications of biomacromolecular assemblies require a stringent degree of control over molecular arrangement, which is a challenge to current synthetic methods. Here we used a neighbor-controlled patterning strategy to build multicomponent peptide fibrils with an unprecedented capacity to manipulate local composition and peptide positions. Eight peptides were designed to have regulable nearest neighbors upon co-assembly, which, by simulation, afforded 412 different patterns within fibrils, with varied compositions and/or peptide positions. The fibrils with six prescribed patterns were experimentally constructed with high accuracy. The controlled patterning also applies to functionalities appended to the peptides, as exemplified by arranging carbohydrate ligands at nanoscale precision for protein recognition. This study offers a route to molecular editing of inner structures of peptide assemblies, prefiguring the uniqueness and richness of patterning-based material design.

Phenol-soluble modulins PSMα3 and PSMß2 form nanotubes that are cross-α amyloids.

Phenol-soluble modulins (PSMs) are peptide-based virulence factors that play significant roles in the pathogenesis of staphylococcal strains in community-associated and hospital-associated infections. In addition to cytotoxicity, PSMs display the propensity to self-assemble into fibrillar species, which may be mediated through the formation of amphipathic conformations. Here, we analyze the self-assembly behavior of two PSMs, PSMα3 and PSMß2, which are derived from peptides expressed by methicillin-resistant Staphylococcus aureus (MRSA), a significant human pathogen. In both cases, we observed the formation of a mixture of self-assembled species including twisted filaments, helical ribbons, and nanotubes, which can reversibly interconvert in vitro. Cryo­electron microscopy structural analysis of three PSM nanotubes, two derived from PSMα3 and one from PSMß2, revealed that the assemblies displayed remarkably similar structures based on lateral association of cross-α amyloid protofilaments. The amphipathic helical conformations of PSMα3 and PSMß2 enforced a bilayer arrangement within the protofilaments that defined the structures of the respective PSMα3 and PSMß2 nanotubes. We demonstrate that, similar to amyloids based on cross-ß protofilaments, cross-α amyloids derived from these PSMs display polymorphism, not only in terms of the global morphology (e.g., twisted filament, helical ribbon, and nanotube) but also with respect to the number of protofilaments within a given peptide assembly. These results suggest that the folding landscape of PSM derivatives may be more complex than originally anticipated and that the assemblies are able to sample a wide range of supramolecular structural space.

Shape-Shifting Peptide Nanomaterials: Surface Asymmetry Enables pH-Dependent Formation and Interconversion of Collagen Tubes and Sheets.

The fabrication of dynamic, transformable biomaterials that respond to environmental cues represents a significant step forward in the development of synthetic materials that rival their highly functional, natural counterparts. Here, we describe the design and synthesis of crystalline supramolecular architectures from charge-complementary heteromeric pairs of collagen-mimetic peptides (CMPs). Under appropriate conditions, CMP pairs spontaneously assemble into either 1D ultraporous (pore diameter >100 nm) tubes or 2D bilayer nanosheets due to the structural asymmetry that arises from heteromeric self-association. Crystalline collagen tubes represent a heretofore unobserved morphology of this common biomaterial. In-depth structural characterization from a suite of biophysical methods, including TEM, AFM, high-resolution cryo-EM, and SAXS/WAXS measurements, reveals that the sheet and tube assemblies possess a similar underlying lattice structure. The experimental evidence suggests that the tubular structures are a consequence of the self-scrolling of incipient 2D layers of collagen triple helices and that the scrolling direction determines the formation of two distinct structural isoforms. Furthermore, we show that nanosheets and tubes can spontaneously interconvert through manipulation of the assembly pH and systematic adjustment of the CMP sequence. Altogether, we establish initial guidelines for the construction of dynamically responsive 1D and 2D assemblies that undergo a structurally programmed morphological transition.

Ambidextrous helical nanotubes from self-assembly of designed helical hairpin motifs.

