Pomegranate extract on eroded dentin: antioxidant action, bond strength and morphology of the adhesive interface after aging.

Objectives: This study aimed to evaluate the effect of pomegranate solution (Punica granatum) on eroded dentin through antioxidant action, shear bond strength (SBS) and interface morphology. Materials and Methods: The 10% pomegranate peel extract was prepared by the lyophilization method. Punicalagin polyphenol was confirmed by high-performance liquid chromatography. Antioxidant activity was evaluated by capturing the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical. For the SBS, 48 dentin fragments were divided into sound or eroded, and subdivided according to the pretreatment (n = 12): water or P. granatum. The surfaces were restored with self-etch adhesive and a bulk-fill resin (Ecosite; DMG). The SBS was done immediately (24 hours) and after thermal cycling + water storage (12 months). For scanning electron microscopy, 48 dentin fragments (24 sound and 24 eroded) received the same treatments as for SBS (n = 6), and they were analyzed after 24 hours and 12 months. Results: The P. granatum had antioxidant action similar (p = 0.246) to the phenolic standard antioxidants. After 24 hours, eroded dentin had lower SBS than sound dentin (p < 0.001), regardless of the pretreatment. After 12 months, P. granatum maintained the SBS of sound dentin (13.46 ± 3.42 MPa) and eroded dentin (10.96 ± 1.90 MPa) statistically similar. The lowest values were found on eroded dentin treated with water (5.75 ± 1.65 MPa) (p < 0.001). P. granatum on eroded dentin caused peritubular demineralization and hybrid layer with resin tags. Conclusions: The pomegranate extract had antioxidant action and preserved the adhesive interface of the eroded dentin.

Influence of Intravascular Laser Irradiation of Blood (ILIB) on inflammatory cytokines and nitric oxide in vivo: a systematic review.

The use of Intravascular Laser Irradiation of Blood (ILIB) as a treatment or adjunct tool has been used around the world since the 1980s. So that more professionals can deliver benefits to their patients in different areas of health, it is necessary to understand in depth the mechanisms of laser action at the molecular level, for correct indication and success in the treatment. To analyze works that evaluated the influence of ILIB on inflammatory cytokines and nitric oxide (NO) in animals and humans. The literature search was carried out between February and April 2023 in Pubmed, Medline, Web of Science, SciELO, Lilacs database. The risk of bias was assessed using the bias table where the authors performed the analyzes of all articles with the risk of bias domains. The methodology was defined following the PRISMA guidelines (Preferred Systematic Reviews and MetaAnalysis Report). The search retrieved 135 possibly relevant articles. After removing duplicates, according to the eligibility criteria, evaluation of titles and review of abstracts, in the end, 6 articles were included. An increase in anti-inflammatory cytokines, a decrease in pro-inflammatory cytokines and an increase in NO can be observed. The wavelengths used ranged from 660 to 808 nm when using a low intensity laser and when using a VIP light source 480-3400 nm, they also differed in terms of the light emission pattern. ILIB may be a complementary treatment option for patients who have comorbidities that lead to systemic inflammation.

Er:YAG laser in selective caries removal and dentin treatment with chitosan: a randomized clinical trial in primary molars.

This study evaluated the effect of chitosan on dentin treatment after selective removal of caries lesions with Er:YAG laser in reducing Streptococcus mutans, as well as its effect on the performed restorations. The sample consisted of children (aged 7 to 9 years) with active carious lesions and dentin cavitation located on the occlusal surface of deciduous molars. Eighty teeth were randomly distributed into 4 groups according to the caries removal method: Er:YAG laser (250 mJ/4 Hz) or bur and dentin surface treatment: 2.5% chitosan solution or distilled water. The bacterial load of caries-affected dentin was quantified by counting CFU/mg (n = 10). The teeth were restored and evaluated at 7 days, 6 months, and 12 months using modified USPHS criteria (n = 20). Microbiological data was analyzed by Mann-Whitney and clinical analyses were done using Kruskal-Wallis and Dunn test (α = 0.05). The results showed that the Er:YAG laser significantly reduced the amount of Streptococcus mutans (p = 0.0068). After dentin treatment with chitosan, there was a significant reduction in the amount of Streptococcus mutans for both removal methods (p = 0.0424). For the retention and secondary caries criteria, no significant differences were observed along the evaluated time (p > 0.05). The laser-treated group was rated "bravo" for discoloration (p = 0.0089) and marginal adaptation (p = 0.0003) after 6 and 12 months compared to baseline. The Er:YAG laser reduced the amount of Streptococcus mutans and the chitosan showed an additional antibacterial effect. After 1 year, the Er:YAG laser-prepared teeth, regardless of the dentin treatment, showed greater discoloration and marginal adaptation of the restorations.