Tandem repeat proteins exhibit native designability and represent potentially useful scaffolds for the construction of synthetic biomimetic assemblies. We have designed 2 synthetic peptides, HEAT_R1 and LRV_M3Δ1, based on the consensus sequences of single repeats of thermophilic HEAT (PBS_HEAT) and Leucine-Rich Variant (LRV) structural motifs, respectively. Self-assembly of the peptides afforded high-aspect ratio helical nanotubes. Cryo-electron microscopy with direct electron detection was employed to analyze the structures of the solvated filaments. The 3D reconstructions from the cryo-EM maps led to atomic models for the HEAT_R1 and LRV_M3Δ1 filaments at resolutions of 6.0 and 4.4 Å, respectively. Surprisingly, despite sequence similarity at the lateral packing interface, HEAT_R1 and LRV_M3Δ1 filaments adopt the opposite helical hand and differ significantly in helical geometry, while retaining a local conformation similar to previously characterized repeat proteins of the same class. The differences in the 2 filaments could be rationalized on the basis of differences in cohesive interactions at the lateral and axial interfaces. These structural data reinforce previous observations regarding the structural plasticity of helical protein assemblies and the need for high-resolution structural analysis. Despite these observations, the native designability of tandem repeat proteins offers the opportunity to engineer novel helical nanotubes. Moreover, the resultant nanotubes have independently addressable and chemically distinguishable interior and exterior surfaces that would facilitate applications in selective recognition, transport, and release.

Programmable Fabrication of Multilayer Collagen Nanosheets of Defined Composition.

Two-dimensional nanostructures offer significant promise as components for the construction of functional biomaterials. However, the controllable fabrication of these structures remains a challenge. Ideally, one desires to control the composition, structure, and surface functionality of the resultant materials with precision, in order to tailor properties for a particular application and minimize the unintended side effects. We recently reported the synthesis of triple-layer nanosheets from template-driven assembly of a negatively charged collagen-mimetic peptide CP - on a preassembled nanosheet of a positively charged collagen-mimetic peptide CP + [1]. This process enabled the fabrication of nanosheets of defined composition, internal structure, and surface chemistry using a modified layer-by-layer approach. Herein, we describe the synthesis and purification procedures for these two 45-mer peptides, CP + and CP - , and guidelines for the directed assembly of triple-layer structures, along with routine methods of structural analysis.

Structurally Ordered Nanowire Formation from Co-Assembly of DNA Origami and Collagen-Mimetic Peptides.

We describe the co-assembly of two different building units: collagen-mimetic peptides and DNA origami. Two peptides CP++ and sCP++ are designed with a sequence comprising a central block (Pro-Hyp-Gly) and two positively charged domains (Pro-Arg-Gly) at both N- and C-termini. Co-assembly of peptides and DNA origami two-layer (TL) nanosheets affords the formation of one-dimensional nanowires with repeating periodicity of ∼10 nm. Structural analyses suggest a face-to-face stacking of DNA nanosheets with peptides aligned perpendicularly to the sheet surfaces. We demonstrate the potential of selective peptide-DNA association between face-to-face and edge-to-edge packing by tailoring the size of DNA nanostructures. This study presents an attractive strategy to create hybrid biomolecular assemblies from peptide- and DNA-based building blocks that takes advantage of the intrinsic chemical and physical properties of the respective components to encode structural and, potentially, functional complexity within readily accessible biomimetic materials.

A Supramolecular Vaccine Platform Based on α-Helical Peptide Nanofibers.

A supramolecular peptide vaccine system was designed in which epitope-bearing peptides self-assemble into elongated nanofibers composed almost entirely of alpha-helical structure. The nanofibers were readily internalized by antigen presenting cells and produced robust antibody, CD4+ T-cell, and CD8+ T-cell responses without supplemental adjuvants in mice. Epitopes studied included a cancer B-cell epitope from the epidermal growth factor receptor class III variant (EGFRvIII), the universal CD4+ T-cell epitope PADRE, and the model CD8+ T-cell epitope SIINFEKL, each of which could be incorporated into supramolecular multi-epitope nanofibers in a modular fashion.

Self-Assembly of an α-Helical Peptide into a Crystalline Two-Dimensional Nanoporous Framework.