Patients´ satisfaction concerning direct anterior dental restoration

Abstract The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Resumo O objetivo deste estudo foi observar a satisfação dos pacientes com suas restaurações dentárias anteriores diretas e compará-las com a avaliação clínica do dentista usando os critérios FDI (Federation Dental International). Os pacientes pontuaram suas restaurações dentárias (n=106) anteriores em relação à satisfação (satisfatória / insatisfatória). Quando insatisfatória, ele foi entrevistado sobre a queixa. Na mesma sessão, as restaurações dentárias foram avaliadas clinicamente por dois dentistas utilizando os critérios FDI (escore 1-5) quanto aos aspectos estéticos, funcionais e biológicos. Estatística descritiva foi usada para frequências de escores atribuídos por pacientes e clínicos. Para comparar as frequências dos pacientes e dos clínicos, foi aplicado o teste Qui-quadrado (p ≤ 0,05). Os pacientes relataram suas restaurações como 52,8% satisfatórias e 47,8% insatisfatórias. Os clínicos reportaram as mesmas restaurações, 82,3% satisfatória e 17,6% insatisfatória. As queixas mais frequentes dos pacientes referiam-se à cor, seguida da forma anatômica, fratura e retenção do material e forma anatômica proximal. Comparando os índices de satisfação e insatisfação dos pacientes com os clínicos, não houve diferença em relação à estética. A frequência de restaurações insatisfatórias por dentistas foi significativamente menor quando as propriedades funcionais e biológicas foram comparadas com as opiniões dos pacientes. As restaurações foram mais frequentemente relatadas como satisfatórias pelos pacientes, sendo as principais queixas relacionadas a questões estéticas. Quando as avaliações dos clínicos e dos pacientes foram comparadas, observou-se que as frequências de restaurações satisfatórias por pacientes e clínicos foram semelhantes em relação às propriedades estéticas e significativamente diferentes em relação às propriedades funcionais e biológicas.

Longitudinal analyses of composite resin restoration on erosive lesions: effect of dentin treatment with a chitosan nanoformulation containing green tea

Aim To evaluate the influence of the biomodification of erosive lesions with a chitosan nanoformulation containing green tea (NanoCsQ) on the clinical performance of a composite resin. Methods The study was performed in a split-mouth, randomized and double-blinded model with 20 patients with 40 erosive lesions. The patient's teeth were randomized into two groups (n=20) according to the surface treatment: 1) Without biomodification (control), and 2) Biomodification with NanoCsQ solution (experimental). The lesions were restored with adhesive (Tetric N-bond, Ivoclar) and composite resin (IPS Empress Direct, Ivoclar). The restorations were polished and 7 days (baseline), 6 months, and 12 months later were evaluated according to the United States Public Health Service (USPHS) modified criteria, using clinical exam and photographics. Data were analyzed by Friedman's and Wilcoxon signed-rank tests. Results No significant differences were found between the control and experimental groups (p=0.423), and also among the follow-up periods (baseline, six months, and 12 months) (p=0.50). Regarding the retention criteria, 90% of the restoration had an alpha score in the control group. Only 10% of the restorations without biomodification (control) had a score charlie at the 12-month follow-up. None of the patients reported post-operatory sensitivity. Conclusion The NanoCsQ solution did not negatively affect the performance of the composite resin restorations after 12 months.

Effects of the green tea catechin epigallocatechin-3-gallate on Streptococcus mutans planktonic cultures and biofilms: systematic literature review of in vitro studies.

This study aimed at performing a systematic review of the literature on the effects of epigallocatechin-3-gallate (EGCG) on Streptococcus mutans planktonic cultures and biofilms. The selected references demonstrated that EGCG suppresses S. mutans acid production by inhibiting the activity of enzymes such as lactate dehydrogenase and FIF0-ATPase. Regarding virulence factors, one study reported a reduction in soluble and insoluble polysaccharide synthesis, another demonstrated that EGCG inhibited GTase activity, and another showed effects of EGCG on the expression of gtf B, C, and D. The effects of EGCG on S. mutans biofilms were reported only by 2 of the selected studies. Moreover, high variability in effective concentrations and microbial assessment methods were observed. The literature suggests that EGCG has effects against S. mutans planktonic cells viability and virulence factors. However, the literature lacks studies with appropriate biofilm models to evaluate the precise effectiveness of EGCG against S. mutans biofilms.

Photoinactivation of multispecies cariogenic biofilm mediated by aluminum phthalocyanine chloride encapsulated in chitosan nanoparticles.

This study aimed to characterize the aluminum phthalocyanine chloride (AlClPc) encapsulated in chitosan nanoparticles (CN) and apply it in antimicrobial photodynamic therapy (aPDT) on multispecies biofilm composed of Streptococcus mutans, Lactobacillus casei, and Candida albicans to analyze the antimicrobial activity and lactate production after treatment. Biofilms were formed in 24-well polystyrene plates at 37 °C for 48 h under microaerophilia. The following groups were evaluated (n = 9): as a positive control, 0.12% chlorhexidine gluconate (CHX); phosphate-buffered saline (PBS) as a negative control; 2.5% CN as release vehicle control; the dark toxicity control of the formulations used (AlClPc and AlClPc + CN) was verified in the absence of light; for aPDT, after 30 min incubation time, the photosensitizers at a final concentration of 5.8 × 10-3 mg/mL were photoirradiated for 1 min by visible light using a LED device (AlClPc + L and AlClPc + CN + L) with 660 nm at the energy density of 100 J/cm2. An in vitro kit was used to measure lactate. The biofilm composition and morphology were observed by scanning electron microscopy (SEM). The antimicrobial activity was analyzed by quantifying colony forming units per mL (CFU/mL) of each microorganism. Bacterial load between groups was analyzed by ANOVA and Tukey HSD tests (α = 0.05). A lower lactate dosage was observed in the aPDT AlClPc + CN + L and CHX groups compared to the CN and AlClPc groups. The aPDT mediated by the nanoconjugate AlClPc + CN + L showed a significant reduction in the viability of S. mutans (3.18 log10 CFU/mL), L. casei (4.91 log10 CFU/mL), and C. albicans (2.09 log10 CFU/mL) compared to the negative control PBS (p < 0.05). aPDT using isolated AlClPc was similar to PBS to the three microorganisms (p > 0.05). The aPDT mediated by the nanoconjugate AlClPc + CN + L was efficient against the biofilm of S. mutans, L. casei, and C. albicans.

Effect of desensitizing dentifrices on eroded dentin wettability / Efeito de dentifrícios dessensibilizantes na molhabilidade da dentina erodida

Objective: To analyze the wettability on the surface of eroded dentin in teeth submitted to abrasive wear with desensitizing dentifrices. Material and Methods: Bovine dentin specimens were polished and immersed in 10 mL of citric acid (pH=3.2) for 2 h. The eroded specimens were submitted to mechanic brushing according to the 4 dentifrices adopted: Colgate Total (control); Colgate Sensitive Pro-Relief; Sensodyne Repair & Protect; or Sensodyne Rapid Relief. Afterwards, it was conditioned in 37% aqueous phosphoric acid solution. Wettability of 80 specimens (n=10) brushed for 7 or 21 days was evaluated by measuring the contact angle between the dentin surface and a drop of the adhesive Single Bond Universal® (3M) with a goniometer. Changes in the surface morphology of 12 specimens (n = 3) brushed for 21 days were followed by confocal laser scanning microscopy (CLSM). Data were analyzed by two-way ANOVA and Tukey test (p > 0.05). Results: Groups treated with desensitizing dentifrices did not differ significantly (p ≤ 0.05). Surface treatment and abrasive wear did not interact significantly (p ≤ 0.05). Brushing along 7 days gave the smallest contact angle value (p ≥ 0.05). CLSM images showed morphological changes for all the groups. Conclusion: The desensitizing dentifrices did not interfere in eroded dentin wettability after brushing along 7 or 21 days. Brushing with any of the dentifrices along 21 days promoted open dentinal tubules.(AU)

Objetivo: Analisar a aplicação de um adesivo na superfície de dentina erodida em dentes submetidos ao desgaste abrasivo com agentes dessensibilizantes. Material e Métodos: Espécimes de dentina bovina foram polidos e imersos em 10 mL de ácido cítrico (pH=3,2) por 2 h. Os espécimes erodidos foram submetidos à escovação mecânica de acordo com os 4 dentifrícios adotados: Colgate Total (controle); Colgate Sensitive Pro-Alívio; Sensodyne Repair & Protect; ou Sensodyne Rápido Alívio. Em seguida, foram condicionados em ácido fosfórico a 37%. A molhabilidade de 80 espécimes (n=10) escovados por 7 ou 21 dias foi avaliada medindo-se o ângulo de contato entre a superfície dentinária com uma gota do adesivo Single Bond Universal® (3M) por um goniômetro. Alterações na morfologia da superfície de 12 espécimes (n = 3) escovados por 21 dias foram seguidos por Microscopia Confocal de Varredura a Laser (MCVL). Os dados foram analisados por ANOVA dois fatores e teste de Tukey (p > 0,05). Resultados: Os grupos tratados com dentifrícios dessensibilizantes não diferiram significativamente (p ≤ 0,05). O tratamento de superfície e o desgaste abrasivo não interagiram significativamente (p ≤ 0,05). A escovação ao longo de 7 dias apresentou o menor valor de ângulo de contato (p ≥ 0,05). As imagens do MCVL mostraram alterações morfológicas para todos os grupos. Conclusão: Os dentifrícios dessensibilizantes não interferiram na molhabilidade da dentina erodida após escovação ao longo de 7 ou 21 dias. A escovação com qualquer um dos dentifrícios ao longo de 21 dias promoveu a abertura dos túbulos dentinários (AU)

Information sources of Brazilian undergraduate dental students during the COVID-19 outbreak: a cross-sectional study

Aim: This cross-sectional study aimed to investigate where Brazilian dental students seek information about COVID-19 by a self-administered web-based questionnaire. Methods: A social network campaign on Instagram was raised to approach the target population. The dental students responded to a multiple-response question asking where or with whom they get information about COVID-19. The possible answers were government official websites or health and education institutions websites, TV Programs, professors, social media, scientific articles, health professionals, and family members. The data were analyzed by descriptive statistics, and the frequency distributions of responses were evaluated by gender, age, type of institution, and year of enrollment. Results: A total of 833 valid responses were received. The main source of information used by the dental students were government official websites or health and education institutions websites, which were reported by 739 (88.7%) participants. In the sequence, 477 (57.3%) participants chose health professionals while 468 (56.2%) chose scientific articles as information sources. The use of social media was reported by 451 (54.1%) students, while TV programs were information sources used by 332 (39.9%) students. The least used information sources were professors, reported by 317 (38.1%) students, and family members, chosen only by 65 (7.8%) participants. Conclusion: Brazilian dental students rely on multiple information sources to stay informed about COVID-19, mainly focusing their information-seeking behavior on governmental and health professional's websites