Sequence-specific peptides have been demonstrated to self-assemble into structurally defined nanoscale objects including nanofibers, nanotubes, and nanosheets. The latter structures display significant promise for the construction of hybrid materials for functional devices due to their extended planar geometry. Realization of this objective necessitates the ability to control the structural features of the resultant assemblies through the peptide sequence. The design of a amphiphilic peptide, 3FD-IL, is described that comprises two repeats of a canonical 18 amino acid sequence associated with straight α-helical structures. Peptide 3FD-IL displays 3-fold screw symmetry in a helical conformation and self-assembles into nanosheets based on hexagonal packing of helices. Biophysical evidence from TEM, cryo-TEM, SAXS, AFM, and STEM measurements on the 3FD-IL nanosheets support a structural model based on a honeycomb lattice, in which the length of the peptide determines the thickness of the nanosheet and the packing of helices defines the presence of nanoscale channels that permeate the sheet. The honeycomb structure can be rationalized on the basis of geometrical packing frustration in which the channels occupy defect sites that define a periodic superlattice. The resultant 2D materials may have potential as materials for nanoscale transport and controlled release applications.

Rational Design of Multilayer Collagen Nanosheets with Compositional and Structural Control.

Two collagen-mimetic peptides, CP(+) and CP(-), are reported in which the sequences comprise a multiblock architecture having positively charged N-terminal (Pro-Arg-Gly)3 and negatively charged C-terminal (Glu-Hyp-Gly)3 triad extensions, respectively. CP(+) rapidly self-associates into positively charged nanosheets based on a monolayer structure. In contrast, CP(-) self-assembles to form negatively charged monolayer nanosheets at a much slower rate, which can be accelerated in the presence of calcium(II) ion. A 2:1 mixture of unassociated CP(-) peptide with preformed CP(+) nanosheets generates structurally defined triple-layer nanosheets in which two CP(-) monolayers have formed on the identical surfaces of the CP(+) nanosheet template. Experimental data from electrostatic force microscopy (EFM) image analysis, zeta potential measurements, and charged nanoparticle binding assays support a negative surface charge state for the triple-layer nanosheets, which is the reverse of the positive surface charge state observed for the CP(+) monolayer nanosheets. The electrostatic complementarity between the CP(+) and CP(-) triple helical cohesive ends at the layer interfaces promotes a (CP(-)/CP(+)/CP(-)) compositional gradient along the z-direction of the nanosheet. This structurally informed approach represents an attractive strategy for the fabrication of two-dimensional nanostructures with compositional control.

Structurally homogeneous nanosheets from self-assembly of a collagen-mimetic peptide.

A collagen-mimetic peptide, NSIII, has been designed with three sequential blocks having positive, neutral, and negative charges, respectively. The non-canonical imino acid, (2S,4S)-4-aminoproline (amp), was used to specify the positive charges at the Xaa positions of (Xaa-Yaa-Gly) triads in the N-terminal domain of NSIII. Peptide NSIII underwent self-assembly from aqueous solution to form a highly homogeneous population of nanosheets. Two-dimensional crystalline sheets formed in which the length of the peptide defined the height of the sheets. These results contrasted with prior results on a similar multi-domain collagen-mimetic polypeptides in which the sheets had highly polydisperse distribution of sizes in the (x/y)- and (z)-dimensions. The structural differences between the two nanosheet assemblies were interpreted in terms of the relative stereoelectronic effects of the different aminoproline derivatives on the local triple helical conformation of the peptides.

Structurally defined nanoscale sheets from self-assembly of collagen-mimetic peptides.

We report the design of two collagen-mimetic peptide sequences, NSI and NSII, that self-assemble into structurally defined nanoscale sheets. The underlying structure of these nanosheets can be understood in terms of the layered packing of collagen triple helices in two dimensions. These nanosheet assemblies represent a novel morphology for collagen-based materials, which, on the basis of their defined structure, may be envisioned as potentially biocompatible platforms for controlled presentation of chemical functionality at the nanoscale. The molecularly programmed self-assembly of peptides NSI and NSII into nanosheets suggests that sequence-specific macromolecules offer significant promise as design elements for two-dimensional (2D) assemblies. This investigation provides a design rubric for fabrication of structurally defined, peptide-based nanosheets using the principles of solution-based self-assembly facilitated through complementary electrostatic interactions.

Rational design of helical nanotubes from self-assembly of coiled-coil lock washers.

Design of a structurally defined helical assembly is described that involves recoding of the amino acid sequence of peptide GCN4-pAA. In solution and the crystalline state, GCN4-pAA adopts a 7-helix bundle structure that resembles a supramolecular lock washer. Structurally informed mutagenesis of the sequence of GCN4-pAA afforded peptide 7HSAP1, which undergoes self-association into a nanotube via noncovalent interactions between complementary interfaces of the coiled-coil lock-washer structures. Biophysical measurements conducted in solution and the solid state over multiple length scales of structural hierarchy are consistent with self-assembly of nanotube structures derived from 7-helix bundle subunits. The dimensions of the supramolecular assemblies are similar to those observed in the crystal structure of GCN4-pAA. Fluorescence studies of the interaction of 7HSAP1 with the solvatochromic fluorophore PRODAN indicated that the nanotubes could encapsulate shape-appropriate small molecules with high binding affinity.

Controlling self-assembly of a peptide-based material via metal-ion induced registry shift.

Peptide TZ1C2 can populate two distinct orientations: a staggered (out-of-register) fibril and an aligned (in-register) coiled-coil trimer. The coordination of two cadmium ions induces a registry shift that results in a reversible transition between these structural forms. This process recapitulates the self-assembly mechanism of native protein fibrils in which a ligand binding event gates a reversible conformational transition between alternate forms of a folded peptide structure.

Multiple site-selective insertions of noncanonical amino acids into sequence-repetitive polypeptides.

A simple and efficient method is described for the introduction of noncanonical amino acids at multiple, defined sites within recombinant polypeptide sequences. Escherichia coli MRA30, a bacterial host strain with attenuated activity of release factor 1 (RF1), was assessed for its ability to support incorporation of a diverse range of noncanonical amino acids in response to multiple encoded amber (TAG) codons within genes derived from superfolder GFP and an elastin-mimetic protein polymer. Suppression efficiency and protein yield depended on the identity of the orthogonal aminoacyl-tRNA synthetase/tRNA(CUA) pair and the noncanonical amino acid. Elastin-mimetic protein polymers were prepared in which noncanonical amino acid derivatives were incorporated at up to 22 specific sites within the polypeptide sequence with high substitution efficiency. The identities and positions of the variant residues were confirmed by mass spectrometric analysis of the full-length polypeptides and proteolytic cleavage fragments from thermolysin digestion. The data suggest that this multisite suppression approach permits the preparation of protein-based materials in which novel chemical functionalities can be introduced at precisely defined positions within the polypeptide sequence.

Engineering responsive mechanisms to control the assembly of peptide-based nanostructures.

Complex biological machines arise from self-assembly on the basis of structural features programmed into sequence-specific macromolecules (i.e. polypeptides and polynucleotides) at the molecular level. As a consequence of the near-absolute control of macromolecular architecture that results from such sequence specificity, biological structural platforms may have advantages for the creation of functional supramolecular assemblies in comparison with synthetic polymers. Thus biological structural motifs present an attractive target for the synthesis of artificial nanoscale systems on the basis of relationships between sequence and supramolecular structure that have been established for native biological assemblies. In the present review, we describe an approach to the creation of structurally defined supramolecular assemblies derived from synthetic alpha-helical coiled-coil structural motifs. Two distinct challenges are encountered in this approach to materials design: the ability to recode the canonical sequences of native coiled-coil structural motifs to accommodate the formation of structurally defined supramolecular assemblies (e.g. synthetic helical fibrils) and the development of methods to control supramolecular self-assembly of these peptide-based materials under defined conditions that would be amenable to conventional processing methods. In the present review, we focus on the development of mechanisms based on guest-host recognition to control fibril assembly/disassembly. This strategy utilizes the latent structural specificity encoded within sequence-defined peptides to couple a conformational transition within the coiled-coil motifs to incremental changes in environmental conditions. The example of a selective metal-ion-induced conformational switch will be employed to validate the design principles.

Elastin-mimetic protein polymers capable of physical and chemical crosslinking.