Effect of grape seed extract on bond strength of restorative material to bleached enamel

Objective: The aim of this study was to evaluate the effect of different concentrations of a natural antioxidant (grape seed extract) on the bond strength of the restorative material to the bleached enamel. Methods: Forty fragments of healthy bovine incisors were randomly divided into four groups (n = 10): Group I: no bleaching; Group II: Bleaching with 35% hydrogen peroxide (HP) and without post-treatment; Group III: Bleaching with 35% HP + 5% grape seed extract; and Group IV: Bleaching with 35% HP + 10% grape seed extract. The bond strength at the adhesive interface was evaluated using the shear test (MPa). The data were analyzed by the analysis of variance (ANOVA) and Tukey test ( =0.05%). The fracture types were also analyzed and classified into: adhesive, cohesive or mixed. Results: Only Group III (bleached + 5% grape seed extract) had a significant increase (p<0.001) in bond strength values when compared to Group II bleached, without post- reatment). All groups showed a predominance of the adhesive type of fracture. Conclusion: It could be concluded that tooth bleaching decreases the bond strength to bleached enamel and 5% grape seed extract applied after dental bleaching improves the bond strength between the restorative material and the bleached enamel.

Objetivo: Este trabalho teve por objetivo avaliar in vitro o efeito de um antioxidante natural (extrato de semente de uva) em diferentes concentrações, na resistência de união do material restaurador ao esmalte clareado. Métodos: Quarenta fragmentos de incisivos bovinos hígidos, foram divididos aleatoriamente em quatro grupos (n=10): Grupo I: sem clareamento; Grupo II: clareado com peróxido de hidrogênio 35% (PH) e sem pós-tratamento; GIII: clareado PH 35% + extrato de semente de uva 5%; e Grupo IV: clareado com PH 35% + extrato de semente de uva 10%. A resistência de união da interface esmalte/material restaurador foi avaliada por meio do teste de cisalhamento (MPa). Os dados foram analisados pela análise de variância (ANOVA) e testes de Tukey ( =0,05%). Os tipos de fratura também foram analisados e classificados em: adesiva, coesiva ou mista. Resultados: Apenas o Grupo III (clareado + extrato de semente de uva 5%) apresentou aumento estatisticamente significante (p<0,001). dos valores de resistência de união comparado ao Grupo II (clareado e sem pós-tratamento). Todos os grupos mostraram um predomínio do tipo de fratura adesiva. Conclusão: O clareamento dental diminui significativamente a força de adesão ao esmalte dental clareado, e o extrato de semente de uva 5% aplicado após o clareamento dental melhora a resistência de união entre o material restaurador e o esmalte clareado.

Non-contact profilometry of eroded and abraded enamel irradiated with an Er: YAG laser

Abstract Literature has reported positive results regarding the use of lasers in the control of erosive lesions; however, evaluating whether they are effective in the control of the progression of erosive/abrasive lesions is important. Objectives This study aimed to evaluate the effect of the Er:YAG laser irradiation in controlling the progression of erosion associated with abrasive lesions in enamel. Material and methods Bovine incisors were sectioned, flattened and polished. Forty-eight enamel slabs were subjected to treatment in an intraoral phase. Twelve volunteers used an intraoral appliance containing one slab that was irradiated with an Er:YAG laser (5.2 J/cm2, 85 mJ, 2 Hz) and another non-irradiated slab on each side of the appliance, during one phase of 5 d, under a split-mouth design. Devices were subjected to erosive challenges (1% citric acid, 5 min, 3 times a day) and abrasive challenges one h after (brushing force of 1.5 N for 15 s) randomly and independently on each side of the device. Measurements of enamel loss were performed via 3D optical profilometry (μm). We analyzed data using the Kruskal-Wallis and Mann-Whitney tests and morphological characteristics via scanning electron microscopy. Results Following erosive and abrasive challenges, the group that was irradiated with the Er:YAG laser presented less loss of structure than the non-irradiated group. The group that underwent erosion and irradiation did not exhibit a significant difference from the non-irradiated group. Conclusion Irradiation with the Er:YAG laser did not control the loss of structure of enamel subjected to erosion but did control abrasion after erosion.

Effect of a Bioactive Glass Ceramic on the Control of Enamel and Dentin Erosion Lesions

Abstract This study evaluated the effect of a bioactive glass ceramic for the control of erosion and caries lesions. Fragments (n=10) of bovine enamel and root dentin received daily application of different treatments (Biosilicate; Acidulated Phosphate Fluoride- APF; Untreated - control) during the performance of erosive cycles. Surfaces were analyzed with 3D optical profilometry to quantify the superficial loss in four periods (1, 7, 14 and 21 days), as well as the lesion depth with confocal laser scanning microscopy. For caries progression assessment, initial Knoop microhardness was measured on enamel bovine fragments. Initial carious lesions were developed and specimens were divided into three groups (n=10), according to the daily topical application (Biosilicate; APF; no application - control), during the de-remineralization cycles for 14 days. Final microhardness was obtained to calculate the change of surface microhardness. Subsurface demineralization was analyzed using cross-sectional microhardness (depths 10, 30, 50, 70, 90, 110 and 220 µm). Data were tested using ANOVA and Tukey's test (a=5%). Results of erosive evaluation showed that Biosilicate promoted the lowest (p<0.05) values of surface loss, regardless of time, for both enamel and dentin; APF promoted lower (p<0.05) surface loss than control; analyzing different periods of time, APF did not show difference (p>0.05) between 14 and 21 days of demineralization. Results of enamel caries assessment showed that Biosilicate resulted in higher (p<0.05) surface and subsurface microhardness than both APF and control-applications. It may be concluded that Biosilicate application showed a higher potential to reduce surface loss and development of erosion and caries lesions.

Resumo Este estudo avaliou o efeito de uma vitrocerâmica bioativa para o controle de lesões de erosão e cárie. Fragmentos (n=10) de esmalte bovino e dentina radicular receberam aplicação diária de diferentes tratamentos (Biosilicato; Fluoreto de Fosfato Acidulado - APF; não tratado - controle) durante a realização de ciclos erosivos. As superfícies foram analisadas com profilometria óptica 3D para quantificar a perda superficial em quatro períodos (1, 7, 14 e 21 dias), bem como a profundidade da lesão com microscopia confocal de varredura a laser. Para a avaliação da progressão de cárie, foi obtida a microdureza Knoop inicial de fragmentos de esmalte bovino. As lesões cariosas iniciais foram desenvolvidas e os espécimes foram divididos em três grupos (n =10), de acordo com a aplicação tópica diária (Biosilicato; APF; sem aplicação - controle) durante os ciclos de desmineralização por 14 dias. A microdureza final foi obtida para calcular a perda da microdureza superficial. A desmineralização sub-superficial foi analisada utilizando microdureza transversal (profundidades 10, 30, 50, 70, 90, 110 e 220 μm). Os dados foram testados utilizando ANOVA e teste de Tukey (α=5%). Os resultados da avaliação erosiva mostraram que o Biosilicato promoveu os menores valores (p <0,05) de perda superficial, independente do tempo, tanto para o esmalte como para a dentina; APF promoveu menor (p <0,05) perda de superfície do que controle; analisando os períodos de tempo, APF não mostrou diferença (p>0,05) entre 14 e 21 dias de desmineralização. Os resultados da avaliação da cárie no esmalte mostraram que o Biosilicato resultou em maiores (p<0,05) valores de microdureza superficial e subsuperficial do que as aplicações APF e controle. Pode-se concluir que a aplicação de Biosilicato apresentou maior potencial de redução da perda superficial e desenvolvimento de lesões de erosão e cárie.

Effect of Er:Yag laser on dentin demineralization around restorations.

The aim of this study was to evaluate the effect of cavity preparation with Er:YAG laser on dentin adjacent to restorations submitted to cariogenic challenge in situ, by subsuperficial microhardness analysis. Bovine incisors were sectioned, flattened, and polished, resulting in 40 dentin slabs. The slabs were randomly assigned to four groups (n = 10), according to the cavity preparation method: I-high-speed handpiece (control); II-Er:YAG laser (160 mJ; 3 Hz); III-Er:YAG laser (260 mJ; 3 Hz); IV-Er:YAG laser (300 mJ; 3Hz). Cavities were restored with composite resin, and the specimens were fixed in intra-oral appliances, which were worn by 10 volunteers for 14 days for simulating cariogenic challenge in situ. During the experimental period, 20% sucrose solution was dripped over each specimen 6 times a day. Samples were removed, sectioned, and examined for subsuperficial Knoop microhardness at 100, 200, and 300 µm from the restoration and at 30 µm from dentin surface. Split-plot analysis of variance showed no significant difference among the cavity preparation techniques (p = 0.1129), among distances (p = 0.9030), as well as no difference in the interaction between the main factors (p = 0.7338). It was concluded that the cavity preparation with Er:YAG laser did not influence on dentin microhardness submitted to cariogenic challenge in situ.

Effect of Metalloproteinase Inhibitors on the Microtensile Bond Strength of Composite Resin to Er: YAG Laser-Irradiated Dentin

Abstract This study evaluated the effect of matrix metalloproteinase (MMP) inhibitors - 2% (CHX) and sodium fluoride (NaF) (5000 ppm) - on microtensile bond strength (μTBS) of composite resin to Er:YAG laser-irradiated dentin after chemical degradation of the bond interface. The occlusal surface of forty sound human molars was removed exposing the dentin surface (n=10), which was polished, irradiated with Er:YAG laser, acid etched and dried. Twenty specimens were rewetted with 2% CHX (control group) and 20 were rewetted with NaF (5000 ppm). The adhesive system was applied and a 4-mm-high plateau of light-cured composite resin was built up. Resin-dentin sticks were obtained with a rectangular cross-sectional area (0.8-1 mm2) and were either stored in water at 37 ?#61616;C for 24 h or submitted to chemical degradation. For chemical degradation, they were immersed in 10% NaOCl aqueous solution for 5 h and rinsed in water for 1 h. The sticks were submitted to microtensile test in a mechanical testing machine at 0.5 mm/min until failure. Fracture pattern was analyzed using SEM. μTBS values were calculated in MPa and submitted to analysis of variance ANOVA (α=0.05). The variance analysis showed that the 'MMP inhibitor' and 'degradation' factors (p=0.214 and p=0.093, respectively) and interaction between the factors were not statistically significant (p=0.143). Mixed failure predominated in all groups. In conclusion, the 2% CHX and NaF 5000 ppm presented similar μTBS of composite resin to laser-irradiated dentin before and after chemical degradation.