We report the synthesis of a new class of recombinant elastin-mimetic triblock copolymer capable of both physical and chemical crosslinking. These investigations were motivated by a desire to capture features unique to both physical and chemical crosslinking schemes so as to exert optimal control over a wide range of potential properties afforded by protein-based multiblock materials. We postulated that by chemically locking a multiblock protein assembly in place, functional responses that are linked to specific domain structures and morphologies may be preserved over a broader range of loading conditions that would otherwise disrupt microphase structure solely stabilized by physical crosslinking. Specifically, elastic modulus was enhanced and creep strain reduced through the addition of chemical crosslinking sites. Additionally, we have demonstrated excellent in vivo biocompatibility of glutaraldehyde treated multiblock systems.

Deformation responses of a physically cross-linked high molecular weight elastin-like protein polymer.

Recombinant protein polymers were synthesized and examined under various loading conditions to assess the mechanical stability and deformation responses of physically cross-linked, hydrated, protein polymer networks designed as triblock copolymers with central elastomeric and flanking plastic-like blocks. Uniaxial stress-strain properties, creep and stress relaxation behavior, as well as the effect of various mechanical preconditioning protocols on these responses were characterized. Significantly, we demonstrate for the first time that ABA triblock protein copolymers when redesigned with substantially larger endblock segments can withstand significantly greater loads. Furthermore, the presence of three distinct phases of deformation behavior was revealed upon subjecting physically cross-linked protein networks to step and cyclic loading protocols in which the magnitude of the imposed stress was incrementally increased over time. We speculate that these phases correspond to the stretch of polypeptide bonds, the conformational changes of polypeptide chains, and the disruption of physical cross-links. The capacity to select a genetically engineered protein polymer that is suitable for its intended application requires an appreciation of its viscoelastic characteristics and the capacity of both molecular structure and conditioning protocols to influence these properties.

Design of a selective metal ion switch for self-assembly of peptide-based fibrils.

The self-assembling peptide TZ1H, a structural variant of the trimeric isoleucine zipper GCN4-pII, contains histidine residues at core d-positions of alternate heptads that define three trigonal coordination sites within the coiled-coil trimer. Circular dichroism spectropolarimetry indicated that peptide TZ1H undergoes a random coil to alpha-helical conformational change upon binding of 1 equiv of silver(I) ion, but not zinc(II), copper(II), or nickel(II) ions. Isothermal titration calorimetry provided evidence for a single binding-site model in which each peptide contributes one net silver(I) coordination site, in agreement with the proposed structural model. Transmission electron microscopy revealed that TZ1H self-assembles into long aspect ratio helical fibers in the presence of silver(I) ion. These results demonstrate that the rational design of selective metal ion binding sites within de novo designed peptides represents a promising approach to the controlled fabrication of nanoscale, self-assembled materials.

D-periodic collagen-mimetic microfibers.

Self-assembling peptides have been previously designed that assemble into macroscopic membranes, nanotapes, and filaments through electrostatic interactions. However, the formation of highly ordered collagen-like fibrils, which display D-periodic features, has yet to be achieved. In this report, we describe for the first time a synthetic peptide system that self-assembles into a fibrous structure with well-defined periodicity that can be visualized by transmission electron microscopy (TEM). Specifically, we designed and synthesized a peptide that utilizes charged amino acids within the ubiquitous Xaa-Yaa-Gly triad sequence to bias the self-assembly into collagen-like homotrimeric helices that are capable of fibrillogenesis with the production of D-periodic microfibers. Potential molecular mechanisms for peptide assembly into triple-helical protomers and their subsequent organization into structurally defined, linear assemblies were explored through molecular dynamics (MD) simulations. The formation of thermodynamically stable complexes was attributed to the presence of strong electrostatic and hydrogen bond interactions at staggered positions along the linear assembly. This unexpected mimicry of native collagen structure using a relatively simple oligopeptide sequence establishes new opportunities for engineering linear assemblies with highly ordered nano- and microscale periodic features. In turn, the capacity to precisely design periodic elements into an assembly that faithfully reproduces these features over large length scales may facilitate the fabrication of ordered two- and three-dimensional fiber networks containing oriented biologically, chemically, or optically active elements.