Resumo Este estudo avaliou o efeito dos inibidores de metaloproteinase, clorexidina 2% e fluoreto de sódio (5000 ppm), na resistência de união entre a dentina irradiada por laser Er:YAG e a resina composta após a degradação química da interface de união. A superfície oclusal de quarenta molares humanos hígidos (n=10) foi removida expondo uma superfície de dentina, que foi polida, irradiada com laser Er:YAG, condicionada com ácido e seca. Vinte espécimes foram re-umedecidos com clorexidina 2% (Grupo controle) e 20 com fluoreto de sódio (5000 ppm). O sistema adesivo foi aplicado e um platô de resina composta fotopolimerizável de 4 mm de altura foi construído. Palitos de resina-dentina foram obtidos com secção transversal retangular (0,8-1 mm2). Eles foram armazenados em água (24 h a 37 ?#61616;C) ou submetidos a degradação química. Para a degradação química, foram imersos em solução aquosa de hipoclorito de sódio a 10% durante 5 horas e lavados em água durante 1 h. Os palitos foram submetidos ao teste de microtração em uma máquina de ensaios mecânicos a 0,5 mm/min até a fratura. O padrão de fratura foi analisado em MEV. Os valores de resistência de união foram calculados em MPa e submetidos à análise de variância ANOVA (α=0,05). A análise de variância mostrou que os fatores inibidor de metaloproteinases e degradação (p=0,214 e p=0,093, respectivamente), e a interação entre os fatores não foram estatisticamente significantes (p=0,143). A predominância de falha mista foi detectada para todos os grupos. Em conclusão, a clorexidina a 2% e fluoreto de sódio (ppm 5000) apresentaram resistência de união entre dentina irradiada e resina composta semelhante antes e após a degradação química.

Impact of CO2 laser and stannous fluoride on primary tooth erosion.

This study evaluated in vitro the effect of input power of CO2 laser, either associated or not to stannous fluoride (SnF2) gel, for the control of intrinsic erosion in primary teeth. One hundred four enamel slabs (3 × 3 × 2 mm) from human primary molars were flattened and polished. Adhesive tapes were placed on their surface leaving a window of 3 × 1 mm. Slabs were then cycled four times in 0.01 M hydrochloric acid (pH 2, 2 min) and in artificial saliva (2 h) for creation of erosive lesions. Specimens were randomly assigned into eight groups (n = 13) according to fluoride application [absent (control) or 0.4% stannous fluoride gel (SnF2)] and input power of CO2 laser [unlased (control), 0.5, 1.0 or 1.5 W]. The CO2 laser irradiation was performed in an ultra-pulse mode (100 µs of pulse duration), 4-mm working distance, for 10 s. Specimens were then submitted to further erosive episodes for 5 days and evaluated for enamel relative permeability. Fluoride did not show any protective effect for any of the laser-treated groups or control (p = 0.185). However, a significant effect was detected for input power of CO2 laser (p = 0.037). Tukey's test showed that there was a significant statistically difference between specimens irradiated with 0.5 and 1.5 W (p = 0.028). The input power of 0.5 W showed lower permeability. Variation of input power CO2 laser can influence enamel permeability, at the power of 1.5 W which promoted greater permeability.

Effect of Fluoride Varnish Combined with Er:YAG Laser on the Permeability of Eroded Dentin: An In Situ Study

This study evaluated the combined effect of fluoride varnish and Er:YAG laser on the permeability of eroded bovine root dentin. After initial erosive challenge followed by a remineralization period, the specimens were divided in two groups according to the treatment - fluoride varnish and non-fluoride varnish - and were subdivided according to the irradiation protocol: Er:YAG laser (100 mJ, 3 Hz, 12.8 J/cm2per pulse, non-contact and defocus mode) and non-irradiated. After a lead-in period, 7 volunteers wore a palatal device containing 4 specimens that were subjected to erosive challenges. At the first experimental phase, 4 volunteers used specimens treated with fluoride varnish and fluoride varnish+Er:YAG laser and 3 volunteers used specimens treated with non-fluoride varnish and non-fluoride varnish+Er:YAG laser. After a washout period, volunteers were crossed to treatments, characterizing a 2x2 crossover experiment. At the end of the experimental phase, the quantitative response variable was obtained by permeability analysis and the qualitative response by scanning electron microscopy (SEM). Two-way ANOVA and Tukey-Kramer's test revealed that specimens treated with fluoride varnish+Er:YAG laser showed the lowest permeability and a significant difference was found between this group and the others. When varnish (fluoride/non-fluoride) was applied in the absence of Er:YAG laser, higher permeability was found when compared to the laser-treated groups. SEM evaluations showed partially or completely obliterated dentinal tubules when specimens were treated with fluoride varnish+Er:YAG laser. It may be concluded that Er:YAG laser was able to control the permeability of eroded root dentin and the combination with fluoride varnish increased laser action.

Resumo Esse estudo avaliou o feito combinado do verniz fluoretado ao laser de Er:YAG na permeabilidade da dentina radicular erodida. Fragmentos de dentina radicular bovina, foram submetidos a um desafio erosivo inicial com ácido cítrico, que foi seguido por um período de remineralização. Posteriormente, os espécimes foram divididos em relação aos tratamentos: verniz (fluoretado e não fluoretado) e subdivididos de acordo com a irradiação: laser de Er:YAG (100 mJ, 3 Hz, 12.8 J/cm2 por pulso, sem contato e modo não focado) e não irradiado. Após um período de lead in, 7 voluntários utilizaram um dispositivo palatino contendo 4 espécimes que foram submetidos a desafios erosivos. Na primeira fase do experimento, 4 voluntários utilizaram dispositivos com fragmentos tratados com verniz fluoretado e verniz fluoretado+laser de Er:YAG e 3 voluntários utilizaram espécimes tratados com verniz não fluoretado e verniz não fluoretado+laser de Er:YAG. Depois de um período de wash-out, os voluntários foram cruzados em relação aos tratamentos, caracterizando um experimento cross-over 2x2. Ao final de cada fase experimental, a variável resposta quantitativa foi obtida através da análise de permeabilidade e a qualitativa por microscopia eletrônica de varredura (MEV). A ANOVA dois critérios e teste de Tukey-Kramer revelou que as amostras tratadas com verniz fluoretado+laser de Er:YAG mostraram menor permeabilidade e uma diferença significativa foi encontrada entre este grupo, quando comparado aos demais grupos. Quando o verniz (fluoretado/não fluoretado) foram aplicados na ausência do laser de Er:YAG maiores valores de permeabilidade foram encontrados quando comparados com os grupos irradiados com o laser. A MEV demostrou túbulos dentinários parcialmente ou completamente ocluídos quando as amostras foram tratadas com verniz fluoretado+laser de Er: YAG. Pode-se concluir que o laser de Er:YAG foi capaz de controlar a permeabilidade da dentina radicular erodida e essa ação é aumentada quando o laser está associado ao verniz fluoretado.

Surface Roughness of Composite Resins Subjected to Hydrochloric Acid

The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite (FiltekTM Supreme), nanohybrid composite (Ice), and acid challenge (n=10) at 2 levels: absence and presence. Acid challenge was performed by immersion of specimens in hydrochloric acid (pH 1.2) for 1 min, 4 times per day for 7 days. The specimens not subjected to acid challenge were stored in 15 mL of artificial saliva at 37 oC. Afterwards, all specimens were submitted to abrasive challenge by a brushing cycle performed with a 200 g weight at a speed of 356 rpm, totaling 17.8 cycles. Surface roughness measurements (Ra) were performed and analyzed by ANOVA and Tukey test (p≤0.05). Surface roughness values were higher in the presence (1.07±0.24) as compared with the absence of hydrochloric acid (0.72±0.04). Surface roughness values were higher for microhybrid (1.01±0.27) compared with nanofilled (0.68 ±0.09) and nanohybrid (0.48±0.15) composites when the specimens were not subjects to acid challenge. In the presence of hydrochloric acid, microhybrid (1.26±0.28) and nanofilled (1.18±0,30) composites presents higher surface roughness values compared with nanohybrid (0.77±0.15). The hydrochloric acid affected the surface roughness of composite resin subjected to brushing.

Este estudo avaliou a influencia do ácido clorídrico na rugosidade superficial de resinas compostas submetidas a escovação. Sessenta corpos de prova medindo 2 mm de espessura x 6 mm de diâmetro foram confeccionados e utilizados como unidades experimentais. O presente estudo envolve uma análise fatorial 3x2, onde os fatores foram resina composta (n=20), com 3 níveis: resina composta microhíbrida (Z100), nanoparticulada (Filtek TM Supreme) e nanohíbrida (Ice); e desafio ácido (n=10), com 2 níveis: ausência e presença. O desafio ácido foi realizado por meio da imersão em ácido clorídrico (pH 1,2) por 4 h diárias, 1 min cada imersão, durante 7 dias. Os espécimes que não foram submetidos ao desafio ácido foram armazenados em 15 mL de saliva artificial a 37 °C. Todos os espécimes foram submetidos ao desafio abrasivo. O processo de escovação foi realizado com 200 g de peso, com velocidade de 356 rpm, totalizando 17,8 ciclos. As medidas de rugosidade superficial (Ra) foram realizadas e analisadas por meio da ANOVA e teste de Tukey (p<0,05). Os valores de rugosidade superficial foram maiores na presença (1,07±0,24)quando comparado com a ausencia do ácido hidroclorídrico (0,72±0,04). A resina microhíbrida (1,01±0,27) apresentou maior rugosidade superficial que as resinas nanoparticulada (0,68±0,09) e nanohíbrida (0,48±0,15) quando os espécimes não foram submetidos ao desafio ácido. Na presença do ácido hidroclorídrico, a resina microhíbrida (1,26±0,28) e a resina nanoparticulada (1,18±0,30) apresentou maior valor de rugosidade superficia comparado com a resina nanohíbrida (0.77±0.15). O ácido hidroclorídrico influenciou a rugosidade superficial da resina composta submetida a escovação.

In situ investigation of the effect of TiF4 and CO2 laser irradiation on the permeability of eroded enamel.

OBJECTIVE: Interest in erosion and its role in tooth wear has increased considerably. Due to the limited contribution of patients in modifying their dietary habits, therapeutic resources aiming to reduce the progression of erosion-like lesions have been discussed. This study sought to evaluate the effect of TiF4 and CO2 laser in controlling the permeability of in situ eroded enamel. DESIGN: Ten volunteers wore an intraoral palatal device containing two enamel slabs, treated with TiF4 gel and TiF4 gel + CO2 or placebo gel and placebo gel + CO2. After the washout period, volunteers were crossed over to the other treatment. During both phases, specimens were submitted to erosive challenges and then evaluated for permeability measured as the percentage of copper ion penetration over the total enamel thickness. RESULTS: Two-way analysis of variance (ANOVA) revealed that there was a significant interaction between the factors under study (p = 0.0002). Tukey's test showed that TiF4 significantly reduced the enamel permeability of eroded enamel specimens, regardless of whether CO2 laser irradiation was performed. CONCLUSIONS: It may be concluded that when the placebo gel was applied, CO2 laser was able to reduce enamel permeability; however, when TiF4 was applied, laser irradiation did not imply a reduction in permeability. TiF4 provided a lower permeability of eroded enamel, regardless of whether the CO2 laser was used.

In situ study of the anticariogenic potential of fluoride varnish combined with CO2 laser on enamel.

OBJECTIVE: This in situ study evaluated the effect of fluoride varnish combined with CO2 laser in controlling enamel demineralization caused by cariogenic challenges. DESIGN: In a crossover study conducted in 2 phases of 14 days each, 14 volunteers (n = 14) wore palatal appliances with bovine enamel slabs treated with fluoride varnish + CO2 laser (FV + CO2), fluoride varnish (FV), nonfluoride placebo varnish (PV) and nonfluoride placebo varnish + CO2 laser (PV + CO2). Drops of sucrose solution were dripped onto enamel slabs allowing the accumulation of biofilm. At the first phase, half of the volunteers received 4 enamel slabs treated with FV while the remainders received slabs exposed to the PV with and without CO2 laser. In the second phase, the vonlunteers were reversed treatments. The slabs were evaluated for cross-sectional microhardness (CSMH) and the concentration of loosely bound fluoride (CaF2) and firmly bound fluoride (FAp). The concentration of fluoride in biofilm were also determined. RESULTS: Two-way ANOVA showed that the CSMH values were higher in laser-irradiated enamel, regardless of the fluoride varnish. Friedman test showed that FV group presented significantly larger amount of fluoride in biofilm (P < 0.05). In the enamel, the largest amount of fluoride was found in the groups FV + CO2, which was not different from FV (P > 0.05). CONCLUSION: The synergistic effect of fluoride varnish and CO2 laser on enamel demineralization was not observed, however, CO2 laser reduces enamel demineralization. CLINICAL SIGNIFICANCE: CO2 laser might reduce the demineralization of subsurface enamel, although its association with a high concentrated fluoride therapy may not result in a positive synergistic interaction.

Effect of Er:YAG laser on enamel demineralization around restorations.

This study evaluates in situ the effect of erbium-doped yttrium aluminum garnet (Er:YAG) laser parameters on the development of caries-like lesions adjacent to dental restorations. One hundred fifty bovine enamel slabs were randomly allocated among 15 volunteers. The specimens were subdivided into ten groups: nine experimental groups prepared with Er:YAG laser (300 mJ output, frequency of 2, 4 or 6 Hz, water flow rate of 2.0, 5.0, or 8.0 mL/min) and one control group (high-speed handpiece). The prepared cavity was restored with a composite resin, and the slabs were mounted on palatal appliance to be installed in the volunteers to the cariogenic challenge. After this, the specimens were sectioned to the longitudinal microhardness measurements. Data were submitted to Friedman and Wilcoxon paired tests. All groups prepared with Er:YAG laser demonstrated microhardness values higher than those prepared with high-speed handpiece, which showed the lowest microhardness values (24.86). The group prepared with Er:YAG laser (2 Hz-2.0 mL/min) showed the highest microhardness values (152.43), followed by those prepared with Er:YAG laser (2 Hz-5.0 mL/min) (133.08) and Er:YAG laser (2 Hz-8.0 mL/min) (91.61), respectively. The groups Er:YAG laser with 4 and 6 Hz of frequency and water flow rates of 2.0, 5.0, and 8.0 mL/min showed microhardness values lower than the groups cited above and showed statistical similarity among them. The Er:YAG laser parameters employed to cavity preparation influenced the acid resistance of the irradiated substrate, and the Er:YAG laser was capable to control the development of caries-like lesions around composite resin restorations.